TECHNICAL SUBMITTALS

G+4+R RESIDENTIAL
BUILDING ON PLOT NO:
PROJECT: 1240411, AL MURAQQABAT,
DUBAI, UAE

CLIENT: CAPITAL UNITED LLC

ENGINEERING
CONSULTANT: CONSULTANTS GROUP
(ECG)

ZABEEL CONTRACTING CO
CONTRACTOR: LLC

SUPPLIER: LAPIZ BLUE GENERAL

TRADING

KERABOND T
PRODUCT:
 CONTENT

COMPANY PROFILE ........................................................................................ 1

TRADE LICENSE .............................................................................................. 2
ISO CERTIFICATE / EMIRATESGBC MEMBERSHIP CERTIFICATE / ICV CERT ...... 3
DATA SHEET ................................................................................................... 4
GEV CERTIFICATE ........................................................................................... 5
VOC CERTIFICATE ........................................................................................... 6
METHOD STATEMENT .................................................................................... 7
SAFETY DATA SHEET....................................................................................... 8
TEST REPORTS ................................................................................................ 9
APPROVALS ................................................................................................. 10
PROJECT REFERENCES .................................................................................. 11
COMPANY
PROFILE
MAPEI IN THE REGION
More than 15 years of successful business
in the Middle East Region
Mapei Construction Chemicals LLC is Mapei’s UAE subsidiary. Created in line with
Mapei’s globalization strategy to be closer to the market, it boasts a state-of-the-art
manufacturing facility based on a 40,000 m2 plot at Dubai Investments Park (DIP).
Products are manufactured to the most stringent health, safety, and environmental
requirements and comply with the latest material standards, such as GSO:
ISO 13007, EN 13818, EN 1504, & EN 934. Mapei Construction Chemicals LLC has
implemented and maintains the ISO 9001:2015 Quality Management System, ISO
14001:2015 Environment Management System, and ISO 45001:2018 Occupational
Health and Safety Management System.
Products are tested in one of the region’s most advanced temperature and
humidity-controlled QA/QC laboratories. Mapei also offers a unique stone testing
service, where natural or artificial stone can be tested and classified for stability
and absorption. This enables the specification of the most suitable and durable
installation materials, such as screed and adhesives. Mapei also has a commercial
and technical training centre conveniently located in Dubai to ensure our
customers’ highest levels of service and support.

Some of our most notable projects over the last 15 years;

Hospitals Transportations
• Cleveland Clinic • Dubai Metro
• Mafraq Hospital • Metro Route 2020
• Burjeel Hospital • Riyadh Metro
• Al Ain Hospital • Khorfakkan Roads & Tunnel
• Mediclinic Park View Hospital • Etihad Rail

Hotels Shopping Malls

• Burj Khalifa • Sharjah City Centre
• Nikki Beach Resort & Spa • Ajman City Centre
• Atlantis Hotel • Sahara Centre
• Armani Hotel • Mall of Emirates
• Fairmont Hotel, Abu Dhabi • Dubai Mall Expansion
• Sofitel Palm Jumeirah • Al Reem Mall
• Le Meridien Mina Seyahi • Dubai Hills Mall
• Emerald Palace Kempinski • Nakheel Mall
• Emirates Palace Hotel • Big Box Festival Plaza
• Address Harbour Point-Emaar
• Atlantis the Royal Residential
• One Za’abeel • Presidential Palace
• Bluewaters Island
Public Buildings
• Saadiyat Island
• Grand Mosque
• Emaar Downtown Towers
• Al Ain Mosque
• Sobha Hartland
• Sharjah Mosque
• Expo Village
• ADIB Digital Bank
• Mohammed Bin Rashid Library • Qaryat Al Hidd Developments
• Address Residences
Entertainments
• Dubai Frame Airports
• Ferrari World • Dubai International Airport Terminal 3
• City Walk • Renovation of Dubai International Airport
• Opera House Terminal 1 & 2
• IMG World • Abu Dhabi Midfield Terminal
• Lego Land • Maktoum International Airport
• Expo 2020 Dubai
Universities
Museums • New York University
• Louvre Museum • Khalifa University

2
MAPEI FIGURES

4.0
32
Billion Euros
consolidated turnover in 2022

Research centres in 20 countries

More than

11,900
102
Employees

7,000
More than

Subsidiaries in 57 different countries

Products for the building industry
of Mapei Group

100,000
More than

Tons of CO2 offset

90
Plants in 5 continents,
in 35 different countries

70,000
More than

Clients around the world

238,000
Professionals from the
sector involved in Mapei
training courses

27,900 700
Products with EPD
(Environmental Product Declaration)
Tons of products shipped every day

3
THE STORY OF MAPEI
With strength and passion,
since 1937.
Ours is a great Italian story which begins on the outskirts of Milan with Rodolfo Squinzi, the company’s founder, who began
producing Auxiliary Materials for the Building Industry (MAPEI in Italian stands for “Materiali Ausiliari Per l’Edilizia e l’Industria”).
It was his idea to focus on a niche market of the sector, adhesives for floor and wall coverings, and was the first step on the
road to success. In the 60’s, as the Italian ceramics market exploded, Mapei was ready to seize the opportunity by offering a
range of products that made the laying of ceramic tiles easier and safer by replacing traditional cementitious mortar.
Those years were crucial for Mapei to understand the value of Research, which quickly became one of the main drivers
behind the company’s development. Mapei started producing new types of adhesives, but also sealants, special mortars,
waterproofing products and admixtures for concrete.
Towards the end of the 70’s, Mapei started looking towards International markets and opened its very first facility outside the
home country, in Canada. This was how the company’s expansion across all the continents began, turning Mapei into a solid
reality during the 80’s through the opening of further production facilities in the most strategic areas for the global building
market.
“The capacity to interpret the trends of the sector of adhesives and chemical products for the building industry and the ability to
constantly remain one step ahead in order to bring innovative products to the market to meet its emerging needs.”
This was what Rodolfo Squinzi saw as Mapei’s mission, a mission which was accomplished and then further developed in an
extraordinary way by his son Giorgio, who succeeded him. Giorgio ran Mapei for 35 years – up to the 2nd October 2019, when
he passed away – with solid ethics and a special interest in people that made him well-known among his employees and co-
workers. From his father, Giorgio Squinzi inherited not only his passion for work, chemistry and business, but also for cycling.
And it was this latter passion that gave rise to his most famous quote, one which has been a guide and inspiration for all those
who have collaborated with Mapei ever since: “Never stop pedaling”.

OVER 85 YEARS OF EXCELLENCE

Day in day out, construction sites all
around the world can count on Mapei.
For over 85 years, the Mapei team has been providing solutions of excellence for the building market. All around the world,
we take part in both the construction and the restoration and preservation of buildings of historical and artistical value.
To us, quality in construction really makes the difference and this is what made us global leaders in the production of
adhesives, sealants and chemical products for the building industry.
Wherever we go, our corporate philosophy accompanies us: first-class specialisation, unrivalled know-how,
internationalisation, research and development to create increasingly advanced products, customised service for our
clients, undivided attention to the economic, social and productive sustainability of our company, as well as care for
the health of installers and end users of our products, while always acknowledging the value of every single member
of the world of Mapei.

4
 THE FUTURE OF MAPEI
The challenges thrown down
by the market require an
increasingly wider vision, as well
as more innovation and a focus on
sustainability.
We are the third generation of a family of entrepreneurs. And just like our grandfather, Rodolfo, and our father, Giorgio,
we have the same irrepressible enthusiasm in our DNA, the desire to find new solutions and the capacity to reach
ambitious goals.
We run what has become a leading company in its sector, thanks not only to the quality of our products, but also
a winning mindset and a great and close-knit team that manages the business according to interdependent social,
environmental and economic values.
An increasingly complex future awaits us in an increasingly globalised world where everything moves and will continue
to move faster and faster. And where the sustainability of our choices towards the environment and society in general
will be an increasingly essential requirement to guarantee a better world for the generations to come. Nonetheless, we
know that the great technical, human and ethical heritage that made Mapei great in all these years allows us to look to
tomorrow without fear and with the same level of trust, to be, as always, the architects of our future.

Veronica and Marco Squinzi

Gold Coast, Australia

Jewel

5
SUSTAINABILITY
Experience, research and innovation
to build a sustainable future together.
The ability to offer the best and most innovative and lower consumption of materials and energy for
solutions, to help design and construct according their construction.
to eco-sustainable principles, is a fundamental Our choice looks to the future and comes from
Tons of CO2

commitment for Mapei. This requires a sense of our constant commitment to research into
responsibility and the ability to make solid choices innovative, efficient formulas which can be
offset

in order to supply designers, contractors, workers integrated to form complete application systems.
and clients with products which are safe, reliable, Maintaining quality standards of excellence
durable over the years and which have the also requires significant, targeted investments.
100,000

lowest impact possible on the environment. This Excellence, however, is not just something you
means safeguarding the environment and our declare: what we communicate is measurable,
health and uniting quality architecture and R&D, measured and certified by external bodies.
thanks to the experience matured by the company Mapei promotes total offset of CO2 emitted during
through operating on the most important the life cycle of its products through the purchase
construction sites around the world. Mapei makes of certified environmental credits to encourage
More than

a substantial contribution to the concept of “green” the implementation of renewable energy and
building by formulating products made from reforestation projects.
innovative, recycled and ultra-lightweight raw Mapei concretely promotes sustainability by joining
materials, specifically developed to reduce energy international programmes and organizations,
consumption and to have very low emission levels among which the Responsible Care initiative that
of volatile organic compounds. Another important is the commitment to sustainable development
contribution to eco-sustainability is made through and the LEED system Leadership in Energy and
the development of products with improved Environmental Design – developed by the US Green
mechanical performance characteristics and Building Council for the design and construction of
durability which, by allowing a longer life cycle of eco-compatible buildings.
structures, leads to an inevitable reduction of waste

6
 SUSTAINABILITY

more sustainable for the

PLANET

Mapei thinks about the future when creating energy consumption and to have very low emission
products and offers innovative solutions for of volatile organic compounds (VOC). To simplify
designing and constructing in an eco-sustainable the work of designers, Mapei has created the
way. We contribute towards a quality, durable P.A.S.S. system (Profile, Aspects and Synthesis
building industry through products formulated of Sustainability), documents that verify the
using innovative, ultra-lightweight raw materials conformity of a specific Mapei product with respect
made from recycled materials, developed to reduce to the criteria of the LEED protocol.

more sustainable for

PEOPLE
7
For Mapei, preserving the planet is a concrete many of its solutions. Products are considered to
commitment: day after day, we study solutions have numerous effects on the environment: from
that have an increasingly lower impact on the global warming to depleting our planet’s natural
environment. A result achieved by monitoring resources and the influence they have on ecosystems.
and minimising the effects generated by products In the construction sector, EPDs are a fundamental
throughout their entire life cycle, from manufacturing element and help clients choose products with a
to packaging and from use to disposal. To document low impact on the environment in order to meet
the effects a product has on the environment, the requirements of organisations and certification
Mapei uses EPDs (Environmental Product protocols for sustainable building.
Declarations) the company has at its disposal for

more sustainable in
PROJECTS
For Mapei, responsibility towards the local development of its employees. The bond we have
community means guaranteeing and maintaining with the local community and territory is also
an open, transparent and direct relationship fundamental. Mapei collaborates with the scientific
with all the company’s contacts, both internal community, training institutes and University
and external. Mapei studies and develops research centres to share sustainable ideas and
effective solutions to improve living comfort know-how. What is more, the company contributes
such as soundproofing, Radon abatement to the sustainable development of the territory and
and fire-protection systems and anti-seismic local communities where it operates with support
strengthening solutions. Mapei is a firm believer initiatives centred on sport, culture and care for
in the importance of training and the professional those around us.

8
RESEARCH & DEVELOPMENT
Intense research and
development in the name of
innovation and sustainability.
Research centres

Research and Innovation have always Mapei’s research scientists work within
in 20 countries

been the drivers behind Mapei’s growth a global network comprising of 32 main
and Mapei has always channeled Centres, with our Corporate Research
significant investments into Research Centre in Milan acting as a central
& Development. Forward-thinking, analysis laboratory and central hub to
cross-disciplinary and expertise are the coordinate the activities of the other
32

watchwords for Mapei R&D. The fast pace 31 laboratories. The R&D laboratories,
of the markets requires an immediate equipped with the most sophisticated
reaction in the creation of new products. equipment available, work in close contact
The primary objective of Mapei’s research with each other, and also collaborate with
is to provide users with innovative and, prestigious universities, and scientific
above all, safe, sustainable and lasting and industrial research institutes. They
solutions to improve all aspects of site also provide support to the Technical
work, including the most complex and Services Department to help solve
difficult ones. For Mapei it is not possible all the problems and reply to the
to stop innovating: it would mean most complicated requests from our
stopping a growth process that is an customers, and are flanked by the quality
integral part of our corporate vision. control laboratories, present in all the
A considerable amount of the Group Group’s 90 production facilities.
members are employed in this sector
and the majority of the new resources are
hired for R&D.

Felcsút, Hungary
Puskas Football Academy
Pancho Arena

9
PRODUCTION
Our production system: powerful,
efficient, flexible and sustainable.
Cutting-edge production technology is used in Mapei’s
27,900
shipped every day
Tons of products

production facilities, allowing the intense rhythm of the

entire chain to be flanked by constant quality control, from
raw materials to final packaging.
90 production facilities in 5 continents and in 35 different
countries. 27,900 tons of finished products leave our
production facilities every day (6.7 million tons per year)
along with just as many tons of raw materials to keep sites
supplied all around the world. These are the figures that
represent Mapei. And the results are there for all to see:
optimisation of logistics costs, proximity to our customers, a
guarantee of maximum efficiency of production processes
with total respect for the environment and the local
expectations.

PRODUCTS
25 product lines.
An incomparable range offered for
every site around the world.
industry of the Mapei Group

With its vast range of products, more than 7,000 in total,

Products for the building

1. Products for ceramics and stone materials

Mapei helps improve the characteristics of buildings, from 2. Complementary products for installation work

anti-seismic upgrading to the healthiness of the 3. Products for cleaning, maintaining

and protecting surfaces
surroundings where they are used. 4. Products for resilient, LVT, textile materials
We meet all our customers’ requirements with the widest 5. Products for sports flooring
offer of building products in the world. Our commitment
6. Products for wooden flooring
ranges from the processing of raw materials up to the
7. Products for cementitious and resin flooring
selection of best resources, to deliver the best possible
8. Products for acoustic insulation
product every time. Ours are the most innovative
7,000

9. Products for building

products for the building industry, developed to reduce
10. Admixtures for concrete
energy consumption, manufactured locally in production
11. Architectural stone paving
facilities that respect the environment, are safe for
12. Architectural exposed aggregate concrete surfaces
workers and end users alike and certified according to the
13. Products for CFS industrial flooring
highest official standards.
More than

14. Products for structural strengthening

With their cutting-edge technology, Mapei products
15. Products for masonry restoration
meet all the needs of designers and end users alike,
16. Products for thermal insulation
supplying the best solutions each and every time. Mapei
17. Wall protective and decorative coatings
is aimed specifically at the needs and evolution of the
18. Products for waterproofing
market.
19. Waterproofing products for roofing
Often invisible, always indispensable:
20. Products for underground constructions UTT
such are all Mapei products.
21. Elastic sealants and adhesives

22. Products for the marine industry

23. Cement additives C-ADD

24. Asphalt pavements

10 25. Profiles for floor and wall coverings

QUALITY
We work to produce constant Quality:
for our customers, contractors, the
environment and our corporate
culture.
different countries
continents, in 35
Plants in 5

Mapei plays an important role as world production facilities have been awarded
leader in the sector of chemical products OHSAS 18001 or ISO 45001 certification
for the building industry through the for their Occupational Health and Safety
constant improvement in the satisfaction Management Systems. Since 2017 the
90

of its customers and of all those involved Sustainability Report has been edited to
in the industry (employees, suppliers, take stock of all Mapei S.p.A. operations in
local communities, local authorities and the realm of social responsibility; starting
proprietors). Our Code of Ethics is our from 2023 the Sustainability Report
identity document. Our management includes the whole Mapei Group.
systems are the foundation stones of our
corporate culture: quality, environment,
safety, sustainability and social
responsibility. A Quality Management
System has been applied by Mapei since
1994. It is certified as compliant with
ISO 9001 standards and, since then, has
been constantly updated. Mapei’s main
production facilities apply an Environmental
Management System compliant with
ISO 14001 standards. And, every year,
the programme is extended to include
an increasing number of the Group’s
production facilities around the globe.
It is a source of great pride that many of our

Mattighofen, Austria
KTM Motohall

11
TRAINING
We implement the best training
methods. And the results prove us right.
Technical training has an important role to play for Mapei and we promote refresher courses and
involved in Mapei
training courses
from the sector

installation workshops all around the world to perfect the application techniques for our products.
Professionals

The courses are held by Mapei Technical Services and our expert technicians through practical
demonstrations, audio-visual training and the distribution of technical and information packs. And to
reach sites directly, Mapei also uses a special motor-home which is available for a number of countries,
a kind of mobile training centre which allows us to form a wider network of training opportunities
anywhere we wish. Just as important is on-line training using the latest digital technology. Periodically,
238,000

Mapei organises technical refresher conventions and seminars, both in form of lectures and webinars,
in conjunction with various Chartered Bodies for designers, site managers and specialists from the
construction sector.
Mapei is an accredited Advanced Training Body for the National Council of the Association of
Architects Landscape Planners and Conservationists, authorised to carry out training work and award
professional training credits. Over 6,700 events are carried out at the various Mapei training centres,
our specification centres, throughout Italy and the rest of the world, including France, Norway,
Germany, Singapore, United States, Poland and Hungary, just to mention a few. The events always
involve expert speakers from the industry and focus on cutting-edge technical issues in the building
and design industries.

CONSULTANCY AND
TECHNICAL ASSISTANCE
Designers, contractors, users,
building suppliers: all together to
work better and to get long-lasting
results.
Clients around
the world

All those who use Mapei products can see for themselves at first hand, day after day, how this choice
leads to optimising their work, the maximum application yield and perfect results, under all conditions.
Mapei is not only a supplier, but a partner for all those who work in this sector.
70,000

From the constant, ongoing exchange of experience and ideas with our customers and building
suppliers, Mapei takes all their comments on board to guide innovation and widen its product lines and
references. From the smallest to the largest sales points for ceramics and building materials, you will
discover how Mapei quality is not limited to the product itself, but extends to the competence of the
sales team, the passion of our retailers and the value of their advice.
Our clientèle can also take advantage of our Technical Services Department and their constant, expert
More than

support, from the design phase right up to the execution phase, to guarantee an end result that always
lives up to their expectations.

12
 ‫رخصة صناعية‬
Industrial License
License Details / ‫تفاصيل الرخصة‬
License No. 604007 ‫رقم الرخصة‬

‫م‬.‫م‬.‫ذ‬.‫مابي لكيماويات البناء ش‬ ‫اسم الشركة‬

Company Name MAPEI CONSTRUCTION CHEMICALS L.L.C
‫م‬.‫م‬.‫ذ‬.‫مابي لكيماويات البناء ش‬ ‫السم التجارى‬
Trade Name MAPEI CONSTRUCTION CHEMICALS L.L.C

Legal Type Limited Liability Company - Single Owner(LLC - SO) (.‫م‬.‫م‬.‫ الشخص الواحد )ذ‬- ‫شركة ذات مسؤولية محدودة‬ ‫الشكل القانونى‬
Expiry Date 09/12/2024 ‫تاريخ النتهاء‬ Issue Date 10/12/2007 ‫تاريخ الصدار‬

D&B D-U-N-S ® 851038211 ‫الرقم العالمي‬ Main License No. 604007 ‫رقم الرخصة الم‬
No.
Register No. 1589534 ‫رقم السجل التجارى‬ DCCI No. 169129 ‫عضوية الغرفة‬

License Members / ‫الطراف‬

Share / ‫الحصص‬ Role / ‫الصفة‬ Nationality / ‫الجنسية‬ Name / ‫السم‬ No./‫رقم الشخص‬

1,000.00% Shares Owner / ‫مالك‬ Italy / ‫ايطاليا‬ ‫مابي اس بي ايه‬ 263312

‫حصص‬
MAPEI SPA
Manager / ‫مدير‬ Italy / ‫ايطاليا‬ ‫ستيفانو نزاريو لويجى اياناكون‬ 397479
STEFANO NAZARIO LUIGI
IANNACONE

License Activities / ‫نشاط الرخصة التجارية‬

Fire Resistant & Retardant Materials Manufacturing ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
Building & Construction Materials Trading ‫تجارة مواد البناء‬
Construction Chemicals Manufacturing ‫صناعة المواد الكيماوية لغراض البناء‬
Fire Resistant & Retardant Materials Trading ‫تجارة المواد المقاومة والمانعة لنتشار الحريق‬
Construction Chemicals Trading ‫تجارة المواد الكيماوية لغراض البناء‬
Address / ‫العنوان‬
Phone No 971-4-8156666 ‫تليفون‬ P.O. Box 73869 ‫صندوق بريد‬
Fax No 971-4-8156655 ‫فاكس‬ Parcel ID 597-191 ‫رقم القطعة‬
Mobile No 971-50-9966558 ‫هاتف متحرك‬ noor@fastlinkbms.com Email / ‫البريد اللكتروني‬

‫مجمع دبي للستثمار‬-‫بردبي‬-)‫مخزن ملك دبي انفستمنت بارك (ش ذ م م‬

Remarks / ‫الملحظات‬
2016-12-14 ‫تم اضافة وانسحاب شريك‬

Print Date 08/12/2023 11:47 ‫تاريخ الطباعة‬ Receipt No. 15388302 ‫رقم اليصال‬
‫اتصالت( للحصول‬/‫ )دو‬6969 ‫ أرسل رقم الرخصة إلى‬،‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‬
.‫على اذن الدفع‬ Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. . ‫احصل على زوهو ون مجانا‬
‫للسنة الولى‬
Zoho.com/det

‫لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬. ‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي‬
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
 ‫شهادة شهر قيد شركة فى السجل التجارى‬
‫‪Commercial Register‬‬
‫تفاصيل القــيد ‪Register Details /‬‬
‫‪Main Lice. Nr‬‬ ‫‪604007‬‬ ‫‪ Register No.‬رقم الرخصة الم‬ ‫‪1589534‬‬ ‫رقم القيد‬

‫‪Company‬‬ ‫مابي لكيماويات البناء ش‪.‬ذ‪.‬م‪.‬م‬

‫‪Name‬‬ ‫‪MAPEI CONSTRUCTION CHEMICALS L.L.C‬‬
‫‪Legal Type‬‬ ‫شركة ذات مسؤولية محدودة ‪ -‬الشخص الواحد )ذ‪.‬م‪Limited Liability Company - Single Owner(LLC .‬‬ ‫الشكل القانونى‬
‫)‪- SO‬‬ ‫م‪(.‬‬
‫‪Expiry Date‬‬ ‫‪09/12/2024‬‬ ‫‪ Reg. Date‬تاريخ النتهاء‬ ‫‪16/12/2007‬‬ ‫تاريخ الصدار‬
‫‪D&B D-U-N-S‬‬ ‫®‬ ‫الرقم العالمي‬
‫‪No.‬‬ ‫‪851038211‬‬

‫تفاصيل راس المال ‪Capital Details /‬‬

‫‪Nominated‬‬ ‫‪43,000,000.00‬‬ ‫السمى‬
‫‪Paid‬‬ ‫‪43,000,000‬‬ ‫المدفوع‬
‫‪No. of Shares‬‬ ‫‪43,000‬‬ ‫عدد السهم‬
‫‪Currency‬‬ ‫‪UAE Dirhams‬‬ ‫درهم اماراتي‬ ‫العملة‬

‫عنوان الرخصة ‪License Address /‬‬

‫مخزن ملك دبي انفستمنت بارك (ش ذ م م)‪-‬بردبي‪-‬مجمع دبي للستثمار‬

‫عنوان السجل التجاري ‪Commerce Address /‬‬

‫مخزن ملك دبي انفستمنت بارك )ش ذ م م(‪-‬بردبي‪-‬مجمع دبي للستثمار‬

‫أنشطة السجل ‪Register Activities /‬‬
‫‪Construction Chemicals Manufacturing‬‬ ‫صناعة المواد الكيماوية لغراض البناء‬
‫‪Fire Resistant & Retardant Materials Manufacturing‬‬ ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
‫‪Building & Construction Materials Trading‬‬ ‫تجارة مواد البناء‬
‫‪Fire Resistant & Retardant Materials Trading‬‬ ‫تجارة المواد المقاومة والمانعة لنتشار الحريق‬
‫‪Construction Chemicals Trading‬‬ ‫تجارة المواد الكيماوية لغراض البناء‬

‫‪Print Date‬‬ ‫‪08/12/2023‬‬ ‫‪11:47‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪15388302‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪) 6969‬دو‪/‬اتصالت( للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message (SMS). Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 (Du/ Etisalat) to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا ‪.‬‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬

‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
 MAPEI CONSTRUCTION CHEMICALS L.L.C
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Investments Park 2 - . Dubai () - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 9001:2015
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material.
IAF: 12

Original cycle start date by another certification body: 24-February-2012

Expiry date of previous cycle: 06-July-2023

Certification / Recertification Audit date: 10-May-2023
Certification/Recertification Cycle Start date: 03-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324163 Version: 1 Revision date: 03-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 MAPEI CONSTRUCTION CHEMICALS L.L.C.
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 14001:2015
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material.
IAF:12

Certificate issued in accordance with the Technical Regulation ACCREDIA RT-09

Original cycle start date by another certification body: 29-May-2014

Expiry date of previous cycle: 06-July-2023
Certification / Recertification Audit date: 12-May-2023
Certification/Recertification Cycle Start date: 06-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324254 Version: 1 Revision date: 06-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 MAPEI CONSTRUCTION CHEMICALS L.L.C
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 45001:2018
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material
IAF: 12

Original cycle start date by another certification body: 22-March-2018

Expiry date of previous cycle: 06-July-2023

Certification / Recertification Audit date: 09-May-2023
Certification/Recertification Cycle Start date: 06-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324231 Version: 1 Revision date: 06-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 CERTIFICATO n.
CERTIFICATE No 250
SI CERTIFICA CHE L’ORGANIZZAZIONE
WE HEREBY CERTIFY THAT THE ORGANIZATION

MAPEI S.p.A.

IT - 20159 MILANO (MI) - VIA CAFIERO 22

NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIVE UNITS

VEDASI ALLEGATO / SEE ANNEX

HA ATTUATO E MANTIENE UN SISTEMA DI GESTIONE QUALITÀ CHE È CONFORME ALLA NORMA
HAS IMPLEMENTED AND MAINTAINS A QUALITY MANAGEMENT SYSTEM WHICH COMPLIES WITH THE FOLLOWING STANDARD

UNI EN ISO 9001:2015

PER LE SEGUENTI ATTIVITÀ / FOR THE FOLLOWING ACTIVITIES SETTORE
CODE IAF 12
Attività di ricerca e sviluppo di adesivi, malte e prodotti chimici per l'edilizia e l'industria e
validazione di materie prime e di prodotti finiti svolte mediante l'utilizzo di impianti di laboratorio
e di impianti pilota. Produzione, mediante miscelazione e sintesi, commercializzazione ed
assistenza tecnica, anche presso cantieri, di adesivi, malte e prodotti chimici per edilizia ed
industria. Progettazione e sviluppo, produzione mediante trasformazione di materie plastiche e
commercializzazione di fibre e monofilo per edilizia ed industria. Commercializzazione di
accessori per l’edilizia. Erogazione di servizi di supporto al business per le consociate del
Gruppo Mapei.

Research and development of adhesives, grouts and chemical products for building and
industrial applications and raw materials and finished products validation, through laboratory
equipment and pilot plants. Production, by mixing and synthesis, sales and technical service of
adhesives, grouts and chemicals for building and industrial applications. Design and
development, production by transformation of plastics and sales of fibers and monofilament for
building and industrial applications. Trading of accessories for building applications. Provision
of business support services for the Mapei Group subsidiaries.

IL PRESENTE CERTIFICATO È SOGGETTO AL RISPETTO DEL REGOLAMENTO PER LA CERTIFICAZIONE DEI SISTEMI DI GESTIONE
THE USE AND THE VALIDITY OF THE CERTIFICATE SHALL SATISFY THE REQUIREMENTS OF THE RULES FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

IL PRESENTE CERTIFICATO NON È DA RITENERSI VALIDO SE NON ACCOMPAGNATO DAL RELATIVO ALLEGATO
THIS CERTIFICATE IS NOT VALID WITHOUT THE RELEVANT ANNEX

PRIMA EMISSIONE
FIRST ISSUE
10/02/1995
DATA DELIBERA
DECISION DATE
25/11/2021
DATA SCADENZA
EXPIRY DATE
28/11/2024
EMISSIONE CORRENTE
ISSUE DATE
25/11/2021
CERTIQUALITY S.r.l. - IL PRESIDENTE
Via G. Giardino 4 - 20123 MILANO (MI) - ITALY
 CISQ/CERTIQUALITY S.r.l.
has issued an IQNet recognised certificate that the organization:

MAPEI S.p.A.
IT-20158 MILANO (MI) - VIA CAFIERO 22
for the following scope

Research and development of adhesives, grouts and chemical products for building and industrial applications and
raw materials and finished products validation, through laboratory equipment and pilot plants. Production, by
mixing and synthesis, sales andtechnical service of adhesives, grouts and chemicals for buil ding and industrial
applications. Design and development, production by transformation of plastics and sales of fibers and
monofilament for building and industrial applications. Trading of accessories for building applications. Provision of
business support services for the Mapei Group subsidiaries.

has implemented and maintains a

Quality Management System
which fulfills the requirements of the following standard
ISO 9001:2015
Issued on: 25/11/2021
First issued on: 10/02/1995
Expires on: 28/11/2024

This attestation is directly linked to the IQNet Partner's original certificate and shall not be used as a stand -alone document

Registration number: IT- 2180 Cisq Certificate: 250

 CERTIFICATO n.
CERTIFICATE No 27285
SI CERTIFICA CHE L’ORGANIZZAZIONE
WE HEREBY CERTIFY THAT THE ORGANIZATION

MAPEI S.p.A.

IT - 20159 MILANO (MI) - VIA CAFIERO 22

NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIVE UNITS

VEDASI ALLEGATO / SEE ANNEX

HA ATTUATO E MANTIENE UN SISTEMA DI GESTIONE SALUTE E SICUREZZA CHE È CONFORME ALLA NORMA
HAS IMPLEMENTED AND MAINTAINS A HEALTH AND SAFETY MANAGEMENT SYSTEM WHICH COMPLIES WITH THE FOLLOWING STANDARD

UNI ISO 45001:2018

IAF 12
SETTORE
PER LE SEGUENTI ATTIVITÀ / FOR THE FOLLOWING ACTIVITIES
CODE

Attività di ricerca e sviluppo di adesivi, malte e prodotti chimici per l'edilizia e l'industria e validazione di
materie prime e di prodotti finiti svolte mediante l'utilizzo di impianti di laboratorio e di impianti pilota.
Produzione, mediante miscelazione e sintesi, commercializzazione ed assistenza tecnica, anche presso
cantieri, di adesivi, malte e prodotti chimici per edilizia ed industria. Progettazione e sviluppo, produzione
mediante trasformazione di materie plastiche e commercializzazione di fibre e monofilo per edilizia ed
industria. Commercializzazione di accessori per l’edilizia. Erogazione di servizi di supporto al business
per le consociate del Gruppo Mapei.

Research and development of adhesives, grouts and chemical products for building and industrial
applications and raw materials and finished products validation, through laboratory equipment and pilot
plants. Production, by mixing and synthesis, sales and technical service of adhesives, grouts and
chemicals for building and industrial applications. Design and development, production by transformation
of plastics and sales of fibers and monofilament for building and industrial applications. Trading of
accessories for building applications. Provision of business support services for the Mapei Group
subsidiaries.

IL PRESENTE CERTIFICATO È SOGGETTO AL RISPETTO DEL REGOLAMENTO PER LA CERTIFICAZIONE DEI SISTEMI DI GESTIONE
THE USE AND THE VALIDITY OF THE CERTIFICATE SHALL SATISFY THE REQUIREMENTS OF THE RULES FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

IL PRESENTE CERTIFICATO NON È DA RITENERSI VALIDO SE NON ACCOMPAGNATO DAL RELATIVO ALLEGATO
THIS CERTIFICATE IS NOT VALID WITHOUT THE RELEVANT ANNEX

PRIMA EMISSIONE
FIRST ISSUE
04/12/2000
DATA DELIBERA
DECISION DATE
02/12/2021
DATA SCADENZA
EXPIRY DATE
06/12/2024
EMISSIONE CORRENTE
ISSUE DATE
02/12/2021
CERTIQUALITY S.r.l. - IL PRESIDENTE
Via G. Giardino 4 - 20123 MILANO (MI) - ITALY
 CISQ/CERTIQUALITY S.r.l.
has issued an IQNet recognised certificate that the organization:

MAPEI S.p.A.
IT-20158 MILANO (MI) - VIA CAFIERO 22
for the following scope

Research and developement of adesives, grouts and chemical products for building and industrial applications and
raw materials and finished products validation, through laboratory equipments and pilot plants. Production, by
mixing and synthesis, sales and technical service of adhesives, grouts and chemicals for building and industrial
applications. Trading of accessories for building applications. Provision of business support services for the Mapei
Group subsidiaries.

has implemented and maintains a

Safety Management System
which fulfills the requirements of the following standard
UNI ISO 45001:2018
Issued on: 02/12/2021
First issued on: 04/12/2000
Expires on: 06/12/2024

This attestation is directly linked to the IQNet Partner's original certificate and shall not be used as a stand -alone document

Registration number: IT- 118787 Cisq Certificate: 27285

 IN-COUNTRY VALUE
CERTIFICATE
Certificate ID: 126413-1
Issue Date: 27.09.2023
Valid Until: 01.10.2024

MAPEI CONSTRUCTION CHEMICALS L.L.C

40.44%
Company General Information
License No.: 604007
Company Type: International Company
Financial Year End Date: 31.12.2022
Company based in: Within UAE
Company Business: GOOD MANUFACTURER
For Cases of Re-Certification
Re-Certification (*) No.: 126413
Reason for this Re-Certification
Update of POA name

Signed By Verified as per ICV Agreed Upon Procedures (AUP)

On behalf of Supplier On behalf of Certification Body
Name: Name:
STEFANO IANNACONE Chandramouli Ganesan
Designation: Designation:
Managing Director Associate Partner
Company:
ERNST & YOUNG MIDDLE EAST
Certificate Issued Based on ICV Version: 3.0
 ‫رخصة صناعية‬
Industrial License
License Details / ‫تفاصيل الرخصة‬
License No. 604007 ‫رقم الرخصة‬

‫م‬.‫م‬.‫ذ‬.‫مابي لكيماويات البناء ش‬ ‫اسم الشركة‬

Company Name MAPEI CONSTRUCTION CHEMICALS L.L.C
‫م‬.‫م‬.‫ذ‬.‫مابي لكيماويات البناء ش‬ ‫السم التجارى‬
Trade Name MAPEI CONSTRUCTION CHEMICALS L.L.C

Legal Type Limited Liability Company - Single Owner(LLC - SO) (.‫م‬.‫م‬.‫ الشخص الواحد )ذ‬- ‫شركة ذات مسؤولية محدودة‬ ‫الشكل القانونى‬
Expiry Date 09/12/2024 ‫تاريخ النتهاء‬ Issue Date 10/12/2007 ‫تاريخ الصدار‬

D&B D-U-N-S ® 851038211 ‫الرقم العالمي‬ Main License No. 604007 ‫رقم الرخصة الم‬
No.
Register No. 1589534 ‫رقم السجل التجارى‬ DCCI No. 169129 ‫عضوية الغرفة‬

License Members / ‫الطراف‬

Share / ‫الحصص‬ Role / ‫الصفة‬ Nationality / ‫الجنسية‬ Name / ‫السم‬ No./‫رقم الشخص‬

1,000.00% Shares Owner / ‫مالك‬ Italy / ‫ايطاليا‬ ‫مابي اس بي ايه‬ 263312

‫حصص‬
MAPEI SPA
Manager / ‫مدير‬ Italy / ‫ايطاليا‬ ‫ستيفانو نزاريو لويجى اياناكون‬ 397479
STEFANO NAZARIO LUIGI
IANNACONE

License Activities / ‫نشاط الرخصة التجارية‬

Fire Resistant & Retardant Materials Manufacturing ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
Building & Construction Materials Trading ‫تجارة مواد البناء‬
Construction Chemicals Manufacturing ‫صناعة المواد الكيماوية لغراض البناء‬
Fire Resistant & Retardant Materials Trading ‫تجارة المواد المقاومة والمانعة لنتشار الحريق‬
Construction Chemicals Trading ‫تجارة المواد الكيماوية لغراض البناء‬
Address / ‫العنوان‬
Phone No 971-4-8156666 ‫تليفون‬ P.O. Box 73869 ‫صندوق بريد‬
Fax No 971-4-8156655 ‫فاكس‬ Parcel ID 597-191 ‫رقم القطعة‬
Mobile No 971-50-9966558 ‫هاتف متحرك‬ noor@fastlinkbms.com Email / ‫البريد اللكتروني‬

‫مجمع دبي للستثمار‬-‫بردبي‬-)‫مخزن ملك دبي انفستمنت بارك (ش ذ م م‬

Remarks / ‫الملحظات‬
2016-12-14 ‫تم اضافة وانسحاب شريك‬

Print Date 08/12/2023 11:47 ‫تاريخ الطباعة‬ Receipt No. 15388302 ‫رقم اليصال‬
‫اتصالت( للحصول‬/‫ )دو‬6969 ‫ أرسل رقم الرخصة إلى‬،‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‬
.‫على اذن الدفع‬ Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message (SMS). Send your trade year
license number to 6969 (Du/ Etisalat) to receive payment voucher. . ‫احصل على زوهو ون مجانا‬
‫للسنة الولى‬
Zoho.com/det

‫لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬. ‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي‬
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
 ‫شهادة شهر قيد شركة فى السجل التجارى‬
‫‪Commercial Register‬‬
‫تفاصيل القــيد ‪Register Details /‬‬
‫‪Main Lice. Nr‬‬ ‫‪604007‬‬ ‫‪ Register No.‬رقم الرخصة الم‬ ‫‪1589534‬‬ ‫رقم القيد‬

‫‪Company‬‬ ‫مابي لكيماويات البناء ش‪.‬ذ‪.‬م‪.‬م‬

‫‪Name‬‬ ‫‪MAPEI CONSTRUCTION CHEMICALS L.L.C‬‬
‫‪Legal Type‬‬ ‫شركة ذات مسؤولية محدودة ‪ -‬الشخص الواحد )ذ‪.‬م‪Limited Liability Company - Single Owner(LLC .‬‬ ‫الشكل القانونى‬
‫)‪- SO‬‬ ‫م‪(.‬‬
‫‪Expiry Date‬‬ ‫‪09/12/2024‬‬ ‫‪ Reg. Date‬تاريخ النتهاء‬ ‫‪16/12/2007‬‬ ‫تاريخ الصدار‬
‫‪D&B D-U-N-S‬‬ ‫®‬ ‫الرقم العالمي‬
‫‪No.‬‬ ‫‪851038211‬‬

‫تفاصيل راس المال ‪Capital Details /‬‬

‫‪Nominated‬‬ ‫‪43,000,000.00‬‬ ‫السمى‬
‫‪Paid‬‬ ‫‪43,000,000‬‬ ‫المدفوع‬
‫‪No. of Shares‬‬ ‫‪43,000‬‬ ‫عدد السهم‬
‫‪Currency‬‬ ‫‪UAE Dirhams‬‬ ‫درهم اماراتي‬ ‫العملة‬

‫عنوان الرخصة ‪License Address /‬‬

‫مخزن ملك دبي انفستمنت بارك (ش ذ م م)‪-‬بردبي‪-‬مجمع دبي للستثمار‬

‫عنوان السجل التجاري ‪Commerce Address /‬‬

‫مخزن ملك دبي انفستمنت بارك )ش ذ م م(‪-‬بردبي‪-‬مجمع دبي للستثمار‬

‫أنشطة السجل ‪Register Activities /‬‬
‫‪Construction Chemicals Manufacturing‬‬ ‫صناعة المواد الكيماوية لغراض البناء‬
‫‪Fire Resistant & Retardant Materials Manufacturing‬‬ ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
‫‪Building & Construction Materials Trading‬‬ ‫تجارة مواد البناء‬
‫‪Fire Resistant & Retardant Materials Trading‬‬ ‫تجارة المواد المقاومة والمانعة لنتشار الحريق‬
‫‪Construction Chemicals Trading‬‬ ‫تجارة المواد الكيماوية لغراض البناء‬

‫‪Print Date‬‬ ‫‪08/12/2023‬‬ ‫‪11:47‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪15388302‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪) 6969‬دو‪/‬اتصالت( للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message (SMS). Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 (Du/ Etisalat) to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا ‪.‬‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬

‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
 MAPEI CONSTRUCTION CHEMICALS L.L.C
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Investments Park 2 - . Dubai () - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 9001:2015
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material.
IAF: 12

Original cycle start date by another certification body: 24-February-2012

Expiry date of previous cycle: 06-July-2023

Certification / Recertification Audit date: 10-May-2023
Certification/Recertification Cycle Start date: 03-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324163 Version: 1 Revision date: 03-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 MAPEI CONSTRUCTION CHEMICALS L.L.C.
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 14001:2015
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material.
IAF:12

Certificate issued in accordance with the Technical Regulation ACCREDIA RT-09

Original cycle start date by another certification body: 29-May-2014

Expiry date of previous cycle: 06-July-2023
Certification / Recertification Audit date: 12-May-2023
Certification/Recertification Cycle Start date: 06-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324254 Version: 1 Revision date: 06-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 MAPEI CONSTRUCTION CHEMICALS L.L.C
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates
Certified site:
Plot no. 597-191, 62 Street, Dubai Inves tments Park 2 - - Dubai (UAE) - United Arab Emirates

Bureau Veritas Italia S.p.A. certifies that the Management System of the above organization has
been audited and found to be in accordance with the requirements of the management system
standards detailed below

ISO 45001:2018
Scope of certification

Product development, industrialization, production by mixing, storage, sales, and

technical services of adhesives, grouts, and chemicals for building, industrial, rail,
marine, and oil and gas applications and trading of building material
IAF: 12

Original cycle start date by another certification body: 22-March-2018

Expiry date of previous cycle: 06-July-2023

Certification / Recertification Audit date: 09-May-2023
Certification/Recertification Cycle Start date: 06-July-2023
Subject to the continued satisfactory operation of the organization’s
Management System, this certificate expires on: 06-July-2026

Certificate No. IT324231 Version: 1 Revision date: 06-July-2023

Certification Body Address:

Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milan, Italy

Further clarifications regarding the scope of this certificate and the applicability of the management system
requirements may be obtained by consulting the organization.

To check the validity of this certificate please double click or scan QR CODE

1/1
 CERTIFICATO n.
CERTIFICATE No 250
SI CERTIFICA CHE L’ORGANIZZAZIONE
WE HEREBY CERTIFY THAT THE ORGANIZATION

MAPEI S.p.A.

IT - 20159 MILANO (MI) - VIA CAFIERO 22

NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIVE UNITS

VEDASI ALLEGATO / SEE ANNEX

HA ATTUATO E MANTIENE UN SISTEMA DI GESTIONE QUALITÀ CHE È CONFORME ALLA NORMA
HAS IMPLEMENTED AND MAINTAINS A QUALITY MANAGEMENT SYSTEM WHICH COMPLIES WITH THE FOLLOWING STANDARD

UNI EN ISO 9001:2015

PER LE SEGUENTI ATTIVITÀ / FOR THE FOLLOWING ACTIVITIES SETTORE
CODE IAF 12
Attività di ricerca e sviluppo di adesivi, malte e prodotti chimici per l'edilizia e l'industria e
validazione di materie prime e di prodotti finiti svolte mediante l'utilizzo di impianti di laboratorio
e di impianti pilota. Produzione, mediante miscelazione e sintesi, commercializzazione ed
assistenza tecnica, anche presso cantieri, di adesivi, malte e prodotti chimici per edilizia ed
industria. Progettazione e sviluppo, produzione mediante trasformazione di materie plastiche e
commercializzazione di fibre e monofilo per edilizia ed industria. Commercializzazione di
accessori per l’edilizia. Erogazione di servizi di supporto al business per le consociate del
Gruppo Mapei.

Research and development of adhesives, grouts and chemical products for building and
industrial applications and raw materials and finished products validation, through laboratory
equipment and pilot plants. Production, by mixing and synthesis, sales and technical service of
adhesives, grouts and chemicals for building and industrial applications. Design and
development, production by transformation of plastics and sales of fibers and monofilament for
building and industrial applications. Trading of accessories for building applications. Provision
of business support services for the Mapei Group subsidiaries.

IL PRESENTE CERTIFICATO È SOGGETTO AL RISPETTO DEL REGOLAMENTO PER LA CERTIFICAZIONE DEI SISTEMI DI GESTIONE
THE USE AND THE VALIDITY OF THE CERTIFICATE SHALL SATISFY THE REQUIREMENTS OF THE RULES FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

IL PRESENTE CERTIFICATO NON È DA RITENERSI VALIDO SE NON ACCOMPAGNATO DAL RELATIVO ALLEGATO
THIS CERTIFICATE IS NOT VALID WITHOUT THE RELEVANT ANNEX

PRIMA EMISSIONE
FIRST ISSUE
10/02/1995
DATA DELIBERA
DECISION DATE
25/11/2021
DATA SCADENZA
EXPIRY DATE
28/11/2024
EMISSIONE CORRENTE
ISSUE DATE
25/11/2021
CERTIQUALITY S.r.l. - IL PRESIDENTE
Via G. Giardino 4 - 20123 MILANO (MI) - ITALY
 CISQ/CERTIQUALITY S.r.l.
has issued an IQNet recognised certificate that the organization:

MAPEI S.p.A.
IT-20158 MILANO (MI) - VIA CAFIERO 22
for the following scope

Research and development of adhesives, grouts and chemical products for building and industrial applications and
raw materials and finished products validation, through laboratory equipment and pilot plants. Production, by
mixing and synthesis, sales andtechnical service of adhesives, grouts and chemicals for buil ding and industrial
applications. Design and development, production by transformation of plastics and sales of fibers and
monofilament for building and industrial applications. Trading of accessories for building applications. Provision of
business support services for the Mapei Group subsidiaries.

has implemented and maintains a

Quality Management System
which fulfills the requirements of the following standard
ISO 9001:2015
Issued on: 25/11/2021
First issued on: 10/02/1995
Expires on: 28/11/2024

This attestation is directly linked to the IQNet Partner's original certificate and shall not be used as a stand -alone document

Registration number: IT- 2180 Cisq Certificate: 250

 CERTIFICATO n.
CERTIFICATE No 27285
SI CERTIFICA CHE L’ORGANIZZAZIONE
WE HEREBY CERTIFY THAT THE ORGANIZATION

MAPEI S.p.A.

IT - 20159 MILANO (MI) - VIA CAFIERO 22

NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIVE UNITS

VEDASI ALLEGATO / SEE ANNEX

HA ATTUATO E MANTIENE UN SISTEMA DI GESTIONE SALUTE E SICUREZZA CHE È CONFORME ALLA NORMA
HAS IMPLEMENTED AND MAINTAINS A HEALTH AND SAFETY MANAGEMENT SYSTEM WHICH COMPLIES WITH THE FOLLOWING STANDARD

UNI ISO 45001:2018

IAF 12
SETTORE
PER LE SEGUENTI ATTIVITÀ / FOR THE FOLLOWING ACTIVITIES
CODE

Attività di ricerca e sviluppo di adesivi, malte e prodotti chimici per l'edilizia e l'industria e validazione di
materie prime e di prodotti finiti svolte mediante l'utilizzo di impianti di laboratorio e di impianti pilota.
Produzione, mediante miscelazione e sintesi, commercializzazione ed assistenza tecnica, anche presso
cantieri, di adesivi, malte e prodotti chimici per edilizia ed industria. Progettazione e sviluppo, produzione
mediante trasformazione di materie plastiche e commercializzazione di fibre e monofilo per edilizia ed
industria. Commercializzazione di accessori per l’edilizia. Erogazione di servizi di supporto al business
per le consociate del Gruppo Mapei.

Research and development of adhesives, grouts and chemical products for building and industrial
applications and raw materials and finished products validation, through laboratory equipment and pilot
plants. Production, by mixing and synthesis, sales and technical service of adhesives, grouts and
chemicals for building and industrial applications. Design and development, production by transformation
of plastics and sales of fibers and monofilament for building and industrial applications. Trading of
accessories for building applications. Provision of business support services for the Mapei Group
subsidiaries.

IL PRESENTE CERTIFICATO È SOGGETTO AL RISPETTO DEL REGOLAMENTO PER LA CERTIFICAZIONE DEI SISTEMI DI GESTIONE
THE USE AND THE VALIDITY OF THE CERTIFICATE SHALL SATISFY THE REQUIREMENTS OF THE RULES FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

IL PRESENTE CERTIFICATO NON È DA RITENERSI VALIDO SE NON ACCOMPAGNATO DAL RELATIVO ALLEGATO
THIS CERTIFICATE IS NOT VALID WITHOUT THE RELEVANT ANNEX

PRIMA EMISSIONE
FIRST ISSUE
04/12/2000
DATA DELIBERA
DECISION DATE
02/12/2021
DATA SCADENZA
EXPIRY DATE
06/12/2024
EMISSIONE CORRENTE
ISSUE DATE
02/12/2021
CERTIQUALITY S.r.l. - IL PRESIDENTE
Via G. Giardino 4 - 20123 MILANO (MI) - ITALY
 CISQ/CERTIQUALITY S.r.l.
has issued an IQNet recognised certificate that the organization:

MAPEI S.p.A.
IT-20158 MILANO (MI) - VIA CAFIERO 22
for the following scope

Research and developement of adesives, grouts and chemical products for building and industrial applications and
raw materials and finished products validation, through laboratory equipments and pilot plants. Production, by
mixing and synthesis, sales and technical service of adhesives, grouts and chemicals for building and industrial
applications. Trading of accessories for building applications. Provision of business support services for the Mapei
Group subsidiaries.

has implemented and maintains a

Safety Management System
which fulfills the requirements of the following standard
UNI ISO 45001:2018
Issued on: 02/12/2021
First issued on: 04/12/2000
Expires on: 06/12/2024

This attestation is directly linked to the IQNet Partner's original certificate and shall not be used as a stand -alone document

Registration number: IT- 118787 Cisq Certificate: 27285

 IN-COUNTRY VALUE
CERTIFICATE
Certificate ID: 126413-1
Issue Date: 27.09.2023
Valid Until: 01.10.2024

MAPEI CONSTRUCTION CHEMICALS L.L.C

40.44%
Company General Information
License No.: 604007
Company Type: International Company
Financial Year End Date: 31.12.2022
Company based in: Within UAE
Company Business: GOOD MANUFACTURER
For Cases of Re-Certification
Re-Certification (*) No.: 126413
Reason for this Re-Certification
Update of POA name

Signed By Verified as per ICV Agreed Upon Procedures (AUP)

On behalf of Supplier On behalf of Certification Body
Name: Name:
STEFANO IANNACONE Chandramouli Ganesan
Designation: Designation:
Managing Director Associate Partner
Company:
ERNST & YOUNG MIDDLE EAST
Certificate Issued Based on ICV Version: 3.0
KERABOND T
Cementitious adhesive with no vertical slip for
ceramic tiles.

CLASSIFICATION IN COMPLIANCE WITH ISO 13007

Kerabond T is a normal (1) slip-resistant (T) cementitious (C) adhesive of class C1T.

WHERE TO USE
· Indoor and outdoor fixing of ceramic tiles and mosaics of all types on floors, walls and ceilings.
· For fixing porcelain tiles (for large format tiles, e.g. more than 600x300 mm on wall, consult your local MAPEI technical
advisor).
· Spot bonding of insulating materials such as expanded polystyrene, expanded polyurethane, rock and glass wool, wood-
cement boards and sound-deadening panels etc.

Some application examples

Paper-faced or mesh-backed mosaics and all types of ceramic tiles (quarry tiles, single-fired and clinker tiles, etc.), on:
· conventional renders or cement mortar walls;
· ordinary concrete slabs or reinforced floating slabs, provided they are sufficiently well aged and cured;
· gypsum boards and anhydrite screeds as long as they are first treated with an appropriate primer.

TECHNICAL CHARACTERISTICS
Kerabond T is a grey or white powder composed of cement, fine-grade, synthetic resins and special additives formulated
in the MAPEI Research and Development Laboratories.
Mixed with water, Kerabond T becomes an easily trowellable mortar with good bonding strength, low slump and high
grab so that it can be applied vertically without sagging, even holding heavy tiles. Tiles can be installed from the top
towards the bottom without using spacer pegs.
Kerabond T hardens without noticeable shrinkage to become extremely resistant, adhering perfectly to all the
conventional materials used in construction.
N.B.: Mixing Kerabond T with Isolastic in place of water improves the characteristics to meet the requirements of class
C2ES2 (highly deformable improved cementitious adhesive) according to ISO 13007 and EN 12004.

RECOMMENDATIONS
Use Kerabond T mixed with Isolastic in the following cases:
· on foamed concrete walls and light weight blockwork;
· over underfloor heating or cooling installations;
· with large-size tiles;
· for the installation of glass mosaics;
· for the installation of stone materials as long as they are classified as stable and moisture-proof
Do not use Kerabond T in the following cases:
· on wooden substrates;
· on gypsum board walls unless pre-treated with an appropriate primer and properly fixed to obtain a suitable bearing;
· on metal, rubber, PVC and linoleum surfaces;
· for laying tiles which require a nominal layer of adhesive more than 10 mm thick;
· where the surface must be set to light foot traffic rapidly;
· for the installation of non-absorbent tiles (quarry tiles, single-fired tiles, clinker tiles, etc.) on other non-absorbent wall
and floor substrates.

APPLICATION PROCEDURE
Preparation of the substrate
The substrate must be adequately cured, mechanically sound, free of loose particles, grease, oil, paint, wax and other
deleterious material or surface contamination and should be sufficiently dry.
Cementitious substrate must not be subject to shrinkage after tile installation. In mild weather, renders must have cured
at least 1 week for each centimeter of thickness and cementitious screeds must have cured at least 28 days, unless they
have been made with MAPEI special binders for screeds such as Mapecem, Mapecem Pronto, Topcem, Topcem Pronto.
Surfaces that could become too hot due to exposure to sunlight, consider shading or cooling down with clean water.
Gypsum substrate and anhydrite screeds must be perfectly dry (maximum residual moisture 0.5%), sufficiently hard and
free of dust. It is absolutely essential that they are treated with Primer G or Eco Prim T.

Preparation of the mix

Kerabond T must be mixed with clean water to obtain a homogenous paste free of lumps; leave to rest for approximately
5 minutes and re-mix, the paste is then ready to use. The quantity of water to be used is 25-27 per 100 parts (by weight)
equal to 6.25-6.75 L of water for 25 kg of Kerabond T grey and 27-29 per 100 parts (by weight) equal to 6.75-7.25 L of water
for 25 kg of Kerabond T white.
The mix, produced in this way, is workable for at least 8 hours (at +23ºC).
Always refer to the quantity of mixing water prescribed on the packaging.

Application the mix

Kerabond T is applied with a notched trowel onto the substrate. Choose a trowel that will give coverage to the back of the
tiles of at least 65-70% for walls or for indoor light foot traffic. For heavy traffic, total immersion and outdoor application,
the coverage must be 100%. To obtain good adhesion to the substrate the following system is recommended: first, apply a
thin coat of Kerabond T using the smooth side of the trowel and immediately after apply the desired thickness of
Kerabond T using the toothed side of the trowel. In particular:
· for mosaics up to 5x5 cm, the MAPEI No. 4 square-notched trowel is recommended;
· for normal ceramic wall tiles, the MAPEI No. 5 V-notched trowel (consumption 2.5-3 kg/m²) is recommended;
· for floors, very irregular surfaces and tiles with high ribs or lugs, the MAPEI No. 6 V-notched trowel (consumption approx.
4 kg/m²) is recommended;
· in the case of outdoor ceramic floor and wall coverings subject to freezing, or in the case of other special uses such as
swimming pools, reservoirs, tile sizes larger than 900 cm², floors to be polished after installation or subject to heavy
loads, Kerabond T should be applied evenly to the back of the tile (back-buttering).

Installing the tiles

It is not necessary to wet the tiles before installation; only in the case of very dusty back washing is recommended, by
quickly immersing them in clean water. The tiles must be installed in the normal way, placing them firmly to ensure good
contact with the adhesive. The open time of Kerabond T in normal conditions of temperature and humidity, is 20-30
minutes; unfavorable environmental conditions (strong sunlight, drying wind, high temperature as well as a highly
absorbent substrate), could drastically reduce this time to a few minutes.
Therefore one must constantly check that the adhesive has not formed a superficial skin and is still “fresh”; where there is
a formation of superficial skin, the adhesive must be reworked with the notched trowel. Wetting the adhesive after it has
produced the skin is not recommended because the water forms an anti-adhesive film instead of dissolving it. The
“adjustability” of the tiles must be carried out within 45 minutes (at +23ºC) after installation.
Tiles installed with Kerabond T must not be subject to running water or rain for at least 24 hours and must be protected
from frost and strong sunlight for at least 5-7 days after installation.

Spot bonding insulating materials

Spot bonding of sound-deadening or insulating panels should be applied using a float or trowel. The required number and
thickness are determined by the flatness of the surface and the weight of the panels.
In these cases too, the open time must be observed, bearing in mind that a few spots of adhesive on heavy panels may
require temporary shoring which should then only be removed after the Kerabond T has begun to set.

Cleaning
Tools and containers should be cleaned with plenty of water while Kerabond T is still fresh. Surfaces should be cleaned
with a damp cloth, before the adhesive dries.

GROUTING AND SEALING

Wall joints between the ceramic tiles can be grouted after 4-8 hours and floor joints can be grouted after 24 hours with
the specific MAPEI cementitious or epoxy grouts, available in different colours.
Expansion joints must be sealed with the specific MAPEI sealants.
Grout with the appropriate MAPEI grout (see Technical Data Sheet of grouts for details).
 Fixing ceramic tiles on walls Fixing ceramic tiles on walls

SET TO LIGHT FOOT TRAFFIC

Floors are set to withstand light foot traffic after approximately 24 hours.

READY FOR USE

Floors are ready for use after approximately 14 days.

CONSUMPTION
Ceramic tiling:
- Mosaics and small size tiles (trowel No. 4; size 4x4 mm): 2 kg/m²
- Normal size tiles (trowel No. 5; size 5x5 mm): 2.5-3 kg/m²
- Large sizes, floors, exteriors (trowel No. 6; size 6x6 mm): 4 kg/m² and over
Spot-bonding insulating materials:
- Foam materials, etc.: approx. 0.5-0.8 kg/m²
- Gypsum wallboard, foamed concrete: approx. 1.5 kg/m²

PACKAGING
Kerabond T is supplied in white and grey in: 25 kg bags.

STORAGE
When stored in dry conditions in the original, unopened bags, Kerabond T has a shelf life of 12 months. If stored at high
temperature and or high humidity conditions the shelf life may be reduced.

SAFETY INSTRUCTION FOR PREPARATION AND INSTALLATION

Kerabond T is an irritant containing cement that when in contact with sweat or other body fluids causes irritant alkaline
reactions and allergic reactions to those predisposed. It is recommended to use protective gloves and goggles and to
take the usual precautions for handling chemicals.
If the product comes in contact with the eyes or skin, wash immediately with plenty of water and seek medical attention.
For further and complete information about the safe use of our product please refer to the latest version of our Material
Safety Data Sheet.

TECHNICAL DATA (typical values)

In compliance with:
– European EN 12004 as C1T
– ISO 13007-1 as C1T
– European EN 12004 as C2ES2 (if mixed with Isolastic 100%)
– ISO 13007-1 as C2ES2 (if mixed with Isolastic 100%)
– American ANSI A 118.1, A 118.4
PRODUCT IDENTIFICATION

Type: powder
 Colour: white or grey

Bulk density (kg/cm³): 1300

Dry solids content (%): 100

EMICODE: EC1 Plus - very low emission

APPLICATION DATA at +23°C - 50% R.H.

100 parts Kerabond T with 25-27 parts water by weight
Mixing ratio: for Kerabond T grey and 27-29 parts water by weight
for Kerabond T white
Consistency of mix: very pasty

Density of mix (kg/m³): 1450

pH of mix: 13

Application temperature: from +5°C to +40°C

Pot life: over 8 hours

Open time (according to EN 1346): > 20 minutes

Adjustability time: approx. 45 minutes

Wall grouting: after 4-8 hours

Floor grouting: after 24 hours

Set to light foot tra­ffic 24 hours

Ready for use: 14 days

FINAL PERFORMANCE
Adhesion strength according to EN 1348 (N/mm2)
- initial adhesion strength (after 28 days): 1.4
- adhesion strength after heat: 0.8
- adhesion strength after water immersion: 0.9
- adhesion strength after freeze-thaw cycles: 1.2
Resistance to alkalis: excellent

Resistance to oils: excellent (poor to vegetable oil)

Resistance to solvents: excellent

Temperature resistance after final cure: from -30°C to +90°C

VOC: 0 g/l
N.B. The technical data of Kerabond T mixed with Isolastic are on the latter’s technical data sheet.
 Mrázovka Tunnel - Prague - Czech Hotel Radison - Bükkfürdő - Hungary Alliance insurance offices - Munich -
Republic Germany

Kingcross Shopping Centre - Zagabria

- Croatia

IMPORTANT NOTES
Whilst we try to ensure that any advice, recommendations or information given in our literature is accurate and correct,
we have no control over the circumstances in which our product is used. It is therefore important that installers satisfy
themselves that the product and conditions are suitable for the envisaged application. No warranty can be given or
responsibility accepted other than, that the product supplied by us will meet our written specification. The installer
should ensure that our latest product data and safety information sheets have been consulted prior to use.

Please refer to the current version of the Technical Data Sheet, available from our website www.mapei.com

LEGAL NOTICE
The contents of this Technical Data Sheet (“TDS”) may be copied into other project-related documents, but the resulting
document shall not supplement or replace requirements per the TDS in force at the time of the MAPEI product
installation. The most up-to-date TDS can be downloaded from our website www.mapei.com.

ANY ALTERATIONS TO THE WORDING OR REQUIREMENTS CONTAINED OR DERIVED FROM THIS TDS EXCLUDES THE
RESPONSIBILITY OF MAPEI.

All relevant references for the product are available upon request and from www.mapei.com

78-7-2018 (UAE)

. Any reproduction of texts, photos and illustrations published here is prohibited and subject to .
prosecution
 Licence Number: 13909/01.10.05
For the product KERABOND T
Of company Mapei
Due to application date 27.08.2021

With reference to the classification in accordance with the directives as

stipulated in § 10 of the GEV trademark constitution
on behalf of the GEV for the above mentioned product as per § 5, section 4 of the
GEV trademark constitution is awarded the licence for the use of the GEV
trademark

This product meets with the guidelines for the criteria of use listed reverse.
The company is ordinary member of the GEV.

OM035 06.09.2021
valid until 06.09.2026
 Requirement guidelines for the awarding of the EMICODE licence
The product mentioned on the front side of the licence has to fulfil among others the following criteria in
accordance with the Constitution and the guidelines of the Technical Advisory Board of the GEV:
• The product meets all the legal requirements, especially the chemical laws and their specifications.
• The product is solvent free as specified in clause 2.4 of the “GEV Classification Criteria”, except if it
is a surface treatment product. If the product is assigned to a GISCODE product group then this can
be labelled.
• A safety data sheet (SDS) according to local law in its respectively valid version is issued for the
product.
• Carcinogenic, mutagenic, reprotoxic substances of the categories 1A or 1B are not added during the
manufacture of the product.
• The testing of the product is performed in accordance with the GEV Testing Method. VOC
determination is performed in a test chamber followed by the Tenax / thermal desorption procedures
with subsequent GC/MS analysis.
• The assignment of an EMICODE class is performed according to the following criteria and
TVOC/TSVOC concentration levels. The corresponding EMICODE class shall be used to label the
product:
1) Installation products, adhesives and construction products

EC 1PLUS EC 1 EC 2
Parameter
max. allowed concentration [µg/m³]
TVOC after 3 days < 750 < 1000 < 3000
TVOC after 28 days < 60 < 100 < 300
TSVOC after 28 days < 40 < 50 < 100
R value based on German AgBB LCI
1 - -
(NIK) after 28 days
Sum of non-assessable VOC < 40 - -
Formaldehyde after 3 days < 50 < 50 < 50
Acetaldehyde after 3 days < 50 < 50 < 50
Sum of form- and acetaldehyde < 0.05 ppm < 0.05 ppm < 0.05 ppm
Sum of volatile C1A/C1B after
< 10 < 10 < 10
3 days
Any volatile C1A/C1B after
<1 <1 <1
28 days
2) Products for floor surface treatments for parquet, mineral floors and resilient floorings

EC 1PLUS EC 1 EC 2
Parameter
max. allowed concentration [µg/m³]
≤ 100 < 150 < 450
Sum TVOC + TSVOC after 28 days thereof max. thereof max. thereof max.
40 SVOC 50 SVOC 100 SVOC
Formaldehyde after 3 days < 50 < 50 < 50
Acetaldehyde after 3 days < 50 < 50 < 50
Any volatile C1A/C1B after
< 10 < 10 < 10
3 days
Any volatile C1A/C1B after
<1 <1 <1
28 days

Edition: 04.10.2017
 DATE: 18 September 2019

KERABOND T – LEED PRODUCT INFORMATION

Description: Cementitious adhesive with no vertical slip for ceramic tiles

MAPEI Construction Chemicals LLC

Manufacturing
P.O. Box 73869
Location:
Dubai, United Arab Emirates

Above product has been tested as per SCAQMD 1168 (Ceramic Tile Adhesive)
Test method:
Allowable Limit: 65 g/l

VOC Content: 0 g/l

Mapei certifies that the VOC of Kerabond T conforms to the

Remarks:
LEED EQ Credit 4.1: Low Emitting Material: Adhesives and Sealants

Approved by

Albert J Thykadavil
Technical Services Manager
 METHOD STATEMENT
KERABOND T

KERABOND T
Cementitious adhesive with no vertical slip for ceramic tiles

1.0 Surface Preparation

1.1 Surfaces to be tiled shall be sound, clean, and free from dust or other contaminants such as cement laitance,
form release agent, curing compound, paint or any other deleterious material that could impair adhesion.
1.2 Highly absorbent substrates such as gypsum or cement boards must be pre-treated with PRIMER G, diluted
with water at a ratio of 1:1 or 1:2.

2.0 Mixing

2.1 Pre measure 6.0 – 6.5 liters of clean cool water per 25kg of KERABOND T grey, or 6.5 – 7.0 litres per 25kg of
KERABOND T white, and pour into a suitably sized clean rust-free container.
2.2 Slowly add the entire powder component to the water while mixing and continue for 4 minutes, ensuring to
scrape the sides of the container, in order to obtain a homogenous, creamy and lump-free paste.
2.3 KERABOND T shall be mixed using a heavy duty slow speed drill (300 – 500 RPM) fitted with a suitable mortar
mixing paddle.
2.4 Leave the mixed material for 5 minutes after which, re-mix for a further one minute, following which the
adhesive is then ready for use.
2.5 Part mixing is not recommended.

3.0 Application

3.1 Select an appropriate notched trowel, based on the size of the tile to be installed. Trowels as recommended
by Mapei.
3.2 Using the smooth side of the notched trowel, apply a layer of adhesive on the substrate and work the
adhesive vigorously into the substrate.
3.3 Using the notched side of the trowel, immediately apply another layer of adhesive onto the substrate.
3.4 Using the straight edge of the trowel apply a thin layer of adhesive onto the back of the tile using the “Back-
buttering” technique.
3.5 Place the tile onto the fresh layer of adhesive with a twisting motion while the mortar is still wet and
workable and fully embed using a rubber mallet, gently tapping the tile into place.
3.6 Periodically, check to ensure that full adhesive coverage has been achieved by carefully and immediately
removing a single tile and visibly checking that the back of the tile is completely covered in adhesive. If full
coverage has been achieved re-fix the tile carefully as above.
3.7 If any voids are noticed using the checking technique outlined in 3.6, apply further adhesive to the localized
areas in order to achieve full coverage and replace the tiles as noted above.
3.8 Remove any excess material protruding into the tile joints, in order to ensure the proper depth of the
subsequent grouting of the joint.
3.9 The tiled area should be completely protected from pedestrian traffic or any other disturbances for a period
of 24 hours.

Method Statement KERABOND T - Page 1 of 2

UAE-MS-62-13-11-19-2
 METHOD STATEMENT
KERABOND T

4.0 Grouting

4.1 Use a suitable Mapei grout as recommended by your local Mapei Technical Representative. Wall joints
between the tiles can be grouted after 4-8 hours. Floor joints can be grouted after 24 hours.

5.0 Storage/Precautions

Where temperatures are greater than 35°C, it is suggested to adopt one or more of the following precautions, in
order to improve the workability and open time of the product:

5.1 Keep stored material and mixing equipment out of direct sunlight.
5.2 Store the adhesives in a temperature controlled environment (maximum 25°C) for a period of at least
48 hours prior to use.
5.3 Avoid application during the hottest time of the day and/or direct sunlight.
5.4 Use cool water (20°C to 24°C) or mixing the adhesive, in order to prolong the pot life of the mixed material.
5.5 Mix only sufficient material that can be applied using available labour and equipment.

Required Equipment

 Slow speed mixing drill (300-500 RPM) fitted with a suitable mortar mixing paddle
 Flat trowel / Scraper / Spatula or filing knife
 Notched trowel, with a notched profile suitable for the installation
 Roller/Brush for primer
 Ample amount of clean water for cleaning tiles & tools
 Clean, rust-free empty buckets
 Rubber mallet

Approval and Variations

This method statement is offered as a ‘Standard Guideline’ for the application of KERABOND T. It remains the responsibility of the Engineer to
determine the correct method for any given application. Mapei will not accept responsibility or liability for variations to the above method
statement under any other condition.

Method Statement KERABOND T - Page 2 of 2

UAE-MS-62-13-11-19-2
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 50% ISOLASTIC Dated: 16/09/22

MAPECEM
Special fast setting and drying (24 hours) hydraulic binder for shrinkage compensated screeds

MAPECEM PRONTO
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds

TOPCEM
Special prebagged, polymer-modified hydraulic binder for normal setting, fast drying (4 days) and controlled shrinkage
screeds

TOPCEM PRONTO
Ready-to-use, normal setting, quick-drying mortar with high thermal conductivity

PRIMER G
Synthetic-resin-based water-dispersion primer with very low volatile organic compound (VOC)

ECO PRIM T
Acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

PRIMER S
Waterproofing primer in water dispersion

KERABOND T
Cementitious adhesive with no vertical slip for ceramic tiles

ISOLASTIC
Latex additive to impart elasticity to cement-based adhesive

1.0 Preparation of the substrate

1.1 All substrates receiving KERABOND T + ISOLASTIC must be flat, mechanically strong, and free from loose parts,
grease, oil, paint, wax, etc.
1.2 Precast concrete elements or in situ concrete must be fully cured in favorable weather conditions.
1.3 Cementitious substrates must not be subject to shrinkage once the tiles have been installed, renders should be
fully cured with optimum moisture content.
1.4 Cementitious screeds must have an overall cure of at least 28 days unless they have been made with the special
MAPEI binders for screeds such as MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO.
1.5 Surfaces that are too hot due to exposure to direct sunlight should be cooled by dampening them with water.
1.6 Gypsum substrates and anhydrite screeds must be perfectly dry (maximum residual moisture 0.5%), sufficiently
hard, and free from dust.
1.7 In common with good tiling practices, such surfaces must be sealed with PRIMER G or ECO PRIM T to ensure
uniformity of surface absorbency. Areas subject to extreme dampness must be primed with PRIMER S.

2.0 Mixing ratio

2.1 The mixing ratio is determined by the degree of deformability required of the adhesive: use ISOLASTIC as a
complete substitute for mixing water when a highly deformable adhesive (Class S2 according to EN 12004 or ISO
13007) is required, e.g. for substrates subject to significant movement such as concrete structures with less than
Method Statement KERABOND T + 50% ISOLASTIC - Page 1 of 3
UAE-MS-124-13-11-19-3
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 50% ISOLASTIC Dated: 16/09/22

6 months old, for large size tiles or slabs (over 900 cm²) or for those subject to considerable sudden temperature
changes.
2.2 ISOLASTIC may be used at 50% concentration (mixed 1:1 with water) when a deformable cementitious adhesive
(Class S1 according to EN 12004 or ISO 13007) is required, e.g. on moderately unstable substrates, on sufficiently
cured concrete structures, for small formats (mosaics, tozzetti, etc.).
2.3 Premeasure 3.125 kg of clean cool water with 3.125 kg of 50% ISOLASTIC (diluted 1: 1 with water) per 25kg of
KERABOND T and pour into a suitably sized clean rust-free container. This is based on the declared water
minimum requirement for KERABOND T Grey and can be adjusted to maintain the 1:1 dilution when using the
allowed range of the declared water requirement both for Grey and White versions of the adhesive.
2.4 Slowly add the entire powder component to the liquid while mixing and continue for 4 minutes, ensuring to
scrape the sides of the container, in order to obtain a homogenous, creamy and lump-free paste.

3.0 Preparation of the mix

3.1 Pour the powder into the liquid and continuously stir the mix with a slow-speed mechanical stirrer until it
becomes a smooth paste, lump-free paste.
3.2 Allow the mix to settle for a few minutes and, after further stirring, proceed with the application.

4.0 Application of the mix

4.1 Apply the mix to the substrate with a medium-sized notched trowel. Choose a trowel that transfers the adhesive
to at least 65-70% to the back of tiles for walls and floors in light foot traffic situations and in interiors, and 100%
coverage to the back of tiles used in heavy traffic areas and outdoors.
4.2 To obtain good adhesion, first, apply a thin coat of the mix onto the substrate using the flat side of the trowel,
then immediately after applying the desired thickness of the mix using the appropriate notched trowel according
to the type and size of the tiles.
4.3 To enhance adhesion e.g. for heavy-duty traffic areas, and larger format tiles, the back buttering technique
should be utilized.

5.0 Installing the tiles

Note: Follow the same recommendations as outlined in the Technical Data Sheet for the adhesive which ISOLASTIC is
to be mixed with. However, greater attention should be paid to the open time which, in the equivalent relative
temperature and humidity conditions, will be slightly shorter than the open time of the basic product.

5.1 It is not necessary to wet the tiles before installation; only in the case of very dusty back washing is
recommended, by quickly immersing them in clean water.
5.2 The tiles must be installed in the normal way, placing them firmly to ensure good contact with the adhesive.
5.3 The open time of KERABOND T in normal conditions of temperature and humidity, is 20-30 minutes; unfavorable
environmental conditions (strong sunlight, drying wind, high temperature as well as a highly absorbent
substrate), could drastically reduce this time to a few minutes. Therefore, one must constantly check that the
adhesive has not formed a superficial skin and is still “fresh”; where there is a formation of superficial skin, the
adhesive must be reworked with the notched trowel.
5.4 Wetting the adhesive after it has produced the skin is not recommended because the water forms an anti-
adhesive film instead of dissolving it.

Method Statement KERABOND T + 50% ISOLASTIC - Page 2 of 3

UAE-MS-124-13-11-19-3
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 50% ISOLASTIC Dated: 16/09/22

5.5 The “adjustability” of the tiles must be carried out within 45 minutes (at +23ºC) after installation.
5.6 Tiles installed with KERABOND T must not be subject to running water or rain for at least 24 hours and must be
protected from frost and strong sunlight for at least 5-7 days after installation.

6.0 Grouting and sealing

6.1 Wall joints between the ceramic tiles can be grouted after 4-8 hours and floor joints can be grouted after 24
hours with the specific MAPEI cementitious or epoxy grouts, available in different colours.
6.2 Expansion joints must be sealed with the specific MAPEI sealants.
6.3 Grout with the appropriate MAPEI grout (see Technical Data Sheet of grouts for details).

7.0 Storage / Precautions

Where temperatures are greater than 35°C, it is suggested to adopt one or more of the following precautions, in order
to improve the workability and open time of the product:

7.1 Keep stored material and mixing equipment out of direct sunlight.
7.2 Store the adhesives and liquids in a temperature-controlled environment (maximum 25°C) for a period of at least
48 hours prior to use.
7.3 Avoid application during the hottest time of the day and/or direct sunlight.

Required Equipment

• Slow speed mixing drill (300-500 RPM) fitted with a suitable mortar mixing paddle
• Flat trowel / Scraper / Spatula or filing knife
• Notched trowel, with a notched profile suitable for the installation
• Roller/Brush for primer
• Ample amount of clean water for cleaning tiles & tools
• Clean, rust-free empty buckets
• Rubber mallet

Approval and Variations

This method statement is offered as a ‘Standard Guideline’ for the application of KERABOND T + 50% ISOLASTIC. It remains the responsibility of
the Engineer to determine the correct method for any given application. Mapei will not accept responsibility or liability for variations to the
above method statement under any other condition.

Method Statement KERABOND T + 50% ISOLASTIC - Page 3 of 3

UAE-MS-124-13-11-19-3
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 100% ISOLASTIC Dated: 16/09/22

MAPECEM
Special fast setting and drying (24 hours) hydraulic binder for shrinkage compensated screeds

MAPECEM PRONTO
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds

TOPCEM
Special prebagged, polymer-modified hydraulic binder for normal setting, fast drying (4 days) and controlled shrinkage
screeds

TOPCEM PRONTO
Ready-to-use, normal setting, quick-drying mortar with high thermal conductivity

PRIMER G
Synthetic-resin-based water-dispersion primer with very low volatile organic compound (VOC)

ECO PRIM T
Acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC)

PRIMER S
Waterproofing primer in water dispersion

KERABOND T
Cementitious adhesive with no vertical slip for ceramic tiles

ISOLASTIC
Latex additive to impart elasticity to cement-based adhesive

1.0 Preparation of the substrate

1.1 All substrates receiving KERABOND T + ISOLASTIC must be flat, mechanically strong, and free from loose parts,
grease, oil, paint, wax, etc.
1.2 Precast concrete elements or in situ concrete must be fully cured in favorable weather conditions.
1.3 Cementitious substrates must not be subject to shrinkage once the tiles have been installed, renders should be
fully cured with optimum moisture content.
1.4 Cementitious screeds must have an overall cure of at least 28 days unless they have been made with the special
MAPEI binders for screeds such as MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO.
1.5 Surfaces that are too hot due to exposure to direct sunlight should be cooled by dampening them with water.
1.6 Gypsum substrates and anhydrite screeds must be perfectly dry (maximum residual moisture 0.5%), sufficiently
hard, and free from dust.
1.7 In common with good tiling practices, such surfaces must be sealed with PRIMER G or ECO PRIM T to ensure
uniformity of surface absorbency. Areas subject to extreme dampness must be primed with PRIMER S.

2.0 Mixing ratio

2.1 The mixing ratio is determined by the degree of deformability required of the adhesive: use ISOLASTIC as a
complete substitute for mixing water when a highly deformable adhesive (class S2 according to EN 12004 or ISO
13007) is required, e.g. for substrates subject to significant movement such as concrete structures with less than
Method Statement KERABOND T + 100% ISOLASTIC - Page 1 of 3
UAE-MS-58-13-11-19-3
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 100% ISOLASTIC Dated: 16/09/22

6 months old, for large size tiles or slabs (over 900 cm²) or for those subject to considerable sudden temperature
changes.
2.2 KERABOND T + ISOLASTIC at 100%: mix a 25 kg bag of KERABOND T with about 8 - 8.5 kg of ISOLASTIC.
2.3 Premeasure 8-8.5Kg of ISOLASTIC per 25Kg of KERABOND T and pour into a suitably sized clean rust-free
container. Slowly add the entire powder component to the liquid while mixing and continue for 4 minutes,
ensuring to scrape the sides of the container, in order to obtain a homogenous, creamy and lump-free paste.

3.0 Preparation of the mix

3.1 Pour the powder into the liquid and continuously stir the mix with a slow-speed mechanical stirrer until it
becomes a smooth paste, lump-free paste.
3.2 Allow the mix to settle for a few minutes and, after further stirring, proceed with the application.

4.0 Application of the mix

4.1 Apply the mix to the substrate with a medium-sized notched trowel. Choose a trowel that transfers the adhesive
to at least 65-70% to the back of tiles for walls and floors in light foot traffic situations and in interiors, and 100%
coverage to the back of tiles used in heavy traffic areas and outdoors.
4.2 To obtain good adhesion, first, apply a thin coat of the mix onto the substrate using the flat side of the trowel,
then immediately after applying the desired thickness of the mix using the appropriate notched trowel according
to the type and size of the tiles.
4.3 To enhance adhesion e.g. for heavy-duty traffic areas, and larger format tiles, the back buttering technique
should be utilized.

5.0 Installing the tiles

Note: Follow the same recommendations as outlined in the Technical Data Sheet for the adhesive which ISOLASTIC is
to be mixed with. However, greater attention should be paid to the open time which, in the equivalent relative
temperature and humidity conditions, will be slightly shorter than the open time of the basic product.

5.1 It is not necessary to wet the tiles before installation; only in the case of very dusty back washing is
recommended, by quickly immersing them in clean water.
5.2 The tiles must be installed in the normal way, placing them firmly to ensure good contact with the adhesive.
5.3 The open time of KERABOND T in normal conditions of temperature and humidity, is 20-30 minutes; unfavorable
environmental conditions (strong sunlight, drying wind, high temperature as well as a highly absorbent
substrate), could drastically reduce this time to a few minutes. Therefore, one must constantly check that the
adhesive has not formed a superficial skin and is still “fresh”; where there is a formation of superficial skin, the
adhesive must be reworked with the notched trowel.
5.4 Wetting the adhesive after it has produced the skin is not recommended because the water forms an anti-
adhesive film instead of dissolving it.
5.5 The “adjustability” of the tiles must be carried out within 45 minutes (at +23ºC) after installation.
5.6 Tiles installed with KERABOND T must not be subject to running water or rain for at least 24 hours and must be
protected from frost and strong sunlight for at least 5-7 days after installation.

Method Statement KERABOND T + 100% ISOLASTIC - Page 2 of 3

UAE-MS-58-13-11-19-3
 Doc No: P TS02 EA A22
METHOD STATEMENT
Rev: 00
KERABOND T + 100% ISOLASTIC Dated: 16/09/22

6.0 Grouting and sealing

6.1 Wall joints between the ceramic tiles can be grouted after 4-8 hours and floor joints can be grouted after 24
hours with the specific MAPEI cementitious or epoxy grouts, available in different colours.
6.2 Expansion joints must be sealed with the specific MAPEI sealants.
6.3 Grout with the appropriate MAPEI grout (see Technical Data Sheet of grouts for details).

7.0 Storage / Precautions

Where temperatures are greater than 35°C, it is suggested to adopt one or more of the following precautions, in order
to improve the workability and open time of the product:

7.1 Keep stored material and mixing equipment out of direct sunlight.
7.2 Store the adhesives and liquids in a temperature-controlled environment (maximum 25°C) for a period of at least
48 hours prior to use.
7.3 Avoid application during the hottest time of the day and/or direct sunlight.

Required Equipment

• Slow speed mixing drill (300-500 RPM) fitted with a suitable mortar mixing paddle
• Flat trowel / Scraper / Spatula or filing knife
• Notched trowel, with a notched profile suitable for the installation
• Roller/Brush for primer
• Ample amount of clean water for cleaning tiles & tools
• Clean, rust-free empty buckets
• Rubber mallet

Approval and Variations

This method statement is offered as a ‘Standard Guideline’ for the application of KERABOND T + ISOLASTIC. It remains the responsibility of the
Engineer to determine the correct method for any given application. Mapei will not accept responsibility or liability for variations to the above
method statement under any other condition.

Method Statement KERABOND T + 100% ISOLASTIC - Page 3 of 3

UAE-MS-58-13-11-19-3
Safety Data Sheet
KERABOND T GREY
Safety Data Sheet dated: 17/02/2021 - version 1
Date of first edition: 17/02/2021

1: Identification
GHS Product Identifier
Mixture identification:
Trade name: KERABOND T GREY
Trade code: 900022
Recommended use of the chemical and restrictions on use
Recommended use: Cement based powder adhesive
Uses advised against: Not available
Supplier's details
Company: MAPEI CONSTRUCTION CHEMICALS L.L.C
P.O. BOX 73869 DUBAI - United Arab Emirates
Responsible: info@mapei.ae
Emergency phone number
Office: 00971 4 8156666
Office: 00971 4 8156666
Factory : 00971 4 8858428

2: Hazard identification
Classification of the substance or mixture

Skin Irrit. 2 Causes skin irritation.

Eye Dam. 1 Causes serious eye damage.
Skin Sens. 1B May cause an allergic skin reaction.
STOT SE 3 May cause respiratory irritation.
Adverse physicochemical, human health and environmental effects:
No other hazards
GHS label elements, including precautionary statements
Pictograms and Signal Words

Danger

Hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary statements:
P261 Avoid breathing dust.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.

P312 Call a POISON CENTER if you feel unwell.

P321 Specific treatment (see supplementary instructions on this label)
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards which do not result in a classification
Print date 29/03/2022 Production Name KERABOND T GREY Page n. 1 of 6
Other hazards which do not result in a classification
No other hazards
Prolonged exposition and/or intensive inhalation of respirable free crystalline silica (average diameter less than 10 micron in
accordance with ACGIH) can cause pulmonary fibrosis commonly referred to as silicosis.
This preparation contains cement. Contact between cement and body fluids (e.g. sweat and eye fluids) may cause irritation or
burns.

3: Composition/information on ingredients
Substances
Not available
Mixtures

Hazardous components within the meaning of GHS and related classification:

Concentration Name Ident. Numb. Classification Registration Number
(% w/w)
≥25 - <50 % portland cement, Cr(VI) < 2 ppm CAS:65997-15-1 Skin Irrit. 2, H315; Skin Sens. 1B,
EC:266-043-4 H317; Eye Dam. 1, H318; STOT
SE 3, H335

4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
OBTAIN IMMEDIATE MEDICAL ATTENTION.
Remove contaminated clothing immediately and dispose of safely.
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
In case of inhalation, consult a doctor immediately and show him packing or label.
Most important symptoms/effects, acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema
Indication of immediate medical attention and special treatment needed, if necessary
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment:
(see paragraph 4.1)

5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: Not available
Explosive properties: ==
Oxidizing properties: Not available
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.

Print date 29/03/2022 Production Name KERABOND T GREY Page n. 2 of 6

6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Provide adequate ventilation.
Use appropriate respiratory protection.
Environmental precautions
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Methods and material for containment and cleaning up
Take up mechanically and dispose of according to local/state/federal regulations
Scoop into containers and seal for disposal.
Retain contaminated washing water and dispose it.

7: Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes, inhalation of vapours and mists.
Do not use on extensive surface areas in premises where there are occupants.
Use localized ventilation system.
Don't use empty container before they have been cleaned.
Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Contaminated clothing should be changed before entering eating areas.
Do not eat or drink while working.
See also section 8 for recommended protective equipment.
Conditions for safe storage, including any incompatibilities
Always keep in a well ventilated place.
Keep away from food, drink and feed.
Incompatible materials:
None in particular.
Instructions as regards storage premises:
Cool and adequately ventilated.

8: Exposure controls/personal protection

Control parameters

List of components with OEL value

Component OEL Country Ceiling Long Long Short Short Behaviour Note
Type Term Term Term Term
mg/m3 ppm mg/m3 ppm
portland cement, Cr(VI) IDN INDONESIA 10 5 mg/m3 TWA (containing
< 2 ppm <1% of free Silica,
respirable dust);10 mg/m3
TWA (containing <1% of
free Silica, total dust)

ZAF SOUTH AFRICA 10

ARE UNITED ARAB 10 A4 - Not Classifiable as a
EMIRATES Human
Carcinogen;pulmonary
function;respiratory
symptoms;asthma

PAN PANAMA 5.000 30

IDN INDONESIA 10 10 mg/m3 PEL
MEX MEXICO 1
IND INDIA 10
IDN INDONESIA 10
ZAF SOUTH AFRICA 5
COL COLOMBIA 1
PER PERU 10
ARE UNITED ARAB 10
EMIRATES

PAN PANAMA 10 10
PAN PANAMA 5 10

Print date 29/03/2022 Production Name KERABOND T GREY Page n. 3 of 6

 PAN PANAMA 10 20
Appropriate engineering controls: Not available
Individual protection measures, such as personal protective equipment (PPE)
Eye protection:
Use close fitting safety goggles, don't use eye lens.
Protection for skin:
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Protection for hands:
Suitable materials for safety gloves; EN ISO 374:
Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min.
Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min.
Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min.
Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Nitrile gloves are suggested (1,3 mm; 480 min). Not recommended gloves: not waterproof gloves
Use protective gloves that provides comprehensive protection, e.g. P.V.C., neoprene or rubber.
Respiratory protection:
Personal Protective Equipment should comply with relevant CE standards (as EN ISO 374 for gloves and EN ISO 166 for goggles),
correctly maintained and stored. Consult the supplier to check the suitability of equipment against specific chemicals and for user
information.
A dust mask (P2) should be worn if above exposure limits (EN 149)
Use respiratory protection where ventilation is insufficient or exposure is prolonged.

9: Physical and chemical properties

Physical state Solid
Color: Grey
Appearance: powder
Odour: cement like
Odour threshold: Not available
pH: Not available
pH (water dispersion, 10%): 12.00
Melting point / freezing point: Not available
Initial boiling point and boiling range: Not available
Flash point: Not available
Evaporation rate: Not available
Solid/gas flammability: Not available
Upper/lower flammability or explosive limits: Not available
Vapour pressure: Not available
Vapour density: Not available
Relative density: Not available
Solubility in water: <5 g/l
Solubility in oil: Insoluble
Partition coefficient (n-octanol/water): Not available
Auto-ignition temperature: Not available
Decomposition temperature: Not available
Viscosity: Not available

10: Stability and reactivity

Reactivity
Stable under normal conditions
Chemical stability
Data not available.
Possibility of hazardous reactions
None.
Conditions to avoid
Stable under normal conditions.
Incompatible materials
None in particular.
Hazardous decomposition products

11: Toxicological information

Information on toxicological effects
Contains cement. Cement gives a strong alkaline reaction with water and body fluids (e.g. sweat and eye fluids), therefore the
Print datecontact with skin29/03/2022 Production
and eyes should Name
be carefully KERABOND T GREY
avoided. Page n. 4 of 6
 Contains cement. Cement gives a strong alkaline reaction with water and body fluids (e.g. sweat and eye fluids), therefore the
contact with skin and eyes should be carefully avoided.

Toxicological information of the product: No data available

12: Ecological information

Ecotoxicity
Adopt good working practices, so that the product is not released into the environment.
Eco-Toxicological Information:

List of Eco-Toxicological properties of the product

No data available
Persistence and degradability

Not available
Bioaccumulative potential

Not available
Mobility in soil

Not available
Other adverse effects

No Components with evironmental hazard properties found.

13: Disposal considerations

Disposal methods
The generation of waste should be avoided or minimized wherever possible. Recover if possible.
Methods of disposal:
Disposal of this product, solutions, packaging and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local authority requirements.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor.
Do not dispose of waste into sewers.
Disposal considerations:
Do not allow to enter drains or watercourses.
Dispose of product according to all federal, state and local applicable regulations.
If this product is mixed with other wastes, the original waste product code may no longer apply and the appropriate code should be
assigned.
Dispose of containers contaminated by the product in accordance with local or national legal provisions. For further information,
contact your local waste authority.
Special precautions:
This material and its container must be disposed of in a safe way. Care should be taken when handling untreated empty containers.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Empty containers or liners may retain some product residues. Do not re-use empty containers.

14: Transport information

Not classified as dangerous in the meaning of transport regulations.
UN number
Not available
UN proper shipping name
Not available
Transport hazard class(es)
Not available
Packing group, if applicable
Road and Rail ( ADR-RID ) :
Not available
Air ( IATA ) :
Not available
Sea ( IMDG ) :
Not available
Environmental hazards
Marine pollutant: No
Environmental Pollutant: Not available
Special precautions for user
Not available
Print date 29/03/2022 Production Name KERABOND T GREY Page n. 5 of 6
 Not available
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not available

15: Regulatory information

Safety, health and environmental regulations specific for the product in question
This Safety Data Sheet has been prepared according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS),
Fifth revised edition.
SCAQMD Rule 1113 : NA
SCAQMD Rule 1168: 0

16: Other information

Code Description
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
This document was prepared by a competent person who has received appropriate training.
Main bibliographic sources:
ECDIN - Environmental Chemicals Data and Information Network - Joint Research Centre, Commission of the European
Communities
SAX's DANGEROUS PROPERTIES OF INDUSTRIAL MATERIALS - Eight Edition - Van Nostrand Reinold
Insert here further consulted bibliography
The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and
constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to the specific use intended.
This SDS cancels and replaces any preceding release.
Legend to abbreviations and acronyms used in the safety data sheet:
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
RID: Regulation Concerning the International Transport of Dangerous Goods by Rail.
IMDG: International Maritime Code for Dangerous Goods.
IATA: International Air Transport Association.
IATA-DGR: Dangerous Goods Regulation by the "International Air Transport Association" (IATA).
ICAO: International Civil Aviation Organization.
ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO).
GHS: Globally Harmonized System of Classification and Labeling of Chemicals.
CLP: Classification, Labeling, Packaging.
EINECS: European Inventory of Existing Commercial Chemical Substances.
INCI: International Nomenclature of Cosmetic Ingredients.
CAS: Chemical Abstracts Service (division of the American Chemical Society).
GefStoffVO: Ordinance on Hazardous Substances, Germany.
LC50: Lethal concentration, for 50 percent of test population.
LD50: Lethal dose, for 50 percent of test population.
DNEL: Derived No Effect Level.
PNEC: Predicted No Effect Concentration.
TLV: Threshold Limiting Value.
TWATLV: Threshold Limit Value for the Time Weighted Average 8 hour day. (ACGIH Standard).
STEL: Short Term Exposure limit.
STOT: Specific Target Organ Toxicity.
WGK: German Water Hazard Class.
KSt: Explosion coefficient.

Print date 29/03/2022 Production Name KERABOND T GREY Page n. 6 of 6

Safety Data Sheet
KERABOND T WHITE
Safety Data Sheet dated: 11/03/2021 - version 1
Date of first edition: 11/03/2021

1: Identification
GHS Product Identifier
Mixture identification:
Trade name: KERABOND T WHITE
Trade code: 900012
Recommended use of the chemical and restrictions on use
Recommended use: Cement based powder adhesive
Uses advised against: Not available
Supplier's details
Company: MAPEI CONSTRUCTION CHEMICALS L.L.C
P.O. BOX 73869 DUBAI - United Arab Emirates
Responsible: info@mapei.ae
Office: 00971 4 8156666
Factory : 00971 4 8858428
Emergency phone number
Office: 00971 4 8156666

2: Hazard identification
Classification of the substance or mixture

Skin Irrit. 2 Causes skin irritation.

Eye Dam. 1 Causes serious eye damage.
Skin Sens. 1B May cause an allergic skin reaction.
STOT SE 3 May cause respiratory irritation.
Adverse physicochemical, human health and environmental effects:
No other hazards
GHS label elements, including precautionary statements
Pictograms and Signal Words

Danger

Hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary statements:
P261 Avoid breathing dust.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.

P312 Call a POISON CENTER if you feel unwell.

P321 Specific treatment (see supplementary instructions on this label)
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards which do not result in a classification
Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 1 of 6
Other hazards which do not result in a classification
No other hazards
This preparation contains cement. Contact between cement and body fluids (e.g. sweat and eye fluids) may cause irritation or
burns.

3: Composition/information on ingredients
Substances
Not available
Mixtures

Hazardous components within the meaning of GHS and related classification:

Concentration Name Ident. Numb. Classification Registration Number
(% w/w)
≥25 - <50 % portland cement, Cr(VI) < 2 ppm CAS:65997-15-1 Skin Irrit. 2, H315; Skin Sens. 1B,
EC:266-043-4 H317; Eye Dam. 1, H318; STOT
SE 3, H335

4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
OBTAIN IMMEDIATE MEDICAL ATTENTION.
Remove contaminated clothing immediately and dispose of safely.
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
In case of inhalation, consult a doctor immediately and show him packing or label.
Most important symptoms/effects, acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema
Indication of immediate medical attention and special treatment needed, if necessary
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment:
(see paragraph 4.1)

5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: Not available
Explosive properties: ==
Oxidizing properties: Not available
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.

6: Accidental release measures

Personal precautions, protective equipment and emergency procedures
Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 2 of 6
Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Provide adequate ventilation.
Use appropriate respiratory protection.
Environmental precautions
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Methods and material for containment and cleaning up
Take up mechanically and dispose of according to local/state/federal regulations
Scoop into containers and seal for disposal.
Retain contaminated washing water and dispose it.

7: Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes, inhalation of vapours and mists.
Do not use on extensive surface areas in premises where there are occupants.
Use localized ventilation system.
Don't use empty container before they have been cleaned.
Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Contaminated clothing should be changed before entering eating areas.
Do not eat or drink while working.
See also section 8 for recommended protective equipment.
Conditions for safe storage, including any incompatibilities
Always keep in a well ventilated place.
Keep away from food, drink and feed.
Incompatible materials:
None in particular.
Instructions as regards storage premises:
Cool and adequately ventilated.

8: Exposure controls/personal protection

Control parameters

List of components with OEL value

Component OEL Country Ceiling Long Long Short Short Behaviour Note
Type Term Term Term Term
mg/m3 ppm mg/m3 ppm
portland cement, Cr(VI) IDN INDONESIA 10 5 mg/m3 TWA (containing
< 2 ppm <1% of free Silica,
respirable dust);10 mg/m3
TWA (containing <1% of
free Silica, total dust)

ZAF SOUTH AFRICA 10

ARE UNITED ARAB 10 A4 - Not Classifiable as a
EMIRATES Human
Carcinogen;pulmonary
function;respiratory
symptoms;asthma

PAN PANAMA 5.000 30

IDN INDONESIA 10 10 mg/m3 PEL
MEX MEXICO 1
IND INDIA 10
IDN INDONESIA 10
ZAF SOUTH AFRICA 5
COL COLOMBIA 1
PER PERU 10
ARE UNITED ARAB 10
EMIRATES

PAN PANAMA 10 10
PAN PANAMA 5 10
PAN PANAMA 10 20
Appropriate engineering controls: Not available
Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 3 of 6
Appropriate engineering controls: Not available
Individual protection measures, such as personal protective equipment (PPE)
Eye protection:
Use close fitting safety goggles, don't use eye lens.
Protection for skin:
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Protection for hands:
Suitable materials for safety gloves; EN ISO 374:
Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min.
Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min.
Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min.
Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Nitrile gloves are suggested (1,3 mm; 480 min). Not recommended gloves: not waterproof gloves
Use protective gloves that provides comprehensive protection, e.g. P.V.C., neoprene or rubber.
Respiratory protection:
Personal Protective Equipment should comply with relevant CE standards (as EN ISO 374 for gloves and EN ISO 166 for goggles),
correctly maintained and stored. Consult the supplier to check the suitability of equipment against specific chemicals and for user
information.
A dust mask (P2) should be worn if above exposure limits (EN 149)
Use respiratory protection where ventilation is insufficient or exposure is prolonged.

9: Physical and chemical properties

Physical state Solid
Color: white
Appearance: powder
Odour: cement like
Odour threshold: Not available
pH: Not available
pH (water dispersion, 10%): 12.00
Melting point / freezing point: Not available
Initial boiling point and boiling range: Not available
Flash point: Not available
Evaporation rate: Not available
Solid/gas flammability: Not available
Upper/lower flammability or explosive limits: Not available
Vapour pressure: Not available
Vapour density: Not available
Relative density: Not available
Solubility in water: <5 g/l
Solubility in oil: Insoluble
Partition coefficient (n-octanol/water): Not available
Auto-ignition temperature: Not available
Decomposition temperature: Not available
Viscosity: Not available

10: Stability and reactivity

Reactivity
Stable under normal conditions
Chemical stability
Data not available.
Possibility of hazardous reactions
None.
Conditions to avoid
Stable under normal conditions.
Incompatible materials
None in particular.
Hazardous decomposition products

11: Toxicological information

Information on toxicological effects
Contains cement. Cement gives a strong alkaline reaction with water and body fluids (e.g. sweat and eye fluids), therefore the
contact with skin and eyes should be carefully avoided.
Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 4 of 6
 Contains cement. Cement gives a strong alkaline reaction with water and body fluids (e.g. sweat and eye fluids), therefore the
contact with skin and eyes should be carefully avoided.

Toxicological information of the product: No data available

12: Ecological information

Ecotoxicity
Adopt good working practices, so that the product is not released into the environment.
Eco-Toxicological Information:

List of Eco-Toxicological properties of the product

No data available
Persistence and degradability

Not available
Bioaccumulative potential

Not available
Mobility in soil

Not available
Other adverse effects

No Components with evironmental hazard properties found.

13: Disposal considerations

Disposal methods
The generation of waste should be avoided or minimized wherever possible. Recover if possible.
Methods of disposal:
Disposal of this product, solutions, packaging and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local authority requirements.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor.
Do not dispose of waste into sewers.
Disposal considerations:
Do not allow to enter drains or watercourses.
Dispose of product according to all federal, state and local applicable regulations.
If this product is mixed with other wastes, the original waste product code may no longer apply and the appropriate code should be
assigned.
Dispose of containers contaminated by the product in accordance with local or national legal provisions. For further information,
contact your local waste authority.
Special precautions:
This material and its container must be disposed of in a safe way. Care should be taken when handling untreated empty containers.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Empty containers or liners may retain some product residues. Do not re-use empty containers.

14: Transport information

Not classified as dangerous in the meaning of transport regulations.
UN number
Not available
UN proper shipping name
Not available
Transport hazard class(es)
Not available
Packing group, if applicable
Road and Rail ( ADR-RID ) :
Not available
Air ( IATA ) :
Not available
Sea ( IMDG ) :
Not available
Environmental hazards
Marine pollutant: No
Environmental Pollutant: Not available
Special precautions for user
Not available
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 5 of 6
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not available

15: Regulatory information

Safety, health and environmental regulations specific for the product in question
This Safety Data Sheet has been prepared according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS),
Fifth revised edition.
SCAQMD Rule 1113 : NA
SCAQMD Rule 1168: 0

16: Other information

Code Description
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
This document was prepared by a competent person who has received appropriate training.
Main bibliographic sources:
ECDIN - Environmental Chemicals Data and Information Network - Joint Research Centre, Commission of the European
Communities
SAX's DANGEROUS PROPERTIES OF INDUSTRIAL MATERIALS - Eight Edition - Van Nostrand Reinold
Insert here further consulted bibliography
The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and
constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to the specific use intended.
This SDS cancels and replaces any preceding release.
Legend to abbreviations and acronyms used in the safety data sheet:
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
RID: Regulation Concerning the International Transport of Dangerous Goods by Rail.
IMDG: International Maritime Code for Dangerous Goods.
IATA: International Air Transport Association.
IATA-DGR: Dangerous Goods Regulation by the "International Air Transport Association" (IATA).
ICAO: International Civil Aviation Organization.
ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO).
GHS: Globally Harmonized System of Classification and Labeling of Chemicals.
CLP: Classification, Labeling, Packaging.
EINECS: European Inventory of Existing Commercial Chemical Substances.
INCI: International Nomenclature of Cosmetic Ingredients.
CAS: Chemical Abstracts Service (division of the American Chemical Society).
GefStoffVO: Ordinance on Hazardous Substances, Germany.
LC50: Lethal concentration, for 50 percent of test population.
LD50: Lethal dose, for 50 percent of test population.
DNEL: Derived No Effect Level.
PNEC: Predicted No Effect Concentration.
TLV: Threshold Limiting Value.
TWATLV: Threshold Limit Value for the Time Weighted Average 8 hour day. (ACGIH Standard).
STEL: Short Term Exposure limit.
STOT: Specific Target Organ Toxicity.
WGK: German Water Hazard Class.
KSt: Explosion coefficient.

Print date 29/03/2022 Production Name KERABOND T WHITE Page n. 6 of 6

 ‫إدارة مختبر دبي المركزي‬
Organization/Unit: :‫الوحدة التنظيمية‬
Dubai Central Laboratory Department
TEST REPORT
Document Title: VOC CONT.OF ADHESIVES/SEALANTS/VARIOUS :‫عنوان الوثيقة‬
MATERIALS
Doc. Ref. : DM-DCLD-F-CM-0100 ‫ل‬:‫رقم الوثيقة‬
CONSTRUCTION MATERIAL LABORATORY SECTION
CHEMICAL ANALYSIS OF CONSTRUCTION MATERIAL UNIT
Report No: 456299 Request No: EMTX-2022-1026363

Project No: CF-407 Report Date: 27/06/2022 02:13PM

Project Name: MAPEI CONSTRUCTION CHEMICALS L.L.C

Consultant: DUBAI MUNICIPALITY

Contractor: MAPEI CONSTRUCTION CHEMICALS LLC

Location: * Site- at Jumeirah -Meraas
Source: * MAPEI CONSTRUCTION CHEMICALS L.L.C - DUBAI
Sample Description: * ADHESIVE
Product Name: * KERABOND T (Grey)

Sampling Date/Time: * 06/06/2022 01:53PM Lot/Batch/Coil/Heat No.* Not Given

Receiving Date/Time: 20/06/2022 12:49PM Lot Size: * NA

Sample Size /Quantity: 1 kilogram Sender No: AJ4502
Material/Mix Type: * NA Laying Date/Production Date: * NA
Nominal Size / Working Block Size (mm) : NA

TEST RESULTS
PARAMETER RESULTS

VOC Content in g/L 5

SPECIFICATION LIMIT * NOT GIVEN

Sampled By: AMKUTTY (DCL) Tested By: RAMAKM

Sampled Brought By: AMKUTTY (DCL) Testing Date: 20/06/2022 12:49PM
Sampling Method: DCL-IC-99 Sampling Report No: NA
Test Method: DMS 0033 : 2016 Test Method Variation: NIL

Remarks: CUSTOMER PERFORMED SAMPLING AND PROVIDED THE SAMPLE; THE RESULTS APPLY ONLY TO THE SAMPLE AS
RECEIVED AND TESTED.EXEMPT COMPOUNDS NOT CALCULATED. THIS TEST METHOD IS CHOSEN BY CUSTOMER.

Disclaimer : * Information is supplied by the customer and Laboratory is not responsible for this data.

To verify this document please go to : hiips://www.dm.gov. ae/#check-tab5

Enter Document ID: EMTX-2022-1026363 and Verification Code: 711899
or Scan the QR code below.

*** END OF REPORT ***

This report is computer approved and authorized by Head of Unit and does not require any signature .

PO Box 67, Dubai, UAE - Tel: (+971 4) 3027216 - Email: labs@dm.gov.ae - Website: hiip://www.dm.gov.ae
This report shall not be reproduced except in full without approval of the laboratory.
Date of Issue : 02/05/2021 Rev No. : 3
Open Data / ‫بيانات مفتوحة‬ Level of Confidentiality / ‫درجة السرية‬ Page 1 of 1
 Dubai Central Laboratory
Construction Materials Laboratory Section - Chemical Analysis Unit
TEST REPORT
VOC CONT.OF ADHESIVES/SEALANTS/VARIOUS MATERIALS

Report No: 100023220 Request No: EMTX-2016-005218

Project No: PS15-0177 Report Date: 04/01/2017

Project Name: TSF MAPEI CONSTRUCTION CHEMICALS LLC
Consultant: NA

Contractor: MAPEI CONSTRUCTION CHEMICALS LLC

Location: MAPEI-DUBAI-UAE

Source: NOT GIVEN

Sample Description: ADHESIVE.
Sampling Date/Time: 26/10/2016 09:00 AM Lot Number: NA
Receiving Date/Time: 13/12/2016 08:00 AM Lot Size: NA kilogram
Sample Size: 25 kilogram Sender No: 0566866404
Material/Mix type: Laying Date/Production Date:

Nominal Size / Working Block Size L * T * H (mm) :

TEST RESULTS
PARAMETERS RESULTS
VOC Content in g/L <1

Sampled By: BABAK SALEHI(MFR) Tested By: NKPULIYAN

Samples Brought By: BABAK SALEHI(MFR) Testing Date: 29/12/2016 07:39 AM
Sampling Method: NOT GIVEN Sampling Report No:
Test Method: DMS-0033:2016 Test Method Variation: NIL

Remarks: PRODUCT NAME: KERABOND T

To verify this document please go to http://login.dm.gov.ae/wps/portal/documentverification and

Enter Document ID: EMTX-2016-005218 and Verification Code: 051-605 or scan the QR code below.

This Report is computer approved and authorized by Chemical Analysis Unit

It does not require any signature

Doc. Ref: F-EM-0100 Rev.No :1

Issue Date: 03/10/2016 Page :1 of 1
P.O. BOX: 67 DUBAI, TEL : 00971-4-3369900, FAX : 00971-4-3366399
E-mail: labs@dm.gov.ae Website: http://www.dm.gov.ae
 10-Jun-2021

We have no objection on Kerabond T /Adhesive Tile Glue materiel subject to the following:
1.Strictly comply with drawings , project specification and relevant authority regulations and requirements
2.Manufacturer recommendations and instructions to be strictly followed.
3.MIR to be submitted.
4.Mock up to be provided prior commencement the work for the final approval.

Amr Abdelbary - Resident Engineer 12.06.2021

h#h
,FSBCPVOE
5
JT
BDDFQUBCMF
GPS
QPSDFMBJO
UJMFT
PUIFS
UIBO
DIFNJDBM
SFTJTUBOU
UJMFT
4VSGBDF
QSFQBSBUJPO
NJYJOH
BOE
BQQMJDBUJPO
TIBMM
CF
BT
QFS
UIF
NBOVGBDUVSFST
SFDPNNFOEBUJPOT


$PNQBUJCMF
$IFNJDBM
SFTJTUBOU
BEIFTJWF
UP
CF
QSPQPTFE
DIFNJDBM
SFTJTUBODF

UJMFT

)BSPPO 
1/18/2021 Aconex

Marsa Al Arab
14 Al Seef Street
Dubai
United Arab Emirates

MAIL TYPE MAIL NUMBER REFERENCE NUMBER

Workflow Transmittal ATKINS-WTRAN-011521 ATKINS-WTRAN-011521

Final (WF-021485) MAA-ASGC-ARC-CCD-000440-R1_Material Submittal for Tiles

Adhesive & Grout Works (Kerapoxy & Kerabond T)- M/s Mapei

From Atkins Site Office - Marsa Al Arab - ATKINS

To (5) Mr Burri Thirupathi - ASGC Construction LLC (+4 more...)

Cc (15) Mr Prem Kumar - ASGC Construction LLC (+14 more...)

Sent Sunday, 17 January 2021 10:29:41 AM -03:00 (GMT -03:00)

Status N/A

DOCUMENT ATTACHMENTS (1)

(0 selected)

Revision
File Document No Revision Title Status
Date

MAA-ASGC-ARC- Material Submittal for Tiles Adhesive & Grout Works B - Approved
1 13/01/2021
CCD-000440 (Kerapoxy & Kerabond T)- M/s Mapei As Noted

ATTRIBUTES

Attribute 1 02 Architecture

Attribute 2 01 MAA Project Wide

Attribute 3 Construction

MESSAGE

Workflow Review History

The attached documents have completed the "MAA-ASGC-ARC-CCD-000440-R1_Material Submittal for Tiles Adhesive & Grout Works
(Kerapoxy & Kerabond T)- M/s Mapei" workflow with the following results :

This transmittal was automatically generated.

https://mea.aconex.com/Logon 1/2
1/18/2021 Aconex

Doc No Step Participant Review Comments

Outcome

This submittal is previously Code B, therefore Atkins have no technical objection

subject to all substantiation provided in Rev 01 for Rev 00 comments. However,
MAA-
comply to the following: 1) Primer G prior to Kerabond T for gypsum board is only
ASGC- B-
Consultant A Marsa for ceramic tiles, in case of use with alternate finishes, provide manufacturer letter
ARC- Approved
Review Al Arab of recommendation for compatibility (as applicable) 2) Primer G technical data
CCD- As Noted
does not particularly recommend usage in wet areas; provide manufacturer letter
000440
of recommendation for use in such areas 3) General comments to be adhered as
per Rev 00 4) Grout sample board not provided for review

https://mea.aconex.com/Logon 2/2
 SUBMITTAL FORM
Project : Contractor / Package Aconex Doc No. Revision
Parsons Regional Headquarters Multiplex / Main PHQ-AAM-AR-AB-SW-MT-0019
Contract 02
To: OMNIUM Submittal Issue Date : 23-12-2018

Type of Work ‫ ܈‬Architectural ‫ ܆‬Structural ‫ ܆‬Electrical ‫ ܆‬HVAC ‫ ܆‬Interior Design

‫ ܆‬Infrastructure ‫ ܆‬Landscape ‫ ܆‬Mechanical ‫ ܆‬Survey ‫ ܆‬Others ( )

Description:- Submission Type
Material Submittal for Kerabond T Cementitious ‫ ܈‬Material Submission ‫ ܆‬Manual
Adhesive for Ceramic Tile Flooring and ‫ ܆‬Calculation ‫ ܆‬Report
Cladding
‫ ܆‬Other (…………………..) ‫ ܆‬Method Statement
Location of Use:- Tile Flooring & Tile Cladding Contract Specification Clause Ref:- 093013 - CERAMIC TILING

SPECIFIED PROPOSED
[NB: For alternative materials a Compliance Report must be provided]

MFR MFR
AGENT AGENT

MAKE/ MAKE/ MAPEI - KERABOND T CEMENTITIOUS ADHESIVE

MODEL MODEL

CAPACITY/ CAPACITY/
SIZE SIZE

MPX Review Comments: Digital Stamping

DOCUMENT /
DRAWINGS
REVIEW STAMP

✔ A - Approved

B - Approved As Noted

C - Not Approved - Revise / Resubmit

Checked by : Vikram Ramdas Datee : 29-12-2018

Documents receiving an A or B status are considered to conform with the

design intent,but does not mean acceptance of dimensions, sizes or weights;
nor does it relieve the Subcontractor/Consultant from any responsibility for
errors,, omissions and/or compliance with obligations and/or responsibility of

Vikram Ramdas
Name……………………….
……………………. Signature………………………
Signat 29-12-2018
Date………………………..
……………………..
Consultancy agreement
the Contract and/or Consu

Consultant
ant Review Comments: Digital Stamping
Dig
-3lease
e UeIeU
reIer tR tKe FRmment belRw
belRZ a at UesRlutiRn sKeet anG FRmplianFe statement
-5eIeU tR stampeG anG apprRYeG
appURYeG sKRp GUaZings Rnl\ IRU lRFatiRn RI usage
-SubMeFt tR mRFN-up at site anG pull test Uesult
-0etKRG statement tR be pURYiGeG sepaUatel\

Mina Sawires 03-01-19

Mina Sawires
Name………………………. Signature……………………… 03.01.2019
Date………………………..
Consultant Review Comments: Digital Stamping

Name………………………. Signature……………………… Date………………………..

Client Review Comments: Digital Stamping
* Submittal stuffed with more inappropriate documents. PARSONS
Parsons Regional Headquarters Project
* As mentioned in the material data sheet, it has to be used for fixing the tiles with maximum size of 600 x 300 DOCUMENT / DRAWING REVIEW STAMP

mm . MAPEI' confirmation letter is required should this material to be used for fixing a bigger size tiles. A - Approved
* Material is not suitable for fixing the tiles over the dry wall partitions. Contractor to assure comply with all
✔ B - Approved as Noted
manufacturer recommendations.
* Refer to supervision consultant comments above. all comments should be attended. C - Not Approved - Revise/Resubmit

* Supervision consultant's inspection and approval of all delivered material are mandatory before using the Checked By: Yasser Gharib Date: 07.01.2019

material at the site. Documents receiving an A or B status are considered to

conform with the design intent but does not mean acceptance of
dimensions, sizes or weights; nor does it relieve the
Subcontractor/Consultant from any responsibility for errors,

Yasser Gharib January 07, 2019 omissions and/or compliance with obligations and/or

Name………………………. Signature……………………… Date……………………….. responsibility of the Contract and/or Consultancy agreement.

Scanned with CamScanner
Scanned with CamScanner
 KERABOND T - PRODUCT REFERENCES
CONSULTANT/
YEAR PROJECT SUBCATEGORY APPLICATION TYPE APPLICATION CONTRACTOR CITY/ COUNTRY
ARCHITECT
The Address Residence - A2 & A3 INTERNAL FLOOR AND
2022 RESIDENCE INTERNAL Alshirawi KHATIB AND ALAMI Dubai, UAE
TOWERS - Dubai Opera WALLS & BATHROOMS

INSTALLATION OF FLOOR LACASA Architectural

2022 MUROOJ ALFURJAN VILLA Internal/External ASGC Dubai, UAE
AND WALL COVERINGS Consultants

2022 One Za'abeel APARTMENTS FLOOR/WALL COVERING INTERNAL Depa Interiors Nikken Sikkei/ WSP Dubai, UAE

Aykon City - The Residence -

2022 TOWER Ceramic & Concrete repair INTERNAL/EXTERNAL China State LACASA Dubai, UAE
Tower C
Aykon City - Damac Maison
2022 Hotel Apartments (Tower B) on TOWER Ceramic & Concrete repair INTERNAL/EXTERNAL China State LACASA Dubai, UAE
Plot No. 346-0163
The Beach Isle Resdence at CONCRETE POST-
2022 RESIDENTIAL BUILDINGS CONCRETE RESTORATION ABM Mirage Dubai, UAE
Dubai Harbour TENSIONED SLAB

2022 Burj Crown in Downtown Dubai APARTMENTS FLOOR/WALL COVERING Internal ABM Dubai Consult Dubai, UAE

2021 Wilton Terraces 1 in MBR city RESIDENCE FLOOR/WALL COVERING INTERNAL Aroma intl contg Dubai consultants Dubai, UAE

2021 Shj cooperative soceity- Qurain COMMERCIAL FACILITIES Interiors floors/wall INTERNAL Munawel Interiors - Sharjah,UAE

Rahmania mall- Shj cooperative

2021 SUPERMARKET FLOOR/WALL COVERING INTERNAL Omis Contracting QHC Dubai, UAE
soceity

2021 Emirati housing in Jumeriah RESIDENCE FLOOR/WALL COVERING INTERNAL Dubco constructions Signature Dubai, UAE

The Address Residences - Opera Tepe Akfen Ventures

2021 HOTEL/INN CONCRETE REPAIR Internal walls and floors, Lobby Khatib & Alami Dubai, UAE
District (TAV)
MOVEN PICK AL MARJAN INSTALLATION OF WALL
2021 HOTEL/INN EXTERNAL Al Ali Construction Al Bonian Dubai, UAE
ISLAND COVERINGS
DOUBLE THREE HILTON JUMEIRA
INSTALLATION OF WALL
2021 GATE UNDERPASS HOTEL/INN EXTERNAL MULTIPLEX FOSTER Dubai, UAE
COVERINGS
WATERFEATURE
CAESAR PALACE HOTEL
2021 HOTEL/INN WATERPROOFING EXTERNAL MIRAGE LEISURE ATKINS Dubai, UAE
SWIMMING POOL
INSTALLATION OF WALL
2021 BAGERI FORM D3 LAB INTERNAL BRIGHT START H&H DESIGN Dubai, UAE
COVERINGS

2021 AL JADAF TENNIS COURT HOTEL/INN INSTALLATION OF FLOORS EXTERNAL WAFI GROUP Dubai, UAE
INSTALLATION OF FLOOR
Bowyer Wick Building
2020-2021 The Arts Club - DIFC CULTURAL CENTER AND WALL COVERINGS / Internal Floors and walls, Lobby Turner / AAID Dubai, UAE
Contracting LLC
WATER PROOFING /
 KERABOND T - PRODUCT REFERENCES
CONSULTANT/
YEAR PROJECT SUBCATEGORY APPLICATION TYPE APPLICATION CONTRACTOR CITY/ COUNTRY
ARCHITECT
INSTALLATION OF FLOOR
2020-2021 PRIVATE VILLAS Dr. Ghanem VILLA Internal Application Sicon Arch. Corp Consultant Sharjah,UAE
AND WALL COVERINGS

2020 Rashid Hospital HOSPITAL FLOORING INTERIOR - - Dubai, UAE

2020 EXPO 2020 - Thematic Districts CULTURAL CENTER FLOOR INSTALLATIONS Ceramic tile installation - - Dubai, UAE

2020 HAVE CAFÉ' RESTAURANT FLOOR/WALL COVERING Internal Application Minor Contract. Steinart Factory Dubai, UAE

Waterproofing & porcelain tile

2020 Sobha Forest villas APARTMENT FLOOR & WALL COVERING Sobha hartland contg PNC Dubai, UAE
installation
Alshafar General
2020 Aloft Hotel - Al Garhoud HOTEL/ INN/ RESORT FLOOR & WALL COVERING Internal Buro Kling Dubai, UAE
contracting (ASGC)
Alshafar General
2020 Aloft Hotel - AlRafaa HOTEL/ INN/ RESORT FLOOR & WALL COVERING Internal Buro Kling Dubai, UAE
contracting (ASGC)
Avalon Tower in Jumeirah Intermass Engineering Al Hawraa Engineering
2020 HOTEL/ INN/ RESORT FLOOR & WALL COVERING Internal Dubai, UAE
Village Circle Contracting Company Consultants
DUBAI CREEK HARBOUR - Alshafar General ATK Engineering
2020 APARTMENT FLOOR & WALL COVERING Internal Dubai, UAE
HARBOUR VIEWS contracting (ASGC) Consultants

2020 Five Hotel Jumeirah Village hOTEL/ INN/ RESORT FLOOR & WALL COVERING Internal CSCME Atkins Global Dubai, UAE

2020 Expo 2020 CoEx Campus EXHIBITION CENTER FLOOR & WALL COVERING Tile installation ALEC Woods Bagot Dubai, UAE

Shapoorji pallonji
2020 Expo Village APARTMENT FLOOR & WALL COVERING Tile installation KEO Dubai, UAE
China State
Parsons Regional Headquarters COMMERCIAL BUILDING/ Gutteridge Haskins and
2020 FLOOR & WALL COVERING Internal Multiplex Abu Dhabi, UAE
in Capital District OFFICES Davey (GHD Global)
Ext Premier Inn hotel, Ibn
2020 HOTEL/ INN/ RESORT FLOOR & WALL COVERING Ceramic tile installation AL Ghurair CEW Arif & Bintoak Dubai, UAE
Batutta
Fakeeh Acedemic medical centre
2020 HOSPITAL FLOOR COVERING Tile installation Shapoorji pallonji Stantec International Dubai, UAE
in Dubai silicon oasis
Installation of Granite in External Pick
2020 Wafi Hotel Expansion HOTEL/ INN/ RESORT FLOOR COVERING Al Fara'a GC Arkiteknik Int. Dubai, UAE
Up Area.
2019-2020 Wafi Hotel Expansion HOTEL/INN INSTALLATION OF FLOORS EXTERNAL Al Fara'a GC Arkiteknik Int. Dubai, UAE
Alshafar General
2019-2020 One Central - The 25hours hotel HOTEL/ INN/ RESORT FLOOR & WALL COVERING Internal Hopkins Architects Dubai, UAE
contracting (ASGC)
2019-2020 VILLANOVA VILLA/ HOUSES FLOOR & WALL COVERING Internal Arabtec Construction LLC ATKINS Dubai, UAE
 KERABOND T - PRODUCT REFERENCES
CONSULTANT/
YEAR PROJECT SUBCATEGORY APPLICATION TYPE APPLICATION CONTRACTOR CITY/ COUNTRY
ARCHITECT
MAG 318 Tower in Business Bay - Intermass Engineering Mimar Engineering
2019-2021 APARTMENT FLOOR & WALL COVERING Internal Dubai, UAE
Plot No. BB.B01.019 Contracting Company Consultants
M/s Bowyer Wick Building
2019-2020 MIDFIELD TERMINAL BUILDING AIRPORT FLOOR & WALL COVERING Internal Abu Dhabi, UAE
Contracting LLC

Engineering Contracting Al Wasl Al Jadeed

2019-2020 UNA Apartments APARTMENT FLOOR & WALL COVERING Internal Dubai, UAE
Company (ECC) Consultants

Structural Reinforcement
/ concrete Restoration/ Interior floors, Lobby, Bathrooms,
2019 Golf view Towers - IMPZ RESIDENCE Bhatia Contracting Federal Consultants Dubai, UAE
Installation of Floor and Swimming Pool
wall coverings

2019 Three Towers APARTMENT floor & wall covering Internal Bu Haleeba Contracting Archgroup Consultants Dubai, UAE
ADAGIO HOTEL AT PALM Al Ghurair CEW, Perfect
2019 HOTEL/ INN/ RESORT FLOOR & WALL COVERING external Arif & Bintoak Dubai, UAE
JUMEIRAH Finish Coating LLC
G+10+P Twin Residential DUBAI DAWN
2019 APARTMENT FLOOR & WALL COVERING Marble installation NEXT ENGINEERING Dubai, UAE
Buidling, Dubai Sports city CONTRACTING
2019 G+20 Residential Building APARTMENT FLOOR & WALL COVERING Ceramic tile installation CONDOR CONTRACTING CONIN Dubai, UAE

2019 British Nursery school SCHOOL FLOOR & WALL COVERING Concrete repair & tile installation Amana NEB Dubai, UAE

2019 Warner Bros Hotel, Abudhabi HOTEL/ INN/ RESORT FLOOR & WALL COVERING Installation of porcelain tiles Shapoorji pallonji GAJ Abu Dhabi, UAE

2019 Al Jadaf Cultural Village APARTMENT FLOOR & WALL COVERING Ceramic tile installation DBB cont BSBG Dubai, UAE
Trojan General
2018-2020 Dubai Hills - Sidra III Villas VILLA/ HOUSES FLOOR & WALL COVERING Internal Al Gurg Consultants Dubai, UAE
Contracting
2018-2019 Mixed Used Buildings - Garhoud APARTMENT FLOOR & WALL COVERING Internal Bu Haleeba Contracting Archgroup Consultants Dubai, UAE
Trojan General
2018-2020 Yas Acres VILLA/ HOUSES FLOOR & WALL COVERING External AECOM Dubai, UAE
Contracting
2018-2020 Arabian Park Hotel Expansion HOTEL/ INN/ RESORT FLOOR COVERING Granite Installation BOWYER WICK EMIRATES ENGINEER Dubai, UAE
INSTALLATION OF FLOOR Trojan General
2018-2020 Yas Acres VILLA Internal walls and floors, Lobby AECOM Dubai, UAE
AND WALL COVERINGS Contracting
The Address Residences - Opera INSTALLATION OF FLOOR Tepe Akfen Ventures
2018-2021 HOTEL/INN Internal walls and floors, Lobby Khatib & Alami Dubai, UAE
District AND WALL COVERINGS (TAV)
2018 - 2019 BERKLEE MUSEUM MUSEUM FLOOR & WALL COVERING external Lindner Contracting LLC GHD Abu Dhabi, UAE
APARTMENTS/VILLA/HOU CHAWLA
2017-2018 GEEPAS PROJECT FLOOR & WALL COVERING GULF ASIA CONTRACTING Dubai, UAE
SES/CONDO RESIDENTIAL FLOORING ARCHTECTURAL
APARTMENTS/VILLA/HOU
2016-18 ANGMP FLOOR & WALL COVERING
SES/CONDO Ceramic & Porcelain tiles installationAl Arif Contracting Co. LLC Arif & Bintoak Dubai, UAE
COMMERCIAL
2017 Meydan Hotel FLOOR & WALL COVERING FAÇADE EXPANSION Joint BEL HASA Adnoc Dubai, UAE
BUILDING/OFFICES
 KERABOND T - PRODUCT REFERENCES
CONSULTANT/
YEAR PROJECT SUBCATEGORY APPLICATION TYPE APPLICATION CONTRACTOR CITY/ COUNTRY
ARCHITECT
School/Educational ARCHITECT/CONSULTA
2017 Emirates Training Academy FLOOR & WALL COVERING Internal Bu Haleeba Dubai, UAE
Facility NT
APARTMENTS/VILLA/HOU
2017 DUBAI CREEK PROJECT FLOOR & WALL COVERING AL BASTI &MUKHTA LLC ATKINS Dubai, UAE
SES/CONDO RESIDENTIAL FLOORING
APARTMENTS/VILLA/HOU
2017 VEDA RESIDENCE FLOOR & WALL COVERING AL BASTI &MUKHTA LLC NOOR CONSULTANT Dubai, UAE
SES/CONDO RESIDENTIAL FLOORING
Downtown Jebel Residential Installation of ceramic tiles in Eastern International Bel-Yoahah
2016 APARTMENT FLOOR & WALL COVERING Dubai, UAE
Buildings - MX01 & MX05 bathrooms Sharjah Architecture &
Serenia Residences - Palm Installation of ceramic tiles in powder Khansaheb Civil Godwin Austen
2016 APARTMENT FLOOR & WALL COVERING Dubai, UAE
Jumeirah rooms Engineering Johnsen Architects
Installation of Marble Stone and San Jose JV, Arabtec Ateliers Jean Nouvel
2015-2017 LOUVRE MUSEUM MUSEUM OTHER Abu Dhabi, UAE
concrete substrates protected. JV,Oger Middle East
Installation of Vinyl flooring and
2015-2017 KHALIFA UNIVERSITY EXPANSION UNIVERSITY FLOORING Fibrex Construction Ramboll Middle East Abu Dhabi, UAE
large stone tiles
2015-2016 W Hotel & Residences HOTEL/ INN/ RESORT FLOORING Installation of Stone Depar Interiors - Dubai, UAE
Residential Building
2015 APARTMENT FLOORING Installation of granite tiles Al Arif Contracting Co. LLC BH.NS Dubai, UAE
(2B+G+13+R) - Al Mamzar
All dry & wet tiles, marble & granite
2015 Al Habtoor City - Residential APARTMENT FLOOR COVERING Habtoor Leighton Group Atkins Dubai, UAE
pavers
COMMERCIAL BUILDING/ Cocktail bar, cook hall, executive
2014 Al Habtoor City FLOOR & WALL COVERING Habtoor Leighton Group Silverfox Dubai, UAE
OFFICES lounge
Residential Building (G+8+R) - Al Al Ajmi Engineering
2013 APARTMENT FLOOR & WALL COVERING All tile works Asteco Contracting LLC Dubai, UAE
Qusais Consultants
2013 Residence Tower APARTMENT FLOOR & WALL COVERING Installation of glass tiles S. Mokbel & Partners BEAD Abu Dhabi, UAE

2013 Saadiyat Beach Villas VILLA/ HOUSES FLOOR COVERING Installation of Marble & Ceramic Tiles Al Jaber - Abu Dhabi, UAE
Jumeirah Village South - II Installation of ceramic tiles for water Ghantoot Trans. & Gen.
2012 VILLA/ HOUSES FLOOR & WALL COVERING Dar Al Handasah Dubai, UAE
Triangle feature Cont. Est
WATERPROOFING Waterproofing Khansaheb Civil
2012 Fujairah City Centre MALL Hyder Fujairah, UAE
FLOORING Installation of tiling Engineering
Al Wahda Mall Extension (Phase
2012 MALL FLOORING Ceramic & Porcelain tiles installation Ali & Sons Contracting Khatib & Alami Abu Dhabi, UAE
2)
 KERABOND T - PRODUCT REFERENCES
CONSULTANT/
YEAR PROJECT SUBCATEGORY APPLICATION TYPE APPLICATION CONTRACTOR CITY/ COUNTRY
ARCHITECT
FLOORING Installation of Ceramic & Porcelain tiles
2011 Three Fishing Harbours HARBOUR Ducto Balfour Beatty DAR Consult Dubai, UAE
SEALING Sealing external walls
WATERPROOFING
CONCRETE REPAIR Floor/Wall Covering, Waterproofing,
2010 Ferrari World - Yas Island THEME PARK Depa - Abu Dhabi JRA Abu Dhabi, UAE
Concrete repair
FLOOR & WALL COVERING
WATERPROOFING Waterproofing Al Gurg Architectural
2010 Emirates Financial Tower APARTMENT T A V construction Dubai, UAE
FLOOR COVERING Marble Installation Consultancy (Dubai)

Installation of Marble, Ceramic, Glass

2010 Al Ghurair Hotel & Apratment APARTMENT FLOOR & WALL COVERING Al Habtoor - Dubai, UAE
Mosaic, Porcelain and Wood flooring
Forever 21 Fitout - Mirdiff City
2010 SHOP/ RETAIL OUTLET FLOOR & WALL COVERING Marble installation Alec Jonson Interiors Dubai, UAE
Centre
2009 Mr. Younis Ibrahim Villa VILLA/ HOUSES FLOOR & WALL COVERING Marble/Ceramic/Porcelain Installation Arab Asia Contg. - Dubai, UAE
Dubai Contracting
2009 Sunset Mall MALL FLOORING Glass tile & Porcelain Installation - Dubai, UAE
Company
Commercial Building in Muroor COMMERCIAL BUILDING/
2009 FLOOR COVERING Agglomorate stone installation Dhafir Development - Abu Dhabi, UAE
Street OFFICES
ITALY
Mapei SpA
Via Cafiero, 22
20158 Milan
+39 02 37673 1
mapei.com - mapei@mapei.it