AUTOLIV INDIA (P) LTD.

, BADLI
Date: 12.06.2024
INSPECTION REPORT Sheet: .
PART NO. 6635436 PURPOSE OF INSPECTION
PART NAME S-Emblem RECEIVING INSP.
APPLICATION AB PROCESS INSP.
CUSTOMER PROCESS CHANGE
VENDOR PROG.CHANGE
REF. QTY.: SAMPLE IINSP.

PARAMETER OBSERVATION Remarks

SPECIFICATIONS
S.No. (in mm)
Method / Position
1 2
100 Dim. (6.4) VMM 6.487 6.456 OK
101 Dim. 2x(18) VMM 18.105 18.112 OK
102 Profile Surface CMM 0.214 0.222 OK
103 Dim. (24.7) VMM 24.276 24.261 OK
104 Dim. (20.4) VMM 20.412 20.425 OK
105 Dim. (8.5) VMM 8.342 8.338 OK
106 Dim. (6.3) VMM 6.312 6.322 OK
107 Dim. (7.5) VMM 7.272 7.261 OK
108 Dim. (11.9) VMM 11.904 11.909 OK
109 Dim. (23.6) VMM 23.177 23.167 OK
110 Dim. (28.3) VMM 28.312 28.323 OK
111 Dim. 2x(18) VMM 18.103 18.107 OK
112 Dim. (5.8) VMM 5.812 5.827 OK
200 Dim. (1.3) VMM 1.33 1.35 OK
201 Dim. 2x(1) VMM 1.23 1.21 OK
202 Dim. (0.6) VMM 0.617 0.613 OK
203 Dim. 2x(0.7) VMM 0.721 0.725 OK
204 Dim. (0.6) VMM 0.622 0.627 OK
205 Flatness CMM 0.145 0.137 OK
206 ANGLE 1.5° VMM 1.47 1.48 OK
302 Dim. 7.6±0.1 VMM 7.61 7.59 OK
303 Dim. 2X7.7±0.1 VMM 7.75 7.76 OK
304 Dim. 7.6±0.1 VMM 7.65 7.66 OK
305 Dim. 2X8±0.1 VMM 8.12 8.09 OK
306 Dim. 8.3±0.1 VMM 8.31 8.36 OK
401 DIA. Ø2 VMM 2.194 2.167 OK
402 DIA. Ø2 VMM 2.15 2.172 OK
500 DIA. Ø2 VMM 2.197 2.188 OK
501 DIA. Ø2 VMM 2.192 2.183 OK
600 Dim. (6.6) VMM 6.617 6.621 OK
601 Dim. (45.3) VMM 45.281 45.274 OK
602 Dim. (22.7) VMM 22.153 22.149 OK
603 Dim. (45.3) VMM 44.382 44.371 OK
700 Position CMM 0.124 0.117 OK
701 Position CMM 0.476 0.442 NG
702 Dim. 32.3 VMM 31.954 31.944 ---
703 Dim. 24.6 VMM 24.31 24.38 ---
704 Dim. 16.2 VMM 16.181 16.176 ---
705 Dim. 7.7 VMM 7.752 7.744 ---
706 Position CMM 0.128 115 OK
707 Dim. 12.6 VMM 12.621 12.654 ---
708 Dim. 12.6 VMM 12.523 12.546 ---
709 ANGLE 60° VMM 60.142° 60.114° ---
710 ANGLE 30.457° 30.548° ---
30° VMM

800 Dim. (8) VMM 8.412 8.419 OK

Dim. OK
804 (6.5) VMM 6.89 6.83
Dim. OK
900 2 VMM 2.078 2.082
Dim. OK
901 4.8 VMM 4.878 4.871
902 Profile Surface CMM 0.217 0.228 OK
1003 Dim. (8) VMM 8.381 8.388 OK
1004 Dim. (8) OK
VMM 8.393 8.372
1100 ANGLE 25° VMM 25.415° 25.158° OK
1101 ANGLE 25° VMM 25.036° 24.968° OK
1102 Dim. 2.4 VMM 2.481 2.467 OK
1203 Dim. (8) VMM 8.417 8.428 OK
1204 Dim. (8) VMM 8.426 8.423 OK
1401 Dim. 7X7±1 VMM 6.871 6.854 OK
Disposition

Rejected
Accepted
Inspected By.:- Pawan Approved By :- Somvir Dahiya

Remarks

Comment on Deviation

Sign(Prod.)
AIM_IQA_F_0001