1、Product Function introduction 3、Instructions for headset touch operation 4、Earphone connection instructions 03 Turn it off 02 Charging in the charging

4、Earphone connection instructions 03 Turn it off 02 Charging in the charging compartment 7、Matters needing attention Note:
Left ear touch A.Singles-ear mode: take out a earphone. a.The white light will flash when it's charging, and the light will stay on after

J5 Ear Phones
fully charged. This equipment has been tested and found to comply with the limits for a Class
B.Binaural mode: first turn off the BT device and take out the Please make sure the product is fully charged before the first use;Or charge it first.
x1 B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
earphone. Touch (L) left ear 2 times and wait for 3-5 seconds, when both
8
2
Please use a brand charger or computer USB to charge the headset (note: 5V-1A charger). provide reasonable protection against harmful interference in a residential installation.
3 earphones flash blue lights, the match is successful(Please refer to the This equipment generates, uses and can radiate radio frequency energy and, if not
7 x2 index below for specific operations ）
Stay away from WIFI and routers and other high frequency transmitting devices,
which may affect the signal reception of the unit and cause the phenomenon of installed and used in accordance with the instructions, may cause harmful interference

01
sound blocking and disconnection. to radio communications.
x3 Headset pairing
L R

4 a.Put it in the charging compartment and b.No work for 5 minutes, c.Long press for about 5 Please use the product in an effective environment (15m) and there should be However, there is no guarantee that interference will not occur in a particular
1
no physical barriers (such as walls, etc.) between the BT device and the headset.
L
turn it off (close the lid and the indicator sleep shutdown seconds to turn on/off the ear installation. If this equipment does cause harmful interference to radio or television
5 6 Long press light will turn off after 10 seconds) Type-C charging port Please refer to Item 4 when there is no sound on one side of the earphone and reception, which can be determined by turning the equipment off and on, the user is

6、The basic parameters

Slowly flashing blue lights in the pairing of two ears is not successful(headset connection instructions) pair and encouraged to try to correct the interference by one or more of the following
Press 2 seconds
5、Charging instructions
x2 both earphone are successful connect the headset again, and the product will work normally after reconnection! measures:
1 Earphone charging contact 4 Microphone 7 battery indicator
Reorient or relocate the receiving antenna.
L
01 *Warm tips*
Display red and blue lights
2 Multi-touch point 5 Left ear indicator 8 Type-C charging port Press 2 seconds are unsuccessful
Unilateral headset charging
Product name J5 Playing time 4-5hours Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
BT Frequency
3 Display light 6 Right ear indicator Transparency, noise,normal
5.2+EDR 2.4GHZ
which the receiver is connected.
reduction mode switch repeatedly Press 3 seconds a.Take out the earphones b.Touch twice and wait for 3-5 seconds to pair successfully b.Put the earphone into the char- Connection distance 15m Impedance 32Ω
(wait 1.5 seconds after entering a mode) Consult the dealer or an experienced radio/TV technician for help.
ging case, the green light of the
c.The second use, charging lid is opened, the headset automatically boot, automatic matching earphone pattern on the display Charging time about 1 hour Standby time 7-10days Please tear off the
Press 5 seconds
2、Packaging accessories 02
Warning: Changes or modifications to this unit not expressly approved by the part
screen flashes quickly 2 times protective film before use
Connection
OFF ON

(Note: flash quickly 2 times Input 5V-1A Battery capacity 50mah/500mah responsible for compliance could void the user’s authority to operate the equipment.
Right ear touch means the earphone is detected) Noise reduction
FCC Radiation Exposure Statement
a.Device connection: Open your phone or other device, search for "J5", and click Connect. Flashes slowly (Note: the breath- Talking time 3-4hours 33-38dB
① Charging case, earphones ② Charging cable ③ 2 pairs of ear-tips ④Certificate ⑤User manual depth
a.When the battery is low, the sound ing light indicates charging)
④ ⑤ b.The left and right earphones can be connected separately. prompts to charge. Thanks for buying our J5 TWS earphone which comes with wireless
① ② ③
stereo, left and right channel separation and HIFI sound functions. This equipment complied with FCC radiation exposure limits set forth for an

Safety warning
x1

User manual
uncontrolled environment. This equipment should be installed and operated with
d. When the headset is charging, And It can be used alone or in pairs. We welcome your suggestions and
minimum distance 0cm between the radiator & your body.
x2 the red light(breathing light) will
Please ensure that the product is not used or stored in high temperature or
comments on our products and services!

R
Manual flash slowly. When the headset is
humid environment to avoid affecting the product performance.
fully charged, it will stay on for 10
Certificate J5
x3
J5

c. After 20 seconds, the display will enter t seconds and the blue light will go Do not drop or drop the product from high altitude to avoid damage.
he dormant screen, the display will light up out (not light)
Available equipment Please contact manufacturer if there is any product problem, and don't
when the headset is fully charged, and the i
disassemble the product for repair.
con of the fully charged headset will light up
for 1 second and then go out