Switches - Float

Sump or Open Tank Style – Type FG

Catalog # UPC Code Type Description
9036FG Special Order Universal kit which includes Pumptrol Float Switches
switch, plastic center hole Class 9036
float, rod and attaching
hardware • Pedestal Style
9036FG30 Special Order Switch Contacts close on liquid rise Type FG30
only 2-pole NEMA 1 • Designed for liquid level
9049A60 Special Order Float Plastic center hole float control with electric
9049A61 Special Order Tubing 33.75 inch aluminum rod, motor operated pumps
2 float stop assemblies and either directly or through
attaching hardware
a magnetic starter
• Can also be used to
activate alarms in liquid
level control systems
Sump or Open Tank Style – Type DG, GG • Upward or downward
Force up to Force down Level movement of the
Catalog # UPC Code Type Description trip to Trip Position
lever arm of the Class
9036DG2: Special Order Switch Contacts close on 9 oz. 8 oz. n/a 9036 Type FG30 float
only liquid Rise
switch controls the
9036DG2R 7-85901-57643-3 Switch Contacts open on liquid rise; 9 oz. 8 oz. n/a
only universal float and rod kit ON and OFF positions
consists of 1-7" corresponding to the
9036GG2: Special Order Switch Contacts close on liquid rise; 33 (21) oz. 39 (27) oz. short, water level changes
only top tapped 304 stainless (long) required to turn the
steel float, 2-21/2'
pump or alarm on
9036GG2R: Special Order Switch Contacts open on liquid rise; 34 (21) oz. 40 (27) oz. short,
only brass rods with connector (long) and off
and 2-stop collars
•S
 ump or Open Tank
9049A6: Special Order Tapped- #304 SS float; 5' brass – – –
at-Top tubing and two stops Type DG, GG
• Double-pole rated
9049A6S Special Order Floats #304 SS float; 5' SS tubing – – –
and two stops • 2 HP @ 115 Vac and
9049A6C Special Order Center- #304 SS float; 5' brass – – – 3 HP @ 230 Vac
Hole tubing and four stops • Designed for automatic
9049A6CS Special Order Floats #304 SS float; 5' SS tubing – – – control of liquid level in
and four stops open sumps or tanks
9049T1 Special Order Additional 21/2' brass tubing with – – – handling small motor
Tubing connector
loads directly or through
9049T1S Special Order Additional 2.5 foot SS tubing with – – – a starter
Tubing connector
• NEMA Type 1
Indoor Enclosure
• Type GG – heavier duty
for light commercial and
industrial applications

Item may require additional

:

9036DG2 9036GG2 9036FG lead time.

Have questions? Get answers! Visit Pumptrol's website at www.pumptrol.com 47

 Switches - Float
Closed Tank – Screw-in Style – Type HG
Approx. Water Level
Change (Field Adjustable)
Float Float Rod Pumptrol Float Switches
Catalog # UPC Code Description Positions Angle Minimum Maximum
Class 9037
9037HG33: Special Order Contacts close on liquid rise Right 45º offset 2" 5"
• Closed Tank-Type HG
9037HG32 Special Order Left 90º offset 2" 111/2" • NEMA Type 1 Indoor
9037HG31 Special Order Contacts close on liquid rise Right 90º offset 2" 111/2" Enclosure
9037HG30 Special Order Left 90º offset 2" 81/4" • Double-pole rated
• 2 HP @ 115 Vac and
3 HP @ 230 Vac
• Type HG switch is
Closed Tank – Flange Mount Style – Type EG
attached to tank
Post by means of 21/2"
Catalog # UPC Code Description Length
screw connection
9037EG8 Special Order For minimum water level change 25/8"
• Switches come
9037EG9 Special Order For maximum water level change 25/8" complete with stainless
steel float and rod
• Buna N Quad-Ring®
seal is used between
the float rod and
A
sealing connector
1.0
25 • Can withstand tank
L 1.81
46 3.625 pressures up to 50
92 PSIG at temperatures
4.5 up to 220˚F
R
114 F
H
• Closed Tank-Type EG
• NEMA Type 1 Indoor
Enclosure
• Double-pole rated
• 2 HP @ 115 Vac
3 HP @ 230Vac
Bushing 2.0 Across • Switches are flange
H 51 Flats
mounted and float
CL movement is
R transmitted through a
f2
3.86 CL
98
stuffing box
CL F
7.13 • Can be built up to meet
f1 16.06 184
408 exact requirements from
2.88 11.5 the basic switch, float
9037EG 73 292
rod and float groups
5.98
152
2.58
• Switch may be
65 assembled in the field to
2.5" NPT
0.38 give contacts that open
10 0.44 on liquid rise or close on
11
liquid rise
:
Item may require additional
lead time.
s
Viewed from front of switch
facing indicator scale.
QUAD-RING® is a registered
trademark of Minnesota
Rubber Co.
VITON® is a registered
9037HG
trademark of DuPont Co.

48 Have questions? Get answers! Visit Pumptrol's website at www.pumptrol.com

 Switches – Pressure
Cut-In Cut-Out Pressure
Setting Setting Connection
Catalog # UPC Code (PSIG) (PSIG) (NPSF Internal) Additional Features*

Water Pump Pressure Switches – Type FSG*

Standard Action: Contacts Open On Rising Pressure; 2-Pole, NEMA 1
FSG2J20BP 0-47569-11533-2 20 40 1/4"
FSG2J20CP 0-47569-00632-6 20 40 1/4"
FSG2J20PBP 0-47569-11534-9 20 40 1/4" Pulsation plug
FSG2J20PCP 0-47569-52171-3 20 40 1/4" Pulsation plug Class 9013 Type FSG
FSG2J20M1BP 0-47569-11535-6 20 40 1/4" Manual cut-in lever
FSG2J20M1CP 0-47569-80786-2 20 40 1/4" Manual cut-in lever
FSG2J20M4BP 0-47569-11536-3 20 40 1/4" Low pressure cut-off
FSG2J20M4CP 0-47569-80787-9 20 40 1/4" Low pressure cut-off
FSG2J18CP Special Order 20 50 1/4"
FSG2J21BP 0-47569-11538-7 30 50 1/4"
FSG2J21CP 0-47569-80785-5 30 50 1/4"
FSG2J21M1BP 0-47569-11539-4 30 50 1/4" Manual cut-in lever
FSG2J21M1CP 0-47569-04397-0 30 50 1/4" Manual cut-in lever
FSG2J21M4BP 0-47569-11540-0 30 50 1/4" Low pressure cut-off Single-phase electrical ratings
FSG2J21M4CP 0-47569-03466-4 30 50 1/4" Low pressure cut-off • FSG:
1.5 HP @ 115 Vac
FSG2J24BP 0-47569-11541-7 40 60 1/4" 2 HP @ 230 Vac
FSG2J24CP 0-47569-07217-8 40 60 1/4" • FRG:
1 HP @ 115 Vac
FSG2J24M4BP 0-47569-11542-4 40 60 1/4" Low pressure cut-off 1 HP @ 230 Vac
FSG2J24M4CP 0-47569-17782-8 40 60 1/4" Low pressure cut-off • FYG:
2 HP @ 115 Vac
Water Pump Pressure Switches – Type FRG** 3 HP @ 230 Vac
Reverse Action: Contacts Open On Falling Pressure; 2-Pole, NEMA 1 • FHG:
1.5 HP @ 115 Vac
9013FRG22J36 Special Order 10 5 1/4"
2 HP @ 230 Vac
9013FRG22J19 Special Order 22 16 1/4" • GSG, GHG
2 HP @ 115 Vac
9013FRG2J23 Special Order 40 20 1/4" 3 HP @ 230 Vac
9013FRG2J23M3 Special Order 40 20 1/4" Momentary manual cut-in 5 HP @ 460/575 Vac
lever (AUTO-START)
Additional features defined
9013FRG2J23M5 Special Order 40 20 1/4" Maintained manual cut-in • Maintained manual cut-out
lever (AUTO-ON) lever has two positions:
AUTO–switch operates on
9013FRG2J35 Special Order 50 30 1/4"
rising and falling pressure­;
Water Pump Pressure Switches – Type FYG*** and OFF – contacts are
Standard Action: Contacts Open On Rising Pressure; 2-Pole, NEMA 1 with higher HP held in the open or
off position.
9013FYG2J20 Special Order 20 40 1/4" • Low pressure cut-off
9013FYG2J21 Special Order 30 50 1/4" operates at approximately
10 PSIG below the cut-in
9013FYG2J24 Special Order 40 60 1/4" setting to stop the pump in
9013FYG2J33 Special Order 50 70 1/4" the event it runs dry or a
line breaks.
9013FYG2J25 Special Order 60 80 1/4" • Pulsation plug enables
the switch to operate on
*FSG2 – 20-65 PSIG Cut-in Range, 10-45 PSIG Cut-out Range, 15-30 PSIG Approx. Adjustable Differentials
reciprocating pump without
**FRG2 – 23-65 PSIG Cut-in Range, 8-45 PSIG Cut-out Range, 15-30 PSIG Approx. Adjustable Differentials responding to the pressure
**FRG22 – 10-45 PSIG Cut-in Range, 6-20 PSIG Cut-out Range, 4-25 PSIG Approx. Adjustable Differentials spikes at the end of each
***9013FYG2 – 25-80 PSIG Cut-in Range, 5-60 PSIG Cut-out Range, 20-30 PSIG Approx. Adjustable Differentials piston stroke.
• 2-way pressure relief valve
releases head pressure
on the compressor upon
cut-off of the switch.
• CP – clamshell package
BP – box packaging.
s
Differential – the difference
between cut-in and
cut-out pressure.

50 Have questions? Get answers! Visit Pumptrol's website at www.pumptrol.com

 Pumptrol Water Pump and
Cut-Out Air Compressor Pressure
Setting Pressure Connection
Catalog # UPC Code (PSIG) (NPSF Internal) Additional Features* Switches Class 9013
Schneider Electric’s Square
Air Compressor Pressure Switches – Type FHG*
Standard Action: Contacts Open On Rising Pressure; 2-Pole, NEMA 1 D brand of pressure switches
FHG2J27BP 0-47569-11543-1 100 1/4" have set the standard for
reliability, efficiency and
FHG2J27CP 0-47569-17822-1 100 1/4"
durability. As the most
FHG2J27XCP 0-47569-17823-8 100 1/4" 2-way pressure relief
trusted brand in residential,
FHG12J52XBP 0-47569-11545-5 125 1/4" 2-way pressure relief commercial and industrial
FHG12J52XCP 0-47569-17824-5 125 1/4" 2-way pressure relief pumping applications,
FHG12J55BP Special Order 150 1/4" Square D pressure switches
FHG12J55CP 0-47569-17825-2 150 1/4" continue to meet the daily
FHG12J55XBP 0-47569-11547-9 150 1/4" 2-way pressure relief needs of the water
systems industry.
FHG12J55XCP 0-47569-17826-9 150 1/4" 2-way pressure relief
High reliability
9013FHG42J59 Special Order 175 1/4"
• Rugged, robust
9013FHG42J59X Special Order 175 1/4" construction provides
9013FHG49J59 Special Order 175 1/4" NPT External a long life and provides
9013FHG49J59X Special Order 175 1/4" NPT External 2-way pressure relief years of uninterrupted,
Air Compressor Water Pump Pressure Switches – Type GHG, GSG** worry-free service
Standard Action: Contacts Open On Rising Pressure; 2-Pole, NEMA 1 • Feature drift proof cut-in
9013GSG2J20 Special Order 40 1/4" and cut-out settings
9013GSG2J21 Special Order 50 1/4" • Has visible vertical
contacts, easy to inspect
9013GSG2J24 Special Order 60 1/4"
without removal
9013GSG2J25 Special Order 80 1/4"
• Extra wide diaphragm
9013GHG2J25 Special Order 80 1/4" orifice reduces clogging
9013GHG2J29 Special Order 100 1/4" • An extra strong frame
9013GHG2J30 Special Order 100 1/4" that resists distortion
9013GHG2J53 Special Order 125 1/4" when mounting the
9013GHG2J63 Special Order 175 1/4" switch to a pipe or
compressor
9013GHG2J30X Special Order 100 1/4" 2-way pressure relief
• Designed for the direct
9013GHG2J53X Special Order 125 1/4" 2-way pressure relief
control of motors in
9013GHG2J63X Special Order 175 1/4" 2-way pressure relief pump and compressor
*FHG2 – 40-100 PSIG Cut-out Range, 20 PSIG Approx. Adjustable Differentials applications. Water
*FHG12 – 70-150 PSIG Cut-out Range, 30 PSIG Approx. Adjustable Differentials pump switches suitable
*FHG49 – 100-200 PSIG Cut-out Range, 40 PSIG Approx. Adjustable Differentials
for all types of pumps:
**9013GSG2 – 5-60 PSIG Cut-out Setting, 20-80 PSIG Cut-out Range,
15-30 PSIG Approx. Adjustable Differentials jets, submersible,
**9013GHG2 – 4 0-170 PSIG Cut-out Setting, 65-200 PSIG Cut-out Range, reciprocating, etc.
20-40 PSIG Approx. Adjustable Differentials • Diaphragm actuated
Models
• Type FSG is the standard
water pump switch
• Type FYG is designed
to meet higher
horse-power and
pressure requirements
• Type FRG is
reverse acting
• Type FHG for
air compressors
• Type G for higher
electrical ratings
Class 9013 Type GHG Class 9013 Type FHG
(water pumps and
air compressors)
Have questions? Get answers! Visit Pumptrol's website at www.pumptrol.com 51