®ÂØÒňΠ®

Workshop

JUNO-G Workstation Keyboard

Using the JUNO-G with a Computer

© 2009 Roland Corporation U.S.

All rights reserved. No part of this publication may be reproduced in any form without the
written permission of Roland Corporation U.S.

JGWS02
1

Downloaded from www.Manualslib.com manuals search engine

 About the Workshop Booklets Hot Links
Each Workshop booklet is meant to be read in order from beginning
Roland’s JUNO synthesizers have been making history since the 1980s.
to end. However, if we mention an upcoming section—and you see
They’ve always been affordable, easy to use, and sounded great onstage
this arrow—you can click the arrow to jump there immediately.
and in the studio. The JUNO-G carries on the family tradition in the most
modern way, with 128-note polyphony and killer sounds derived from
Roland’s acclaimed Fantom-X synths—even more sounds are available when Things You Can Do with Your MIDI Connection
you install an optional SRX-series sound expansion board. The JUNO-G has
a user-friendly 16-track sequencer, 4-track audio recorder, and a full-on
In this booklet, we’re going to assume you know how to operate your
sampler that give you the tools you need to bring your songs to life. A
computer. If you don’t, consult its documentation before proceeding.
USB jack allows you to easily exchange data with—or edit JUNO-G sounds
from—a personal computer. And it’s all tied together with a look and feel
that’s both familiar and intuitive. Edit and Create JUNO-G Sounds
This JUNO-G Workshop Series booklet is intended as a companion to the The JUNO-G ships with Editor and Librarian software for Mac and PC
JUNO-G Owner’s Manual. It requires JUNO-G Operating System v2.0 or higher. that makes the JUNO-G even more powerful. The Editor software allows
You can download the latest JUNO-G O.S. for free from www.RolandUS.com. you to edit factory sounds, or create your own, on your computer. The
Librarian software helps you organize and store your JUNO-G sounds and
About This Booklet performances on your computer’s hard drive.

The JUNO-G can exchange MIDI data with a Mac or PC via USB, letting you
use the JUNO-G as MIDI controller for a DAW and/or as a multitimbral sound
module. It also allows you to create JUNO-G sounds on your computer. This Current settings... ...go to the JUNO-G.
booklet explains how to get connected.

U U
Understanding the Symbols in This Booklet S S
B B
Throughout this booklet, you’ll come across information that deserves
special attention—that’s why it’s labeled with one of the following symbols. ...are sent to the software. Your edited settings...

A note is something that adds information about the topic at hand.

A tip offers suggestions for using the feature being discussed.

The Editor and Librarian come with their own documentation, so we’re
Warnings contain important information that can help you avoid
just going to discuss their installation in this booklet.
possible damage to your equipment, your data, or yourself.

Downloaded from www.Manualslib.com manuals search engine

 Use the JUNO-G with a DAW
You can use a GM2 System On message contained in an SMF file to
select the JUNO-G’s General MIDI 2 sounds, or you can press the
JUNO-G’s PERFORM button and select PRST 064 GM2 Template.
MIDI notes... ...where they play notes.

Setting Up Your Computer for the JUNO-G

U U
S S
B B
Installing the JUNO-G Software on Your Computer
...are captured in the DAW. Notes go to JUNO-STAGE... The JUNO-G works with the following operating systems:
• Windows XP™ • Windows Vista 32-bit Edition™ • Mac OS X™

In this booklet we’ll describe the Windows XP, Vista, and Mac OS X installation
of the JUNO-G’s USB MIDI driver, Editor and Librarian software.

The JUNO-G makes an excellent MIDI controller for a DAW. By plugging The JUNO-G must be ready to boot up into USB MIDI mode in order to
earbuds or headphones into your computer, you can use a DAW’s soft install its driver. See “Selecting the USB Operating Mode” on Page 167
synths; plugging them into the JUNO-G lets you use JUNO-G sounds. In a of the Owner’s Manual to learn how to set up the JUNO-G to do so.
more complex setup, you can listen to both through an audio interface.
When you connect the JUNO-G to your computer via USB, you’ll
Play General MIDI2 SMFs from a Computer typically get the best results using USB jacks on the back of a desktop
computer or on the side of a laptop. We recommend not using a hub.
If you have a
program on your
The JUNO-G’s software is on the CD-ROM that came with it. If you’re using
computer that
plays General MIDI • Windows XP—you’ll find the driver in the Win2kXP folder at the
or General MIDI2 CD-ROM’s root level. The Editor installer (which includes the Librarian
SMFs (“Standard software) can be found in the root level’s Installer folder.
MIDI Files”), you • Vista—you’ll find the driver Setup executable file and the Editor installer
can play them (which includes the Librarian software) in the Install folder at the
using the CD-ROM’s root level.
U
JUNO-G’s built-in S
GM2 sounds. B • Mac OS X—you’ll find the driver installer, and the Editor/Librarian
installer in their folders at the root level of the CD-ROM.

You can find the latest JUNO-G software on the Downloads tab at http://
www.rolandus.com/products/productdetails.php?ProductId=756.

Downloaded from www.Manualslib.com manuals search engine

 Windows XP
If you see the Software Installation window instead of
the one shown above, click Continue Anyway. If you can’t
Installing the JUNO-G USB MIDI Driver continue, see “About Driver Signing Options” later in this
1 Power up your PC with all USB cables disconnected except for your booklet. (You can click this button to jump there now.)
keyboard and mouse. If any applications are running, quit them.
2 Double-click the Setup file in the XP Drivers folder, or the installer 4 Click Next—the driver is installed and instructions appear telling you
you’ve downloaded and unzipped, to start the installer. what to do next.

We’ll take you through these instructions in this booklet, so you can
close this window, or drag it over to the side of the screen if you want
If XP asks if you want to run this file, click Run. If an “Install Program
to keep it open.
as Other User” dialog appears, quit the installer, and then log in as the
system administrator before re-launching the Setup application. 5 With the JUNO-G’s power turned off, plug one end of the included
USB cable into its USB jack, and the other end into the USB jack you
3 Click Next to display the installation start window: want to use on your computer.
6 Turn on the JUNO-G—after a few moments, the PC’s Found New
Hardware Wizard window appears, as shown in the following
screenshot.

If, instead of seeing the Found New Hardware window, you’re asked if
you want to connect to Windows Update, select No, not this time, and
then click Next to display the Found New Hardware window.

Downloaded from www.Manualslib.com manuals search engine

 About Driver Signing Options
The Driver Signing window lets you select whether Windows should block
the installation of an unknown driver, warn you about it, or just install it.
1 In the Start menu, select Control Panel.
2 If you’re in
• Category View—click Performance and Maintenance, and then
click System.
• Classic View—double-click System.

7 Click the button to the left of “Install the software automatically

(Recommended),” and then click Next to install the driver.
When the driver’s installed, the wizard announces the completion of
the installation process.

If the “Software installation” window appears after you click Next,

click Continue Anyway. If you can’t continue, see “About Driver Signing
Options” to the right of this page.

If the “System Settings Change” window appears, click Yes to restart

Windows.
3 Click the Hardware tab, and then click Driver Signing.
8 Click Finish. 4 Set “What action do you want Windows to take?” to Ignore or Warn.
Windows displays “Your new hardware is ready to use.” 5 Click OK to close the Driver Signing window.
9 If the Driver Setup window’s still open, click its Close button.
10 Restart your computer.

Should you ever need to remove the JUNO-G driver from your system,
its installer folder contains an uninstaller. You can hold onto this file,
or re-download the driver folder later should you need it.

Later in this booklet, we’ll provide some further information

on using the JUNO-G with a DAW. Click the button here to
6 Click OK to close the System Properties window.
jump to this section now if you like.
7 Return to the driver installation instructions earlier in this booklet.
5

Downloaded from www.Manualslib.com manuals search engine

 Installing the Editor/Librarian Software 6 Highlight the Custom installation, and then click Next.

You can install both the JUNO-G Editor and Librarian software in a single
operation. Here’s how to do this.

1 Double-click the JUNO-G Editor Setup executable file.

The installer opens. (If XP asks if you want to run this
file, click Run.)
2 Choose your setup language and click Next.

7 Checkmark all of the files in the Select Features window—if they’re

not already checked—and then click Next.

If you want to install only one of the JUNO-G programs, make sure its
files are all that’s checked in this window.

8 The installer displays your installation selections and tells you it’s now
ready to install the JUNO-G software. Click Next to proceed—the files
3 Enter your name and decide whether to install the driver only for the
are installed.
current user of your computer, or for all users, and then click Next.
9 Click Finish to exit the installer.
4 Read the License Agreement, and if you’d like to proceed with the
installation, click Yes.
Vista
5 In the Choose Destination Location window, you can select a location
on your hard drive for the JUNO-G software—if you don’t have a
specific reason to change it, leave the default location as it is—and Installing the JUNO-G USB MIDI Driver
then click Next to display the Setup Type window. 1 Power up your PC with all USB cables disconnected except for your
keyboard and mouse. If any applications are running, quit them.
2 Double-click the Setup file in the Vista Drivers folder, or the installer
you’ve downloaded and unzipped, to start the installer.

If Vista tells you a program needs your permission to continue, click

Continue.

Downloaded from www.Manualslib.com manuals search engine

 3 The Driver Setup window appears:

We’ll take you through these instructions in this booklet, so you can
close this window.
4 Click Next to display the Driver Setup instructions window:
7 With the JUNO-G’s power turned off, plug one end of the included
USB cable into its USB jack, and the other end into the USB jack you
want to use on your computer.
8 Turn on the JUNO-G—after a few moments, “Installing device driver
software” appears in the lower right corner of the screen.
9 When the PC’s finished installing the driver, “JUNO Series Device
driver software installed successfully” appears onscreen.
10 Restart your computer.

5 Click Next. Later in this booklet, we’ll provide some further information
on using the JUNO-G with a DAW. Click the button here to
jump to this section now if you like.

Installing the Editor and Librarian Software

Here’s how to install the JUNO-G Editor and Librarian software.

1 Double-click the JUNO-G Editor Setup executable file.

6 If Windows Security asks if you’d like to install this device software—
The installer opens.
as shown above—click Install.

If Vista tells you a program needs your permission to continue or that

If you plan to instal other Roland drivers in the future, you can check
it doesn’t recognize the program, click Continue.
Always trust software from “Roland Coporation” to save time later.

2 Choose English as your setup language and click OK.

The driver’s installed, and a window opens with instructions.

Downloaded from www.Manualslib.com manuals search engine

 Mac OS X

Installing the JUNO-G USB MIDI Driver

The JUNO-G USB MIDI driver is compatible with Mac OS X 10.3.9 and
higher and any Mac with an Intel processor or PowerPC G4 or G5.

1 Disconnect all USB cables from your computer except for your
keyboard and mouse.
3 Click Next, read the License Agreement, and if you’d like to proceed, 2 Double-click the JUNOGUSBDriver.pkg file from your CD-ROM or that
click Yes. you’ve downloaded and de-compressed.
4 Enter your name and decide whether to install the driver only for the 3 If the installer says it needs to run a program to determine if the
current user of your computer, or for all users, and then click Next. driver can be installed, click Continue.
5 Unless you have a reason to choose a different location, leave the
Choose Destination Location window set as it is and click Next.
6 Highlight the Custom installation, and then click Next.

The Roland driver installer window appears.

7 Checkmark all of the files in the Select Features window—if they’re

not already checked—and then click Next.

If you want to install only one of the JUNO-G programs, make sure its 4 Click Continue to display the Installation Type window, shown on the
files are all that’s checked in this window. next page.

8 When the installer displays your installation selections, click Next to

proceed—in a few moments, the files are installed.
9 Click Finish to exit the installer.

Downloaded from www.Manualslib.com manuals search engine

 We recommend using the default install location unless you’ve got If your Mac displays a message about reboot caches, click OK.
a specific reason for not doing so. If you do, click Change Install
Location... and then choose the location you want.
When the Mac’s restarted, make sure the JUNO-G’s power is turned
off. Then plug one end of your USB cable into the JUNO-G’s rear-panel
If your Mac has more than a single hard drive or volume, you may be USB jack, plug the other end into the USB jack you want to use on your
asked to select the drive on which you want to install the driver. Select computer, and turn on the JUNO-G.
the drive with your active operating system on it.

5 Click Install to display the password authentication window. Most Whenever you perform Mac OS X system updates, please disconnect
likely, your user name will already be filled in. the JUNO-G during the process to avoid having to reinstall the
JUNO-G USB MIDI driver.

In the same folder as the JUNOGUSBDriver.pkg file you’ll find the

JUNOG_Uninstaller. You can hold onto this file, or re-download the
driver folder later should you need it.

6 Type an administrator password for your computer.

Later in this booklet, we’ll provide some further information
7 Click OK—the installer informs you that a restart of your computer
on using the JUNO-G with a DAW. Click the button here to
will be required after the driver’s installed.
jump to this section now if you like.

8 Click Continue Installation to install the JUNO-G USB MIDI driver.

9 When you see the Install Succeeded window, click Restart.
9

Downloaded from www.Manualslib.com manuals search engine

 Installing the Editor and Librarian Software About Using the JUNO-G with a DAW
1 Double-click the JUNO-G Editor/Librarian Installer—the Software
License Agreement window appears. Setting Up MIDI Communication
2 After reading the license agreement, click Accept. (If you want to
print the agreement for your reference, click Print....) Using the JUNO-G as a DAW MIDI Controller Only
A Read Me window appears telling you that The JUNO-G makes an excellent MIDI controller for sequencing in a DAW.
• if you have an earlier version of the software installed—you’ll have Here’s how to get your JUNO-G ready for this.
to remove it before performing the installation.
• you should quit all other applications that are currently running— Going Modal
before proceeding.
When you’re sequencing with a DAW, it’s most common to send MIDI data
3 When you’re ready to proceed, click Continue to display the installer. on a single MIDI channel at a time. Press the PATCH button to enter Patch
mode and display the PATCH PLAY screen.

If your DAW can capture data on multiple MIDI channels simultaneously,

you can use the JUNO-G’s Performance mode to send MIDI data on
multiple MIDI channels, either at the same time of from different areas
We recommend leaving the installer set to Easy Install, and the Install
of the keyboard. See Page 63 in the Owner’s Manual to learn about
Location as it is unless you have some specific reason to change either
constructing performances.
setting.

4 Click Install—the Editor/Librarian software is installed. Local Off

5 When the installation’s complete, click Quit to exit the installer.
The JUNO-G has a “local off” switch that sets whether the JUNO-G plays its
current patch. When you’re sequencing you’ll want to set this switch to Off
The programs you’ve installed can be found in the Roland folder within so notes you play go only to the DAW. This is because
your Applications folder, presuming you didn’t change their destination • you don’t want to hear doubled notes—when a DAW track’s MIDI output
location during installation. is being sent back to the JUNO-G, each note would sound once when
you struck a key, and then again when the data had passed through the
DAW and back to the JUNO-G (this is called a “MIDI loop”).
• you want to hear what you’re actually sequencing—when you’re
sequencing with DAW soft synths. If you’re also hearing a JUNO-G
sound as you sequence, what you hear will not be not so much what
you get.
10

Downloaded from www.Manualslib.com manuals search engine

 When you’re not sequencing and you’re controlling external MIDI
sound modules—perhaps onstage, you may want to turn Local Sw on to
combine JUNO-G sounds with those from your external modules.
2 Press the ENTER button to display the System Menu at the bottom
To set the JUNO-G Local Sw for sequencing: of the display.

1 Press the MENU button to display the Top Menu window,

and select System in the menu.

3 Press F3 (MIDI) to display the MIDI General screen.

2 Press ENTER to show the System Menu at the bottom of the screen.

If you don’t see this screen, press F1 (GENERAL).

4 Set Local Switch to Off. (For an explanation of why you should do this,
3 Press F3 (MIDI) to display the MIDI General screen. see the “Local Off” section on Page 10.)

To avoid MIDI problems, we recommend also turning off the Remote

Keyboard Switch parameter on this screen as well as the Transmit
Program Change, Transmit Bank Select, and Soft Through parameters
If what you see doesn’t look like this, press F1 (GENERAL). on the MIDI TX screen—to display the MIDI TX screen, press F2 (TX).

4 Set Local Sw to Off, and then press F6 (WRITE) to save the setting.
5 Press F6 (WRITE) to save the change you’ve made.

MIDI Channel 6 Press the PERFORM button and select PRST 002 Seq: Template. This
performance sets up the JUNO-G for use as multitimbral sound
Most DAWs “re-channelize” the incoming data to the desired MIDI track, so module that can simultaneously play up to 16 of its sounds.
there’s seldom a need to match the JUNO-G’s transmit channel to the DAW’s
MIDI receiving channel. However, if you do need to do this, the MIDI General
screen is where you can see and set this by setting the Kbd Patch Rx/Tx
Channel parameter as desired.

In this performance, the 16 parts are lined up with the 16 MIDI

Using the JUNO-G as a Controller and Sound Module channels so that Parts 1-16 receive MIDI data on MIDI Channels 1-16,
respectively. Each DAW track sends out data on the MIDI channel
You can use the JUNO-G’s keyboard as a MIDI controller for a DAW whose
corresponding to the part that plays its sound, as shown on the next
tracks are playing JUNO-G sounds. Here’s how to set this up:
page.
1 Press the JUNO-G’s MENU button to display the Top Menu
window, and select System in the menu.
11

Downloaded from www.Manualslib.com manuals search engine

 2 Press F5 (PARTVIEW).
Piano MIDI Part 1—PRA:001 JUNO-G Grand
Channel 1

Bass MIDI Part 2—USER:024 Comp’d Bass

Channel 2

Drums MIDI Part 10—PRST:01 StandardKit1

Channel 10
If your screen doesn’t look like this, press F1 (PART).
DAW tracks JUNO-G performance parts
3 Select the part for which you want to select a sound by
The performance’s parts are also set to respond to various MIDI highlighting one of its parameters.
Program Change, Bank Select, and Control Change messages. All
of the parts are also set to default levels you can change with MIDI 4 Press the ENTER button to display the CATEGORY screen from
messages from the DAW. which you can select the sound you want the part to play.

To learn about MIDI Program Change, Bank Select, and Control Change
messages, see our An Introduction to MIDI InFocus booklet. To learn
how to work with them in your DAW, see your DAW’s documentation.

To learn about navigating the CATEGORY screen, see Page 5 of the

You’re now set up.
JUNO-Geography Workshop booklet.
7 As you sequence tracks, there’s nothing you need to do on the
JUNO-G other than play. Everything else takes place in the DAW.
5 Select the desired sound for the part and press ENTER to lock in
your choice.
About Selecting JUNO-G Sounds for Use with a DAW
6 Repeat Steps 3-5 to select the performance’s other sounds.

No matter how you decide to select JUNO-G sounds for use with a DAW,
• You can build the performance you want using the JUNO-G Editor—on
your computer, and then send it to the JUNO-G’s memory.
we recommend starting with PRST 002 Seq: Template.

When you’re playing JUNO-G sounds from a DAW, there are three ways to To preserve performances you create using either method, write them
select the sounds in the JUNO-G performance you use. into the JUNO-G’s memory. See Page 63 in the Owner’s Manual.

• You can create a performance with the desired sounds on the

JUNO-G—Here’s how: • The DAW tracks can select each part’s sound—by sending MIDI Bank
Select and Program Change messages to the JUNO-G on the part’s MIDI
1 Press the PERFORM button to display the PERF PLAY screen. channel.

12

Downloaded from www.Manualslib.com manuals search engine

 Configuring Your DAW for Use with the JUNO-G Sending Data from DAW Tracks to the JUNO-G

Once you’ve installed the JUNO-G driver and made your USB connection, All DAWs provide a method for directing sequenced MIDI data from
your software DAW can individual MIDI tracks to the desired external devices—for example, the
parts of a JUNO-G performance. Consult your DAW’s documentation to learn
• receive MIDI data from the JUNO-G—This allows you to play the DAW’s
how to direct the data on each of your DAW’s MIDI tracks to the desired
soft synths, and to sequence your playing onto DAW tracks.
JUNO-G parts.
• use the JUNO-G as a destination for outgoing MIDI data—This allows the
DAW to play the JUNO-G’s sounds from its tracks.
The End
While each DAW has its own way of doing things, the following general
principles always apply. (You can consult your software’s documentation for We hope you’ve found this workshop helpful. Keep an eye out for new
details.) JUNO-G updates and support documents you can download for free at
www.RolandUS.com.
Receiving JUNO-G MIDI Data in a DAW

To get your DAW to receive MIDI data from the JUNO-G, select the
JUNO-G as a MIDI input within the DAW, or set the DAW to receive all MIDI
data coming into the computer. If your DAW can accept MIDI data on all MIDI
channels—often referred to as “omni” mode—enable this option.

As we mentioned earlier, there’s seldom a need to match the DAW’s incoming

MIDI channel to the JUNO-G’s transmit channel. However, if you need to do
this, here’s how to figure out and/or set the JUNO-G’s MIDI transmit—shown
as “Tx” onscreen—channel.

If
• you’ve selected a performance on the JUNO-G so you can sequence using
multiple JUNO-G sounds—each of the performance’s parts transmits
on its same-numbered MIDI channel. From the PERFORM PLAY screen,
press F5 (PARTVIEW), shown on Page 12, and then use the 6 and 5
buttons to move from part to part. The JUNO-G will transmit MIDI data
on the currently selected part’s channel.
• you haven’t selected a performance on the JUNO-G—you can set the
system-wide Kbd Patch Rx/Tx Channel parameter to the desired
channel. To get to the parameter, follow the instructions on Page 11 of
this booklet to navigate to the MIDI General screen.

13

Downloaded from www.Manualslib.com manuals search engine