Version A - 06/20

Service Manual

EON 600 Series

Two-Way Multipurpose Self-Powered Sound Reinforcement
& Self-Powered Subwoofer
• EON610
• EON612
• EON615
• EON618S

1
 EON600 Series Service Manual
Version A - 06/20

Table of Contents

Safety Instructions

Datasheets and Specifications

Back Panel Overview

Troubleshooting

Block Diagrams

Schematics

Exploded View Diagrams

Bill of Materials

2
 EON600 Series Service Manual
Safety Instructions Version A - 06/20

Before You Begin - Important Information

Before using your EON® speaker system please review the following for important
information on safety and protection of your investment in quality loudspeakers.

1. Read these instructions.

2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Service Instruction in Owner's Manual: "CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE
PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO."
16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from
the AC receptacle.
17. "WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC - SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE."
18. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
19. The mains plug of the power supply cord shall remain readily operable.

3
Table of Contents
 EON600 Series Service Manual
EON610 Specifications Version A - 06/20

Features:
► JBL Premium Transducers
► 1000 W highly efficient Class-D amplification
► Maximum SPL Output: 124dB
► System Type: Self powered 10� two-way, bass-reflex
► Frequency Range (-l0dB): 52Hz- 20kHz
► Frequency Response (- 3dB): 60Hz- 20kHz
► Coverage Pattern: 110 x 60
► Bluetooth Control
• 3 Parametric EQs + Hi & Lo Shelf
• Gain and Delay
• Save and Recall settings
► ]BL Engineered Application Presets
• Main
• Monitor
• Speech
• Subwoofer
Specifications:
► 3 x M10 Suspension Points System:
► Standard 35mm pole cup with stabilizing screw System Type: Self powered IO", rwo-way, bass-reflex
► Lightweight, rugged polypropylene enclosure Maximum SPL Output: 124 dB
Frequency Range (-10 dB): 52Hz-20kHz

Applications: Frequency Response (-3 dB): 60Hz-20kHz

Amplifier:
System Power Rating: J000W Peak (700 LF + 300HF); 500W
► The EON610 is a powered portable PA speaker in the Continuous (350W LF + 150W HF)
EON600 series from JBL Professional. It has been Input Impedance: 20k (balanced)
designed to deliver class leading performance in a variety
Line Input Gain: Infinity to 26.8 dBu
of applications including use as a main PA, a stage monitor,
and rear and side fills. A lightweight, highly useful enclosure Mic Input Gain: Infinity to 29 dBu
allows the speaker to be easily transported and set up Maximum Input Level:
wherever sound reinforcement is needed. Line: +14dBu
Mic: -4dBu
► Enclosure designs have been optimized for ideal acoustic Connectors: 2 x Balanced XLR-1/4" combination inputs;
resonance taking advantage of injection molding techniques I x male XLR loop thru out
and mechanical shaping of the enclosures. This results in LED Indicators: Front Power LED (Defeatable, white) Rear Power LED (Blue),
tremendous increases in cabinet volumes which enable better Bluecooth (Blue), EQ+ (Green) Preset (Green) Signal (Green)
acoustic performance while maintaining the same footprint. Limit (Orange)
Four intelligently positioned handles make the 600 easy Cooling: Passive
to carry and move around. Integrated hardware mounts, AC Power Input: I00-120VAC 50/60Hz; 230-240VAC S0/60Hz
designed into the enclosures, allow each model to be flown AC Power Consumption (120V ~ ): I/8th Power-l.14A (Max), I/4th Power-1.71A (Max),
when required. And indexed feet molded into the enclosures I/3rd Power -2.03A (Max)
allow for convenient storage and transport, secure stacking Speaker:
for stage monitor and traditional stand up configurations,
LF Driver: I xJBL 6J0H 322mm (JO in) woofer
and unique acoustic configurations.
HF Driver: I xJBL 2414H-l 25.4mm ( I in) polymer diaphragm, neodymium
compression driver
► The EON610's extraordinary performance results from a
Coverage Pattern: 110 X 60
breakthrough approach to waveguide design. Special fluting
is designed into the structure that guides the frequencies Crossover Frequency: J.8kHz
through the full range of the system. The result is consistent Enclosure:
response throughout its ll 0 degree coverage pattern. Material: Polypropylene, black
The quality and consistency between on axis and off axis Monitor Angle: Both sides
response delivers uniform coverage and high intelligibility Suspension/Mounting: 35mm pole socket,
throughout the coverage area, which means the EON61O's 3 x MIO Suspension points
smooth, transparent sound is the same for the entire 4
Handles:
audience.
Grille: Powder coated, Obsidian, perforated steel with acoustically transparent
black cloth backing
► Bluerooth control over DSP Parameters, presets, and master
Dimensions (L x W x H): 558 mm x 322 mm x 295 mm
volume allows users to control up to 4 speakers at one (21.968" X 12.677" X JJ.6J4")
time with iOS and android devices. 3 PEQs and a Hi- and
Weight: 26 lbs (I1.79 kg)
Lo-shelf are built into the speaker and accessible via the
EON600app. Shipping Weight: 36.0 lbs (15 kg)

4
Table of Contents
 EON600 Series Service Manual
EON612 Specifications Version A - 06/20

Features:
► JBL Premium Transducers
► 1000 W highly efficient Class-D amplification
► Maximum SPL Output: 126dB
► System Type: Self powered 12� two-way, bass-reflex
► Frequency Range (-10dB): 48Hz - 20kHz
► Frequency Response (- 3dB): 57Hz - 20kHz
► Coverage Pattern: 100 x 60
► Bluetooth Control
• 3 Parametric EQs + Hi & Lo Shelf
• Gain and Delay
• Save and Recall settings
► JBL Engineered Application Presets
• Main
• Monitor
• Speech
• Subwoofer
Specifications:
► 3 x M 10 Suspension Points
System:
► Standard 35mm pole cup with stabilizing screw System Type: Self powered 12•, two-way, bass-reflex
► Lightweight, rugged polypropylene enclosure Maximum SPL Output: 126 dB
Frequency Range (-10 dB): 48Hz-20kHz

Applications: Amplifier:
Frequency Response (-3 dB): 57Hz-20kHz

System Power Rating: I000W Peak (700 LF + 300HF); S00W

► The EON612 is a powered portable PA speaker in che Continuous (350W LF + I SOW HF)
EON600 series from JBL Professional. Ic has been
Input Impedance: 20k (balanced)
desigoed co deliver class leading performance in a variety
Line Input Gain: Infinity to 26.8 dBu
of applications including use as a main PA, a stage monitor,
and rear and side fills. A lighcweighc, highly useful enclosure Mic Input Gain: Infinity to 29 dBu
allows the speaker co be easily transported and sec up Maximum Input Level:
wherever sound reinforcement is needed. Line: +14c1Bu
Mic: -4dBu
► Enclosure desigos have been optimized for ideal acoustic Connectors: 2 x Balanced XLR-1/4" combination inputs;
resonance caking advantage of injection molding techniques I x male XLR loop thru out
and mechanical shaping of the enclosures. This results in LED Indicators: Front Power LED (Defeatable, white) Rear Power LED (Blue),
tremendous increases in cabinet volumes which enable beccer Bluetooth (Blue), EQ+ (Green) Preset (Green) Signal (Green)
acoustic performance while maintaining the same footprint. Limit (Orange)
Four intelligently positioned handles make the 600 easy Cooling: Passive
co carry and move around. Integrated hardware mounts, AC Power Input: I00-120VAC S0/60Hz; 230-240VAC S0/60Hz
desigoed into the enclosures, allow each model co be flown AC Power Consumption (120V~ ): I/8th Power -1.14A (Max), I/4th Power -!.?IA (Max),
when required. And indexed feet molded into the enclosures I/3rd Power -2.03A (Max)
allow for convenient storage and transport, secure stacking
Speaker:
for stage monitor and traditional stand up configurations,
LF Driver: I xJBL 612H 380mm (12 in) woofer
and unique acoustic configurations.
HF Driver: I xJBL 2414H-l 25.4mm (I in) polymer diaphragm, neodymium
compression driver
► The EON612's extraordinary performance results from a
breakthrough approach co waveguide design. Special fluting Coverage Pattern: IIO x 60
is designed into the structure chat guides the frequencies Crossover Frequency: l.8kHz
through che full range of che system. The result is consistent Enclosure:
response throughout its 110 degree coverage pattern. Material: Polypropylene, black
The quality and consistency between on axis and off axis Monitor Angle: Both sides
response delivers uniform coverage and high incelligibilicy
Suspension/Mounting: 35mm pole socket,
throughout the coverage area, which means the EON612's 3 x M10 Suspension points
smooch, transparent sound is the same for the entire
Handles: 4
audience.
Grille: Powder coated, Obsidian, perforated steel with acoustically transparent
black cloth backing
► Bluecooch control over DSP Parameters, presets, and master
Dimensions (L x W x H): 664 mm x 380 mm x 316 mm
volume allows users co control up co 4 speakers ac one
(26.14" X ]4.96" X ]2.44")
time with iOS and android devices. 3 PEQs and a Hi- and
Weight: 33 lbs (19 kg)
Lo-shelf are built into the speaker and accessible via the
EON600app. Shipping Weight: 43.0 lbs (19 kg)

5
Table of Contents
 EON600 Series Service Manual
EON615 Specifications Version A - 06/20

Features:
► JBL Premium Transducers
► 1000 W highly efficient Class-D amplification
► Maximum SPL Output: 127dB
► System Type: Self powered 15� two-way, bass-reflex
► Frequency Range (-l0dB): 39Hz- 20kHz
► Frequency Response (- 3dB): S0Hz- 20kHz
► Coverage Pattern: 90 x 50
► Bluetooth Control
• 3 Parametric EQs + Hi & Lo Shelf
• Gain and Delay
• Save and Recall settings
► ]BL Engineered Application Presets
• Main
• Monitor
• Speech
• Subwoofer
Specifications:
► 3 x M 10 Suspension Points
System:
► Standard 35mm pole cup with stabilizing screw System Type: Self powered 15", two-way, bass-reflex
► Lightweight, rugged polypropylene enclosure Maximum SPL Output: 127 dB
Frequency Range (-IO dB): 39Hz-20kHz

Applications: Amplifier:
Frequency Response (-3 dB): 50Hz-20kHz

System Power Rating: I000W Peak (700 LF + 300HF); 500W

► The EON615 is a powered portable PA speaker in che Continuous (350W LF + 150W HF)
EON600 series from JBL Professional. le has been
Input Impedance: 20k (balanced)
designed co deliver class leading performance in a variety
Line Input Gain: Infinity to 26.8 dBu
of applications including use as a main PA, a stage monitor,
and rear and side fills. A lighcweighc, highly useful enclosure Mic Input Gain: Infinity to 29 dBu
allows the speaker co be easily transported and sec up Maximum Input Level:
wherever sound reinforcement is needed. Line: +14dBu
Mic: -4dBu
► Enclosure designs have been optimized for ideal acoustic Connectors: 2 x Balanced XLR-1/4" combination inputs;
resonance caking advantage of injection molding techniques I x male XLR loop thru our
and mechanical shaping of the enclosures. This results in LED Indicators: Front Power LED (Defeatable, white) Rear Power LED (Blue),
tremendous increases in cabinet volumes which enable better Bluerooth (Blue), EQ+ (Green) Preset (Green) Signal (Green)
acoustic performance while maintaining the same footprint. Limit (Orange)
Four intelligently positioned handles make the 600 easy Cooling: Passive
co carry and move around. Integrated hardware mounts, AC Power Input: I00-120VAC 50/60Hz; 230-240VAC 50/60Hz
designed into che enclosures, allow each model co be flown
AC Power Consumption (120V ~ ): I/8th Power-1.14A (Max), I/4th Power-1.71A (Max),
when required. And indexed feet molded into the enclosures I/3rd Power-2.03A (Max)
allow for convenient storage and transport, secure stacking
Speaker:
for stage monitor and traditional stand up configurations,
LF Driver: I xJBL 615H 380mm (15") woofer with 2" voice coil
and unique acoustic configurations.
HF Driver: I xJBL 24I4H-l 25.4mm (I in) polymer diaphragm, neodymium
compression driver
► The EON615's extraordinary performance results from a
breakthrough approach co waveguide design. Special fluting Coverage Pattern: 90 x 50
is designed into che structure chat guides the frequencies Crossover Frequency: i.SkHz
through che full range of che system. The result is consistent Enclosure:
response throughout its llO degree coverage pattern. Material: Polypropylene, black
The quality and consistency between on axis and off axis Monitor Angle: Both sides
response delivers uniform coverage and high incelligibilicy
Suspension/Mounting: 35mm pole socket,
throughout the coverage area, which means the EON61S's 3 x MIO Suspension points
smooch, transparent sound is the same for the entire
Handles: 4
audience.
Grille: Powder coated, Obsidian, perforated steel with acoustically transparent
black cloth backing
► Bluecooch control over DSP Parameters, presets, and master
Dimensions (L x W x H): 707mm x 439mm x 365mm
volume allows users co control up co 4 speakers at one
(27.8" X 17.3" X 14.4")
time with iOS and android devices. 3 PEQs and a Hi- and
Weight: 39 lbs (17.6 kg)
Lo-shelf are built into the speaker and accessible via the
EON600app. Shipping Weight: 49.0 lbs (22 kg)

6
Table of Contents
 EON600 Series Service Manual
EON618S Specifications Version A - 06/20

Features:
► JBL Premium Transducers
► 1000 W highly efficient Class-D amplification
► Maximum SPL Output: 134dB
► System Type: Self powered 18" Subwoofer
► Frequency Range (-10dB): 31Hz - 1SOHz
► Frequency Response (- 3dB): 42.SHz - lS 0Hz
► Bluetooth Control
• 3 Parametric EQs + Hi & Lo Shelf
• Gain and Delay
• Save and Recall settings
• Polarity Inversion
► ]BL Engineered Crossover Presets
• 80Hz
• lO0Hz
• 120Hz
• EON Specifications:
► M20 Pole Cup System:
System Type: Self powered 18" Subwoofer
► Rugged, stage-ready Duraflex enclosure
Maximum SPL Output: 134 dB
Frequency Range (-10 dB): 31Hz-150Hz
Frequency Response (-3 dB): 42.5Hz - l 50Hz

Applications: Amplifier:
System Power Rating: I000W Peak, 500W Continuous
► The EON618S is a powered portable PA subwoofer in Input Impedance: 22k (balanced)
the EON600 series from JBL Professional. It has been Line Input Gain: 0 to 36 dBu
designed to deliver class leading performance in a variety Mic Input Gain:
of applications supporting EON600 and other full range Maximum Input Level:
systems. A lightweight, highly useful enclosure allows the Line: +14dBu
speaker to be easily transported and set up wherever low
Mic:
frequency reinforcement is needed.
Connectors: 2 x Balanced XLR-1/4" combination inputs;
2 x male XLR loop thru out
► The EON618S enclosure has been designed to maximize
LED Indicators: Front Power LED (Defeatable, white) Rear Power LED (White),
cabinet volume while maintaing a highly transportable Bluetooth (Blue), EQ+ (Green) Preset (Green) Signal (Green) Limit
footprint. This has lead to extraordinary Low Frequency (Orange)
production, making the EON618S the loudest, lowest, Cooling: Passive
cleanest subwoofer in its class
AC Power Input: I00-120VAC 50/60Hz; 230-240VAC 50/60Hz
AC Power Consumption (120V~ ): I/8th Power- 1.14A (Max), I/4th Power- 1.71A (Max),
► Selectable crossover presets are available through the EON
I/3rd Power- 2.03A (Max)
Connect app. By default, the EON618S uses the "EON"
Speaker:
tuning, which is a I00 Hz crossover that has been specifically
tuned to compliment the full range EON600 speakers. LF Driver: I xJBL 618H 457mm (18") woofer with 2" voice coil
Generic 80Hz, I00Hz, and 120Hz tunings are also available HF Driver:
for use with other full range systems. Coverage Pattern:
Crossover Frequency: Selectable; 80 Hz, I00 hz, or 120 Hz
► Bluetooth control over DSP Parameters, presets, and master Enclosure:
volume allows users to control up to 4 speakers at one time
Material: Duraflex coated wooden enclosure
with iOS and android devices. Polarity inversion, 3 PEQs,
Monitor Angle:
and a Hi- and Lo-shelf are built into the speaker and
accessible via the EON Connect app. Suspension/Mounting: M20 Threaded Pole Cup
Handles: 2
Grille: Powder coated, Obsidian, perforated steel with acoustically transparent
black cloth backing
Dimensions (L x W x H): 582mm x 668mm x 645mm
(22.9" X 26.3" X 25.4")
Shipping Dimensions (L x W x H): 803mm x 768mm x 631mm
(31.6" X 30.2" X 25.1")
Weight: 78.2 lbs (35.5 kg)
Shipping Weight: 91.0 lbs (41.2 kg)

7
Table of Contents
 EON600 Series Service Manual
Back Panel Overview Version A - 06/20

Bluetooth Sync Power LED

Bluetooth Boot • Front LED On/Off

EQ Presets EQ+ On/Off

CH1 & CH2 Gain

Limit LED
Mic/Line Button
XLR-1 /4" Combo Inputs Master Volume
XLR Male Loop Thru

Power Switch •

8
Table of Contents
 EON600 Series Service Manual
Back Panel Overview Version A - 06/20

Signal Indicator
...-----------tlr!.a

.------� Master Volume

Limit LED
Bluetooth Sync Power LED
Bluetooth Indicator • Front LED On/Off
Bluetooth Boot
XLR-1/4"Combo Inputs
EQ+ On/Off
Polarity Switch XLR Male Loop Thru

Power Switch

9
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

10
Table of Contents
 EON600 Series Service Manual
Troubleshooting Version A - 06/20

Symptom Likely Cause What to do

Speaker not connected
Verify that speaker is connected and that the circuit is on
No sound to active AC power

Power not switched on Switch on power and verify that power LED is on

No sound, speaker is connected

Speaker power cable is faulty • Re-seat the power cable at both ends.
to working AC power but won’t
or improperly connected. • Substitute a known-good power cable
come on.

Signal source • Check VU meters on the source mixer

(mixer, instrument, etc.) • Verify that the tape or CD is playing.
is not sending. • Use headphones to verify that the instrument is actually
No sound. Speaker comes on. sending an audio signal

Faulty cables and • Disconnect and re-seat signal cables.

connections • Replace suspected cable with a known-good cable

No sound with microphone The EON does not supply phantom power. Switch to a dynamic
Microphone requires
connected directly to the microphone, use a battery powered microphone (if possible),
phantom power
MIC/ LINE input. use an external phantom power supply for condenser type microphones.

Signal sounds distorted and Excessive input signal, trying • Reduce the output level of the source.
very loud, PEAK light is lit to exceed the capabilities of • Turn down the level controls on the speaker.
most of the time. the speakers • Use additional EON speakers.

Review the Owner’s Manual for your mixer and adjust controls as needed.
Signal sounds distorted even at • Input sensitivity (gain)
Mixer or other source
moderate volumes, LIMIT light • Channel faders
is overdriven
is not lit. • Master faders Once this is done, review the instructions in the Quick
Start section of this guide.
• Make sure that the MIC/LINE switch is in the LINE (disengaged) position.
• Reduce the level settings at speaker. Review the Owner’s Manual for
Lots of hiss in the sound,
your mixer and adjust controls as needed.
the mixer controls are at Improper gain structure
• Input sensitivity (gain)
very low settings.
• Channel faders
• Master faders
Disconnect the devices that are connected to your speaker one at a time.
Noise or hiss heard at output. Noisy source device If the noise goes away, the problem is with the source or the
connecting cable.
Improper A/C ground or
Disconnect or mute channels one at a time to isolate the problem. Refer to
Hum or Buzz that increases or faulty equipment connected
the owner’s manual of the faulty equipment for troubleshooting help.
decreases when the mixer level to mixer input
controls are moved. Faulty cable between source
Substitute a known-good cable for the suspected faulty cable.
equipment and mixer

Improper A/C grounding, • ‘Lift’ the audio ground by using an XLR/F to XLR/M adapter on one end.
ground loops • Re-route audio cables away from AC power and lighting cables.

• Use the balanced outputs (if available) of your mixer or source

Excessively long equipment to drive your EON speakers.
Hum or Buzz
unbalanced cable run • Use a “DI” (direct injection) box to convert your unbalanced equipment
output to a balanced output.

Improper system gain Reduce the INPUT level controls and increase the output level of your
structure source devices.

11
Table of Contents
 EON600 Series Service Manual
Block Diagrams--EON600 Version A - 06/20

SIGNAL

DSP

HPF HF
CH1
EQ+ EQ LIM
MIC
LINE
LPF LF

LEVEL 1 MASTER
SIGNAL VOLUME LIMIT
MAIN
ON MONITOR
OFF SUB
SPEECH

CH2
MIC
LINE

LEVEL 2

THRU

EON610 EON612 EON615

12
Table of Contents
 EON600 Series Service Manual
Block Diagrams--EON600 SUB Version A - 06/20

SIGNAL

DSP

CH1 EQ
.,...,_ MIC
rl LINE
LEVEL 1
THRU MASTER
VOLUME
80Hz
ON 100Hz
OFF 120Hz
EON

CH2
.,...,_ MIC
rl LINE
LEVEL2
THRU

EON618S

13
Table of Contents
 EON600 Series Service Manual
Schematics Version A - 06/20

All unused 1/0 should be configured as

analog input and all decoupling caps should
be put as c1ose as possible to the micro

SWHCllf.S and LED Controls

\\1,.., U.111,; ITAG(B)close Jl open J2, ID large! oo,.-dno ffi'.G (ll). Jl and J2

JBL Professional

EON600

14
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

15
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

16
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

17
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

18
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

19
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

20
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

21
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

--EON600

22
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

23
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

24
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

25
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

26
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

27
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

28
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

SMPS--EON600SUB

29
Table of Contents
 EON600 Series Service Manual
Version A - 06/20

30
Table of Contents
 EON600 Series Service Manual
Exploded View Diagrams--EON610 Version A - 06/20

31
Table of Contents
 EON600 Series Service Manual
Exploded View Diagrams--EON612 Version A - 06/20

2 16
11 12 13 44
24 25 36 50 52
4 29

17
26 3

10 23 26 43 46 48 51

40

38

6 27

8 37

1 16 35 39 45
14 34 41 42 49
15 20 37

32
Table of Contents
 EON600 Series Service Manual
Exploded View Diagrams--EON615 Version A - 06/20

' \
3

00

33
Table of Contents
 EON600 Series Service Manual
Exploded View Diagrams--EON618S Version A - 06/20

36

34

35

34
Table of Contents

Table of Contents
 EON600 Series Service Manual
Bill of Materials - EON600 Series Version A - 06/20

For reference only, refer to SBOM to view and order spare parts
Bill of Materials
NO. Description Qty
1 REAR ENCLOSURE 1
2 BAFFLE 1
3 GRILLE 1
4 HANDLE, TOP/BOTTOM EON600 SERIES 2
5 SIDE FOOT LEFT 2
6 SIDE FOOT RIGHT 2
7 M/I, 2414H-1 1
8 SIDE HANDLE ASSEMBLY 2
9 LOGO SRX800 1
10 IC,AMPL 1
11 NUT, M14 FINE, CLR ZINC RH 3
12 FLY BOLT, EONG3 3
13 WASHER, M14,REG, CLR ZINC 3
14 FRONT LED LENS 1
15 MFD ITEM, WOOFER 1
16 GASKET, ENCLOSURE EON515 10.6
17 SCR,PT,M4x40mm PAN HD, TORX DRIVE BLK MAGNI577 12
18 PLASTIC BAG 1
19 QUICKSTART GUIDE, EON600 1
20 GASKET, WOOFER, AE 1
CBL,PCRD,AC,LINE,10A,230V,EON AU 1
POWER CORD CHINA,L=2M,3C 1
21 CBL,PCRD,AC,JAPAN,1m,0.75mm2,BLK 1
CORD, AC, LINE, CEE 7/7 (EUROPE) 1
CORD, AC, LINE, 120V, EON 1
22 Wire Harness w/Ferrite, EON615 1
23 ANTENNA, EON600 SERIES (NEW) 1
24 SCREW, AMPLIFIER & GRILLE, EON600 20
25 SCR,PT,M4x15mm washer head torx, BLK 8
26 SCR,PT,M4x22mm, WASHER HEAD, TORX,BLK MAGNI577 4
27 INNER CTN BEAUTY 1
28 SHIPPING CTN 1
29 TOP /BTM FILLER 2
30 SCR, 4 X 1/2,RND,PH,WOOD,CLR ZINC,LCS 2
31 TINNERMAN CLIP 4
32 CUP PLUG, EON500 1
33 FSTNR,BLT,PT,M5X28MM,PANHD TORXMAGNI577 12
34 ANTENNA HOLDER 1
35 DACRON (DANDONG) 5.6
36 COVER PLATE 1
37 EON600, LED-ANTENNA GASKET 1

35
Table of Contents
 EON600 Series Service Manual
Bill of Materials - EON600 Series Version A - 06/20

Bill of Materials
NO. Description Qty
38 FRONT LED ASSEMBLY, EON600 1
39 LINER, EON600 1
40 PERMANENT THREADLOCK, (RED) Loctite 2760 0.15
41 ADH,JET_MELT/3796-PG 0.03
42 GASKET, CLOCKING 1
43 FERRITE BEAD ANTENNA, EON615 1
44 ADH,TORQUE INDICATOR,BLU 5

36
Table of Contents