Britacel Silicones Ltd.
KRISOF LUB NG
Lubricant to reduce fibre to fibre and fibre to metal friction to reduce creasing, crowfeet
marks and chafe marks, especially suitable for sensitive fabrics and machines with ultra
low liquor ratios, also an efficient one bath scour-dye auxiliary for jet processing of
polyester
CHARACTERISTICS BENEFITS
No formation of permanent creases during
Lowers textile-to-textile friction wet finishing. Ropes open and displace
more easily, so improving levelness
Textiles run better and more dependably in
Reduces textile-to-metal friction
machines, no chafe marks or streaks
Higher utilization of jets, winches, paddle
Lowers the friction coefficient of the textile and drum-type dyeing machines.
material Improved quality of results in short-liquor
processing
Promotes opening of fabric ropes and Ensures no formation of permanent
displacement of folds or creases creases
Is highly effective at all temperatures and
Suitability for all dyeing methods
pH levels
No foam problems in jet dyeing machines,
Generates little foam
improved run of goods
PHYSICAL PROPERTIES
Chemical constitution: Blend of phosphate esters
Ionic character: Anionic
Physical form: Clear to Hazy liquid
pH (using pH paper stripe
E Merck 2.0 – 9.0): 5.5 - 8.5
Technical Data Sheet: KRISOF LUB NG Page 1 of 3
Britacel silicones Ltd.
F-18, F Block Road, MIDC Marol, Andheri (East), Mumbai – 400093
Tel: 0091 22 4009 4000, Fax: 0091 22 4009 4003
E-mail: bsl@britacelsilicones.com Website: www.britacelsilicones.com
Britacel Silicones Ltd.
Specific gravity at 25°C: 0.99-1.05
Genaral stability: Stable in hard water and to acids, alkalis and
electrolytes in the usual amounts encountered in
pre-treatment and dyeing
Compatibility: Compatible with most non-ionic and anionic
products
Storage stability: Stable for more than one year at 20°C in closed
containers. Product should not be stored at
temperatures above 40°C.
Ecology/Toxicology: The usual hygiene and safety rules for handling
chemicals should be observed in storage, handling
and use. The product must not be swallowed.
For further information on ecology and
toxicology, see relevant Safety Data Sheet
Application
Dissolving / diluting
KRISOF LUB NG can be diluted with cold or warm water in all proportions.
Required amount
This depends on the sensitivity of the textile material, type of machinery and the level of
loading. In general following dosages are recommended as a guide,
0.5 – 2g/l KRISOF LUB NG
As a jet scour-dye auxiliary for polyester
1 – 2g/l KRISOF LUB NG
Is added in the beginning and fabric run for 10 minutes at 50 - 60°C before adding
dispersant, pH buffer and disperse dyes. The oil and wax emulsifying property of
KRISOF LUB NG ensures level dyeing, free from spots, stains and creases without
carrying out a separate scouring process.
NOTES
If exposed to the atmospheric air for a prolonged period it may cause creaming which on
stirring dissolves completely. Product should be kept all the times in closed containers
away from direct sunlight
Technical Data Sheet: KRISOF LUB NG Page 2 of 3
Britacel silicones Ltd.
F-18, F Block Road, MIDC Marol, Andheri (East), Mumbai – 400093
Tel: 0091 22 4009 4000, Fax: 0091 22 4009 4003
E-mail: bsl@britacelsilicones.com Website: www.britacelsilicones.com
Britacel Silicones Ltd.
ATTENTION
The information given above is in line with our present state of knowledge and
experience and is without any guarantee. Users must thoroughly test any application
before any commercialization. We are not liable for damages due to improper application
of our products.
Technical Data Sheet: KRISOF LUB NG Page 3 of 3
Britacel silicones Ltd.
F-18, F Block Road, MIDC Marol, Andheri (East), Mumbai – 400093
Tel: 0091 22 4009 4000, Fax: 0091 22 4009 4003
E-mail: bsl@britacelsilicones.com Website: www.britacelsilicones.com
