Complete Loudspeaker Management System
PA+
C o m p l e t e L o u d s p e a k e r M a n a g e m e n t Sy s t e m
Product Overview
The best just got even better! The DriveRack PA, far and away the world’s most popular loud speaker management system
has now become the DriveRack PA+. Showcasing all the features that users around the world have come to expect, includ-
ing easy set up, rock-solid reliability and unparalleled sound quality, the new version has gone to great lengths to earn its
“plus.” With more settings, more control and enhanced circuitry, the sound you seek is right at your fingertips.
Although the DriveRack PA+ is loaded with functions and features, it is easy to set up and use. The dbx exclusive Set
Up Wizard walks you through system set up with easy to follow step-by-step instructions. Just pick your speakers and
amps from the built-in list on the PA+ and then let the Auto Level™ Wizard fine tune the level settings of each speaker.
You can then let the Auto EQ™ Wizard help you further optimize your sound. Finish up by using the AFS® Wizard, which
automatically sets filters to eliminate any feedback during performances. Within minutes, your system will sound like it
was tuned by a pro. No experience required! Get the most out of your PA with the DriveRack PA+, the worldwide standard
in loudspeaker management.
Features
< Setup Wizard Steps Through Speaker and < USB Firmware and Speaker Tunings Field < 2x3, 2x4, 2x5, 2x6 Crossover Configurations
Amp Selection and Levels Updatable With Harman HiQnet™ System < Dual 28-band Graphic EQ- Linked or Dual
< Auto EQ™ Wizard with 28-Band RTA Tunes Architect Mono
Your System For The Venue < Full time RTA function < Stereo Multi-band Parametric EQ
< Auto Level™ Wizard Balances Your System < Front-Panel Output Mutes < Stereo Output Limiters
< AFS® Wizard Helps Eliminate Feedback < Pink Noise Generator (used with Auto EQ < Output Alignment Delay
< Stereo Feedback Elimination with 12 feed- and Auto Level Wizards) < Power on/off Mute Circuitry
back notch filters < Linked Stereo DSP Processing for ease of use < Front-panel RTA-M XLR input with phantom
< dbx 120A Sub-harmonic Synthesizer < 24-Bit ADC/24-Bit DAC, >113 dB Dynamic power
< Classic dbx Input Compression Range < 25 User Programs/25 Factory Programs
< JBL® Speaker and Crown® Power Amp Tun- < 2-Channel XLR Input and 6-Channel XLR < Full Graphic LCD Display
ings included Output < Front Panel Input and Output Meters
dbx Professional 8760 S. Sandy Pkwy. 801.568.7660 PHON E 801.568.7583 IN T’L FAX www.dbxpro.com
Products Sandy, Utah 84070 801.568.7662 FAX customer@dbxpro.com
Complete Loudspeaker Management System
PA+
Specifications
ANALOG INPUTS: D/A PERFORMANCE:
Number of Inputs: (2) Line inputs. (1) RTA Mic input Dynamic Range: 112 dB A-weighted, 110 dB unweighted
Connectors: (2) Female XLR line inputs, XLR RTA Mic input Sample Rate: 48kHz
Type: Electronically balanced/RF filtered
Impedance: > 40kohm
SYSTE M PE R FO R MAN C E:
Max input line level: > +20dBu
Dynamic Range: 110 dB A-weighted, >107 dB unweighted
CMRR: > 45dB
THD+N: 0.004% typical at +4 dBu, 1kHz, 0 dB input gain
RTA Mic Phantom Voltage: +15VDC
Frequency Response: 20Hz – 20kHz, +/- 0.5 dB
RTA Mic EIN: < -117dBu, 22Hz-22kHz, 150
Interchannel Crosstalk: < -110 dB, -120 dB typical
Crosstalk input to output: < -100 dB
ANALOG OUTPUTS:
Number of Outputs: (6) Line Outputs
P O W E R S U P P LY :
Connectors: Male XLR
Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz,
Type: Electronically balanced, RF filtered
Power Requirements: 25 Watts
Impedance: 120 ohms
Max Output Level: > +20dBu
CMRR: > 45dB PHYSICAL:
Alignment Delay: 10ms per channel (60ms total) Weight: 5.5 lbs.(2.5 kg) Shipping weight 7 lbs. (3.18 kg)
Dimensions: 1.75” (4.4cm) H x 5.75”(14.6cm) D x 19” (48.26cm) W
A/D PERFORMANCE:
Type: dbx Type IV conversion system
Dynamic Range: 110 dB A-weighted, >107 dB unweighted
Type IV dynamic range: 123 dB with transient material, A-weighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted,
22kHz BW
Sample Rate: 48kHz
dbx Professional 8760 S. Sandy Pkwy. 801.568.7660 PHON E 801.568.7583 IN T’L FAX www.dbxpro.com
Products Sandy, Utah 84070 801.568.7662 FAX customer@dbxpro.com
Part number: 18-0683
