Declaration of Conformity
For the following equipment：
Product Name: Switching Power Supply
Model Designation: Rx-yz (x=S/D/T/ID/Q) (y=65/75) (z=-3.3/-5/-12/-15/-24/-48/A/B/C/D)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards
were applied：
RoHS Directive (2011/65/EU)、(EU)2015/863
Low Voltage Directive (2014/35/EU)：
EN60950-1:2006+A11+A1+A12+A2 TUV certificate No：R50045775
Electromagnetic Compatibility Directive (2014/30/EU)：
EMI (Electro-Magnetic Interference)
Conducted emission / Radiated emission
EN55032:2015 Class B
Harmonic current EN61000-3-2:2014
Voltage flicker EN61000-3-3: 2013
EMS (Electro-Magnetic Susceptibility)
EN55024:2010+A1:2015 EN61000-6-2:2005
ESD air EN61000-4-2:2009 Level 3 8KV
ESD contact EN61000-4-2: 2009 Level 2 4KV
RF field susceptibility EN61000-4-3:2006+A1:2008+A2:2010 Level 3 10V/m
EFT bursts EN61000-4-4:2012 Level 3 2KV/5KHz
Surge susceptibility EN61000-4-5:2014 Level 4 2KV/Line-Line
Surge susceptibility EN61000-4-5:2014 Level 4 4KV/Line-Earth
Conducted susceptibility EN61000-4-6:2014 Level 3 10V
Magnetic field immunity EN61000-4-8:2010 Level 4 30A/m
Voltage dip, interruption EN61000-4-11:2004 >95% dip 0.5 periods 30% dip 25 periods >95% interruptions 250 periods
Note:
A component power supply with load will be installed into final equipment which consists of an electronically shielded metal
enclosure. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.
The EMC tests mentioned above are performed using a well defined metal plate to simulate said metal enclosure.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies”.(as available on
http://www.meanwell.com)” and TDF (Technical Documentation File)
This Declaration is effective from serial number EB9xxxxxxx
Person responsible for marking this declaration：
MEAN WELL Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 24891, Taiwan
(Manufacturer Address)
Johnny Huang/Manager, Certification Center： Alex Tsai/Director, Marketing Department：
(Name / Position) (Signature) (Name / Position) (Signature)
Taiwan Jul. 22nd, 2019
(Place) (Date)
Version：9
