TECHNICAL DATA

ELECTRIC CHAIN HOISTS

TROLLEYS
INDUSTRY
General information
General information 03

Combinations
Combination electric chain hoist + trolley 03

Performance data
Electric chain hoists GPM and GP 3-Ph 04 - 05
Trolleys GHF and GMF 3-Ph 06 - 07
Electric chain hoists GPM, GP and electric trolleys GMF 1-Ph 08 - 09

Dimensions
Electric chain hoists 10
Trolleys 11
General information

GIS electric chain hoists are used everywhere, where process safety of lifting systems is important: in the hard three-
shift operations in automotive and other high production industries, in dusty or chemical aggressive environments, for
outdoor use, for the entertainment industry or for extreme lifting heights in wind power plants.
GIS electric chain hoists and trolleys are made to high standards.

The safety factor of the load chain is at least 8 (DIN EN 14492 A5, ISO M5) which reduces wear and tear and increa-
ses the service life.

GIS electric chain hoists have been developed and manufactured in Switzerland for more than 55 years.

For many industrial lifting applications standard GIS electric chain hoists offer the ideal solution. Depending on the
complexity of the task and the conditions on site we offer GIS special products. A wide range of accessories and
options is available.

GIS electric chain hoists and trolleys meet the requirements of the EC Machinery Directive and the relevant ISO and
EN standard.

The values listed in the tables are approximate values. Differences due to technical modifications are always possible
and subject to change.

Combination electric chain hoist + trolley

The table below helps you to select the ideal combination of electric chain hoist and trolley.

Type GHF500K GHF/GMF1250 GHF/GMF2500 GHF/GMF5000 GHF/GMF6300 GISKB

Lifting capacity (kg): 500 1250 2500 5000 6300

GISKB III/IV

GISKB Alu
GISKB I/II
100 - 149

88 - 200

88 - 300
70 - 240

91 - 300

91 - 300
70 - 140
50 - 99

Flange width (mm):

Type
with eyebolt suspension   x x x x x x  x 
GPM250
with hook suspension x x x x x x x x  x x
with eyebolt suspension     x x x x  O 
GP250
with hook suspension x x x x x x x x x  x
with eyebolt suspension     x x x x  O 
GP500
with hook suspension x x x x x x x x x  x
with eyebolt suspension       x x  O x
GP1000 with hook suspension x x x x x x x x x x x
with suspension part x x x x x x   x x x
with eyebolt suspension x x x x   x x x x x
GP1600 with hook suspension x x x x x x x x x x x
with suspension part x x x x x x   x x x
with eyebolt suspension x x x x   x x x x x
GP2500 with hook suspension x x x x x x x x x x x
with suspension part x x x x x x   x x x
O = special eyebolt suspension for GISKB III/IV

03
 Electric chain hoists GPM250 and GP250 - 2500 3-PH
The GP is simple in its structure and does not contain any sensitive electronics, which
minimises the risk of operational interruptions. It is characterised by quiet running and is made for longevity whilst
working hard. The ergonomic control switch with 42 V low voltage allows convenient and safe working.
Maintenance is easy, quick and needs no special tools.

Scope of supply
GPM250 + GP250 / 500 / 1000: with eyebolt suspension, GP1600 / 2500: without suspension,
with geared limit switch for highest and lowest hook position, with chain bucket,
with 2-button control switch with emergency-stop,
standard lifting height 3 m, control cable length 1.8 m

Classification
DIN EN 14492/ISO A3/M3 A4/M4 A5/M5 A6/M6 A7/M7 A7/M7 Lifting speed Lifting speed
Cycles/Day 15 (25 % ED) 30 (30 % ED) 60 (40 % ED) 120 (50 % ED) 240 (60 % ED) 240 (60 % ED) 50 Hz 60 Hz
Type Lifting capacity (kg) (m/min) (m/min)

GPM250/1NF - 320 250 200 - - 8/2 9.6/2.4

GPM250/1SF - - 125 100 - - 16/4 19.2/4.8
GP250/1N 400 320 250 200 160 125 8 9.6
GP250/1NF 400 320 250 200 160 125 8/2 9.6/2.4
GP250/1SF - 160 125 100 - - 16/4 19.2/4.8
GP250/1NL 400 320 250 200 160 125 4 4.8
GP250/2N - 630 500 400 320 250 4 4.8
GP250/2NF - 630 500 400 320 250 4/1 4.8/1.2
GP250/2NL - 630 500 400 320 250 2 2.4
GP500/1N 800 630 500 400 320 250 8 9.6
GP500/1NF 800 630 500 400 320 250 8/2 9.6/2.4
GP500/1SF - 320 250 200 160 125 16/4 19.2/4.8
GP500/1NL 800 630 500 400 320 250 4 4.8
GP500/2N - 1250 1000 800 630 500 4 4.8
GP500/2NF - 1250 1000 800 630 500 4/1 4.8/1.2
GP500/2NL - 1250 1000 800 630 500 2 2.4
GP1000/1N 1600 1250 1000 800 630 500 8 9.6
GP1000/1NF 1600 1250 1000 800 630 500 8/2 9.6/2.4
GP1000/1SF - 630 500 - - - 16/4 19.2/4.8
GP1000/1NL 1600 1250 1000 800 630 500 4 4.8
GP1000/2N - 2500 2000 1600 1250 1000 4 4.8
GP1000/2NF - 2500 2000 1600 1250 1000 4/1 4.8/1.2
GP1000/2NL - 2500 2000 1600 1250 1000 2 2.4
GP1600/1NF 2500 2000 1600 - - - 8/2 9.6/2.4
GP1600/1SF - 1000 800 - - - 16/4 19.2/4.8
GP1600/1NL 2500 2000 1600 1250 1000 - 4 4.8
GP1600/2NF - 4000 3200 - - - 4/1 4.8/1.2
GP1600/2NL - 4000 3200 2500 2000 - 2 2.4
GP2500/1B - 3200 - - - - 6.4 7.8
GP2500/1NF - - 2500 2000 - - 8/2 9.6/2.4
GP2500/1BF - 3200 - - - - 6.4/1.6 7.8/1.9
GP2500/1SF - - 1250 1000 - - 16/4 19.2/4.8
GP2500/1NL - - 2500 2000 - - 4 4.8
GP2500/1BL - 3200 - - - - 3.2 3.8
GP2500/2B - 6300 - - - - 3.2 3.8
GP2500/2NF - - 5000 4000 - - 4/1 4.8/1.2
GP2500/2BF - 6300 - - - - 3.2/0.8 3.8/1
GP2500/2NL - - 5000 4000 - - 2 2.4
GP2500/2BL - 6300 - - - - 1.6 1.9

04
• Standard voltages: 3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz

• 42 V low voltage control

• Profile steel chain according to EN818-7, case hardened and manganese phosphated

• Load hook according to DIN 15401, 360° rotatable

• Isolation class F

• Area of application: -15 °C to +50 °C

• Utilisation period 1600 h (DIN EN 14492 A5, ISO 5M) GPM250, GP250 - 2500 3-Ph
Lifting capacity up to 6300 kg

Power consumption Sound pressure

Motor power fully-loaded Protection Number of Chain diameter Chain weight Weight Weight equipped, level, in hall, Fuse
3 x 400 V / 50 Hz class chain falls per meter unequipped 3 m lifting height 1 m distance protection
(kW) (A) (mm) (kg) (kg) (kg) (dBA) (A)

0.37/0.1 2.0/1.2 IP65 1 3.75x10.75 0.34 14 17 65 6

0.37/0.1 2.0/1.2 IP65 1 3.75x10.75 0.34 14 17 65 6
0.72 2.8 IP65 1 3.75x10.75 0.34 22 24 65 6
0.72/0.18 2.8/1.7 IP65 1 3.75x10.75 0.34 22 24 65 6
0.72/0.18 2.8/1.7 IP65 1 3.75x10.75 0.34 22 24 65 6
0.55 1.8 IP65 1 3.75x10.75 0.34 22 24 65 6
0.72 2.8 IP65 2 3.75x10.75 0.34 22 25 65 6
0.72/0.18 2.8/1.7 IP65 2 3.75x10.75 0.34 22 25 65 6
0.55 1.8 IP65 2 3.75x10.75 0.34 22 25 65 6
0.72 2.8 IP65 1 5.25x15 0.69 23 26 65 6
0.72/0.18 2.8/1.7 IP65 1 5.25x15 0.69 23 26 65 6
0.72/0.18 2.8/1.7 IP65 1 5.25x15 0.69 23 26 65 6
0.55 1.88 IP65 1 5.25x15 0.69 23 26 65 6
0.72 2.8 IP65 2 5.25x15 0.69 23 28 65 6
0.72/0.18 2.8/1.7 IP65 2 5.25x15 0.69 23 28 65 6
0.55 1.88 IP65 2 5.25x15 0.69 23 28 65 6
2.3 6.4 IP65 1 7.45x23 1.37 49 57 80 10
2.3/0.57 5.7/4.1 IP65 1 7.45x23 1.37 50 58 80 10
2.3/0.57 5.7/4.1 IP65 1 7.45x23 1.37 50 58 80 10
1.5 3.7 IP65 1 7.45x23 1.37 49 57 80 10
2.3 6.4 IP65 2 7.45x23 1.37 49 61 80 10
2.3/0.57 5.7/4.1 IP65 2 7.45x23 1.37 50 62 80 10
1.5 3.7 IP65 2 7.45x23 1.37 49 61 80 10
3.7/0.93 9.5/5.5 IP65 1 9.4x27.4 2.22 77 93 80 16
3.7/0.93 9.5/5.5 IP65 1 9.4x27.4 2.22 77 93 80 16
2.2 5.7 IP65 1 9.4x27.4 2.22 72 88 80 16
3.7/0.93 9.5/5.5 IP65 2 9.4x27.4 2.22 77 102 80 16
2.2 5.7 IP65 2 9.4x27.4 2.22 72 97 80 16
3.7 - IP65 1 11.75x32.9 3.53 72 95 80 16
3.7/0.93 9.5/5.5 IP65 1 11.75x32.9 3.53 77 100 80 16
3.7/0.93 9.5/5.5 IP65 1 11.75x32.9 3.53 77 100 80 16
3.7/0.93 9.5/5.5 IP65 1 11.75x32.9 3.53 77 100 80 16
2.2 6.1 IP65 1 11.75x32.9 3.53 72 95 80 16
2.2 6.1 IP65 1 11.75x32.9 3.53 72 95 80 16
3.7 - IP65 2 11.75x32.9 3.53 72 112 80 16
3.7/0.93 9.5/5.5 IP65 2 11.75x32.9 3.53 77 117 80 16
3.7/0.93 9.5/5.5 IP65 2 11.75x32.9 3.53 77 117 80 16
2.2 6.1 IP65 2 11.75x32.9 3.53 72 112 80 16
2.2 6.1 IP65 2 11.75x32.9 3.53 72 112 80 16

05
 Trolleys GHF500K, GHF1250 - 6300 and GMF1250 - 6300 3-PH
GIS travel trolleys are simple in design and allow smooth transportation of loads up to 6300 kg
on steel beams. The electric chain hoist serves as a lifting device. The travel movement, tailored to the load capacity
and the local conditions is either manually or electrically driven. The integrated fall and climbing protection made of
solid cast steel, as well as the intervention protection ensure maximum safety. Due to their good handling characteris-
tics and their longevity, GIS trolleys are often used by our customers as components for end carriage of underslung
travelling cranes.

Scope of supply
Push trolley GHF consisting of 2 side plates, support bolt(s)

Electric trolley GMF1250 / 2500 consisting of 2 side plates, electric drive unit, support bolt, counterweight,
DC-spring loaded brake, connection cable to hoist, 4-button control switch with emergency stop,
control cable length depending on lifting height

Electric trolley GMF5000 / 6300 consisting of 2 side plates, 2 electric drive units, 2 support bolts,
2 DC-spring loaded brakes, connection cable to hoist, 4-button control switch with emergency stop,
control cable length depending on lifting height

Classification
DIN EN 14492/ISO A3/M3 A4/M4 A5/M5 A6/M6 A6/M6 Travelling speed Travelling speed
Cycles/Day 15 (25 % ED) 30 (30 % ED) 60 (40 % ED) 120 (50 % ED) 120 (50 % ED) 50 Hz 60 Hz
Type Lifting capacity (kg) (m/min) (m/min)

GHF500K 500 500 500 400 320 - -

GHF1250 1250 1000 800 630 500 - -
GMF1250/N 1250 1000 800 630 500 12 14.4
GMF1250/NF 1250 1000 800 630 500 12/4 14.4/4.8
GMF1250/SF 1250 1000 800 630 500 24/6 28.8/7.2
GHF2500 2500 2000 1600 1250 1000 - -
GMF2500/N 2500 2000 1600 1250 1000 12 14.4
GMF2500/NF 2500 2000 1600 1250 1000 12/4 14.4/4.8
GMF2500/SF 2500 2000 1600 1250 1000 24/6 28.8/7.2
GHF5000 5000 4000 3200 2500 2000 - -
GMF5000/NF 5000 4000 3200 2500 2000 12/4 14.4/4.8
GMF5000/SF 5000 4000 3200 2500 2000 24/6 28.8/7.2
GHF6300 6300 5000 4000 3200 2500 - -
GMF6300/NF 6300 5000 4000 3200 2500 12/4 14.4/4.8
GMF6300/SF 6300 5000 4000 3200 2500 24/6 28.8/7.2

06
• Standard voltages: 3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz

• 42 V low voltage control

• Side plates and load wheels made of cast iron (GHF and GMF), load wheels for flat running surfaces
Side plates made of die-cast aluminium and load wheels made of glass fibre reinforced plastic (GHF500K)

• Galvanised support bolts, flange width infinitely variable

• Fall and climbing protection

GHF500K GHF1250 - 6300 GMF1250 - 6300 3-Ph

Lifting capacity up to 500 kg Lifting capacity up to 6300 kg Lifting capacity up to 6300 kg

Power consumption Adjustable Adjustable Minimum

Motor fully-loaded Protection class Weight, flange width, flange width, curve radius Maximum
power 3 x 400 V / 50 Hz with standard spindle standard spindle optional spindle (with carrier rollers) flange thickness
(kW) (A) (kg) (mm) (mm) (mm)

- - - 2.5 50 - 99 100 - 149 1200 24

- - - - 70 - 140 70 - 240 1200 26
0.25 0.8 IP54 - 70 - 140 70 - 240 1200 26
0.15/0.045 0.65/0.75 IP54 - 70 - 140 70 - 240 1200 26
0.3/0.075 1.0/0.9 IP54 - 70 - 140 70 - 240 1200 26
- - - - 88 - 200 88 - 300 1200 30
0.25 0.8 IP54 - 88 - 200 88 - 300 1200 30
0.15/0.045 0.65/0.75 IP54 - 88 - 200 88 - 300 1200 30
0.3/0.075 1.0/0.9 IP54 - 88 - 200 88 - 300 1200 30
- - - - 91 - 300 - 1200 35
2x0.15/0.045 2x0.65/0.75 IP54 - 91 - 300 - 1200 35
2x0.3/0.075 2x1.0/0.9 IP54 - 91 - 300 - 1200 35
- - - - 91 - 300 - 1200 36
2x0.15/0.045 2x0.65/0.75 IP54 - 91 - 300 - 1200 36
2x0.3/0.075 2x1.0/0.9 IP54 - 91 - 300 - 1200 36

07
 Electric chain hoists GPM250 and GP250 - 1000 1-PH
The GPM and GP hoists are available in a 1-phase version destined for workshop use in
the absence of 3-phase power supply, for mobile or outdoor use.

Scope of supply
GPM250 + GP250 / 500 / 1000: with eyebolt suspension,
with chain bucket, with 2-button control switch with emergency-stop,
without geared limit switch for highest and lowest hook position,
standard lifting height 3 m, control cable length 1.8 m

Classification
DIN EN 14492/ISO A3/M3 A4/M4 A5/M5 A5/M5 A5/M5 A5/M5 Lifting speed Lifting speed
Cycles/Day 15 (25 % ED) 30 (30 % ED) 60 (40 % ED) 60 (40 % ED) 60 (40 % ED) 60 (40 % ED) 50 Hz 60 Hz
Type Lifting capacity (kg) (m/min) (m/min)

GPM250/1N 1Ph - - 125 100 80 - 8 9.6

GPM250/1NL 1Ph - - 250 200 160 125 4 4.8
GP250/1N 1Ph - - 250 200 160 125 8 9.6
GP250/1NL 1Ph - - 250 200 160 125 4 4.8
GP250/2N 1Ph - - 500 400 320 250 4 4.8
GP250/2NL 1Ph - - 500 400 320 250 2 2.4
GP500/1N 1Ph - - 250 200 160 125 8 9.6
GP500/1NL 1Ph - - 500 400 320 250 4 4.8
GP500/2N 1Ph - - 500 400 320 250 4 4.8
GP500/2NL 1Ph - - 1000 800 630 500 2 2.4
GP1000/1N 1Ph - - 500 400 - - 8 9.6
GP1000/1NL 1Ph - - 1000 800 630 500 4 4.8
GP1000/2N 1Ph - - 1000 800 - - 4 4.8
GP1000/2NL 1Ph - - 2000 1600 1250 1000 2 2.4

Electric trolleys GMF1250 - 2500 1-PH

The electric trolleys EMFE are available in a 1-phase version destined for workshop use
in the absence of 3-phase power supply.

Scope of supply
Electric trolley GMF1250 / 2500 consisting of 2 side plates, electric drive unit, support bolt, counterweight,
DC-spring loaded brake, connection cable to hoist, 4-button control switch with emergency stop,
control cable length depending on lifting height

Classification
DIN EN 14492/ISO A3/M3 A4/M4 A5/M5 A6/M6 A6/M6 Travelling speed Travelling speed
Cycles/Day 15 (25 % ED) 30 (30 % ED) 60 (40 % ED) 120 (50 % ED) 120 (50 % ED) 50 Hz 60 Hz
Type Lifting capacity (kg) (m/min) (m/min)

GMF1250/N 1Ph 1250 1000 800 630 500 12 14.4

GMF2500/N 1Ph 2500 2000 1600 1250 1000 12 14.4

08
• Standard voltages: 1 × 230 V / 50 Hz, 1 × 115 V / 50 Hz

• 110 V or 230 V control voltage (GPM250)

42 V low voltage control (GP250/500/1000)

• Profile steel chain according to EN818-7, case hardened and manganese phosphated

• Load hook according to DIN 15401, 360° rotatable

• Isolation class F

• Area of application: -15 °C to +50 °C

GPM250, GP250 - 1000 1-Ph
• Utilisation period 1600 h (DIN EN 14492 A5, ISO 5M) Lifting capacity up to 2000 kg

Power consumption Sound pressure

Motor fully-loaded Protection Number of Chain Chain weight Weight Weight equipped, level, in hall, Fuse
power 1 x 230 V / 50 Hz class chain falls diameter per meter unequipped 3 m lifting height 1 m distance protection
(kW) (A) (mm) (kg) (kg) (kg) (dBA) (A)

0.25 2.9 IP65 1 3.75x10.75 0.34 14 17 76 10

0.25 2.9 IP65 1 3.75x10.75 0.34 14 17 76 10
0.55 4.7 IP65 1 3.75x10.75 0.34 22 24 76 10
0.55 4.7 IP65 1 3.75x10.75 0.34 22 24 76 10
0.55 4.7 IP65 2 3.75x10.75 0.34 22 25 76 10
0.55 4.7 IP65 2 3.75x10.75 0.34 22 25 76 10
0.55 4.7 IP65 1 5.25x15 0.69 23 26 76 10
0.55 4.7 IP65 1 5.25x15 0.69 23 26 76 10
0.55 4.7 IP65 2 5.25x15 0.69 23 28 76 10
0.55 4.7 IP65 2 5.25x15 0.69 23 28 76 10
1.5 6 IP65 1 7.45x23 1.37 48 56 80 16
1.5 6 IP65 1 7.45x23 1.37 48 56 80 16
1.5 6 IP65 2 7.45x23 1.37 48 60 80 16
1.5 6 IP65 2 7.45x23 1.37 48 60 80 16

• Standard voltages: 1 × 230 V / 50 Hz, 1 × 115 V / 50 Hz

• 42 V low voltage control

• Side plates and load wheels made of cast iron, load wheels for flat running surfaces

• Galvanised support bolts, flange width infinitely variable

GMF1250 – 2500 1-Ph
• Fall and climbing protection Lifting capacity up to 2500 kg

Power consumption Adjustable Adjustable Minimum

Motor fully-loaded Protection class Weight, flange width, flange width, curve radius Maximum
power 1 x 230 V / 50 Hz with standard spindle standard spindle optional spindle (with carrier rollers) flange thickness
(kW) (A) (kg) (mm) (mm) (mm) (mm)

0.25 1.0 IP54 - 70 - 140 70 - 240 1200 26

0.25 1.0 IP54 - 88 - 200 88 - 300 1200 30

09
 Dimensions electric chain hoists

Type a1 a2* a3* a4 b1 b2* b3 c1 c2 eye c2 hook c3 eye* c3 hook* h1 eye h1 hook Schematic
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) drawing

GPM250/1 204 245 122 Ø30 396 120 20 134 39 90 419 470 330 381 9500.9201.5
GP250/1 246 296 151 Ø40 444 155 24 162 49 124 462 537 406 480 9510.9201.5
GP250/2 246 296 168 Ø40 444 155 24 162 49 124 462 537 432 506 9510.9202.5
GP500/1 246 296 151 Ø40 444 155 24 162 49 124 462 537 414 488 9511.9201.5
GP500/2 246 296 175 Ø40 444 155 24 162 49 124 462 537 453 528 9511.9202.5
GP1000/1 328 385 198 Ø52 548 180 33 212 58 140 598 680 535 617 9515.9201.5
GP1000/2 328 385 235 Ø52 548 180 33 212 58 140 598 680 595 676 9515.9202.5
GP1600/1 380 452 259 Ø75 650 222 35 237 118 147 870 899 659 688 9520.9200.5
GP1600/2 380 452 306 Ø75 650 222 35 237 118 147 870 899 727 756 9520.9201.5
GP2500/1 380 452 259 Ø62 650 222 41 237 111 204 870 963 692 785 9521.9200.5
GP2500/2 380 452 313 Ø62 650 222 41 237 111 204 870 963 781 874 9521.9201.5
*Chain bucket for lifting height 3 m

GPM250, GP250 - 2500, 1-fall

a2
a1
a4 b1
b3
c2
c2

c1

h1

c3
h1
c3

b3

a3 b2

GP250 - 2500, 2-falls

a2
a1
b1
a4 b3
c2
c2

c1

h1

c3
h1
c3

b3

a3 b2

10
 Dimensions trolleys

Type e1 e2 f1 f2 f3 f4 f5 g1 g2 h2 Schematic
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) drawing

50 - 99 100 - 149 GPM250/1 GP250/1 GP250/2

GHF500K 215 - - - - 183 233 62 48 122 330 406 432 9248.9251.5
70 - 140 70 - 240 GP250/1 GP250/2 GP500/1 GP500/2
GHF1250 239 - - - - 186 286 38.5 48 179 406 432 414 453 9249.9200.5
GMF1250 239 49 175* 330 274.5 186 286 32 48 179 406 432 414 453 9249.9205.5
88 - 200 88 - 300 GP500/2 GP1000/1 GP1000/2
GHF2500 286 - - - - 258 358 44.5 57 218 453 535 595 9249.9201.5
GMF2500 286 26 190 336 280.5 258 358 38 57 218 453 535 595 9249.9206.5
91 - 300 GP1600/1 GP1600/2 GP2500/1 GP2500/2
GHF5000 341 - - - - 368 47.5 57 241 633 701 673 762 9249.9202.5
GMF5000 341 - - 338.5 282.5 368 40.5 57 241 633 701 673 762 9249.9207.5
91 - 300 GP2500/1 GP2500/2
GHF6300 387 - - - - 392 49.5 54.5 270 673 762 9249.9203.5
GMF6300 387 - - 344.5 289.5 392 46.5 54.5 270 673 762 9249.9208.5
*Flange width ≤ 120mm: Additional counterweight extension required, 175 + 34 mm

GHF500K GHF500K
e1 f5

g1
g2

4 3 2 1
4 3 2 1
4 3 2 1

f4
D D

D D D D

GHF1250 / 2500 GHF5000 / 6300 GHF1250 - 6300

e1 e1 f5

C C
C C

C C
g2

g2

g1

4 3 2 1
B B B B

4 3 2 1
B B
f4
D D

GMF1250 / 2500 D GMF1250 / 2500 4GMF5000 / 6300 3 D 2

e1
In Bearbeitung Klasse B Ersetzt durch Ersatz für
e2 f2 In Bearbeitung

f3 f3
A Rev. Datum User Massstab A Klasse B Ersetzt durch Ersatz für

GHF2500 Seite 1 / A Rev. Datum User Massstab A

-
1 : 2.5 - GHF 5000 1 /
Gezeichnet 19.03.2020 S.Felber Massbild techn. Datenblatt A4
D 19.03.2020 S.Felber Massbild techn. Datenblatt 1 : 2.5 A4

9249.9286.4 -
Revision Gezeichnet

f1 f5 f5 f2 -
Revision

4 3 2 1 In Bearbeitung Klasse B Ersetzt durch Ersatz für

9249.9288.4
A Rev. Datum User Massstab A 4 3 2 1
C C - GHF5000 Seite 1 /

Gezeichnet 19.03.2020 S.Felber Massbild techn. Datenblatt 1 : 2.8 A4

9249.9287.4 -
Revision
g2

g1
g1

C 4 3 2 1 C
4 3 2 1

D D
B B
h2

GMF5000 / 6300
h2

e1 B B

In Bearbeitung Klasse B Ersetzt durch Ersatz für

C A Rev. Datum User Massstab AC

- GMF2500 Seite 1 /

1 : 2.5
f4
A4
Gezeichnet 19.03.2020 S.Felber Massbild techn. Datenblatt

9249.9289.4 -
Revision
g2

In Bearbeitung B
4 3 2 1 Klasse Ersetzt durch Ersatz für

A Massstab A
GMF2500 Vorne kompl.
Rev. Datum User
1 /
- In Bearbeitung
A
Gezeichnet 08.06.2020 T.Keller Massbild techn. Datenblatt 1 : 5.5 A3 Rev. Datum User
GMF5
-

f4 9249.9292.4 -
Revision

Gezeichnet 19.03.2020 S.Felber Massbi

4 3 2 1
B B 4 3 2
11
 Subject to change. 06.20 9500.9105.1
Crane systems Hoisting equipment Vacuum handling systems
GISKB steel crane construction kit for line- Over 55 years experience in the manufacture GIS vacuum handling systems for the ergo-
bound or all-round goods handling. GISKB of electric chain hoists: robust, durable, reliable nomic and gentle handling of goods made
aluminium crane system, slewing pillar and wall and highly resistant to wear. Simple main- of different materials like wood, glass, stone,
cranes for smooth handling of transport goods. tenance. Various special versions for every metal or plastic. In combination with the appro-
Travelling cranes and slewing cranes made of application area. Wide range of accessories priate crane system.
steel profiles for heavier loads. and options.

GIS AG – the specialist for electric chain hoists and crane systems Founding of the GIS AG in 1957 I With own subsidiary in Germany
and England I Development and production of electric chain hoists in Switzerland for over 55 years I Swiss manufacturer of complete crane
systems inc. hoisting equipment and vacuum lifters I Certified to ISO 9001 since 1994 I Complete market services from project planning to
installation, start-up and maintenance I International sales network with over 50 qualified partners worldwide

swiss lifting solutions

Certified to ISO 9001

GIS AG I swiss lifting solutions I Luzernerstrasse 50 I CH-6247 Schötz I Telephone +41 (0)41 984 11 33 I tel@gis-ag.ch I www.gis-ag.ch