Department of Mechanical Engineering

Semester III

Scheme and Syllabi 37 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Mechanics of Materials
AMN13101 3-0-0:3
Prerequisite: NIL
Course Outcomes
S.N. Outcomes BT BT
Level Description
CO1 Understand the concept of internal forces and moments, stress, strain, 2 Understand
deformations in members subjected to axial, bending and torsional
loads
CO2 Understand the concepts of stress and strain at a point, and principal 2 Understand
stress and strain to solve the problems of engineering elasticity
CO3 Apply the concepts to calculate stress, strain, and displacements in 3 Apply
mechanical structures and components containing the fundamental
elements such as beams, shaft, shells and springs
CO4 Analyse the mechanical engineering structures and components for 4 Analyse
safer mechanical design by considering appropriate failure criteria
and the design requirements.

Course Articulation Matrix:

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

CO1 3 3 2 2 1 - 2 1 2 2 1 1 3 3
CO2 3 3 2 2 1 - 2 1 1 2 1 1 3 3
CO3 3 3 2 2 1 - 1 1 1 1 1 1 3 3
CO4 3 3 3 2 1 1 1 1 1 1 1 2 3 3

Unit Content Lectures

1 Analysis of Stress and Strain: Uniaxial Stress and Strain, Hooke’s Law, 6
Stress-Strain Curves, Elastic Constants, Strain Energy, Statically Indeterminate
Problems, Thermal Effects, Impact Loading.
2 Biaxial Stress and Strain: Stress at a Point, Stress Transformation, Analysis 8
of Strain, Strain-Displacement Relations, Strain Transformation, Strain
Measurements, Principal Stresses and Strain
3 Bending and Shear Stresses: Shear Force and Bending Moment Diagrams, 6
Pure Bending, Normal Stress and Shear Stresses in beams, Composite Beams
4 Torsion of Shaft, Springs, and Pressure Vessels: Torsion of Circular Shaft, 6
Power Transmitted by a Shaft, Compound Shaft, Combined Loadings, Thin-
Walled Shells, and Springs (Open and Closed Coils)
5 Deflections of Beams: Equation of Elastic Curve, Methods for Determining 8
Deflections: Double Integration, Macaulay’s Method, Moment-Area Method,
Castigliano’s Theorem
6 Columns and Theories of Failure: Euler’s Theory for Long Columns, 6
Rankine-Gordon Formula, Eccentrically Loaded Columns, Theories of failure

Scheme and Syllabi 38 w.e.f.2022-23

 Department of Mechanical Engineering

Text Books
1. Mechanics of Materials, Gere and Timoshenko, CBS Publications.
2. Introduction to Mechanics of Solids, Crandall, Dahl and Lardener, Tata Mcgraw Hill
Publications.
3. Mechanics of materials, Hibbeler, R.C., 2005, Pearson Education.
Reference Books
1. Elements of Strength of Materials, S.P. Timoshenko and D.H. Young, East-West Press Pvt.
Ltd. Publications.
2. Mechanics of Materials, Pytel and Kiusalaas, Cengage Learning Publications.
3. Mechanics of Materials, E. P. Popov, Prentics Hall Publications.
4. Strength of Materials, G. H. Ryder, Macmillan India Limited.
5. Strength of Materials, Pytel and Singer, Harpercollins College division publications.
6. Mechanics of Materials, Riley, Struges and Morris, John Wiley & Sons.

##

Scheme and Syllabi 39 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Material Testing Lab
AM***** 0-0-2:1

Course Outcome

S.N. Outcomes
CO-1 To understand microstructural and mechanical behavior of materials for common metals,
glass, and composites
CO-2 To experimentally analyse the mechanical properties of materials such as common metals
and composites
CO-3 To analyze the behavior of materials under tension, torsion and bending, shear, and impact
CO-4 To understand the mechanical testing of materials to design safe mechanical components

Course Articulation Matrix:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 2 2 3 1 1 - 1 2 1 - - 2 2
CO2 3 2 2 3 1 1 - 1 2 1 - - 2 2
CO3 3 2 2 3 1 1 - 1 2 1 - - 2 2
CO4 3 2 3 3 1 1 - 1 2 1 - - 3 2

List of Experiments
Unit
1 Specimen preparation by cutting, grinding, polishing and etching of given materials for
comparative micro-structural examination.
2 To perform the Tensile Test on Universal Testing Machine (UTM) for Mild Steel Specimen
and draw the stress strain curve. Using stress strain curve find out the following: (a) Yield
Stress (b) Ultimate Stress (c) Breaking Stress (d) Percentage Elongation (e) Percent
Reduction in Area (f) Modulus of Elasticity.
3 To predict creep characteristics of given materials by plotting strain vs. time curves for
different loadings.
4 To study the effect of surface treatment (Etching) on the strength of glass.
5 To perform Torsion Test on Torsion Testing Machine for Mild Steel Specimen and draw
Torque-Twist curve. Using Torque-Twist curve find the following (a) Modulus of Rigidity
of the material (b) Yield point value and ultimate point value of the Torque
6 Fabrication and mechanical testing of composite materials made by hand-layup technique in
the laboratory.
7 To study the fatigue behavior of different materials.
8 To perform the Impact Test on Impact Testing Machines using (a) Charpy Test (b) Izod Test
and find the Impact Strength of the material.
9 To perform the Beam Bending Test on Beam Bending Apparatus and find the value of
Modulus of Elasticity by measurement of slope & deflection of the beam and draw Load Vs
Deflection Curve.
10 To perform the Shear Test on Shear Testing Machine for Wooden Specimen and find the
Maximum Shear Stress (parallel to grain) of the Wood.

Scheme and Syllabi 40 w.e.f.2022-23

 Department of Mechanical Engineering

Reference Books

1. Pytel A H and Singer F L, “Strength of Materials”, 4th Edition, Harper Collins, New Delhi,
1987.
2. Beer P F and Johnston (Jr) E R, “Mechanics of Materials” SI Version, Tata McGraw Hill,
India, 2001.
3. Timoshenko S P and Young D H, “Elements of Strength of Materials”, 5th Edition, East
West Press, New Dlehi, 1984.
4. Bedi D S, “Strength of Materials”, 3rd Edition, Khanna Publishing Company 3rd Edition,
New Delhi, 2000.
5. Jindal U C, “Introduction to Strength of Materials”, GalgotiaPublsihing Private Limited 3rd
Edition, New Delhi, 2001.
6. William D. Callister Jr., David G. Rethwisch “Materials Science and Engineering: An
Introduction”.
7. Raghavan V “Materials Science and Engineering: A First Course”.

##

Scheme and Syllabi 41 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Energy Conversion Technologies
MEN13101 3-0-0:3

Prerequisites: Engineering Thermodynamics

Course Outcomes:

CO1 Students will be able to understand the concept of Energy Conversion Technologies and
systems.
CO2 Students will be able to Identify the components related to steam power plants and
internal combustion engines along with their working principle
CO3 Students will be able to do the thermal analysis of the Energy Conversion Technologies
along with the analysis of the effects of different performance parameter
CO4 Students will be able to do critical analysis and of the systems and suggests methods to
enhance the performance of the Energy Conversion systems

Course Articulation Matrix:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 2 2 1 1 1 1 1 3 3 3
CO2 2 2 2 1 1 1 1 1 3 3 3
CO3 3 3 3 2 3 2 1 1 1 1 3 3 3
CO4 3 3 3 2 3 2 1 1 1 1 1 3 3 3

Unit Details No. Hrs

1 Review of Carnot and Rankine cycle, Effect of operating conditions on thermal 8
efficiency of Rankine cycle, Principle methods of increasing thermal efficiency,
Deviation of actual cycle from theoretical cycle, Efficiencies, Requirement of
ideal working fluid, Binary vapour cycle, Regenerative feed heating cycles,
Reheating and regenerative cycles.
2 Classification of nozzles and diffusers. Steady flow energy equation through 7
nozzles, momentum equation. Nozzle and diffuser efficiencies. Principles of
working of steam turbines, classification comparison, and velocity diagram for
impulse and reaction turbines, losses in steam turbines, state point locus and reheat
factor.
3 Function of boilers, Classification of boilers, modern boilers, heat absorption in 5
water tube boilers, circulation in down comer-riser circuits and their sizing, steam
drum and internal, mountings and accessories, Function of condenser, condensing
system, surface and jet condensers, mass of circulating water, condenser and
vacuum efficiency, Cooling tower: construction details and analysis.
4 Engine Geometry, Performance Parameters, Air standard Cycle and their 8
Analysis, Fuel-air Cycle and their Analysis, Actual cycle and their analysis, Inlet
and exhaust processes in the four-stroke cycle, Valve timing diagram, Volumetric
efficiency, Scavenging in two-stroke cycle engines and supercharging and Turbo
charging. SI Engine combustion and CI Engine combustion.
5 Classification, Ideal Cycles and their analysis, Design Point Performance 6
Calculations, Comparative Performance of Practical Cycles, Combined Cycle and
Cogeneration Schemes, closed cycle gas turbines

Scheme and Syllabi 42 w.e.f.2022-23

 Department of Mechanical Engineering

Text Books:
1 Power Plant Engineering PK Nag McGraw Hill
2 Internal Combustion Engine Fundamentals Heywood, John B. McGraw-Hill

References:

1 Power Plant Technology M.M. El-Wakil McGrawHill

Internal Edition
2 Internal Combustion Engines, McGraw-Hill (India). Ganeshan, V. McGraw-Hill (India).

##

Scheme and Syllabi 43 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Energy Conversion Technologies Lab
MEN13101 0-0-2:1

Prerequisites: Concepts of Thermodynamics, Fluid Mechanics and Heat Transfer

Course Outcomes:

CO1 Students will be able to apply the concepts of thermodynamic, fluid mechanics and heat transfer

CO2 Students will be able to solve problems related to energy conversion techniques
CO3 Students will be able tocritically analyze the results and identify the problems in the systems
and rectify them
CO4 Students will be able to prepare the reports of experiments in a format that a technically
competent person can follow and obtain the similar findings.

Course Articulation Matrix:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 2 1 1 1 1 1 1 1 2 1 - 2 3
CO2 2 2 1 1 - - 1 - - 2 - - 2 1
CO3 2 2 1 3 1 1 2 - - 3 - 2 2 2
CO4 3 3 1 3 1 1 3 1 1 2 1 2 3 3

Exp. No. Details No.

Hrs
1. Study and performance of complete steam power plant 2
Study and performance of Nestler Boiler (To find the equivalent evaporation, Boiler 2
2.
efficiency and prepare the heat balance)
3. Study and performance of Steam Turbine 2
4. Study and performance of surface condenser 2
5. To find the dryness fraction of wet steam using separation throttling calorimeter 2

Study of 600 Rovers Gas Turbine and to draw the air fuel, lubrication and power 2
6.
cycles
7. Study of 2-Stroke and 4-stroke C.I. & S.I. Engine with valve timing diagram. 2
Disassembly of single cylinder Diesel Engine & Assembly of single cylinder Diesel 2
8. Engine.
9. Performance characteristic of multi-cylinder C.I. Engine. (Willan’s line method) 2
10. Performance characteristic of single cylinder diesel engine. 2
11. Study and performance characteristics of MPFI Engine and Morse test. 2

Scheme and Syllabi 44 w.e.f.2022-23

 Department of Mechanical Engineering

Text Books:
1 Power Plant Engineering PK Nag McGraw Hill
2 Internal Combustion Engine Heywood, John B. McGraw-Hill,.
Fundamentals

References:

1 Power Plant Technology M.M. El-Wakil McGraw Hill

Internal Edition
2 Internal Combustion Engines, Ganeshan, V. McGraw-Hill (India).
McGraw-Hill (India).

##

Scheme and Syllabi 45 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Fluid Mechanics and Hydraulic Machines
AMN13104 3-0-0:3

Prerequisite: NIL
Course Outcomes:
CO1 To give fundamental knowledge of fluid, its properties, hydrostatic laws and application
of mass, momentum and energy equation in fluid flow.
CO2 To develop understanding about Dimensional Analysis, different types of flows and
losses in a flow systems
CO3 To learn the importance of flow measurements and its applications in Industries.
CO4 To develop basic knowledge of hydraulic machines and its applications.

Course Articulation Matrix:

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2

CO1 3 2 1 1 1 - - - - - - 2 3 2
CO2 3 2 1 1 2 - - - - - - 1 3 2
CO3 - - 2 - 2 - - - - - - - 3 3
CO4 3 3 2 - - - - - - - - 2 3 3

Unit Contents Lecture

Hours
1 Introduction to Fluid Mechanics- Statics and Kinematics: Physical 08
properties of fluids, Rheology of fluids, Hydrostatic pressure on plane and
curved surfaces, centre of pressure, Kinematics of Fluid flow: Types of fluid
flows, Description of motion, continuity equation, stream function and
velocity potential, applications of potential flow.
2 Dynamics of Fluid Flow and Dimensional Analysis: Euler’s Equation of 08
motion, Bernoulli’s equation and its applications, Pitot tube, Orifice, Venturi,
nozzle and bend meter. Reynolds transport theorem, Momentum equation
(Navier-Stokes equation). Dimensional Analysis and similarity,
Buckingham’s Pi theorem, Important dimensionless numbers and their
physical significance.
3 Laminar and Turbulent Flows: Equation of motion for laminar flow 07
through pipes, Stokes law, isotropic and homogenous turbulence, scale and
intensity of turbulence, eddy viscosity, Prandtl’s mixing length theory,
velocity distribution in turbulent flow over smooth and rough surfaces, minor
losses, pipe in series and parallel.
4 Boundary Layer: Displacement, momentum and energy thickness, boundary 07
layer over a flat plate, Prandtl boundary layer equation, laminar and turbulent
boundary layer, application of momentum equation, separation and its control,
drag and lift, drag on a sphere, 2D cylinder and aerofoil, Magnus effect.
5 Introduction to Hydraulic Machines: Hydraulic Turbines: Introduction to 10

Scheme and Syllabi 46 w.e.f.2022-23

 Department of Mechanical Engineering

Hydroelectric power station and its components, Classification of turbines,

Heads and efficiencies, Pelton wheel, Francis and Kaplan turbines, specific
speed and unit quantities, Characteristic curves. Pumps: Centrifugal Pumps,
specific speed, priming, Characteristic curves, Reciprocating pumps,
Comparison between Centrifugal and Reciprocating pumps. Cavitation in
pumps and turbines.

Text Books:
1. Fox, R.W., McDonald, A.T., “Introduction to Fluid Mechanics, 7th edition”, Wiley India.
2. Som, S.K., Biswas G, and Chakraborty, S., “Introduction of Fluid Mechanics & Fluid
Machines”, TMH, New Delhi.
3. Milton Van Dyke, “Album of Fluid Motion”, Parabolic Press.

Reference Books:
1. F. M. White, “Fluid Mechanics,” 7th Edition, McGraw- Hill, India.
2. Shames, I.H., Mechanics of Fluids, McGraw Hill, International Students Edition.
3. Jagdish Lal, Fluid Mechanics, Metropolitan Book Company Ltd., Delhi.
4. Vijay Gupta and S.K.Gupta, ‘Fluid Mechanics and its Applications’, Wiley Eastern Ltd,
1984.

##

Scheme and Syllabi 47 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Fluid Mechanics and Hydraulic Machines Lab
AMN13104 0-0-2:1
Pre-requisites: NIL
Course Outcome

S.N. Outcomes
CO1 Students will be able to Understand engineering applications of basic fluid mechanics.
CO2 Students will be able to identify hydraulic machines types and components.
CO3 Students will be able to apply principles of fluid mechanics to analyse the performance of
Hydraulic machines.
Course Articulation Matrix:

CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 2 2 - 3 3 3 2 3 2 3 1
CO2 3 1 1 1 3 2 2 2 2 3 1
CO3 3 3 3 3 3 3 1 2 2 2 3 3 3

Unit Content
1 Experiment 1: To verify the momentum equation using the experimental set-up on
diffusion of submerged air jet.
2 Experiment 2: To study the boundary layer velocity profile over a flat plate and to
determine the boundary layer thickness.
3 Experiment 3: To study the transition from laminar to turbulent flow and to
determine the lower critical Reynolds number.
4 Experiment 4: To study the variation of friction factor ‘f ’ for turbulent flow in
commercial pipes.
5 Experiment 5: To calibrate an orifice meter, venture meter, and bend meter and
study the variation of the co-efficient of discharge with the Reynolds number.
6 Experiment 6: To study the impact of jets in a flat plate.
7 Experiment 7: To study performance of a Pelton wheel/ Francis turbine/ Kaplan
Turbine.
8 Experiment 8: To study performance of two Centrifugal pumps connected in series
and parallel.
9 Experiment 9: To study performance of a Reciprocating pump.

Text Books:
1. Singh, S. Experiments in Fluid Mechanics, PHI Learning, New Delhi.
2. Prakash, M. N. S., Experiments in Hydraulics and Hydraulic Machines: Theory and
Procedures, PHI Learning, New Delhi.
3. Majumdar, B., Fluid Mechanics with Laboratory Manual, PHI Learning, New Delhi.

Scheme and Syllabi 48 w.e.f.2022-23

 Department of Mechanical Engineering

References

1. “Instrumentation, Measurements & Experiments Fluids”, E. Rathakrishnan, CRC Press, NY,

2007.
2. “Low-Speed Wind Tunnel Testing”, A. Pope and J.J. Harper, John Wiley & Sons Inc., NY,
1966.
3. “Experimental Methods for Engineers”, J.P. Holman, McGraw-Hill Inc., NY, 2001.
th
4. “Design & Analysis of Experiments”, D.C. Montgomery, Wiley, 7 ed., 2009.

##

Scheme and Syllabi 49 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Industrial Engineering
MEN13103 3-0-0:3
Prerequisites: NIL
COURSE OUTCOME

S. N. Outcomes
CO1 Students will be able to identify and use the elements of cost, methods of depreciation and
investment techniques. Productivity, Productivity Measurements and develop
entrepreneurial attitude.

CO2 Students will be able to describe the job evaluation, merit rating and wage-incentive
plans.
CO3 Students will be able to iimplement work study techniques for better productivity and
learn to do work measurement and calculate the standard time for doing a job.
CO4 Students will be able to describe and use different material handling devices, repair and
maintenance methods.
CO5 Students will be able to learn and describe learn about Maintenance Management and
Probabilistic Failure causes.

Course Articulation Matrix:

Program Outcomes
CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 2 2 - - - 3 2 2 2 2 3
CO2 2 2 2 - - 1 2 2 2 2 3 2
CO3 3 2 2 1 - 1 2 2 2 1 2 3
CO4 3 2 2 2 2 - 3 2 2 2 2 2
CO5 2 2 2 - 2 1 3 2 2 2 3 3

Module Details No. Hrs

1. Introduction, Engineering Economy and Costing-Plant Location and Layouts, 8
Production Systems, Cost Analysis, Break-even Analysis, Methods of
Depreciation, Investment/Replacement analysis, Concepts of Production and
Productivity, Productivity Measurements.
2. Job evaluation, Benefits of Job evaluation, Methods of Job evaluation, Merit 12
Rating, Methods of Merit Rating, Requirements for success of Merit Rating
System, Objectives of a Good Wage-Incentive Plan, Basis of a Good Wage-
Incentive Plan, Types of Wage-Incentive Plans.
3. Work Measurement, Time Study, PMTS, Work Sampling, Method Study, 8
Micro Motion Study, Principles of Motion Economy.
4. Material Handling System- principles, types, and devices. 6
5. Maintenance Management- Probabilistic Failure and Repair Times, Preventive 4
Maintenance and Replacement, Total Preventive Maintenance, Concurrent
Engineering- steps and CE Environment.

Scheme and Syllabi 50 w.e.f.2022-23

 Department of Mechanical Engineering

Text/Reference Books
1. Turner, W.C., et. al., 1993, “Introduction to Industrial and System Engineering”, Prentice Hall.
2. Del Mar, Donald, “Operations and industrial management: designing and managing for
productivity”, McGraw-Hill,2007
3. Ralph M. Barnes, “Motion and Time Study: Design and Measurement of Work”, Wiley
Publishers
4. Chandler Allen Phillips, “Human Factors Engineering”, John Wiley and Sons, New York,

##

Scheme and Syllabi 51 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Heat and Mass Transfer
MEN13102 3-0-0:3

Prerequisites: Engineering Thermodynamics

Course Outcomes:

CO1 Understand the basic modes of heat and mass transfer.

CO2 Apply principles of heat and mass transfer to predict transfer coefficients
CO3 Analyze working of various heat transfer equipment
CO4 Design heat and mass transfer equipment.

Course Articulation Matrix:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 3 2 1 1 1 1 1 3 3 3
CO2 3 2 2 1 1 1 1 1 2 3 2
CO3 2 3 3 2 3 2 1 1 3 2 3
CO4 3 2 3 2 3 2 1 1 3 3 3

No.
Unit Details
Hrs
1 Introduction to Heat Transfer-Modes of Heat transfer; Conduction, convection 7
and radiation; Effect of temperature on thermal conductivity of materials;
Introduction to combined heat transfer mechanism.
Conduction-One-dimensional general differential heat conduction equation in
the rectangular, cylindrical and spherical coordinate systems; Initial and
boundary conditions.
Steady State one-dimensional Heat Conduction-Composite Systems in
rectangular, cylindrical and spherical coordinates with and without energy
generation; Thermal resistance concept; Analogy between heat and electricity
flow; Thermal contact resistance; Critical thickness of insulation.
Two dimensional steady state heat conduction-solution by Numerical
Relaxation method.
2 Fins-Heat transfer from extended surfaces, Fins of uniform cross-sectional 5
area; Errors of measurement of temperature in thermometer wells.
Transient Conduction-Transient heat conduction; Lumped heat capacity
method; Time constant; Unsteady state heat conduction in one dimension only,
Heisler charts.
3 Convective heat transfer fundamentals-Newton’s law of cooling, Types of 6
convective heat transfer, Laminar and Turbulent flows, Hydrodynamic
boundary layer, Thermal boundary layer, Non-dimensional numbers,
Buckingham Pi Theorem.
Forced Convection-Flow over a flat plate; Approximate integral boundary
layer analysis; Analogy between momentum and heat transfer in turbulent flow
over a flat surface; Mixed boundary layer; Flow across a single cylinder and a
sphere; Flow inside ducts; Empirical heat transfer relations; Relation between
fluid friction and heat transfer; Liquid metal heat transfer.
Natural Convection-Physical mechanism of natural convection; Buoyant force;

Scheme and Syllabi 52 w.e.f.2022-23

 Department of Mechanical Engineering

Empirical heat transfer relations for natural convection over vertical planes and
cylinders, horizontal plates and cylinders, and sphere; Combined free and
forced convection.
4 Thermal Radiation-Basic radiation concepts; Radiation properties of surfaces; 5
Black body radiation Planck’s law, Wein’s displacement law, Stefan
Boltzmann law, Kirchoff’s law; Gray body; Shape factor; Black-body
radiation; Radiation exchange between diffuse non black bodies in an
enclosure; Radiation shields; Radiation combined with conduction and
convection.
5 Heat Exchanger-Types of heat exchangers; Fouling factors; Overall heat 4
transfer coefficient; Logarithmic mean temperature difference (LMTD)
method; Effectiveness-NTU method; Compact heat exchangers.
6 Condensation and Boiling-Introduction to condensation phenomena; Heat 4
transfer relations for laminar film condensation on vertical surfaces and on
outside & inside of a horizontal tube; Effect of non-condensable gases;
Dropwise condensation; Heat pipes; Boiling modes, pool boiling; Hysteresis in
boiling curve; Forced convective boiling.
7 Introduction to Mass Transfer-Introduction; Fick's law of diffusion; Steady 3
state equimolar counter diffusion; Steady state diffusion though a stagnant gas
film.

Text Books:
1 Fundamentals of Heat & Mass Incropera F.P., Dewitt.D.P. John Wiley & Sons (Pvt). Ltd.
transfer
2 Heat and Mass Transfer (In SI Yunus A. Cengel TMH Education pvt. Ltd.
units) A practical approach
3 Heat and Mass Transfer PK Nag McGraw-Hill Education -
Europe

References:

1 Principles of Heat Transfer Frank Kreith McGraw-Hill Book co.

2 Fundamentals of Momentum, Heat James John Wiley &Sons (Pvt). Ltd.
and Mass Transfer R.Welty
3 Heat Transfer J.P. Holman McGraw-Hill International
edition
4 Heat Transfer: A Basic Approach Ozisik,N. McGraw-Hill Inc.,US

##

Scheme and Syllabi 53 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Heat and Mass Transfer Lab
MEN13102 0-0-2:1

Prerequisites: Engineering Thermodynamics

Course Outcomes:

CO1 Understand the basic modes of heat and mass transfer.

CO2 Apply principles of heat and mass transfer to predict transfer coefficients
CO3 Analyze working of various heat transfer equipment

Course Articulation Matrix:

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 3 3 2 1 1 1 1 1 3 3 3
CO2 3 2 2 1 1 1 1 1 2 3 2
CO3 2 3 3 2 3 2 1 1 3 2 3

Unit Details No. Hrs

1 Study of the heat transfer in pin fin apparatus. 3
2 Study of the heat transfer in natural convection apparatus. 3
3 Study of the heat transfer in the forced convection apparatus. 3
4 Study of the Stefan Boltzmann apparatus and estimation of Stefan Boltzmann 3
constant.
5 To estimate the thermal conductivity of metal bar. 3
6 Study of heat transfer through Heat pipe. 3
7 Study of emissivity measurement apparatus. 3
8 To estimate the thermal conductivity of insulating powder 3
9 Study of heat transfer in lagged pipe apparatus. 3
10 To estimate effectiveness in double pipe heat exchanger. 3

References:

1 Principles of Heat Transfer Frank Kreith McGraw-Hill Book co.

Fundamentals of Heat & Mass Incropera F.P., Dewitt. John Wiley & Sons (Pvt).
transfer D. P. Ltd.
2 Heat and Mass Transfer (In SI Yunus A. Cengel TMH Education pvt. Ltd.
units) A practical approach
3 Fundamentals of Momentum, James R.Welty John Wiley &Sons (Pvt). Ltd.
Heat and Mass Transfer
4 Heat Transfer J. P. Holman McGraw-Hill International
edition

##

Scheme and Syllabi 54 w.e.f.2022-23

 Department of Mechanical Engineering

Course Code: Credits:

Basic Electrical and Electronics
EE***** 2-0-2:3

Prerequisites: NIL
A. Course Outcomes
CO1 Acquire the basic knowledge of electrical circuit simplification along with various concepts
to simplify them
CO2 Acquire basic knowledge and general concepts related to 1-phase/ 3-phase AC circuits and
power, including its measuring procedure and applications
CO3 Acquire knowledge and be able to conceptualize general concepts related to static and
rotating electric machines along with their working and applications
CO4 Be able to understand general concepts of the working of power system along with general
domestic wiring including safe and economic use of electrical power
CO5 Be aware with the electronic devices and related basic concepts along with the number
system theory
Course Articulation Matrix:
CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 1 3 1 1 2 - 1 - - - - - 1 1
CO2 1 3 1 2 2 - 1 1 - - - - 1 1
CO3 2 1 1 1 1 - 1 - - - - 1 3 1
CO4 2 1 3 1 1 2 2 1 - - - 1 3 2
CO5 2 2 1 2 2 - 2 - - - - 1 1 1

Unit Contents Hours

1 DC Circuit Ohm’s Law, Kirchhoff’s Laws, Source Conversion, Star Delta
transformation, Network Theorems - Superposition theorem, Thevenin’s theorem,
Norton’s Theorem, Maximum Power Transfer Theorem
2 A.C. Circuit
Sinusoidal AC voltage, Average value, R.M.S. value, form factor and peak factor of
AC quantity, Concept of phasor, Power factor, impedance and admittance, Active,
reactive and apparent power, analysis of R-L, R-C, R-L-C circuit, 3-phase AC
Circuits: balanced and unbalanced supply and loads. Relationship between line and
phase values for balanced star and delta connections. 3-phase Power measurements.

3 Electrical Machines
Basics- construction, working and applications of transformer, DC machine, 3-
phase induction motor and synchronous machine. Losses in electrical machines.
4 Introduction to Power System and Electrical Safety
Basics of Power System (Generation, Transmission & Distribution-general layout).
Electrical safety, domestic wiring & electrical measurements, Electrical lightning
devices, Energy saving and star ratings, Basic principle of earthing.
5 Fundamental of Electronics:
Basic Electronics - Construction, working and V-I characteristics of diodes. SCR
and their applications. Transistors-(BJT, FET, MOSFET), Construction, working,
type of configuration, and characteristics Digital– number system, logic gates,
Karnaugh map

Scheme and Syllabi 55 w.e.f.2022-23

 Department of Mechanical Engineering

Text / Reference books

1. Vincent Del Toro, “ Electrical Engineering Fundamentals”
2. Smarajt Ghosh, “Fundamentals of Electrical & Electronics Engineering”, Second edition, PHI
Learning, 2007.
3. Metha V.K, RohitMetha, “Basic Electrical Engineering'', Fifth edition, Chand. S & Co. 2012.
4. Kothari.D.P and Nagrath.I.J, “Basic Electrical Engineering”, Second edition, Tata McGraw -
Hill, 2009.
5. Horowitz and Hill, “Art of Electronics”, Cambridge University Press.
6. Robert L. Boylestad and Louis Nashelsky “Electronic Devices and Circuit Theory” Tenth
Edition,Pearson Education, 2013

##

Scheme and Syllabi 56 w.e.f.2022-23