JP30

STANDARD SPECIFICATIONS
1. ENGINE
Perkins four stroke heavy duty high performance
industrial type diesel engine.

2. ENGINE FILTRATION SYSTEM

• Air filter
• Fuel filter
• Full flow lube oil filter
All filters have replaceable elements.

3. COOLING RADIATOR
Radiator and cooling fan, complete with safety guards,
designed to cool the engine at high ambient
temperatures (consult your dealer for de-ration factors)

4. EXHAUST SYSTEM
Heavy duty Industrial Exhaust Silencer

Silencer noise reduction level 16 (dB)

8.0 @ 50 Hz
Maximum allowable back pressure
10.0 @ 60 Hz

ENGINE ALTERNATOR CONTROL PANEL CIRCUIT BREAKER

® 5. CIRCUIT BREAKER TYPE
ABB 3 pole MCB. (4 pole is optional) (contd.)
Generating Set pictured (open) may include optional accessories

GENERATING SET MODEL (JP30) Ratings at 0.8 Power Factor ALTERNATOR DATA
Output Ratings Prime Standby Make Leroy Somer
400-415 V, 3 ph, 50 Hz, 1500 rpm 30.0 kVA 33.0 kVA Model TAL 042C
24.0 kW 26.4 kW No. of bearings 1
Insulation class H
Prime Power These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. 10% overload power at no load <2%
is available for 1 hour in 12 hours continuous operation.
Total Harmonic Content - on load <5%

Standby Power These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is
Ingress Protection IP23
permitted on these ratings. Excitation System SHUNT
STANDARD REFERENCE CONDITIONS Winding Pitch 2/3
Output ratings are presented at 25°C air inlet temperature, barometric pressure 100 kPa, relative humidity 30%. This generating set is designed to operate at high
ambient temperatures (up to 55°C), humidity (up to 99%) and higher altitudes. De-ration may apply, please consult your dealer for specific site ratings. AVR Model R120
Some of the specifications are not standard on all Genset models. Overspeed 2250 R.P.M.
Voltage Regulation (steady) ± 1%
ENGINE / TECHNICAL DATA Short Circuit Capacity -
Engine Make & Model Perkins 1103A-33G AREP or PMG Excitation System Available as Optional.
Governor Type Mechanical
Number of Cylinders & Arrangement 3 Vertical in line CONTROL PANEL (STANDARD)
Bore and Stroke mm 105 x 127 Make Deep Sea
Displacement / Cubic Capacity litres 3.3 Model DSE6120
Induction System Naturally Aspirated
Cycle 4 stroke The DSE6120 is an Auto Mains (Utility) Failure Control
Combustion System Direct Injection Module suitable for a wide variety of single diesel or
Compression Ratio 19.25:1 gas genset applications. It includes a backlit LCD
display which clearly shows the status of the engine
Rotation Clockwise view from front
all the times. This module can either be programmed
Cooling System Water - cooled using the front panel or by using the DSE
Frequency and Engine Speed 50Hz & 1500rpm configuration suite PC software.
Prime Standby
Metering and Alarm indications:
Gross Engine Power kW (hp) 28.2 (37.8) 31.0 (41.6) • Generator frequency
Fuel Consumption @ 50% load L/hr 4.07 - • Underspeed, Overspeed
• Generator volts (L-L, L-N)
@ 75% load L/hr 5.59 - • Generator current
@ 100% load L/hr 7.33 8.01 • Engine oil pressure
• Engine coolant temperature
Total Lubrication System Capacity litres 8.3 8.3
• Fuel level (Warning or shutdown) - Optional
Total Coolant Capacity (inc. radiator) litres 10.2 10.2 • Hours run counter
Exhaust Temperature: °C 500 520 • Battery volts
• Fail to start/stop
Radiator Cooling Air Flow (Min): m3/sec 0.88 0.88 • Emergency stop
Combustion Air Flow: m3/min 2.16 2.15 • Failed to reach loading voltage/frequency
• Charge fail
Exhaust Gas Flow: m3/min 5.7 5.8 • Loss of magnetic pick-up signal - Optional
• Low DC voltage
• CAN diagnostics and CAN fail/error

DIMENSIONS AND WEIGHT ( OPEN TYPE ) ISO 14001 / OHSAS 18001 ISO 9001:2015
Length cm Width cm Height cm Weight kg (wet) Fuel Tank litres BUREAU VERITAS BUREAU VERITAS
Certification Certification
175 72 124 813 111
wet weight = with lube oil and coolant JUBAILI BROS IS ISO9001, ISO14001 & OHSAS18001 CERTIFIED
 JP30
AN INSPIRED DESIGN TO MEET YOUR NEEDS

STANDARD SPECIFICATIONS
6. FUEL SYSTEM
On Generating Sets up to 650 KVA, the baseframe design is
incorporated with an integral fuel tank with a capacity of approx.
8 hours running at Full Load. The tank is supplied complete with
fill cap breather, fuel feed and return lines to the Engine and
drain plug.

7. ALTERNATOR
7.1 INSULATION SYSTEM
• The insulation system is Class H.
• All windings are impregnated in either a triple dip
thermosetting liquid, oil and acid resisting polyester varnish or
vacuum pressure impregnated with a special polyester resin.
• Heavy coat of antitracking varnish additional protection
against moisture or condensation.

7.2 AUTOMATIC VOLTAGE REGULATOR (AVR)

The fully sealed Automatic Voltage Regulator maintains the
Voltage Regulation at ±1%. Nominal adjustment by means of a
trim pot incorporated on the AVR.

7.3 MOTOR STARTING

An overload capacity equivalent to 300% of the Full Load
impedance at zero Power Factor can be sustained for 10
seconds, when PMG option is fitted.
Generating Set pictured (closed) may include optional accessories

8. MOUNTING ARRANGEMENT
SOUND ATTENUATED AND WEATHER PROTECTIVE ENCLOSURE 8.1 BASE FRAME
ROBUST /HIGHLY CORROSION RESISTANT CONSTRUCTION: The complete Generating Set is mounted as a whole on a heavy
duty fabricated steel Baseframe.
• Stainless steel locks and hinges
• Body made from galvanized steel components (2.0mm) treated with polyester powder coating
8.2 COUPLING
The Engine and Alternator are directly coupled by means of an
CONVENIENT ACCESS FOR MAINTENANCE: SAE flange. The Engine flywheel is flexibly coupled to the
• Full length extra wide doors on each side Alternator rotor.
• Radiator fill access plate
• Vertical hinged side door 180ᵒ opening rotation 8.3 ANTI-VIBRATION MOUNTING PADS
• Back door option also available Anti-Vibration pads are affixed between the Engine / Alternator
feet and the Baseframe thus ensuring complete vibration
TRANSPORTABILITY: isolation of the rotating assembly.
• Tested and certified single point lifting facility
• Dragging points at base frame 8.4 SAFETY GUARDS
The Fan & Fan Drive along with the Battery Charging Alternator
SECURITY AND SAFETY: are Safety Guard protected for personnel protection.
• Control panel viewing window in a lockable access door
9. FACTORY TESTS
• Emergency stop push button (red) fixed externally for quick access
• The Generating set is load tested before dispatch
• Cooling fan and battery charging alternator fully guarded
• All protective devices control functions and site load
• Fuel fill and battery can only be reached via lockable access doors conditions are simulated. The generator and it’s systems are
• Exhaust silencing system totally enclosed for operator safety checked before dispatch.

SOUND PRESSURE LEVEL: 10. EQUIPMENT FINISHING

• 80 - 85 dBA at 3 meters (standard) All mild steel components are fully degreased and painted with
• IP Rating IP45 powder coated paint to ensure maximum scuff resistance and
Customized enclosures with reduced Sound Pressure Levels available on demand durability.

DIMENSIONS AND WEIGHT ( CLOSED TYPE ) 11. DOCUMENTATIONS

Length cm Width cm Height* cm Weight kg (wet) Fuel Tank litres Operation & Maintenance manual, Circuit wiring diagrams and
220 97 149 1082 191 Commissioning / Fault Finding instruction leaflets are
*Excluding 100mm for the extension of the exhaust pipe and 100mm for center lifting point
accompanied with the Generator.
AVAILABLE OPTIONS & ACCESSORIES 12. QUALITY STANDARDS
We offer a range of optional features and accessories to tailor our generating sets to meet your power needs. The equipment meets the following standards: BS4999,
BS5000, BS5514 IEC 60034, VDE0530, NEMA MG 1.22 and ISO
OPTIONS ACCESSORIES
8528.
• A variety of generating set control and synchronizing panels • Genuine spare parts
• Additional protection alarms and shutdowns • Load banks 13. WARRANTY
• Water fuel seperator • Auxiliary fuel tanks All of the Generating Sets are covered under a warranty policy
• Water jacket heater • Manual & automatic transfer switches for a period of 12 months. Warranty of the equipment is in line
• Battery charger with manufacturers warranty terms & conditions.
For further information on all of the standard and optional features accompanying this product please contact your local dealer or visit www.JubailiBros.com (check warranty statement for more details, as it may vary for different countries)
All information in this document is substantially correct at time of printing and may be altered subsequently.

DUBAI ABU DHABI SHARJAH SHOWROOM JEBEL ALI

In line with continuous product development, we reserve the
T: +971 4 3242544 T: +971 2 5542966 T: +971 6 5554605 T: +971 4 8832023
right to change specifications without notice.
E: jbdubai@jubailibros.com E: jb.abudhabi@jubailibros.com E: jbsharjah@jubailibros.com E: jbdubai@jubailibros.com

2905/2023