CYNPOL HD0662UV
High Density Polyethylene Resin
Product Description
CYNPOL HD0662UV is a hexene copolymer high density polyethylene which is designed for injection molding applications
with high stiffness and good impact strength and excellent U.V. resistance.
Applications
Outdoor crates, storage boxes, pails.
Requirement meets
CYNPOL HD0662UV meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520
which is covering safe use of polyolefin articles intended for food contact.
Physical Properties
Property1 Test Method Unit Typical Value Reference
Melt Index ASTM D-1238 g/10min 6.5 2.16kg at 190 °C
Density ASTM D-4883 g/cc 0.962
Tensile Strength, Yield ASTM D-638 Mpa 29
Elongation, Break ASTM D-638 % >800
Flexural Modulus ASTM D-790 Mpa 1450
ESCR (100% Igepal) ASTM D-1693 hr 15
Notched IZOD Impact ASTM D-256 J/m 33 at 23°C
1
The technical information is based on compression molded specimens and data information herein refers to typical values. Since
conditions of product use is outside our control, we make no warranties and assume no liability in connection with any use of this
information.
For technical support & more information
Vinmar International Ltd
16825 Northchase Drive, Suite 1400, Houston, Texas 77060 USA T +1.281.618.1300 F +1.281.618.1398 www.vinmar.com
We makes no other representation or warranties, express or implied, including, without limitation, warranties of merchantability and fitness for a particular purpose, and expressly disclaims all other representations and warranties
and any and all other obligations or liabilities on the part of us. No person is authorized to give any other warranties or to assume any other liability on behalf of us unless made or assumed in writing by us.
Revised September 2017
