Media Converters | Product Information

IMC 200/2000 Series

Industrial PoE+ Media and Rate Converters

Powering remote devices Remote Power Cycle

Allied Telesis IMC200/2000 Series The IMC200/2000 Series supports
Industrial Media Converters (IMCs) the Remote Power Cycle feature. This
are ideal for powering remote devices, allows a remote administrator to log in
such as IP phones, video cameras and to the host switch device and disable
wireless Access Points (APs), which the switch port to which the IMC is
are more than 100m from a Power over attached, causing the PoE+ device to ‫ ۼ‬Converts speed as well as media type
Ethernet (PoE) switch. Each IMC can lose power. This allows administrators
provide up to 60W of PoE. to reset remote devices without ‫ ۼ‬Supports 802.3at, PoE+, 30W and
physically going to the location. LTPoE++, 4-pair up to 60W
The 2000T/SP and the 2000TP/SP ‫ ۼ‬Supplies up to 60W of PoE power
each feature a 10/100/1000T twisted- Jumbo frame support ‫ ۼ‬Supports 100 and 1000Mbps fiber SFP
pair port, and an SFP port which Many backbone switch products modules (IMC2000/SP)
supports and auto detects 100X and support the industry-standard IEEE
1000X optics. No switch configuration ‫ ۼ‬Auto MDI/MDI-X
802.1Q specification for Virtual
is needed. Allied Telesis offers a wide LANs (VLANs) which sends extra- ‫ ۼ‬Smart Missing Link (SML)
variety of SFPs featuring multimode, long data packets on the network. ‫ ۼ‬Remote Power Cycle
single mode and BiDi optics. The IMC200/2000 Series are fully ‫ ۼ‬Supports up to 10K jumbo frames
compatible with these long packets,
Models with a fixed fiber-optic port are ‫ ۼ‬Supports multi-mode fiber
enabling them to be used in modern
available with SC or LC connectors. networks. ‫ ۼ‬8K MAC address table
With these, you can achieve distances
‫ ۼ‬Store-and-forward switching mode
up to 2 km (100Mps) or 550 m Smart MissingLinkTM (SML)
(1000Mps). With the SFP model, you ‫ ۼ‬Transparent to IEEE 802.1Q packets
The SML feature monitors network
can achieve greater distances using a connections and provides a ‫ ۼ‬Standalone or DIN rail mount
long-range SFP. notification when a link fails, allowing ‫ ۼ‬Fanless for silent operation
administrators to quickly identify the
In addition to transmitting data, the source and location of failed links, and
twisted-pair port also injects power thus minimize downtime.
down the cable, allowing a remote PoE
powered device to operate without
any additional power source. All PoE+
devices (IEEE802.3at compliant) are
supported. All PoE+ devices support 10/100/1000T Twisted-Pair Port LEDs
802.3at, PoE+, LTPoE++ and 4-pair. LED COLOR DESCRIPTION
The PC200x PoE+ Series can deliver Green The port has established a link to a network device
up to 60W of power to the remote Left LED Blinking Green Activity
device.
Off The port has not established a link to a network device
Green The twisted-pair port is connected to a powered device and is providing power
PoE Power
Off The twisted-pair port is not supplying power to the network device

DIP Switch
FUNCTION POSITION DESCRIPTION
On Smart MissingLink feature is enabled
SML
Off Smart MissingLink feature is disabled
Off Auto Negotiate
100FD
On Forced 100-FD on copper

Remote PoE+ Off Turned off

Control On PoE power is forced off when fiber link goes down

617-000650- RevH
IMC200/2000 Series | Industrial PoE+ Media and Rate Converters

Fiber Port LEDs

LED COLOR DESCRIPTION
Green The port has established a link to a network device
LINK Blinking Green Activity
Off The port has not established a link with a network device

Operational Characteristics Receive Sensitivity Physical Characteristics

MAC address table 8K addresses IMC200 (SC) Min -32 dBm Dimensions 11.1 cm x 9.6 cm x 3.5 cm
Forwarding/ 1,488,000pps for 1Gbps Max -3 dBm (W x D x H) (4.4 in x 3.8 in x 1.4 in)
filtering rate 148,880pps for 100Mbps IMC2000 (SC) Min -17 dBm Weight 0.748 kg (1.65 lb)
14,880pps for 10Mbps Max -3 dBm
Latency 14.3μsec Safety
(64 byte packet, 100Mbps full-duplex) Power Characteristics UL 62368-1, EN 62368-1
Maximum packet 10,000 bytes size PoE 48-57VDC UL 60950-1 (UL mark)
PoE+ 51-57VDC CAN/CSA C22.2 No. 60950-1 (cUL mark)
Optical Characteristics Non-PoE 12-48VDC EN 60950-1 (TUV mark)
Wavelength 1310 nm IMC200 (SC) IP30
850 nm IMC2000 (SC) Power over Ethernet
Fiber cable IMC2000 (SC) Operating mode IEEE 802.3at, PoE+, 30W Electrical Approvals and Compliances
Up to 2 km (100Base-FX) on OM1/OM2 LTPoE++, 4-pair up tp 60W EMI/Emission & Stability
Up to 275 m (1000Base-SX) OM1 Maximum power 60W FCC Class A
Up to 550 m (1000Base-SX) OM2 EN55024 (immunity standard)
SFP See specific SFP, SMF datasheet Environmental Specifications EN55032 Class A
at www.alliedtelesis.com Operating temperature -40ºC to 70ºC (-40°F to 158°F) EN55035
Storage temperature -40ºC to 85ºC (-40°F to 180°F) VCCI Class A
Transmit Power Operating altitude Up to 3,048m (10k ft) RoHS
IMC200 (SC) Min -19 dBm Relative humidity 5% to 95% (non-condensing)
Max -14 dBm
IMC2000 (SC) Min -9.5 dBm
Max -4 dBm

Ordering Information Power Supplies Supported SFP Modules

IMC2000T/SP & IMC2000TP/SP
AT-IMC200T/SC-980 The following three models can use the below
10/100/1000T to 100FX (SC), 2 km, MMF, indus- power supplies: AT-SPTX/I
trial temperature, TAA compliant AT-IMC200T/SC-980 100 m, 10/100/1000T SFP, RJ-45, I-Temp
AT-IMC2000T/SP-980
AT-IMC200TP/SC-980 AT-IMC2000T/SC-980 AT-SPSX/I
10/100/1000T PoE+ to 100FX (SC), 2 km, MMF, 550 m, 1000SX SFP, LC, MMF, 850 nm, I-Temp
industrial temperature, TAA compliant AT-DRB15
15W, 24V Output DIN Rail Mount Power Supply AT-SPSX/E
AT-IMC2000T/SC-980 DIN rail mount 550 m, 1000SX SFP, LC, MMF, 850 nm, Ext. Temp
10/100/1000T to 1000SX/SC, 550 m MMF, indus-
trial temperature, TAA compliant AT-DRB50 AT-SPEX/E
50W, 48V Output DIN Rail Mount Power Supply 2 km, 1000EX SFP, LC, MMF, 1310 nm, Ext. Temp
AT-IMC2000TP/SC-980 DIN rail mount
10/100/1000T PoE+ to 1000SX /SC, 550 m MMF, AT-SPLX10/I
industrial temperature, TAA compliant The following three models can use the below 10 km, 1000LX SFP, LC, SMF, 1310 nm, I-Temp
power supply:
AT-IMC2000T/SP-980 AT-IMC200TP/SC-980 AT-SPLX10/E
10/100/1000T to 100/1000X SFP, industrial tem- AT-IMC2000TP/SC-980 10 km, 1000LX SFP, LC, SMF, 1310 nm, Ext. Temp
perature, TAA compliant AT-IMC2000TP/SP-980
AT-SPLX40/E
AT-IMC2000TP/SP-980 AT-DRB50* 40 km, 1000LX SFP, LC, SMF, 1310 nm, Ext. Temp
10/100/1000T PoE+ to 100/1000X SFP, industrial 50W, 48V Output DIN Rail Mount Power Supply
temperature, TAA compliant DIN rail mount AT-SPBD10
* Product will be limited to <50W 10 km, 1G BiDi SFP, LC, SMF

AT-SDR120-48 AT-SPBD20-xx/I
120W @48Vdc, Industrial AC/DC power supply, 20 km BiDi GbE SMF SFP, I-Temp
DIN rail mount
AT-SPBD40-xx/I
40 km BiDi GbE SMF SFP, I-Temp

All Allied Telesis standard temp SFP's

© 2024 Allied Telesis, Inc. All rights reserved.

617-000650 RevH