Miniature Pumps

Precision Fluidics
Innovative Solutions for Health Care Success

When you partner with the global leader in motion and control technologies, expect to move your business
and the world forward. From miniature solenoid valves to highly integrated automation systems, our
innovations are critical to life-saving medical devices and scientific instruments used for drug discovery
and pathogen detection. Not to mention, critical to decreasing time to market and lowering your overall
cost of ownership. So partner with Parker, and get ready to move, well, anything.

www.parker.com/precisionfluidics 1 800 525-2857

Table of Contents
Micro Pumps (air/gas) Page

Highly efficient and compact 13.5mm

T2-05 wide pumps - up to 800 mLPM 1

High efficiency to size ratio pumps -

T2-03 up to 2.5 LPM 9

High performance in a compact 20

CTS Series mm wide pumps - up to 2.5 LPM 16

Mini Pumps (air/gas)

Versatile dual and single head pump series

BTX-Connect for multiple applications - up to 11 LPM 25

Versatile dual and single head pump series

BTX-Brush for multiple applications - up to 6.1 LPM 45

Compact, efficient, low pressure

TTC Series pumps - up to 6LPM 58

Compact, efficient, low pressure

TTC-IIS Series Dual Head pumps - up to 11 LPM 68

Ultra compact, highly efficient

T2-04 pump - up to 7.5LPM 78

Mini Piston Pumps (air)

High pressure pump - over

Helix 5.5 LPM and up to 100 PSI 83

Mini Pumps (liquids)

Liquid series transfer pump -

LTC Series Up to 1.7 LPM Free Flow 91

Accessories

EZ Mount Vibration Isolation Mounting System 101

 1

T2-05 Micro Diaphragm Pumps (air/gas)

Up to 800 mLPM Free Flow

Parker’s T2-05 13.5 mm wide micro diaphragm pump is designed to

Miniature Pumps

fit where other pumps cannot due to its small, compact package size.
The T2-05 flow path is optimized to deliver high flow with high
efficiency resulting in extended battery life. The pump’s low power,
small size, and light weight play a critical role in portable gas
detection and medical applications.

Markets
• Safety Features
• Patient Therapy
• The valve design has been optimized to provide the highest flow rates
• Patient Monitoring
available with the lowest current draw, allowing for longer battery life
and smaller instrument size.
Applications
• The T2-05 model pump life ranges up to 10,000 rated hours depend-
• Portable Gas Detection
ing on motor (HE, LI and IC) options
• Gas Sampling
• Medical Instruments • The pump fits into the extremely tight spaces demanded of today’s
• Trace Detection handheld instruments, such as portable gas detectors and portable
• Sidestream CO2 negative pressure wound therapy devices for patient mobility. The
• Negative Pressure Wound Therapy lightweight design minimizes instrument weight.
• RoHS compliant.

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment : 1
Motor Type (DC): Head Configuration: Single
-4 to 122°F (-20 to 50°C) High Efficiency Coreless Brush (HE) Maximum Flow:
Storage Environment Low Inductance Coreless Brush (LI)
PMDC Iron Core Brush (IC) HE, LI: 800 smlpm, IC: 700 smlpm
-4 to 122°F (-20 to 50°C)
Nominal Motor Voltages (DC) : 4 Maximum Intermittent Pressure7:
Media:
1.9 to 4.5 Vdc 6.2 psi (430 mbar)
Air, Argon, Helium, Nitrogen, Oxygen,
and other non-reacting gases Electrical Termination: Maximum Continuous Pressure:
Humidity: HE: Wire Leads 2.0 psi (138 mbar)
LI: Wire Leads
Most non-condensing gases Maximum Intermittent Vacuum7:
IC: Solder Tabs or Wire Leads
5-95% Relative Humidity
10.8 in Hg (274 mm Hg)
Pump Assembly Rated Life3: Inductance6:
Maximum Continuous Vacuum:
Coreless Motor-Pump (HE): HE: 0.28 mH maximum @ 1kHz/50mV 4.1 in Hg (104 mm Hg)
Up to 10,000 hours LI: 0.05 mH maximum @ 1kHz/50mV
Coreless Motor-Pump (LI): IC: 4.07 mH maximum @ 1kHz/50 mV Filtration:
Up to 6,000 hours
PMDC Iron Core-Pump (IC): 40 micron recommended
Up to 1,500 hours Wetted Materials Efficiency at Free Flow8:
LPM/Watt: 4.66 @ 1.9 VDC
Weight: Valves: EPDM (P/N T5-1HE-03-1EEB)
LPM/Watt: 4.08 @ 1.9 VDC
(P/N T5-1LI-03-1EEB)
0.5 oz (14 g) HE and LI
Pump Head: ABS LPM/Watt: 3.12 @1.9 VDC
0.4 oz (11 g) IC (P/N T5-1IC-03-1EEP)
 2

T2-05 Micro Diaphragm Pumps (air/gas)

Performance Specifications

Miniature Pumps
T2‐05
T2-05Pump ‐ Coreless
Pump CorelessBrush Motor
Brush Motor
Vacuum (mm Hg) ‐ Pressure (bar)
254 203 152 102 51 0 0.07 0.14 0.21 0.28 0.35
900 0.50
800 0.45
intermittent duty 0.40
700
intermittent duty 0.35

Power Usage (W)

600
Flow (ml/m)

0.30
500 continuous duty
0.25
400
0.20
300
0.15
200 0.10
100 0.05
0 0.00
10 8 6 4 2 0 1 2 3 4 5
Vacuum (in Hg) ‐ Pressure (psig)
Max Flow‐4.5V Min Flow‐1.9V

Max Power‐4.5V Min Power‐1.9V

T2-05 PMDC
T2‐05 Pump Iron Iron
‐ PMDC CoreCore
Brush Motor
Motor
Vacuum (mm Hg) ‐ Pressure (bar)
400 300 200 100 0 0.13 0.27 0.40 0.35
800 0.60

700
0.50
600
0.40
500
FLOW (ml/m)

POWER (W)

intermittent duty intermittent duty

400 0.30

300
0.20
200
0.10
100 continuous
duty
0 0.00
‐500 16
‐400 12
‐300 8
‐200 4
‐100 00 2
100 4
200 6
300 8
400 500
Vacuum (In Hg) ‐ Prssure (psig)

Max Flow‐4.5V Min Flow‐2.5V

Max Power‐4.5V Min Power‐2.5V

The above graphs represent examples of performance for the pumps series handling air at 800 feet (244M) above sea level at 75° F (24° C). Performance
will vary depending on barometric pressure and media temperature. Curves are representative of standard pump configurations. Pump configurations
could be customized for higher or lower flows, depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations
 3

T2-05 Micro Diaphragm Pumps (air/gas)

Sizing and Selection

T2-05 Series Coreless Brush Motor Coreless Brush Motor PMDC Iron Core Motor
Miniature Pumps

(High Efficiency) (Low Inductance) (Iron Core)

Model HE LI IC

Inductance6 Better Best N/A

Efficiency at Free Flow8 Best Best Better

Life3 Best Better Good

Cost Good Better Best

Mounting Guidelines: Port Connections:

• Parker recommends using a nylon cable tie • HE & LI: 3/32" ID tubing
with a length of at least 4” (100 mm). • IC: 1/8" ID tubing

Mechanical Integration Dimensions

Coreless Brush/HE Version

3/32" Hose Barb Pressure

.532 .005
[13.5  .1]
3/32" Hose Barb Vacuum

.532  .005
[13.5 .1]

([32.6]
1.283
)
.155
.145
[ ]
3.9
3.7
.150
.140 .532

[ ]
3.8 [13.5]
3.6 .472
.467 .240
[ ]
12.0
11.9
[6.1]
.146  .005
[3.7  .1]
.910
.860
[ ]
23.1
21.8

.075 .544 .025

[1.9] [13.8  .6]

.605
.575
[ ]
15.4
14.6
.835 MAX
[21.2]

Units
IN. (mm.)
 4

T2-05 Micro Diaphragm Pumps (air/gas)

Mechanical Integration Dimensions

Coreless Brush/LI Version

Miniature Pumps
3/32" Hose Barb Pressure

.532  .005
[13.5 .1]

3/32" Hose Barb Vacuum

.532 .005
[13.5  .1]

.155
.145
[ ]
3.9
3.7
.150
.140 .532
[ ]
3.8
3.6
[13.5]

.240
[6.1]
.146 .005
[3.7  .1]
.910
.860
[ ]
23.1
21.8

.075 .544  .025

[13.8  .6]
[1.9]

.605
.575
[14.6
15.4
] 1.153
[29.3]

Units
IN. (mm.)

Mechanical Integration Dimensions

PMDC Iron Core/IC Version

1/8" Hose Barb Pressure

.532  .005
[13.5  .1]
1/8" Hose Barb Vacuum

.532  .005
[13.5 .1]

.155
.145 1.250
[ ]
3.9 .150 1.220
3.7 .140
[ ]
3.8
3.6
[ ]
31.8
31.0
.532
[13.5]

.146 .005
[3.7  .1]
.910
.860
[ ]
23.1
21.8
.472 .544  .025
[12.0] [13.8  .6]

.605
.575
[ ]
15.4
14.6 .787
[20.0]

Units
IN. (mm.)
 5

T2-05 Micro Diaphragm Pumps (air/gas)

Mechanical Integration
PMDC Iron Core/IC Version
Improved Sound Configuration*
Miniature Pumps

T2-05 PUMP/MITIGATION BOOT

.25 [6.3]

.71 [18.1]

.73 [18.5]
.65 [16.5] WHITE MARK ON MOTOR
CL INDICATES POSITIVE TERMINAL (+)
.12 [3.1]
.11 [2.7] 1.52 [38.7] .05 [1.35] MAX
CL

Ø.47 [Ø12.0]

.37 [9.4]
Ø.16 [Ø4.0]
Units
IN. (mm.)

NEGATIVE
.69 [15.0] .14 [3.6] TERMINAL (-)
.39 [10.0]
.95 [24.1] ACROSS FLATS
1.42 [36.0]

UNITS
IN. [mm.]
*The noise mitigation outlet cover is available for vacuum configuration only, with the PMDC Iron Core brush motor.

Electrical Integration and Motor Control

Coreless Brush Motor (HE, LI)
2 Wire Red (+), Black (-)
Wire specification 28 AWG 5.7” (145 mm) PVC Wire Leads

PMDC Iron Core Brush Motor (IC)

2 Wire Red (+), Black (-)
Wire specification 26 AWG 6.5” (165 mm) PVC Wire Leads

Key Things to Remember

Contact Parker Engineering for other connection requirements.
Pump life is highly dependent on operating conditions. It is not recommended to run the pump
continuously, 100% duty cycle, at higher than 2 psig.
The pump flow and pressure can be controlled by adjusting the input voltage from zero to maximum
rated voltage.
The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.
Pump orientation does not affect performance or life.
 6

T2-05 Micro Diaphragm Pumps (air/gas)

Typical Flow Diagram

Negative Pressure Wound Therapy Diagram

Miniature Pumps
T2-03 PUMP DIAGRAM

Gas Detection Diagram

DISPLAY / ALARM

FILTER
IN FROM
ATMOSPHERE
T2-05
PUMP

SENSOR BOARD OUT TO

ATMOSPHERE
Side Stream Capnography Diagram
SIDE STREAM CAPNOGRAPHY DIAGRAM

CO2 SENSOR

X-VALVE

IN FROM
PATIENT
FILTER
APPLICATION T2-05
SPECIFIC PUMP
RESTRICTOR
 7

T2-05 Micro Diaphragm Pumps (air/gas)

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Compatibility Legend
Miniature Pumps

Path Materials
1. EXCELLENT
Chemical EPDM ABS PBT Minimal or no effect
Air 1 1 1 2. GOOD
Ozone (1000 ppm) 4 2 1 Possible swelling and/or
loss of physical properties
Oxygen 1 1 1
3. DOUBTFUL
Ethylene (Ethene) 4 1 1
Moderate or severe swell-
Acetylene 1 2 2 ing and loss of physical
Propane 4 2 2 properties
Methane 4 4 2 4. NOT RECOMMENDED
Nitrogen 1 1 1 Severe effect and should
Carbon Dioxide 2 2 1 not be considered

Halothane (Up to 5%) 4 1 1 Note: Consult factory for

other gases.
*The above is an Abbreviated Chemical Compatibility Chart. Please
consult factory for details.

Ordering Information
Free
Part Number Vacuum: LPM @ Load Pressure: LPM @ Load Motor Type
Flow
8 in Hg 4 in Hg 2 psig 4 psig
0
203 mm Hg 102 mm Hg 134 mbar 276 mbar
T5-1HE-03-1EEB 0.2 0.5 0.8 0.6 0.3 HE - Coreless Brush
T5-1LI-03-1EEB-1 0.2 0.5 0.8 0.6 0.3 LI - Coreless Brush
T5-1IC-03-1EEP 0.2 0.5 0.7 0.5 0.3 IC - Iron Core Brush
T5-VBIC-03-1EEP 0.2 0.5 0.7 IC - Iron Core Brush
T5-1ICW-03-1EEP IC - Iron Core Brush
0.2 0.5 0.7 0.5 0.3
with Wire Leads
 8

T2-05 Micro Diaphragm Pumps (air/gas)

Ordering Information
Please refer to sizing and selection chart for identifying which one will fit your application

Miniature Pumps
To order on-line go to www.parker.com/precisionfluidics/t5 and configure your T2-05 Micro Diaphragm Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific
application requirements. Providing information on the following requirements will assist us in developing an
optimal solution for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to tailor
the pump configuration when noise is a critical criterion in the effort to meet the performance requirements of the
application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels possible
depending on application.
6. Inductance is an indicator of induced voltage with change in current and it is a key parameter to enable customers’
low energy intrinsic safety systems
7. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the factory
or Applications Engineering.
8. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
 9

T2-03 Micro Diaphragm Pumps (air/gas)

Up to 2.5 LPM Free Flow
T2-03 micro diaphragm pump series is ideal for higher performance,
fixed and portable air and gas detection, and medical applications
requiring flow up to 2.5 lpm. T2-03 pumps are proven in fixed and
portable applications for sampling of hazardous gases and vapors
Miniature Pumps

typical of industrial and mining operations.

Features
• The valve design has been optimized to provide the highest flow rates
available with the lowest power draw in this package size. Lower
power results in longer battery life and smaller instrument size.
• The wear components of these pumps have been designed to provide
Applications maximum life. Many applications for these pumps require 10,000+
• Gas Sampling hours of operation.
• Fixed Gas Detectors • The pumps fit into the extremely tight spaces demanded of today’s
• Medical Instruments handheld instruments, such as portable gas detectors and portable
• Aerosols and Particle Analysis instruments such as handheld gas detectors and medical devices. The
• Combustion Analyzers lightweight design minimizes instrument weight.
• RoHS compliant.
Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment1 Motor Type: Head Configuration:
32 to 122°F (0 to 50°C) PMDC Iron Core Brush, Single
Coreless Brush Maximum Flow:
Storage Environment:
Nominal Motor Voltages4: 2.5 LPM
14 to 122°F (-10 to 50°C)
4, 5.6, 8.3, 12.4 VDC Maximum Continuous Pressure:
Humidity: 2 psi (138 mbar) - eCompact PMDC Iron
Max Power at Nominal Voltage:
5-95% Relative Humidity Core Brush, Compact Coreless
eCompact - PMDC Iron Core Brush Brush Motor
Noise Level2: 8 psi (555 mbar) - HP Coreless
2.4 Watts ( 298 mA @ 8VDC) Brush Motor
As low as 45dB
Compact - Coreless Brush Motor Maximum Continuous Vacuum:
Pump Assembly Rated Life3: 2.3 Watts (386 mA @ 6 VDC)
eCompact PMDC Iron Core Brush
eCompact - 5,000 hrs HP - Coreless Brush Motor
4 inHg (102 mmHg)
Compact - 10,000 hrs 0.7 Watts (88 mA @ 8 VDC)
Compact Coreless Brush Motor
HP - 10,000 hrs Electrical Termination: 4 inHg (102 mmHg)
Pressure and speed dependent.
HP Coreless Brush Motor
PMDC Iron Core Brush -
Weight: 12 inHg (305 mmHg)
Solder Tabs
1.2 oz. (33 g) eCompact Filtration:
Coreless Brush - 5.7 in (145 mm)
1.2 oz. (33 g) Compact Wire Leads 40 micron recommended
1.5 oz. (42 g) HP
Current Range :5
Efficiency at Free Flow8:
Wetted Materials 18 - 411 mA eCompact PMDC Iron Core Brush Motor:
Diaphragm: 3.56 LPM/Watt (P/N: T3EP-1ST-05-3FFP)
Inductance6: Compact Coreless Brush Motor: 11.92
Neoprene, EPDM, FKM eCompact: LPM/Watt (P/N: T3CP-1HE-04-2SEB)
Valves: 18.64 mH max@1kHz/50mV HP Coreless Brush Motor: 15.28 LPM/
Compact: Watt (P/N: T3HP-1PD-12-1SNP)
Silicone, FKM 0.47 mH max@1kHz/50mV
HP:
Pump Head: 3.4 mH max@1kHz/50mV
ABS, PPS
* See Appendix A for details.
 10

T2-03 Micro Diaphragm Pumps (air/gas)

Performance Specifications

T2-03 e-Compact - PMDC IronMotor

Core Motor

Miniature Pumps
T2‐03 e‐Compact ‐ PMDC Iron Core
Vacuum (mm Hg) ‐ Pressure (bar)
508 457 406 356 305 254 203 152 102 51 0 0.07 0.14 0.21 0.28 0.35 0.41 0.48 0.55 0.62 0.69 0.76 0.83
3.0 3.00
continuous
duty
2.5 intermittent duty intermittent duty 2.50

Power Usage (W)

2.0 2.00
Flow (LPM)

1.5 1.50

1.0 1.00

0.5 0.50

0.0 0.00
‐20 ‐18 ‐16 ‐14 ‐12 ‐10 ‐8 ‐6 ‐4 ‐2 0 1 2 3 4 5 6 7 8 9 10 11 12

Vacuum (in Hg) ‐ Pressure (psig)

Max Flow‐8.0V Min Flow‐2.5V

Max Power‐8.0V Min Power‐2.5V

T2-03 CompactPump
T2‐03 Compact Pump - Coreless
‐ Coreless BrushBrush
MotorMotor
Vacuum (mm Hg) ‐ Pressure (bar)
457 406 305 254 203 152 102 51 0 0.07 0.14 0.21 0.28 0.35 0.41 0.48 0.55 0.62 0.69 0.83
3.0 3.00

2.5 intermittent duty 2.50

Power Usage (W)

2.0 2.00
Flow (LPM)

continuous
duty intermittent duty
1.5 1.50

1.0 1.00

0.5 0.50

0.0 0.00
‐18 ‐16 ‐12 ‐10 ‐8 ‐6 ‐4 ‐2 0 1 2 3 4 5 6 7 8 9 10 12
Vacuum (in Hg) ‐ Pressure (psig)

Max Flow ‐ 6V Min Flow ‐2V

Max Power ‐ 6V Min Power ‐ 2V

T2-03
T2‐03 HPHP - Coreless
‐ Coreless BrushBrush
Motor Motor
Vacuum (mm Hg) ‐ Pressure (bar)
508 457 406 356 305 254 203 152 102 51 0 0.07 0.14 0.21 0.28 0.35 0.41 0.48 0.55 0.62 0.69 0.76 0.83
3.0 1.20
intermittent continuous
2.5
duty duty 1.00
Power Usage (W)

2.0 0.80
intermittent
Flow (LPM)

duty
1.5 0.60

1.0 0.40

0.5 0.20

0.0 0.00
‐20 ‐18 ‐16 ‐14 ‐12 ‐10 ‐8 ‐6 ‐4 ‐2 0 1 2 3 4 5 6 7 8 9 10 11 12
Vacuum (in Hg) ‐ Pressure (psig)

Max Flow‐12V Min Flow‐6V

Max Power‐12V Min Power‐6V

The above graphs represent examples of performance for the pumps series handling air at 800 feet (244M) above sea level at 75° F (24° C). Performance will
vary depending on barometric pressure and media temperature. Curves are representative of standard pump configurations. Pump configurations could be
customized for higher or lower flows, depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 11

T2-03 Micro Diaphragm Pumps (air/gas)

Sizing and Selection

T2-03 PMDC Iron Core Brush Coreless Brush Motor Coreless Brush Motor
Miniature Pumps

Series Motor (eCompact) (Compact) (HP)

eCompact Compact HP
Inductance6 Good Best Better
Efficiency at Free Flow8 Good Better Best
Life3 Good - 5,000 hours Best - 10,000 hours Best - 10,000 hours
Size/Weight Better Best Good
Cost Best Better Good

Mounting Guidelines: Port Connections:

• For eCompact, Parker recommends mounting • Barbs are sized for 1/8” ID tubing, 70-80
with (2) #1 screw or using a nylon cable tie durometer recommended.
with a length of at least 4” (100 mm) • Flow direction is marked on the pump head
• For Compact & HP, Parker recommends with arrows.
using a nylon cable tie with a length of at
least 4” (100 mm)

Mechanical Integration
T2-03 PUMP/E-COMPACT VERSION
Dimensions
1.76
[44.7]

1.21
[30.7]
PMDC Iron Core Brush
Motor (eCompact)

.11 [2.8] .95 [24.1] .16 [4.1]

.37 [9.4] .32 [8.1]

1.32
[33.5] POSITIVE
TERMINAL
INDICATOR
.63 [16.0] .24 [6.1] 3X Ø.09 [Ø2.3] UNITS

FOR SCREW SIZE #1 IN. [mm.]

 1.21 .16 [4.1]
.37 [9.4]
[30.7]
.32 [8.1]

.79 [20.1] 12
.24 [6.1]

T2-03 Micro Diaphragm Pumps (air/gas)

R.32 [R8.1]
UNITS

2.28 [57.9] IN. [mm.]

Dimensions T2-03 PUMP/COMPACT VERSION

1/8" [3.2] HOSE BARB (DISCHARGE)

Miniature Pumps
Coreless Brush Motor 1/8" [3.2] HOSE BARB (SUCTION)
(Compact)
.59 [15.0]
1.21 .16 [4.1]
.37 [9.4]
[30.7]
.32 [8.1]

.79 [20.1]
.24 [6.1]

R.31 [R7.9] UNITS

1.64 [41.7] IN. [mm.]

T2-03 PUMP/E-COMPACT VERSION

1.76
[44.7]
1.21
T2-03 PUMP/HP VERSION
[30.7]

1/8" [3.2] HOSE BARB (DISCHARGE)

Ø.59 [Ø15.0]

.11 [2.8] .95 [24.1] .16 [4.1]

1/8" [3.2] HOSE BARB
.37 [9.4] .32 [8.1]
(SUCTION)
.59 [15.0]
Coreless Brush 1.21
.37 [9.4]
1.32
.16 [4.1]
[30.7]
Motor (HP) [33.5] .32 [8.1] POSITIVE
TERMINAL
INDICATOR
.79 [20.1]
.63 [16.0] .24 [6.1] .24 [6.1] UNITS
Ø.09 [Ø2.3] IN. [mm.]

UNITS
R.32 [R8.1] IN. [mm.]
2.28 [57.9]

T2-03 PUMP/COMPACT VERSION

1/8" [3.2] HOSE BARB (DISCHARGE)

Electrical Integration and Motor Control

If application requires variable flow, motor control options
1/8" [3.2] HOSEare
BARBavailable,
(SUCTION)as follows:

PMDC Iron Core Brush Motor (eCompact) .59 [15.0]

1.21 .16 [4.1]
.37 [9.4]
2 Solder Tabs Positive terminal
[30.7] marked on pump motor
.32 [8.1]

Coreless Brush Motor (Compact & HP)

.79 [20.1]
.24 [6.1]
2 Wire Red (+), Black (-)
Wire specification 28 AWG Wire lead length 5.7” (145 mm)
R.31 [R7.9] UNITS
1.64 [41.7] IN. [mm.]

T2-03 PUMP/E-COMPACT VERSION

1.76
[44.7]

1.21
 13

T2-03 Micro Diaphragm Pumps (air/gas)

Electrical Integration and Motor Control cont’d

Key Things to Remember
Miniature Pumps

5” (127 mm) flying Leads are the standard electrical connection method to the pump (eCompact
standard connection is tabs). Contact Applications for other connection requirements.
The pump lead wires are non-polarized.
The pump can be controlled by DC voltage or PWM. The minimum recommended PWM frequency is 20kHz.
The pump flow and pressure can be controlled by adjusting the input voltage from zero to maximum
rated voltage.
The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.
Pump orientation does not affect performance or life.

Typical Flow Diagram

Hand Held Gas Detection
T2-03 PUMP DIAGRAM

DISPLAY / ALARM

FILTER
IN FROM
ATMOSPHERE
T2-03
PUMP

SENSOR BOARD
OUT TO
ATMOSPHERE
 14

T2-03 Micro Diaphragm Pumps (air/gas)

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Path Materials Compatibility Legend
1. EXCELLENT

Miniature Pumps
Neoprene
Chemical FKM EPDM ABS PPS Silicone Minimal or no effect
Rubber(CR)
Air 1 1 1 1 1 1
2. GOOD
Ozone (1000 ppm) 4 4 2 3 1 1 Possible swelling and/or
Oxygen 1 1 1 1 1 2 loss of physical properties
Ethylene (Ethene) 1 4 - 1 1 4
3. DOUBTFUL
Acetylene 1 1 2 2 1 3 Moderate or severe swell-
Propane 1 4 2 1 1 4 ing and loss of physical
Methane 1 4 4 2 1 4 properties
Nitrogen 1 1 1 1 1 1 4. NOT RECOMMENDED
Carbon Dioxide 1 2 2 1 1 2 Severe effect and should
Halothane (Up to 5%) 1 4 1 4 1 4 not be considered
*The above is an Abbreviated Chemical Compatibility Chart. Please Note: Consult factory for
consult factory for details. other gases.

Ordering Information
T2-03 Micro Pumps
Vacuum: Free Pressure:
Configuration
LPM @ Load
FF
Flow LPM @ Load
Max PCD1 Wetted Materials2

18 16 12 8 4 2 4 6 8 10
in Hg in Hg in Hg in Hg in Hg psig psig psig psig psig Vac Press Motor Diaphragm, Valves,
0 VDC mA
134 276 414 552 689
in Hg psig Type Gasket
457 406 305 203 102
mm Hg mm Hg mm Hg mm Hg mm Hg mbar mbar mbar mbar mbar
Coreless
T3CP-1HE-04-1SNB 0.3 0.9 2.5 1.1 0.5 8.6 4.5 4 313 CR, VMQ, CR
Brush
Coreless
T3CP-1HE-04-2SEB 0.1 0.3 1.1 0.5 0.2 10.4 5.5 4 103 EPDM, VMQ, CR
Brush
Coreless
T3CP-1HE-06-1SNB 0.6 1.2 2.8 1.5 0.8 0.5 12.2 6.5 6 317 CR, VMQ, CR
Brush
PMDC
T3EP-1ST-05-3FFP 0.3 0.6 0.8 1.5 1.2 0.7 0.6 0.4 16.7 11.7 5.6 411 FKM
Brush
PMDC
T3EP-1ST-08-1SNB 0.2 0.6 0.7 1.3 2.5 1.6 1.2 0.7 0.6 20.8 10.5 8.3 385 CR, VMQ, CR
Brush
Coreless
T3HP-1PD-12-1SNP 0.2 0.4 0.7 1.0 2.5 1.3 0.9 0.7 0.4 0.3 18.0 12 12.4 97 CR, VMQ, CR
Brush

1. PCD: Peak Current Draw 2. CR: Neoprene, VMQ: Silicone, FKM: Fluorocarbon, EPDM: Ethylene Propylene Diene Monomer

To order on-line go to www.parker.com/precisionfluidics/t3 and configure your T2-03 Micro Diaphragm Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific application
requirements. Providing information on the following requirements will assist us in developing an optimal solution
for your application:
• Noise • Size
• Operating Pressure / • Motor Control
Vacuum • Media
• Power Consumption • Voltage
• Life Requirement

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.
 15

T2-03 Micro Diaphragm Pumps (air/gas)

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
Miniature Pumps

1. Duty Dependent. For operation above 122°F (50°C) consult factory

2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to tailor
the pump configuration when noise is a critical criterion in the effort to meet the performance requirements of the
application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels possible
depending on application.
6. Inductance can be used to measure the viability of a component in a device requiring intrinsic safety.
7. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the factory
or Applications Engineering.
8. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
 16

CTS Series Micro Diaphragm Pumps (air/gas)

2.5 LPM Free Flow
Parker’s CTS Micro Diaphragm Pump Model delivers up to 2.5 slpm
of flow into a compact 20 mm wide package. Configurable with
three different motors to meet your application’s specific needs and

Miniature Pumps
life expectations

Features
• CTS Series Pumps set the highest benchmark for life-expectancy
with our advanced proprietary diaphragm elastomer.
• CTS Series Pumps have a unique, compact, and lightweight design
making it ideal for portable applications.
Applications • Our 100% oil and grease-free pump and compressor design main-
• Gas Analyzers tains the purity of your system and are commonly used in
• Patient Monitoring FDA-approved systems.
• CO2 Monitors
• CTS Series Pumps are uniquely balanced to minimize noise and
• Compression Therapy
vibration and to maximize life.
• Negative Pressure Wound Therapy
• Surgical Instruments • RoHS compliant.
• Medical Consumer Devices

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment1: Motor Type (DC): Head Configuration:
41 to 122°F (5 to 50°C) PMDC Iron Core Brush Single
Storage Environment: Coreless Brush Maximum Unrestricted Flow:
-4 to 212°F (-20 to 100°C) Brushless Slotless 2.5 LPM (See Performance Specifications)
Media: Nominal Motor Voltages4: Pressure Range:
Air, Argon, Helium, Nitrogen, Oxygen, PMDC Iron Core Brush: 0 - 24 psig (0 - 1.65 bar)
and other non-reacting gases 6, 9, 12 Vacuum Range:
Humidity: Coreless Brush: 6, 9, 12, 24 VDC 0 - 20 in Hg (0 - 508 mm Hg)
0 – 80% Relative Humidity Brushless Slotless: 6, 9, or 12 VDC Filtration:
Pump Assembly Rated Life3 : Other voltages available upon request.
40 microns - recommended
PMDC Iron Core Brush - Max Power at Nominal Voltage:
up to 1,500 hrs See Performance
Specification Curves
Coreless Brush - up to 3,000 hrs
Brushless Slotless - > 10,000 hrs Electrical Termination:
Weight: Iron Core Brush: Metal Terminals
1.7 oz. (48 g) PMDC Iron Core Brush Brush: 24 AWG Wire Leads,
Length 20" (508 mm)
1.6 oz. (45 g) Coreless Brush
Brushless Slotless: 24 AWG Wire Wetted Materials
2.2 oz. (62 g) Brushless Slotless
Leads, Length 20" (508 mm)
Diaphragm:
EPDM, AEPDM, FKM
Valves:
EPDM, AEPDM, FKM
Pump Head:
PSU (Polysulfone)

* See Appendix A for details.

 17

CTS Series Micro Diaphragm Pumps (air/gas)

Performance Specifications
CTS CTS - PMDC
- PMDC Iron Core
IRON CORE Brush
BRUSH MOTOR
Miniature Pumps

V ac u um (mm H g) - P ressure (bar)

508.0
12 406.0
8 304.8
4 203.2
0 101.6
4 80 0.28
12 0.55 0.83 1.10 1.38
3.0 3.5

2.5 3.0

P ow er U s a ge ( W )
Flo w ( LPM ) 2.5
2.0
2.0
1.5
1.5
10
1.0
1.0

0.5 0.5

- 0.0
20 16 12 8 4 0 4 8 12 16 20
V a c u u m ( i n H g) - P ressu re (psig)
Max Flow Min Flow
Max Power Min Power

CTS- CORELESS
CTS - Coreless BRUSH
Brush Motor
MOTOR
V ac uu m ( m m H g) - P r essure (bar)
304.8
12 203.2
8 101.64 00 0.28
4 0.55
8 0.83
12
2.0 1.4

1.2

P ower Usage (W)

1.5
1.0
Fl ow (LP M)

0.8
1.0
0.6

0.4
0.5
0.2

- -
12 8 4 0 4 8 12
V a c uu m ( in H g ) - P r e s su r e ( p s i g)
Max Flow Min Flow
Max Power Min Power

CTS - Brushless Slotless Motor

Power Flow
The above graphs represent an example of performance for the pump series handling air at 800 feet (244 m) above sea level at 75°F (24°C).
Performance will vary depending on barometric pressure and media temperature. A variety of configurations can be accommodated to meet application
requirements. Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows
depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 18

CTS Series Micro Diaphragm Pumps (air/gas)

Sizing and Selection

CTS PMDC Coreless Brushless
Series Iron Core Brush Brush Motor Slotless Motor

Miniature Pumps
PMDC Iron Core Brush Coreless Brush Motor Brushless Slotless Motor
Efficiency1 Good Best - Brush Motor Efficiency Better
Up to 90% motor efficiency Up to 75% motor efficiency

Life2 Good - up to 1,500 hrs Better - up to 3,000 hrs Best - 10,000 hrs
Cost Best Better Premium
Noise Good Better Best
See Appendix A for details.

Mounting Guidelines: Port Connections:

• Mounting may be accomplished by using dou- • Barbs are sized for 1/8" (3 mm) ID tubing,
ble-sided tape or wire zip ties secured to the 70-80 durometer recommended.
motor housing or using a nylon cable tie with a • Flow direction is marked on the pump head
length of at least 4” (100 mm). with arrows.
• Hole in the center of the bottom of housing
is for manufacturing only–not to be used
for mounting.
Mechanical Integration
Dimensions

PMDC Iron Core Brush

 19

CTS Series Micro Diaphragm Pumps (air/gas)

Mechanical Integration
Dimensions
Miniature Pumps

Coreless Brush Motor

Brushless Slotless Motor

 20

CTS Series Micro Diaphragm Pumps (air/gas)

Electrical Integration and Motor Control

PMDC Iron Core Brush Motor
Metal Terminals Polarity of the terminals is marked on the motor with the red dot marking

Miniature Pumps
the positive terminal.
Coreless Brush Motor
2 Wire Red (+), Black (-)
Wire specification 24 AWG, Insulation OD 0.038 in (0.97 mm), 20” (508 mm) Wire Leads
Brushless Slotless
2 Wire Red (+), Black (-)
Wire specification 24 AWG, Insulation OD 0.042 in (1.07 mm), 20” (508 mm) Wire Leads

Key Things to Remember

The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.
Onboard PWM control is not provided with this pump.
Pump orientation does not affect performance or life.

Typical Flow Diagram

Compression Therapy Prevention (DVT)

Pick-up Head
 21

CTS Series Micro Diaphragm Pumps (air/gas)

Typical Flow Diagram

Negative Pressure Wound Therapy (NPWT)
Miniature Pumps

FILTER
OUT TO
ATMOSPHERE

X-VALVE

CHECK VALVE
CTS
VENT TO
PUMP
ATMOSPHERE

PNEUMATIC PUMP WOUND

DRESSING
LIQUID
ISOLATION
FILTER

WASTE
CANISTER

Breast Pump
PNEUMATIC PUMP
X-VALVE

CTS PUMP

OUT TO
ATMOSPHERE
FILTER
 22

CTS Series Micro Diaphragm Pumps (air/gas)

Ordering Information
Speed at -16 -12 -8 -4 0 4 8 12

Miniature Pumps
inHg inHg inHg inHg Free PSIg PSIg PSIg
Configuration Voltage Nominal Volt- Part Number -406 -305 -203 -102 Flow 276 552 827
age mmHg mmHg mmHg mmHg mbar mbar mbar

CTS 6 3940 E155-11-060 - 0.15 0.32 0.52 0.78 0.48 0.29 0.14
Iron Core Brush
9 6050 E163-11-090 - 0.19 0.52 0.80 1.53 0.82 0.46 0.19
Motor
12 8460 E155-11-120 - 0.27 0.81 1.24 1.73 1.18 0.66 0.35

6 7310 E161-11-060 - 0.20 0.65 1.00 1.78 1.01 0.54 0.15

6 5000 E265-13 - - - - 1.60 1.20 0.90 0.70

9 7350 E107-13-090 - - - - 2.50 1.70 1.40 0.90

12 7570 E129-13-120 - - - - 2.60 1.80 1.40 1.00

6 4850 E107-12-060 0.22 0.47 0.74 1.08 1.88 - - -

6 6600 E253-12 - 0.90 1.30 1.70 2.30 - - -

12 7900 E129-12-120 0.50 0.90 1.40 1.90 2.50 - - -

9 7450 E107-12-090 0.50 0.90 1.30 1.90 2.60 - - -

CTS 5 2800 E134-11-050 - 0.10 0.21 0.35 0.54 0.31 0.16 -

Coreless Motor
6 6700 E164-11-060 - 0.26 0.58 0.96 1.36 0.88 0.54 -

9 8350 E165-11-090 - 0.35 0.73 1.10 1.60 1.10 0.75 0.46

12 7000 E134-11-120 - 0.20 0.60 0.90 1.70 0.90 0.45 0.30

12 6950 E146A-12 0.40 0.70 1.05 1.50 2.10 - - -

9 7600 E245-12 0.50 0.90 1.30 1.80 2.40 - - -

CTS 6 3950 E243-11 - 0.17 0.34 0.55 0.74 0.53 0.34 0.16
Brushless DC Motor
12 8000 E258-11 - - 0.32 0.68 1.00 0.67 0.22 -

9 6000 E244-11 - 0.29 0.54 0.92 1.39 0.88 0.60 0.22

12 8000 E257-11 - - 0.78 1.15 1.75 1.10 0.70 -

5 4200 E256-13 - - - - 1.30 0.95 0.70 0.50

5 4150 E256-12 0.25 0.49 0.72 1.00 1.32 - - -

12 7650 E259-12 0.40 1.00 1.40 1.90 2.50 - - -

*PCD: Peak Current Draw

Note: The Ordering Information Section includes a few selected part numbers for the product line.
Other performances and configurations are available. Please contact your Sales Representative or
an Application Engineer to discuss your application needs.
 23

CTS Series Micro Diaphragm Pumps (air/gas)

Chemical Compatibility Chart*

Miniature Pumps

Chemical Compatibility of Wetted Path Compatibility Legend

Materials
1. EXCELLENT
Chemical FKM EPDM AEPDM PSU Minimal or no effect
Air 1 1 1 1 2. GOOD
Ozone (1000 ppm) 4 4 4 1 Possible swelling and/or
Oxygen 1 1 1 1 loss of physical properties
Ethylene (Ethene) 1 4 1 1 3. DOUBTFUL
Acetylene 1 1 1 1 Moderate or severe swell-
ing and loss of physical
Propane 1 4 4 1
properties
Methane 1 4 4 1
4. NOT RECOMMENDED
Nitrogen 1 1 1 1
Severe effect and should
Carbon Dioxide 1 2 2 1 not be considered
Halothane (Up to 5%) 1 4 4 -
Note: Consult factory for
*The above is an Abbreviated Chemical Compatibility Chart. Please other gases.
consult factory for details.

Accessory Information
A Filter-Muffler is always recommended in the air inlet or outlet to reduce noise and risk of debris
that may affect pump performance. See Typical Flow Diagrams for installation guidelines and Note 2 in
Appendix at the end on noise

Typically a 40 micron filter is recommended to be supplied by the customer. Following are three other
options of filtering specifications

Part Number: 00085-15

Part Number: 00492-15

(Filters to 10 microns)
.500 [12.70]

Part Number: 01504-10-0001

 24

CTS Series Micro Diaphragm Pumps (air/gas)

Accessory Ordering Information

Filtering Level Wetted
Part No. Filter Area Operating Limitations
(Micron) Materials

Miniature Pumps
Max Temperature Min Temperature
00492-15 10 1.71 in sq (11 sq cm) Polypropylene
80°c 32°c

01540-10-0001 75-90 .02 in sq (16 sq mm) 80°c 32°c Polyethylene

00085-15 0.01 .39 in sq (252 sq mm) 110°c 32°c Nylon

Filter-Mufflers: To assist with filtration and optimize noise reduction.
Tubing: Recommendation 1/8" ID.

To order on-line go to www.parker.com/precisionfluidics/cts) and configure the CTS Miniature Diaphragm Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific application
requirements. Providing information on the following requirements will assist us in developing an optimal solution
for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage
• Function in the Application

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to
tailor the pump configuration when noise is a critical criterion in the effort to meet the performance requirements
of the application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels
possible depending on application.
 25

BTX-Connect Miniature Diaphragm Pump

Up to 11 LPM Free Flow
Parker’s BTX-Connect pump product line combines best in class diaphragm
pump design, innovative ‘connected’ brushless motor technology, ultra-low
Miniature Pumps

vibration, and advanced manufacturing techniques to bring a next-generation

solution to next-generation device needs. The BTX-Connect Pump is designed
to provide high performance with superior quality and reliability. The options
for Motor Control, Single Head, Dual Head, Pressure only, Vacuum only, and
Pressure/Vacuum configurations offer a wide range of solutions with the
support of Parker’s Global Teams.

Applications Features
• Point of Care Diagnostics “Connected” brushless motor design with digital communication control and
• Negative Pressure Wound monitoring available
Therapy Fail-safe design with over-current, stall, and over-temperature shut-down
• Compression Therapy
• Medical Simulation Optimized pump balancing for ultra-low vibration
• Scent Dispersion RoHS, REACH, and CE compliant
Product Specifications
Physical Properties Electrical Connect Features
Operating Environment1 : Motor Type (DC): Speed Control Options:
41 to 122°F (5 to 50°C) Brushless Slotted, Brushless Slotless On/Off Control, Factory
Storage Environment : Nominal Motor Voltages4: Set Speed
-4 to 212°F (-20 to 100°C) 12 or 24 VDC PWM
Media: Electrical Termination: 0-5V Analog
Air, Nitrogen, Oxygen, and other Mating Connector: JST PAP-06V-S Serial UART
non-reacting gases Pin 1: Tachometer Speed (Blue) Current Limit Shut Down:
Humidity: Pin 2: PWM or 0-5V Input (White) Compact BLDC 12V - 1 Amp
0 - 80% Relative Humidity Pin 3: +DC Voltage Input (Red) Compact BLDC 24V - 0.5 Amp
Non-condensing Pin 4: -Ground (Black) Slotless BLDC 12V - 2 Amp
Noise Level2 : Pin 5: Digital UART Rx (Brown) Slotless BLDC 24V - 1 Amp
As low as 45 dB @ 12 in (30 cm) Pin 6: Digital UART Tx (Purple) Temperature Limit Shut Down:
Muffler recommended for additional Compact BLDC: 90°C
noise reduction (see accessories) Slotless BLDC: 90°C
Pump Assembly Rated Life3 : Time before shut down: 2 Seconds
Brushless Motor - 15,000 Hours UART Serial Comm:
Weight: Pump speed measurement:
Compact BLDC Single Head
±200 RPM
4.4 oz (125 g)
Compact BLDC Dual Head Pneumatic Internal Motor Temp: ±10°C
Maximum Unrestricted Flow: Current Measurement: ±50mA
5.8 oz (165 g)
Single Head: Up to 6 LPM Temp and current limits are factory
Slotless BLDC Single Head
7.4 oz (209 g) Dual Head: Up to 11 LPM adjustable
Slotless BLDC Dual Head Pressure Range: On/Off only, PWM input, and 0-5Vdc are
factory set, see ordering table.
8.4 oz (240 g) Continuous Duty:
Standard on/off configuration only
Wetted Materials Up to 30 PSIg (2 Bar) requires DC power and Ground.
Diaphragm: Vacuum Range:
Long Life - Advanced EPDM Continuous Duty:
Valves: Up to -22 inHg (-558 mmHg)
EPDM, Advanced EPDM Filtration:
Pump Head: 40 microns - recommended
PBT
Other materials available upon request
 26

BTX-Connect Miniature Diaphragm Pump

Typical Flow Curve
BTX-Connect Single Head
Typical Performance

Miniature Pumps
BTX-Connect Dual Head
Typical Performance

• Dual head performance shown with B2H configuration and pump heads connected in parallel
• Curve shows maximum flow capability with a 0.090” pump offset, which are vacuum or pressure only
Pumps capable of alternating pressure and vacuum are available with 0.050” pump offset or
less. See ordering table below for a list of available standard options
• Detailed performance specification sheets are available for each part number
• Contact Parker Precision Fluidics Applications Engineering team for other performance options

The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all
performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application,
follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from
a Parker or its subsidiaries or authorized distributor.
The above graphs represent an example of performance for the pump series handling air at 800 feet (244 m) above sea level at 75 degree F (24 C). Performance
will vary depending on barometric pressure and media temperature. A variety of configurations can be accommodated to meet application requirements.
Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows depending on specific
customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 27

BTX-Connect Miniature Diaphragm Pump

Sizing and Selection
BTX-Connect Single Head BTX-Connect Single Head
Miniature Pumps

Compact BLDC Motor Slotless BLDC Motor

B1C B1S

BTX-Connect Dual Head

BTX-Connect Dual Head BTX-Connect Dual Head High Performance Slotless
Compact BLDC Motor Slotless BLDC Motor BLDC Motor
B2C B2S B2H

Efficiency Better Best Best

Flow Rate Good Better Best

Life Best - 15,000 Hours Best - 15,000 Hours Best - 15,000 Hours

Control On/Off, Digital, PWM, 0-5V On/Off, Digital, PWM, 0-5V On/Off, Digital, PWM, 0-5V

Protection Reverse Polarity, Temp, Current Reverse Polarity, Temp, Current Reverse Polarity, Temp, Current

Cost Better Good Good

Mounting Guidelines: Port Connections:

• Bracket options available for mounting • Barbs are sized for 1/8" (3 mm) ID tubing,
consideration (See EZ Mount catalog pages). 70-80 durometer recommended.
• Hole in the center of the bottom housing is for • Flow direction is marked on the pump head
manufacturing only—not to be used for mounting. with arrows.
• Mounting holes are drilled for #6-20 self-tapping
screws with 1/4" (6 mm) thread engagement
torque to 4 in-lbs (0.45 N-m).
 28

BTX-Connect Miniature Diaphragm Pump

Mechanical Drawings

Miniature Pumps
.47
[12.0] .40 1.18
[10.2] [30.0]

2.03 2.15
[51.6] [54.7]

1.30
[33.0]
1.18 2.22
[30.0] [56.5]

.125
[3.2] .45
MOUNTING HOLES [11.5]

NOTES:
MOUNTING HOLES ARE DRILLED FOR .75
#6-20 SELF-TAPPING SCREWS WITH [19.1]
1/4" THREAD ENGAGEMENT. UNITS
[torque to 4 in-lbs.] IN [mm]

.22
[5.5]

DRAWN DATE PART NO. I.D. EXTENSION TITLE

PARKER HANNIFIN CORPORATION
PRECISION FLUIDICS DIVISION

DATE
MOORESVILLE, NC 28117
1.18 .40
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PRECISION FLUIDICS DIVISION OF ENG
[30.0]
PARKER HANNIFIN CORPORATION ("PARKER").
[10.2] .47
THIS DOCUMENT IS PUBLISHED ON THE UNDERSTANDING THAT THE DOCUMENT AND THE INFORMATION IT CONTAINS WILL NOT BE
- DO NOT SCALE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
INCHES. TOLERANCES ARE:
THIRD ANGLE PROJECTION [12.0]
COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THE WRITTEN CONSENT OF PARKER, AND WILL NOT BE USED EXCEPT FOR THE DIRECT
BENEFIT OF PARKER, AND WILL BE RETURNED AND ALL FURTHER USE DISCONTINUED UPON REQUEST BY PARKER.
DOC DATE MATERIAL: SIZE DWG NO
DRAWING - © PARKER HANNIFIN CORPORATION 2003. ALL RIGHTS RESERVED.
.XX : .010 [.254] ANGULAR : 1/2 B
INTERPRET PER ASME
Y14.5M-1994 .XXX : .005 [.127] FRACTIONAL : 1/64
PROD DATE
2X .125 SCALE

[3.2] 1.30
MOUNTING HOLES [33.0]

SM06B-PASS-TB
JST 6-PIN CONNECTOR
.87 2.97 2.73
[22.1] [75.3] [69.2] 6
5
4
3
2
.41 1
[10.4]

2.52 PIN OUT

[63.9] 1 TACH
2 PWM / EVC
UNITS
3 V+
IN [mm]
4 GROUND
5 UART Rx
6 UART Tx
NOTES:
1.18 MOUNTING HOLES ARE DRILLED FOR
[30.0] #6-20 SELF-TAPPING SCREWS WITH
1/4" THREAD ENGAGEMENT.
[torque to 4 in-lbs.]

DRAWN DATE PART NO. I.D. EXTENSION TITLE

PARKER HANNIFIN CORPORATION
PRECISION FLUIDICS DIVISION

DATE
MOORESVILLE, NC 28117
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PRECISION FLUIDICS DIVISION OF ENG
PARKER HANNIFIN CORPORATION ("PARKER").
THIS DOCUMENT IS PUBLISHED ON THE UNDERSTANDING THAT THE DOCUMENT AND THE INFORMATION IT CONTAINS WILL NOT BE
SCALE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
INCHES. TOLERANCES ARE:
THIRD ANGLE PROJECTION
COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THE WRITTEN CONSENT OF PARKER, AND WILL NOT BE USED EXCEPT FOR THE DIRECT
BENEFIT OF PARKER, AND WILL BE RETURNED AND ALL FURTHER USE DISCONTINUED UPON REQUEST BY PARKER.
DOC DATE MATERIAL: SIZE DWG NO
G- © PARKER HANNIFIN CORPORATION 2003. ALL RIGHTS RESERVED.
.XX : .010 [.254] ANGULAR : 1/2 B
ET PER ASME
994 .XXX : .005 [.127] FRACTIONAL : 1/64
PROD DATE
SCALE SHEET 1
 29

BTX-Connect Miniature Diaphragm Pump

Mechanical Drawings
Miniature Pumps

.47 .40 1.18

[12.0] [10.2] [30.1]

2.15
2.03
CONNECTOR

[54.7]
[51.6]
654321

PINS

2.97
[75.3]
1.18 2.00
[30.0] [50.8]

.125
[3.2] PALR-06VF
MOUNTING HOLES JST 6-PIN CONNECTOR

.45
[11.5]

NOTES: .75
[19.1]
MOUNTING HOLES ARE DRILLED FOR
#6-20 SELF-TAPPING SCREWS WITH
1/4" THREAD ENGAGEMENT.
[torque to 4 in-lbs.]
UNITS
.22 IN [mm]
[5.5]

1.18 .40
[30.0] [10.2] .47
[12.0]

2X .125
[3.2]
MOUNTING HOLES

1
2
.87 2.97 2.73 3
[22.1] [75.3] [69.2] 4
5
6

.41
[10.4]

3.26
[82.7]

PALR-06VF
JST 6-PIN CONNECTOR

1.18 PIN OUT

[30.0] 1 TACH
2 PWM / EVC
3 V+
4 GROUND
5 UART Rx
6 UART Tx

2.00 NOTES:
[50.8] MOUNTING HOLES ARE DRILLED FOR
#6-20 SELF-TAPPING SCREWS WITH
UNITS 1/4" THREAD ENGAGEMENT.
IN [mm] [torque to 4 in-lbs.]
 30

BTX-Connect Miniature Diaphragm Pump

Typical Flow Diagrams

Miniature Pumps
Negative Pressure Wound Therapy (NPWT)
 31

BTX-Connect Miniature Diaphragm Pump

Typical Flow Diagram
Compression Therapy Prevention (DVT)
Miniature Pumps

Air-Over-Liquid Flow Control

 32

BTX-Connect Miniature Diaphragm Pump

CE Compliant
Test Standard Test Level

Miniature Pumps
IEC 60601-1-2:2014
Radiated Emissions Class B
EN 61000-6-3:2007/A1:2011
DC Mains Conducted Emissions IEC 60601-1-2:2014 Class B
IEC 60601-1-2:2014 +/- 8kV couplings planes
ESD
EN 61000-4-2 +/- 8kV contact, +/- 15kV air
IEC 60601-1-2:2014 80-2700 MHz @ 3V/m 1kHz
RFI - Amplitude Modulated
EN 61000-4-3 80%AM
Proximity fields from RF wireless IEC 60601-1-2:2014 Full table of tested conditions
communication EN 61000-4-3 available in the lab report
IEC 60601-1-2:2014
Power-Frequency Magnetic Filed 30A/m
EN 61000-4-8

Electrical Integration and Motor Control

Motor Electrical Connection
Integrated Electrical Connector Male pin JST PALR - 06VF
Manufacturing: JST
Recommended Mating Connector Housing Part Number: PAP-06V-S
Terminal Part Number: SPHD-001T-PO.5

Recommended Wire 22 AWG Stranded Wire

BTX- Connect Motor Control Options

The motor control feature is factory selected in 4 speed control modes: On/Off control, PWM
input, 0-5Vdc input or UART Serial port mode. These modes are described in detail in the
Application Notes section. The Tachometer signal is always enabled.
*The controller utilizes the on-board micro-controller clock, it is not a real time clock.
Speed Control Methods
With this configuration, the pump speed is factory set, only ground and
Stored Speed Setting input voltage must be supplied. The speed can only be adjusted using
UART command with this mode.
A PWM signal input is provided on the speed input to change pump
PWM Input speed. When using this mode, the pump is set to 100% speed if the
input is floating.

0-5 Volt DC signal is applied to control speed. When using this mode,
Analog 0-5Vdc Control
the pump is set to 0% speed if the input is floating.

The user will activate the pump and adjust the speed of the pump using
UART Control the UART serial port channel, the pump will be off until the host sends
a UART speed command.
 33

BTX-Connect Miniature Diaphragm Pump

Electrical Integration and Motor Control
PWM Control Electrical Details
Miniature Pumps

1k Ω to +5VDC weak pull-up enabled on micro control-

ler (Approximately 150-200 microAmp)5.1VDC Zener diode
On Board Motor Circuit limits voltage to micro-controller. Controller measures 10
samples 5ms apart to filter input signal. (50ms time be-
tween speed updates)
User must pull the 5 VDC signal to ground, 0.8 VDC low
User Control Circuit threshold. MOSFET transistor circuit with external pull-up
resistor is recommended as shown in example below.
0-95% duty cycle. 96-100% will operate motor at full speed
Control Range Recommended to only supply PWM signal of 0-95% for
speed control.
User PWM Control Circuit Example

12

0-5VDC Control Electrical Details

1k Ω to micro controller analog input.
5.1VDC Zener diode limits voltage to micro-controller.
If the input is disconnected (floating input) it is normal
On Board Motor Circuit for the pump to operate very slowly, less than 100 RPM or
completely off.
Controller measures 10 samples 5ms apart to filter input
signal. (50ms time between speed updates)
User Control Circuit User must supply 0 to 5 VDC analog signal for control
Tachometer Electrical Details
Speed Signal Output The feature is always on, regardless of speed control mode
Compact BLDC Signal 4 Pulses per rotation of the pump
Slotless BLDC Signal 1Pulse per rotation of the pump
0 to 5 VDC square wave signal
On Board Motor Circuit
Low signal will be < 0.6VDC, High will be > 4.3VDC
Do not connect motor electrical connector harness while power is applied (Hot Plugging).
Arching in the connector may damage UART electronics.
 34

BTX-Connect Miniature Diaphragm Pump

Application Notes
UART Electrical Details

Miniature Pumps
UART Voltage 5Vdc TTL UART Voltage

On Board Motor Circuit UART Connection to PIC18F micro-controller

Recommended to use isolation, such as optocouplers motor electronics from user elec-
User Control Circuit tronics. Parker uses a Microchip MCP2200 UART to USB transceiver IC and confirms it is
compatible with the BTX-Connect Motor.

It is possible to power the motor micro-controller through the UART Rx pin. Care should
be taken to avoid this possibility. If voltage is provided to the Motor Rx pin while Ground
is connected and Vin is disconnected the internal micro-controller may be parasitically
powered.
Power Supply and
This is due to current flowing through the internal Schottky protection diodes in the
Ground Recommendations
micro-controller. This can cause the micro-controller to stay powered on when the power
is cycled, or it may cause the micro-controller to enter a brown-out condition.
It is recommended to remove power from the Rx pin in this condition or low-side switch
the Ground to the pump.

Connect Features and Instructions

The BTX-Connect offers many methods to control the pump, this is configured by the factory. However, in any
configuration, the serial UART port can be accessed for pump information.

Display Fault on
Serial Port

State Diagram
Fault Found

TEMPERATURE
CHECK

POWER ON BUILT IN TEST

Over Current (>3 Seconds)

UPDATE SPEED
Check for speed change CURRENT MONITORING STOP MOTOR
(for every 5ms) (Check Over Current)
SPEED CHANGE

Every 3ms

x10 Samples Collected No Fault

Every 3ms Temperature Fault
UPDATE SPEED
(every 50ms)
RUN
TEMPERATURE
MONITOR STOP MOTOR
No Fault
Stop Motor
UART Command
Start Motor
UART Command
Hall Fault

STOP MOTOR
STOP MOTOR
 35

BTX-Connect Miniature Diaphragm Pump

Serial UART Details
The BTX with Connect technology includes a UART Serial port that is available regardless of speed control mode.
Communication with the pump allows a user to monitor pump performance and pump health. This provides more
Miniature Pumps

detail to the hosts system for more integrated pump management and error handling.

UART Configuration
Electrical Signal 5Vdc TTL Level*

Baud Rate 9600 bps

Data Bits 8
Parity None
Stop Bits 1
Flow Control None
Timing Allow>20ms delay between messages

*For integration with RS232 or USB, a transceiver/converter is required

UART Syntax
1 Byte 4 Bytes 1 Byte 4 Bytes 1 Byte
$ GETS , TACH #
Starting Flag Command Type Comma Selector Command Ending Flag

1 Byte 4 Bytes 1 Byte 4 Bytes 1 Byte 1-5 Bytes 1 Byte

$ CMDS , PWMS , 75 #
Starting Flag Command Type Comma Selector Parameter Name Comma Separator Input Parameter Ending Flag

*Each message from the motor will end with a carriage return (ASCII: OD)

UART Command Set Command Sent to Motor Response from Motor Description
If the motor controller temperature exceeds
the allowed limit, the pump will not start.
Temperature Fault No Command Required; $Temperature This is continuously monitored until the fault
at Start-Up Only at pump startup Fault: xxx# is cleared and the motor will start.
The pump will continuously send this re-
sponse until the fault is cleared.
Pump will report a heartbeat message over
Pump Heartbeat Message No Command Required $HB#
UART every 30 seconds
Incorrect Command Response if an incomplete message is sent
Invalid Message Response $CMD: Error#
or Syntax to the pump
Control Commands Command Sent to Motor Response from Motor Description
Set PWM Duty Cycle, <1-100%>, 505 = 50.5%
Set Pump Speed $CMDS,PWMS,500# $ACK,PWMS,500#
1000 = 100.0%
Stop Pump $CMDS,MSTP# $ACK,MSTP# Motor will stop
Restart Pump $CMDS,MRST# $ACK,MRST# Pump will restart, will allow restart fault
 36

BTX-Connect Miniature Diaphragm Pump

Serial UART Details

Miniature Pumps
Status Commands Command Sent to Motor Response from Motor Description

Pump reports approximate average motor cur-

Read Approx. Current $GETS,CURR# $STAT,CURR,1100#
rent, reported in mA

Pump reports approximate temperature on mo-

Read Approx. Temp. $GETS,TEMP# $STAT,TEMP,50#
tor controller, reported in Celsius

Pump reports approximate pump speed in RPM

Read Pump Speed $GETS,TACH# $STAT,TACH,3200#
(integer value 0 - 65530)

Pump will report output duty cycle (regardless

Read Set PWM Duty $GETS,SDTY# $STAT,SDTY,50# of control method) (integer value 0 - 1000), 505 =
50.5% 1000 = 100.0%

Pump will report “Normal” if no fault has oc-

$STAT,HLTH,Normal#
curred
Pump will report “Over Current” if preset
$STAT,HLTH,OverCurrent# current limit has been reached and pump has
stopped

Read Pump Health $GETS,HLTH# Pump will report “OverTemperature” if preset

#STAT,HLTH,OverTemperature# temperature limit has been reached and pump
has stopped

Pump will report “UnknownHallState” if the hall

$STAT,HLTH,UnknownHallState# pattern detected is undefined, for example this
may occur if a hall sensor has failed

Command Sent to
History Command Motor
Response from Motor Description

Pump will report the number of times a current fault has oc-
$STAT,CRED,xxx#
curred (integer value 0 - 255)

Pump will report the number of times a temperature fault has

$STAT,TRED,xxx#
occurred (integer value 0 - 255)

Pump will report number of operating hours for the pump (inte-
ger value 0 - 22500); approximate accuracy for comparison use
Read Pump History $GETP,HIST# Pump stores time in increments of 10 seconds, upon start-up a
$STAT,HOUR,xxxxx#
10 second increment is immediately stored (frequent on/off will
effect time accumulation). Due to limitations with flash storage
read/writes, this value is capped at 22,500 hours.

Pump will report number of on/off power cycles for the pump
$STAT,CYCL,xxxxxxx# (integer value 0 - 1500000)
This value is capped at 1.5 Million cycles.
 37

BTX-Connect Miniature Diaphragm Pump

Application Notes
Chemical Compatibility Chart*
Miniature Pumps

Compatibility Legend
1. EXCELLENT
Minimal or no effect
2. GOOD
Possible swelling and/or
loss of physical properties
3. LIMITED
Moderate or severe
swelling and loss of
physical properties
4. NOT RECOMMENDED
Severe effect and should
not be considered
Note: Consult factory for
*The above is an Abbreviated Chemical Compatibility Chart. Please other gases.
consult factory for details.

Pulse Width Modulation (PWM)

Pulse-width modulation is a commonly used technique for controlling DC motors.

The average value of the voltage fed to the motor is controlled by turning a switch between the voltage
supply and the motor on-and-off at a fast pace. The longer the switch is on compared to the off time, the
higher the power supplied to the motor.

The PWM switching frequency varies for different types of devices, and is selected based on how it af-
fects the device. For example, some applications require a faster switching frequency to prevent audible
noise or electrical noise.

The term duty cycle describes the ratio of on-time to the period (one complete on-and-off cycle). Duty
cycle is normally expressed as a percentage of on-time, 100% being full-power and 50% being half-
power.

The advantage of PWM is the reduction of power-loss due to switching versus other control methods.
Parker Hannifin recommends controlling the pump using 15kHz - 20 kHz frequency range.
20% PWM Example 50% PWM Example
10 10

9 Frequency: 20kHz 9 Frequency: 20kHz

Period: 50μs Period: 50μs
8 Supply Voltage:5V 8 Supply Voltage:5V
PWM Duty Cycle: 20% PWM Duty Cycle: 50%
7 7
Effective Voltage: 1V Effective Voltage: 2.5V
6 6
Voltage (V)

Voltage (V)

5 5

4 4

3 3

2 2

1 1

0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375
Time in Micro-Seconds (μs) Time in Micro-Seconds (μs)
 38

BTX-Connect Miniature Diaphragm Pump

Accessories Information
A Filter-Muffler is always recommended in the air inlet or outlet to reduce noise and risk of debris
that may affect pump performance.

Miniature Pumps
Parker recommends 40 micron or better filtration to be used with this pump series.

REVISION HISTORY REVISION HISTORY REVISION HISTORY

REV DESCRIPTION BY DATE
REV APPROVED DESCRIPTION BY DATE REV APPROVED DESCRIPTION BY DATE
- - - ECO# 0269804 MGM 11/30/18

65 65 PIN 65 PIN PIN

43 43 LOCATION
WIRE COLOR
43 LOCATION
WIRE COLOR
LOCATION
WIRE COLOR
21 21 1 N/A 21 1 BLUE 1 BLUE
2 N/A 2 WHITE 2 WHITE
3 RED 3 RED 3 RED
4 BLACK 4 BLACK 4 BLACK
5 N/A 5 N/A 5 BROWN
6 N/A 6 N/A 6 VIOLET
20  .25 20  .25 20  .25

P/N: 00492-15 P/N: 01881-KT P/N: 02040-10 .050

JACKET
P/N: 02042-10  .050
P/N: 02043-10 .050
DIAMETER

(10 micron Filter) (Parallel Tubing) (2-Wire Harness) (4-Wire Harness) (6-Wire Harness)
JACKET JACKET
DIAMETER DIAMETER

.125 .025 1 2 3 4STRIP

.125 5
.025 6
& TIN
1 2 3 4 STRIP
5.025
.125 6
& TIN
1 2 3 4 5
STRIP & TIN
PIN ID PIN ID PIN ID

22 (7/30) AWG TINNED COPPER CONDUCTOR 22 (7/30) AWG TINNED COPPER CONDUCTOR 22 (7/30) AWG TINNED COPPER CONDUCTOR
IRRADIATED POLY-VINYL CHLORIDE (XLPVC) INSULATION IRRADIATED POLY-VINYL CHLORIDE (XLPVC) INSULATION IRRADIATED POLY-VINYL CHLORIDE (XLPVC) INSULATION
UL STYLE 1429 UL STYLE 1429 UL STYLE 1429
TWISTED 1-2 TURNS PER INCH TWISTED 1-2 TURNS PER INCH TWISTED 1-2 TURNS PER INCH

Parts List Parts List Parts List

ITEM QTY PART NUMBER DESCRIPTION ITEM QTY PART NUMBER DESCRIPTION ITEM QTY PART NUMBER DESC
1 1 PAP-06V-S CONNECTOR 1 1 PAP-06V-S CONNECTOR 1 1 PAP-06V-S CONNECT
3 2 WIRE WIRE 3 4 WIRE WIRE 2 6 WIRE WIRE

Connector Pin-out
4 6 SPHD-001T-P0.5 CONTACT 4 6 SPHD-001T-P0.5 CONTACT 3 6 SPHD-001T-P0.5 CONTACT
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND
THISPROPRIETARY TO PRECISION
DOCUMENT CONTAINS FLUIDICSTHAT
INFORMATION DIVISION OF PARKER HANNIFIN
IS CONFIDENTIAL ANDTHIS CORPORATION
PROPRIETARY
DOCUMENTTO ("PARKER").
PRECISION
CONTAINS THIS DOCUMENT
FLUIDICS
INFORMATION DIVISION ISCONFIDENTIAL
THAT ISOF PUBLISHED ON THEPROPRIETARY
PARKER HANNIFIN
AND UNDERSTANDING
CORPORATION THAT
("PARKER").
TO PRECISION THIS DOCUMENT
FLUIDICS IS PUBLISHED
DIVISION OF PARKERON THE UNDERSTANDING
HANNIFIN CORPORATION THAT
("PARKER"). THIS DOCUMENT IS PUBLISHED ON THE UNDERSTANDING THAT
THE DOCUMENT AND THE INFORMATION IT CONTAINS WILL NOT BE THE
BE RETURNED AND ALL FURTHER USE DISCONTINUED UPON REQUEST
COPIED OR DISCLOSED
DOCUMENT
BY PARKER.
BE RETURNED
AND THETOINFORMATION
© PARKER
AND
OTHERS EXCEPT
HANNIFIN
ALL FURTHER
WITH THEWILL
IT CONTAINS
USECORPORATION
WRITTEN
DISCONTINUED2003.
UPONALL
CONSENT
NOT BE COPIED
RIGHTSBE
REQUEST
OF
RESERVED.
BY
20 INCHES (508MM)
OR PARKER,
PARKER. ©AND
RETURNED
AND
DISCLOSED
THE DOCUMENT AND TO
PARKER
WILL
THE NOT BE
OTHERS
HANNIFINUSE
ALL FURTHER
USEDITWITH
EXCEPT
INFORMATION EXCEPT
CORPORATION
THEFOR
CONTAINS THENOT
WRITTEN
WILL
2003.UPON
DISCONTINUED
DIRECT
ALL RIGHTS
BENEFIT
CONSENT OFDISCLOSED
OF OR
BE COPIED
RESERVED.
REQUEST
PARKER,
PARKER, AND
AND WILL WILL
NOT BE USED
TO OTHERS EXCEPT
EXCEPT FOR WRITTEN
WITH THE THE DIRECT BENEFIT
CONSENT OFOF
BY PARKER. © PARKER HANNIFIN CORPORATION 2003. ALL RIGHTS RESERVED.
PARKER,
PARKER, AND
AND WILL
WILL NOT BE USED EXCEPT FOR THE DIRECT BENEFIT OF PARKER, AND WILL

DRAWN DATE PART NO. I.D. EXTENSION

DRAWN DATETITLE PART NO. I.D. EXTENSION
DRAWN TITLE
DATE PART NO. I.D. EXTENSION TITLE
PARKER HANNIFIN CORPORATION PARKER HANNIFIN CORPORATION PARKER HANNIFIN CORPORATION
WIRE HARNESS, BTX-CONNECT, PMR
2-WIRE 11/23/18
PRECISION FLUIDICS DIVISION
MOORESVILLE, NC 28117
PRECISION FLUIDICS DIVISION
MOORESVILLE,
ENG NC 28117
DATE
02040-10
PRECISION FLUIDICS DIVISION
MOORESVILLE, NC 28117
ENG DATE
02042-10 ENG
WIRE HARNESS, BTX-CONNECT, 4-WIRE
DATE
02043-10
PMR
Color
11/30/2018
Function WIRE HARNESS, BTX-CONNECT, 6-WIRE

- DO NOT SCALE
DRAWING -
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
INCHES. TOLERANCES ARE:
- DOTHIRD ANGLE PROJECTION
NOT SCALE
DRAWING -
DOC DATE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
INCHES. TOLERANCES ARE:
MATERIAL:
- THIRD
DO NOTANGLE
DRAWING -
PROJECTION
SCALE
DOC DATE
SIZE ARE DWG
UNLESS OTHERWISE SPECIFIED DIMENSIONS
INCHES. TOLERANCES ARE:
NO
IN MATERIAL:
THIRD ANGLE PROJECTION
1
DOC
MGM Blue
DATE
REV
SIZE
11/30/18
DWGMATERIAL:
NO
Tachometer REVSIZE DWG NO

.XX :  .010 [.254] ANGULAR : 1/2 :  .010 [.254] VARIOUS A 02040-10

VARIOUS -
A 02042-10
VARIOUS - A 02043-10
- INTERPRET PER ASME - INTERPRET PER ASME
.XXPROD DATE : 1/2
ANGULAR
- INTERPRET PER ASME
.XX :  .010 [.254]
PROD ANGULAR : 1/2
DATE PROD DATE

2 White Speed Input

Y14.5M-1994 - FRACTIONAL : 1/64 Y14.5M-1994 - Y14.5M-1994 -
.XXX : .005 [.127] .XXX : .005 [.127] FRACTIONAL : 1/64 .XXX : .005 [.127] FRACTIONAL : 1/64
SCALE 3:1 PMR
SHEET 1 11/30/2018
OF 1
SCALE 3:1 SHEET 1 OFSCALE
1 3:1 SHEET

ENG-4.02_(Drawing_Template_Inventor) 02.08.11 REV_A ENG-4.02_(Drawing_Template_Inventor) 02.08.11 REV_A ENG-4.02_(Drawing_Template_Inventor) 02.08.11 REV_A

3 Red Power V+
4 Black Ground V-
0.125 INCHES (3.175MM)
STRIP & TIN 5 Brown UART Rx
6 Violet UART Tx

22 (7/30) AWG TINNED COPPER CONDUCTOR

IRRADIATED POLY-VINYL CHLORIDE (XLPVC) INSULATION
UL STYLE 1429
TWISTED 1-2 TURNS PER INCH
 39

BTX-Connect Miniature Diaphragm Pump

EZ Mount available
EZ Mount provides ease of installation and effective control of
vibration transfer. EZ Mount was designed to mount easily to the
Miniature Pumps

Precision Fluidic BTX Family of diaphragm pumps.

Features
Isolation feet on the EZ mount can be rotated in any one of three ninety-degree
planes and is designed for top-down or bottom-up mounting providing
simple installation.
EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weight is: 0.63 oz (18 g).
Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
Designed to keep height and size to a minimum.
All necessary hardware to attach to a BTX pump is included.

Style A Dimensions
Physical Properties 1.85
47.1

Operating Environment:
3 POSITIONS IN
90 DEGREE INCREMENTS

41 - 158°F (5 - 70°C)
Humidity:
1.80 2.47 1.46 .78 2.13
0 - 95% Relative Humidity 45.6 62.8 37.1 19.9 54.2

Base Plate:
Noryl GTX830
Feet: 1.18
30
.61
15.4
.84
21.4
1.52

Silicone 38.5

UNITS

Feet Insert: IN. [mm]

Brass
Hardware:
Style B Dimensions
1.85
47.1

Zinc-Plated Steel 3 POSITIONS IN

90 DEGREE INCREMENTS

Isolation Feet are available in either

threaded or thru-hole clearance for
standard #4-40 or #6-32 (M3 for 2.82 3.50 2.49 1.81 3.16

clearance hole only). 71.7 88.8 63.1 46 80.3

1.18 .51 .84

30 12.9 21.4
1.52
38.5

EZ Mount for BTX with Compact Motor EZ Mount for BTX with Slotless Single EZ Mount for BTX with Slotless Dual UNITS
IN. [mm]

Single and Dual Head (B1C and B2C) Head (B1S and B1H) Head (B2S and B2H)
Part Number Style Feet Type Part Number Style Feet Type Part Number Style Feet Type
00328-10-A45S A #4-40 Threaded 01074-10-A45S B #4-40 Threaded 00329-10-A45S B #4-40 Threaded
00328-10-B45S A #4 Clearance 01074-10-B45S B #4 Clearance 00329-10-B45S B #4 Clearance
00328-10-D45S A #6-32 Threaded 01074-10-D45S B #6-32 Threaded 00329-10-D45S B #6-32 Threaded
00328-10-C45S A #6 / M3 Clearance 01074-10-C45S B #6 / M3 Clearance 00329-10-C45S B #6 / M3 Clearance
 40

BTX-Connect Miniature Diaphragm Pump

Ordering Information
4 8 12 16

Miniature Pumps
-16 -12 -8 -4
0
Motor inHq inHq inHq inHq PSIg PSIg PSIg PSIg
Configuration Voltage Part Number Free
Control -406 -305 -203 -102 276 552 827 1103
mmHg mmHg mmHg mmHg Flow
mbar mbar mbar mbar
B1C 12 On/Off B1C-050F12AN-00 0.4 1.1 1.8 2.5 3.3 2.7 2.1 1.6 1.1
BTX-Connect Single 12 PWM B1C-050F12AN-03 0.4 1.1 1.8 2.5 3.3 2.7 2.1 1.6 1.1
Head
with Compact BLDC 24 On/Off B1C-050F24AN-00 0.4 1.1 1.8 2.5 3.3 2.7 2.1 1.6 1.1

24 PWM B1C-050F24AN-03 0.4 1.1 1.8 2.5 3.3 2.7 2.1 1.6 1.1
12 On/Off B1C-070P12AN-00 - - - - 4.5 3.5 2.7 2.0 1.2
12 0-5Vdc B1C-070P12AN-02 - - - - 4.3 3.1 2.5 1.8 1.2
12 On/Off B1C-090P12AN-00 - - - - 5.5 4.5 3.5 2.8 2.2
12 PWM B1C-090P12AN-03 - - - - 5.5 4.5 3.5 2.8 2.2
24 On/Off B1C-090P24AN-00 - - - - 5.5 4.5 3.5 2.8 2.2
24 0-5Vdc B1C-090P24AN-02 6.1 4.9 4.0 3.2 2.5
12 On/Off B1C-090V12AN-00 1.5 2.5 3.5 4.7 5.8 - - - -
12 0-5Vdc B1C-090V12AN-02 1.2 2 3 4.1 5.2 - - - -
12 PWM B1C-090V12AN-03 1.5 2.5 3.5 4.7 5.8 - - - -
24 On/Off B1C-090V24AN-00 1.5 2.5 3.5 4.7 5.8 - - - -
24 PWM B1C-090V24AN-03 1.5 2.5 3.5 4.7 5.8 - - - -

B1S 12 On/Off B1S-090P12AN-00 - - - - 4.8 3.9 3.1 2.5 2.0

BTX-Connect Single 24 On/Off B1S-090P24AN-00 - - - - 4.8 3.9 3.1 2.5 2.0
Head
with Slotless BLDC

B2C 12 On/Off B2C-050F12AN-00 0.4 1.7 2.6 3.8 5.1 4 3.2 2.3 1.1
BTX-Connect Dual 12 PWM B2C-050F12AN-03 0.4 1.7 2.6 3.8 5.1 4 3.2 2.3 1.1
Head
with Compact BLDC 24 On/Off B2C-050F24AN-00 0.4 1.7 2.6 3.8 5.1 4 3.2 2.3 1.1

24 PWM B2C-050F24AN-03 0.4 1.7 2.6 3.8 5.1 4 3.2 2.3 1.1
12 On/Off B2C-070P12AN-00 - - - - 8.2 6 4.4 3.0 2.0
12 On/Off B2C-090V12AN-00 2.2 3.5 5.4 7.5 9.5 - - - -
12 PWM B2C-090V12AN-03 2.2 3.5 5.4 7.5 9.5 - - - -
 41

BTX-Connect Miniature Diaphragm Pump

Ordering Information
Miniature Pumps

-16 -12 -8 -4 4 8 12 16
0
Motor inHq inHq inHq inHq PSIg PSIg PSIg PSIg
Configuration Voltage Part Number Free
Control -406 -305 -203 -102 276 552 827 1103
mmHg mmHg mmHg mmHg Flow
mbar mbar mbar mbar
B2S 12 On/Off B2S-050F12AN-00 0.8 1.9 2.9 4.1 5.3 4.3 3.5 2.7 2.0

BTX-Connect Dual 24 On/Off B2S-050F24AN-00 0.8 1.9 2.9 4.1 5.3 4.3 3.5 2.7 2.0
Head
with Slotless BLDC 12 On/Off B2S-090P12AN-00 - - - - 9.0 7.2 5.7 4.5 3.3

24 On/Off B2S-090P24AN-00 - - - - 9.0 7.0 5.7 4.3 3.2

12 On/Off B2S-090V12AN-00 2.2 3.8 5.7 7.6 9.3 - - - -

B2H 12 On/Off B2H-050A12AN-00 1.6 2.9 4.2 5.7 7.2 5.8 4.8 3.9 3.0
BTX-Connect Dual 12 On/Off B2H-090V12AN-00 2.8 4.6 6.6 8.7 10.5 - - - -
Head
with High Performance 12 On/Off B2H-090R12AN-00 - - - - 10.7 8.9 7.3 5.8 4.4
Slotless BLDC

Accessories Ordering Table

Part No. Description Comments
02040-10 2 Pin Wire Harness 20” (508mm) Long 2 Pin wire harness for on/off control only
02042-10 4 Pin Wire Harness 20” (508mm) Long 4 Pin wire harness for speed control and tachometer output
02043-10 6 Pin Wire Harness 20” (508mm) Long 6 Pin wire harness required for UART
00492-15 Filter-Muffler Filter to 10 microns. Not included with pump
01881-KT Tubing Assembly As needed for parallel flow. Not included with pump

BTX Part Number Description (see Appendix A comment 9)

B 1 C - 090 P 12 A N - 00
Model Pump Heads Motor Type Pump Offset Diaphragm Configuration Voltage Material Tubing Special
A - 80D
1 - Single 050 - 0.050” F - Universal Pressure & 12 - 12 AEPDM Dia-
B - BTX C - Compact N - None 00 - Factory set speed
Head Offset Vacuum Vdc phragm & low
noise Valves
B - 80D
P - Parallel
070 - 0.070” 24 - 24 AEPDM Dia- 01- Digital UART speed
2 - Dual Head S - Slotless P - Pressure Only (dual head
Offset Vdc phragm & 80D control
only)
Valves
H - High S - Series
090 - 0.090”
Performance V - Vacuum Only (dual head 02 - Analog 0-5 Vdc
Offset
Slotless only)
A - Universal Pressure &
Vacuum 03 - PWM speed control
(High Compression Chamber)
R - Pressure Only
(High Compression Chamber)
Y - Vacuum Only
(High Compression Chamber)
 42

BTX-Connect Miniature Diaphragm Pump

Ordering Information

Miniature Pumps
Please refer to sizing and selection chart for identifying which one will fit your application
To order on-line go to www.parker.com/precisionfluidics/BTX-Connect) to configure your BTX-Connect Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific
application requirements. Providing information on the following requirements will assist us in developing an
optimal solution for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to tailor
the pump configuration when noise is a critical criterion in the effort to meet the performance requirements of the
application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels possible
depending on application.
6. Inductance is an indicator of induced voltage with change in current and it is a key parameter to enable customers’
low energy intrinsic safety systems
7. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the factory
or Applications Engineering.
8. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
9. Part number description for reference only, not all configurations are available or configurable. Contact Parker
Precision Fluidics Applications Engineering team for other performance options.
 43

BTX-Connect Miniature Diaphragm Pump

Serving a broad spectrum of life science, air quality, and process
instrumentation OEM fluidic needs
Miniature Pumps

Providing Pressure and Vacuum:

Broad range of diaphragm pumps for Gas and Liquid

Gas Flow Control:

High to Low Flow Proportional Valves

On/Off & Channel Selection Capabilities:

Gas and Liquid Solenoid Valves

High Precision Thermal Flow Control:

Mass Flow Controllers and Meters
 44

Miniature Pumps
Learn More at: discover.parker.com/BTX-Connect
Below are some common specifications that are helpful to have on hand to accelerate
your product selection:

• Gas Type • Standard Reference Conditions

• Maximum Flow Rate • Process Connection Size and Type
• Inlet and Outlet Pressures • Set Point Signal
• Operating Temperature • Digital Communication Protocol Preferences

For more information call +1 603 595 1500 or email ppfinfo@parker.com

Visit www.parker.com/precisionfluidics

Recommendations on application design and material selection are based on available

technical data and are offered as suggestions only. Each user should conduct their own
tests to determine the suitability for their own use. Parker offers no express or implied
warranties concerning the form, fit, or function of a product in any application.
 45

BTX-Brush Miniature Diaphragm Pump

Up to 6 LPM Free Flow
Parker’s BTX-Brush pump product line combines best in class diaphragm
pump design, ultra-low vibration, and advanced manufacturing techniques to
Miniature Pumps

bring a next-generation solution to next-generation device needs. The BTX-

Brush Pump is designed to provide high performance with superior quality and
reliability. The options for Single Head, Dual Head, Pressure only, Vacuum only,
and Pressure/Vacuum configurations offer a wide range of solutions with the
support of Parker’s Global Teams.

Applications Features
• Point of Care Diagnostics Low noise dual ball bearing motor design
• Gas Generator Optimized pump balancing for ultra-low vibration
• Compression Therapy
• Water Quality Monitoring Isolation mounts available for simple mounting
• Patient Monitoring RoHS, REACH, and CE compliant

Product Specifications
Physical Properties Pneumatic Electrical
Operating Environment : 1
Maximum Unrestricted Flow: Motor Type (DC):
41 to 122°F (5 to 50°C) Single Head: Up to 5.8 LPM Dual Ball Bearing, Iron Core Brush
Media: Dual Head: Up to 6.1 LPM Nominal Motor Voltages4:
Air, Nitrogen, Oxygen, and other Pressure Range: 6, 12, or 24 Vdc
non-reacting gases Electrical Termination:
Continuous Duty:
Humidity: Up to 20 PSIg (1.4 Bar)
22 AWG Insulated Wire Leads
0 - 80% Relative Humidity Vacuum Range: 10 Inch Length (254 mm)
non-condensing Continuous Duty: Wetted Materials
Pump Assembly Rated Life3 : Up to -21 inHg (-533 mmHg)
Diaphragm:
Dual Ball Bearing Brush Motor Filtration: Long Life - Advanced EPDM
Up to 3,000 Hours
40 microns - recommended Valves:
For life up to 15,000, see BTX-
Connect datasheet EPDM

Compact BLDC Single Head Pump Head:

Weight PBT
Single Head
6.8 oz (193 g)
Dual Head
8 oz (226 g)

Other materials available upon request

 46

BTX-Brush Miniature Diaphragm Pump

Typical Flow Curve
BTX-Brush Single Head
Typical Performance

Miniature Pumps
BTX-Brush Dual Head
Typical Performance

• Single head curve shows maximum flow capability with a 0.090” pump offset, which are vacuum or
pressure only Pumps capable of alternating pressure and vacuum are available with 0.050” pump
offset or less. See ordering table below for a list of available standard options
• Dual head performance shown with pump heads connected in parallel with 0.050˝ pump offset.
• Detailed performance specification sheets are available for each part number
• Contact Parker Precision Fluidics Applications Engineering team for other performance options

The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all
performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application,
follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from
a Parker or its subsidiaries or authorized distributor.
The above graphs represent an example of performance for the pump series handling air at 800 feet (244 m) above sea level at 75 degree F (24 C). Performance
will vary depending on barometric pressure and media temperature. A variety of configurations can be accommodated to meet application requirements.
Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows depending on specific
customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 47

BTX-Brush Miniature Diaphragm Pump

BTX Family Selection
Miniature Pumps

BTX-Brush BTX-Connect

BTX-Brush Dual Head BTX-Connect Dual Head BTX-Connect Dual Head

Dual Ball Bearing Brush Motor Compact BLDC Motor Slotless BLDC Motor
B2B B2C B2S and B2H

BTX-Brush Single Head BTX-Connect Single Head BTX-Connect Single Head

Dual Ball Bearing Brush Motor Compact BLDC Motor Slotless BLDC Motor
B1B B1C B1S and B1H

Efficiency Good Better Best

Flow Rate Up to 6.1 L/min Up to 9.5 L/min Up to 11L/Min

Life Up to 3,000 Hours >15, 000 Hours >15, 000 Hours

Control On/Off, PWM On/Off, Digital, PWM, 0-5V On/Off, Digital, PWM, 0-5V

Protection - Reverse Polarity, Temp, Current Reverse Polarity, Temp, Current

Cost Best Better Good

Mounting Guidelines: Port Connections:

• Bracket options available for mounting • Barbs are sized for 1/8" (3 mm) ID tubing,
consideration (See EZ Mount catalog pages). 70-80 durometer recommended.
• Hole in the center of the bottom housing is for • Flow direction is marked on the pump head
manufacturing only—not to be used for mounting. with arrows.
• Mounting holes are drilled for #6-20 self-tapping
screws with 1/4" (6 mm) thread engagement
torque to 4 in-lbs (0.45 N-m).
 48

BTX-Brush Miniature Diaphragm Pump

Mechanical Drawings

Miniature Pumps
REVISION HISTORY
REV DESCRIPTION BY DATE APPROVED

.47
[12.0]
.40
[10.2]

2.15
2.03
[54.7]
[51.6]

3.10
1.22 [78.6]
1.18 [31.1]
[30.0]
.125
[3.2]
MOUNTING HOLES

.45
[11.5]

UNITS
IN [mm]

.75
[19.1]

NOTES:
MOUNTING HOLES ARE DRILLED FOR
#6-20 SELF-TAPPING SCREWS WITH
1/4" THREAD ENGAGEMENT. .22
[torque to 4 in-lbs.] [5.5]

1.18 .40
PARKER HANNIFIN CORPORATION [30.0] [10.2]
DRAWN .47DATE PART NO. I.D. EXTENSION TITLE
PRECISION FLUIDICS DIVISION
MOORESVILLE, NC 28117
[12.0]
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PRECISION FLUIDICS DIVISION OF ENG DATE
PARKER HANNIFIN CORPORATION ("PARKER").
THIS DOCUMENT IS PUBLISHED ON THE UNDERSTANDING THAT THE DOCUMENT AND THE INFORMATION IT CONTAINS WILL NOT BE
COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THE WRITTEN CONSENT OF PARKER, AND WILL NOT BE USED EXCEPT FOR THE DIRECT DOC DATE
- DO NOT SCALE
DRAWING -
2X .125
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
INCHES. TOLERANCES ARE:
THIRD ANGLE PROJECTION BENEFIT OF PARKER, AND WILL BE RETURNED AND ALL FURTHER USE DISCONTINUED UPON REQUEST BY PARKER. MATERIAL: SIZE DWG NO REV
© PARKER HANNIFIN CORPORATION 2003. ALL RIGHTS RESERVED.
[3.2]: 1/2
.XX : .010 [.254]
ANGULAR
HEAD 1 B
INTERPRET PER ASME PROD DATE
Y14.5M-1994 .XXX : .005 [.127]
FRACTIONAL : 1/64
MOUNTING HOLES SCALE 1:1 SHEET 1 OF 1

.87 2.97 2.73

[22.1] [75.3] [69.2]

.41
[10.4] HEAD 2

3.39
[86.0]

UNITS
IN [mm]

NOTES:
1. MOUNTING HOLES ARE DRILLED FOR
#6-20 SELF-TAPPING SCREWS WITH
1.18 1/4" THREAD ENGAGEMENT.
[30.0] [torque to 4 in-lbs.]
 49

BTX-Brush Miniature Diaphragm Pump

Typical Flow Diagram
Compression Therapy Prevention (DVT)
Miniature Pumps

Air-Over-Liquid Flow Control

 50

BTX-Brush Miniature Diaphragm Pump

Application Notes
Chemical Compatibility Chart*

Miniature Pumps
Compatibility Legend
1. EXCELLENT
Minimal or no effect
2. GOOD
Possible swelling and/or
loss of physical properties
3. LIMITED
Moderate or severe
swelling and loss of
physical properties
4. NOT RECOMMENDED
Severe effect and should
not be considered
Note: Consult factory for
*The above is an Abbreviated Chemical Compatibility Chart. Please other gases.
consult factory for details.

Pulse Width Modulation (PWM)

Pulse-width modulation is a commonly used technique for controlling DC motors.

The average value of the voltage fed to the motor is controlled by turning a switch between the voltage
supply and the motor on-and-off at a fast pace. The longer the switch is on compared to the off time, the
higher the power supplied to the motor.

The PWM switching frequency varies for different types of devices, and is selected based on how it af-
fects the device. For example, some applications require a faster switching frequency to prevent audible
noise or electrical noise.

The term duty cycle describes the ratio of on-time to the period (one complete on-and-off cycle). Duty
cycle is normally expressed as a percentage of on-time, 100% being full-power and 50% being half-
power.

The advantage of PWM is the reduction of power-loss due to switching versus other control methods.
Parker Hannifin recommends controlling the pump using 15kHz - 20 kHz frequency range.
20% PWM Example 50% PWM Example
10 10

9 Frequency: 20kHz 9 Frequency: 20kHz

Period: 50μs Period: 50μs
8 Supply Voltage:5V 8 Supply Voltage:5V
PWM Duty Cycle: 20% PWM Duty Cycle: 50%
7 7
Effective Voltage: 1V Effective Voltage: 2.5V
6 6
Voltage (V)

Voltage (V)

5 5

4 4

3 3

2 2

1 1

0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375
Time in Micro-Seconds (μs) Time in Micro-Seconds (μs)
 51

BTX-Brush Miniature Diaphragm Pump

Accessories Information
Miniature Pumps

A Filter-Muffler is always recommended in the air inlet or outlet to reduce noise and risk of debris
that may affect pump performance.
Parker recommends 40 micron or better filtration to be used with this pump series.

P/N: 00492-15 P/N: 01881-KT

(10 micron Filter) (Parallel Tubing)
 52

BTX-Brush Miniature Diaphragm Pump

EZ Mount available

Miniature Pumps
EZ Mount provides ease of installation and effective control of
vibration transfer. EZ Mount was designed to mount easily to the
Precision Fluidic BTX Family of diaphragm pumps.

Features
Isolation feet on the EZ mount can be rotated in any one of three ninety-degree
planes and is designed for top-down or bottom-up mounting providing
simple installation.
EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weight is: 0.63 oz (18 g).

Physical Properties Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
Operating Environment:
Designed to keep height and size to a minimum.
41 - 158°F (5 - 70°C)
All necessary hardware to attach to a BTX pump is included.
Humidity:
0 - 95% Relative Humidity
Base Plate:
Noryl GTX830
Feet:
Style B Dimensions
1.85
47.1

Silicone
3 POSITIONS IN
90 DEGREE INCREMENTS

Feet Insert:
Brass
Hardware:
2.82 3.50 2.49 1.81 3.16
Zinc-Plated Steel 71.7 88.8 63.1 46 80.3

Isolation Feet are available in either

threaded or thru-hole clearance for
standard #4-40 or #6-32 (M3 for
clearance hole only). 1.18
30
.51
12.9
.84
21.4
1.52
38.5

UNITS
IN. [mm]

EZ Mount for BTX-Brush Single Head EZ-Mount for BTX-Brush Dual Head
(B1B) (B2B)
Part Number Style Feet Type Part Number Style Feet Type

00329-10-A45S B #4-40 Threaded 00332-10-A45S B #4-40 Threaded

00329-10-B45S B #4 Clearance 00332-10-B45S B #4 Clearance
00329-10-D45S B #6-32 Threaded 00332-10-D45S B #6-32 Threaded
00329-10-C45S B #6 / M3 Clearance 00332-10-C45S B #6 / M3 Clearance
 53

BTX-Brush Miniature Diaphragm Pump

Ordering Information
Miniature Pumps

-16 -12 -8 -4 4 8 12 16
0
inHq inHq inHq inHq PSIg PSIg PSIg PSIg
Configuration Voltage Part Number Free
-406 -305 -203 -102 276 552 827 1103
mmHg mmHg mmHg mmHg Flow
mbar mbar mbar mbar
B1B 6 B1B-050A06AN-00 0.9 1.5 2.2 2.9 3.7 3.1 2.6 2.2 1.7

BTX-Brush Single 12 B1B-050A12AN-00 0.9 1.5 2.2 2.9 3.6 3.0 2.6 2.2 1.7
Head 24 B1B-050A24AN-00 0.8 1.4 2.1 2.8 3.6 3.0 2.5 2.1 1.6
6 B1B-090P06AN-00 - - - - 5.9 4.6 3.7 3.0 2.3
12 B1B-090P12AN-00 - - - - 5.9 4.6 3.7 3.0 2.3
24 B1B-090P24AN-00 - - - - 5.7 4.5 3.6 2.9 2.2
6 B1B-090V06AN-00 1.5 2.5 3.6 4.8 5.7 - - - -
12 B1B-090V12AN-00 1.5 2.5 3.6 4.8 5.7 - - - -
24 B1B-090V24AN-00 1.4 2.4 3.5 4.7 5.6 - - - -

B2B 12 B2B-050A12AN-00 1.2 2.4 3.6 5.0 6.1 5.0 4.0 3.2 2.4

BTX-Brush Dual
Head
 54

BTX-Brush Miniature Diaphragm Pump

Ordering Information

Miniature Pumps
Accessories Ordering Table
Part No. Description Comments

Filter to 10 microns.
00492-15 Filter-Muffler
Not included with pump

As needed for parallel flow.

01881-KT Tubing Assembly
Not included with pump

BTX Part Number Description (see Appendix A comment 9)

B 1 B - 090 P 12 A N - 00
Model Pump Heads Motor Type Pump Offset Diaphragm Configuration Voltage Material Tubing Special
A - 80D
B - Brush Mo-
1 - Single 050 - 0.050” AEPDM Dia-
B - BTX tor, Dual Ball P - Pressure Only 6 - 6 Vdc N - None 00 - Factory Standard
Head Offset phragm & low
Bearing
noise Valves

090 - 0.090” 12 - 12
2 - Dual Head V - Vacuum Only
Offset Vdc

A - Universal Pressure &

Vacuum
(High Compression Chamber)
 55

BTX-Brush Miniature Diaphragm Pump

Ordering Information
Miniature Pumps

Please refer to sizing and selection chart for identifying which one will fit your application
To order on-line go to www.parker.com/precisionfluidics/BTX-Brush) to configure your BTX-Brush Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific
application requirements. Providing information on the following requirements will assist us in developing an
optimal solution for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to tailor
the pump configuration when noise is a critical criterion in the effort to meet the performance requirements of the
application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels possible
depending on application.
6. Inductance is an indicator of induced voltage with change in current and it is a key parameter to enable customers’
low energy intrinsic safety systems
7. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the factory
or Applications Engineering.
8. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
9. Part number description for reference only, not all configurations are available or configurable. Contact Parker
Precision Fluidics Applications Engineering team for other performance options.
 56

BTX-Brush Miniature Diaphragm Pump

Serving a broad spectrum of life science, air quality, and process
instrumentation OEM fluidic needs

Miniature Pumps
Providing Pressure and Vacuum:
Broad range of diaphragm pumps for Gas and Liquid

Gas Flow Control:

High to Low Flow Proportional Valves

On/Off & Channel Selection Capabilities:

Gas and Liquid Solenoid Valves

High Precision Thermal Flow Control:

Mass Flow Controllers and Meters
 57
Miniature Pumps

Below are some common specifications that are helpful to have on hand to accelerate
your product selection:

• Gas Type • Standard Reference Conditions

• Maximum Flow Rate • Process Connection Size and Type
• Inlet and Outlet Pressures • Set Point Signal
• Operating Temperature • Digital Communication Protocol Preferences

For more information call +1 603 595 1500 or email ppfinfo@parker.com

Visit www.parker.com/precisionfluidics

Recommendations on application design and material selection are based on available

technical data and are offered as suggestions only. Each user should conduct their own
tests to determine the suitability for their own use. Parker offers no express or implied
warranties concerning the form, fit, or function of a product in any application.
 58

TTC Series Miniature Diaphragm Pumps (air/gas)

Up to 6 LPM Free Flow

TTC Miniature Diaphragm Pumps are a series of brush and brushless

DC motor driven pumps, which are tailored to meet specific

Miniature Pumps
application performance requirements. An innovative compact design
incorporates leading edge technologies that allow them to operate
more efficiently than existing pump designs. TTC Pumps offer multiple
component configurations for use in either vacuum, pressure, or
alternating vacuum and pressure operations. TTC Series is best for
compact and low pressure applications that require high efficiency.

Features
• TTC Series’ innovative and efficient design pushes the performance
Applications envelope in a lightweight, compact size which allows it to operate at
• Gas Analysis the highest performance/size ratio.
• Anesthesia Monitors
• Highest efficiency in class. The TTC supports low power for portable
• Compression Therapy
• CO2 Monitors
and battery powered instruments.
• Wound Therapy • Using our proprietary advanced diaphragm elastomer and superior
• Trace Detection brushless motor design sets the highest benchmark for service-free
• Medical/Training Mannequins operation that exceeds 10,000 hours.
• Degassing
• Incorporating the lightweight EZ Mount accessory facilitates simple
system assembly while dampening vibration and reducing noise levels.
• RoHS compliant.

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment1: Motor Type (DC): Head Configuration:
41 to 122°F (5 to 50°C) PMDC Iron Core Brush, Single
Storage Environment: Brushless Slotted, Brushless Slotless Maximum Unrestricted Flow:
-4 to 212°F (-20 to 100°C) Nominal Motor Voltages4: 6 LPM
Media: 6, 12, or 24 VDC Pressure Range:
Air, Argon, Helium, Nitrogen, Oxygen, Other voltages available upon request 0 - 10 psig (0 - 0.7 bar)
and other non-reacting gases Electrical Termination: Vacuum Range:
Humidity: PMDC Iron Core Brush - 0 - 16 in Hg (0 - 406 mm Hg)
0 – 80% Relative Humidity 22 AWG Wire Leads, Filtration:
Length 10" (254 mm)
Noise Level2 : 40 microns - recommended
As low as 45 dB @ 12 in (30 cm) Brushless Slotted Motor - Efficiency at Free Flow6
22 AWG Wire Leads, PMDC Iron Core Brush:
Muffler recommended for Length 20" (508 mm)
additional noise reduction 0.8 LPM/Watt (PN: TS008-13)
(see accessories) Brushless Slotless - Brushless Slotted:
22 AWG Wire Leads, 1.4 LPM/Watt (PN: TS003-11)
Pump Assembly Rated Life3 : Length 20" (508 mm) Brushless Slotless:
PMDC Iron Core Brush - 3,000 hrs 1.8 LPM/Watt (PN: TS001-13)
Current Range5:
Brushless Slotted - 10,000 hrs
300-800 mA
Brushless Slotless - 10,000 hrs
Weight: Wetted Materials
7.2 oz. (206 g) PMDC Iron Core Brush Diaphragm: Pump Head:
5.0 oz. (142 g) Brushless Slotted
EPDM, AEPDM, FKM Vectra (Liquid Crystal Polymer)
7.7 oz. (218 g) Brushless Slotless
Valves & Gaskets: Valve Cover:
EPDM, FKM 303 Stainless Steel
* See Appendix A for details.
 59

TTC Series Miniature Diaphragm Pumps (air/gas)

Performance Specifications
TTC - Brushless
TTC - BrushlessSlotted
SlottedMotor
Motor
Vacuum (mm Hg) - Pressure (bar)
Miniature Pumps

304.8 203.2 101.6 0 0.28 0.55 0.83

8.0 10.0
9.0
8.0

P ower Usa ge (W)

6.0
7.0
Flow (L P M)

6.0
4.0 5.0
4.0
3.0
2.0
2.0
1.0
- -
12 8 4 0 4 8 12
Vacuum (in Hg) - Pressure (psig)
Max Flow Min Flow
Max Power Min Power

TTC
TTC- Brushless
- BrushlessSlotless Motor
Slotless Motor
Vacuum (mm Hg) - Pressure (bar)

304.8
12 8 203.26 101.6
4 2 00 2 0.28 4 0.55
6 8 0.8312
6.0 7.0

5.0 6.0

P ower Usa ge (W)

5.0
Flow (L P M)

4.0
4.0
3.0
3.0
2.0
2.0

1.0 1.0

- -
12 8 6 4 2 0 2 4 6 8 12
Vacuum (in Hg) - Pressure (psig)
Max Flow Min Flow
Max Power Min Power

The above graph represents an example of performance for the pumps series handling air at 800 feet (244m) above sea level at 75°F (24°C). Performance will
vary depending on barometric pressure and media temperature. Curves are representative of standard pump configurations. Pump configurations could be
customized for higher or lower flows, depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 60

TTC Series Miniature Diaphragm Pumps (air/gas)

Sizing and Selection continued

TTC Series
PMDC Iron Core Brush Brushless Slotted Motor Brushless Slotless Motor

Miniature Pumps
PMDC Iron Core Brush Brushless Slotted Motor Brushless Slotless Motor
Efficiency1 Good Better - Up to 60% motor Best
efficiency at low loads Up to 75% motor efficiency

Life2 Good - 3,000 hrs Best - 10,000 hrs Best - 10,000 hrs
Cost Best Better Premium
Noise Good Better Best

Mounting Guidelines: Port Connections:

• Bracket options available for mounting • Barbs are sized for 1/8” (3 mm) ID tubing,
consideration (See EZ Mount catalog pages). 70-80 durometer recommended.
• Hole in the center of the bottom of housing • Flow direction is marked on the pump head
is for manufacturing only–not to be used with arrows.
for mounting.
• Mounting holes are drilled for #6-20 self-tapping
screws with 1/4” (6 mm) thread engagement,
torque to 4 in-lbs (0.45 N-m). 1/8" ID OR 1.18
3/16" ID 30
TUBING
Mechanical Integration
Dimensions 1.18
30

.47
11.9 1.58
40.2

PMDC Iron Core Brush

1.22
31.1 1.94
1.70
49.2
43.2

3.05
77.5

2X.125
3.2 'E' MOUNTING PATTERN SHOWN
MOUNTING HOLES (OTHER MTG OPTIONS AVAILABLE)

.75
UNITS
19.1
IN. [mm]

NOT TO BE .45
USED FOR 11.5
MOUNTING
 61

TTC Series Miniature Diaphragm Pumps (air/gas)

1/8" ID OR 1.18
3/16" ID 30
TUBING

1.18
Miniature Pumps

Brushless Slotted Motor 30

.47 1.58
11.9 40.2

1.30
33 1.94
1.70
49.2
43.2

2.16
54.9

2X .125 [3.2] "E" MOUNTING PATTERN SHOWN

MOUNTING HOLES (OTHER MTG OPTIONS AVAILABLE)

.75 UNITS
19.1 IN. [mm]

NOT TO BE
USED FOR .45
MOUNTING 11.5

1/8" ID OR 1.18
3/16" ID 30
TUBING

Brushless Slotless Motor

1.18
30

1.58
.47 40.2
11.9

1.10
27.9 1.94
1.70
49.2
43.2

2.90
73.5

2X
.125 'E' MOUNTING PATTERN SHOWN
3.2 (OTHER MTG OPTIONS AVAILABLE)
MOUNTING HOLES

.75 UNITS
19.1 IN. [mm]

NOT TO BE .45
USED FOR
MOUNTING 11.5
 62

TTC Series Miniature Diaphragm Pumps (air/gas)

Electrical Integration and Motor Control

PMDC Iron Core Brush Motor
2 Wire Red (+), Black (-)

Miniature Pumps
Wire specification 22 AWG, Insulation OD 0.051 in (1.30 mm), 10” (254 mm) Wire Leads
Brushless Motor Control Options
2 Wire Red (+), Black (-)
3 Wire (Speed Control) Red (+), Black (-), White (PWM) or Yellow (Analog)
4 Wire (Speed Control & Feedback) Red(+), Black (-), White (PWM) or Yellow (Analog), Blue (Tachometer)
Wire specification 22 AWG, Insulation OD 0.051 in (1.30 mm), 20” (508 mm) Wire Leads
Other Motor Control Considerations
The drive electronics for the BLDC motors are integrated into the motor itself, all that is needed is a
power supply with the sufficient voltage and current.

Key Things to Remember

The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.

Pump orientation does not affect performance or life.

Pulse Width Modulation (PWM)

Pulse-width modulation is a commonly used technique for controlling DC motors.
The average value of the voltage fed to the motor is controlled by turning a switch between the voltage
supply and the motor on-and-off at a fast pace. The longer the switch is on compared to the off time, the
higher the power supplied to the motor.
The PWM switching frequency varies for different types of devices, and is selected based on how it affects
the device. For example, some applications require a faster switching frequency to prevent audible noise
or electrical noise.
The term duty cycle describes the ratio of on-time to the period (one complete on-and-off cycle). Duty
cycle is normally expressed as a percentage of on-time, 100% being full-power and 50% being half-power.
The advantage of PWM is the reduction of power-loss due to switching versus other control methods.
Parker Hannifin recommends controlling the pump using 15kHz - 20 kHz frequency range.
 63

TTC Series Miniature Diaphragm Pumps (air/gas)

Typical Flow Diagram

Air-Over-Liquid Flow Control
Miniature Pumps

IN FROM
ATMOSPHERE
FILTER

PNEUMATIC PUMP

ELECTRONIC
PRESSURE
TTC CONTROLLER
PUMP (EPC)

LIQUID

Accessory Information
Filter-Mufflers also available to assist with filtration and optimize noise reduction.
0.78
.78
19.8
[19.8]

0.20
.20

[5]
5

Part Number: 00492-15

(Filters to 10 microns)

2.39
2.39

[60.7]
60.7

UNITS
IN. [mm]
 64

TTC Series Miniature Diaphragm Pumps (air/gas)

Accessory Information
EZ Mount provides ease of installation and effective control of
EZ Mount available

Miniature Pumps
vibration transfer. EZ Mount was designed to mount easily to the
Precision Fluidic TTC Family of diaphragm pumps.
Features
• Isolation feet on the EZ mount can be rotated in any one of three ninety-
degree planes and is designed for top-down or bottom-up mounting
providing simple installation.
• EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weights are: Style A - 0.63 oz (18 g), Style B - 0.71 oz (20 g).
• Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
• Designed to keep height and size to a minimum.
• Engineered for Parker TTC pumps to ease integration into your system.

Physical Properties Dimensions

Operating Environment: Style A - Brushless Slotted Motor
41 - 158°F (5 - 70°C)
1.85

Humidity:
47.1
3 POSITIONS IN
90 DEGREE INCREMENTS

0 - 95% Relative Humidity

Base Plate:
Noryl GTX830 1.80 2.47 1.46 .78 2.13
45.6 62.8 37.1 19.9 54.2

Feet:
Silicone
Feet Insert:
Brass 1.18
30
.61
15.4
.84
21.4
1.52

Hardware: 38.5

UNITS
Zinc-Plated Steel IN. [mm]

EZ Mount kits include all necessary Style B - PMDC Iron Core Brush Motor
hardware and detailed instructions. 1.85
47.1
3 POSITIONS IN
Isolation Feet are available in either 90 DEGREE INCREMENTS

threaded or thru-hole clearance

for standard #4-40 or #6-32 (M3
for clearance hole only) hardware
and can be mounted in any of three
ninety-degree planes. 2.82
71.7
3.50
88.8
2.49
63.1
1.81
46
3.16
80.3

1.18 .51 .84

30 12.9 21.4
1.52
38.5

UNITS
IN. [mm]
 65

TTC Series Miniature Diaphragm Pumps (air/gas)

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Path Materials
Miniature Pumps

Vectra 303
Chemical FKM EPDM AEPDM PTFE
A130 Stainless
Air 1 1 1 1 1 1
Ozone (1000 ppm) 4 4 4 2 2 2
Oxygen 1 1 1 1 1 1
Ethylene (Ethene) 1 4 1 1 3 2
Acetylene 1 1 1 1 1 1
Propane 1 4 4 1 1 1
Methane 1 4 4 1 1 1
Nitrogen 1 1 1 1 1 1
Carbon Dioxide 1 2 2 1 1 1
Halothane (Up to 5%) 1 4 4 1 1 1
*The above is an Abbreviated Chemical Compatibility Chart. Please consult factory for details.

Compatibility Legend

1. EXCELLENT 3. DOUBTFUL
Minimal or no effect Moderate or severe swelling and loss of
physical properties
2. GOOD
Possible swelling and/or loss of physical 4. NOT RECOMMENDED
properties Severe effect and should not be considered
Note: Consult factory for other gases.

Ordering Information
TTC Single Head Pumps - General Purpose
Vacuum:
Free Pressure:
TTC Single
Part No. HeadLPM
Pumps
@ Load - General
Flow Purpose
LPM @ Load
Max PCD* Wetted Materials

16 Vacuum:
12 8 4 Free 4 Pressure:
8 12 16
Part No. Max PCD* Wetted Materials
in Hg LPM
in Hg @ Load
in Hgin Hg Flow psig LPM
psig @ Load
psig psig Vac Press Motor Diaphragm, Valves,
0 VDC mA
16 12 8 4 4 8 12 16 in Hg psig Type Gasket
406 305 203 102 276 552 827 1103
in Hg
mm in Hg
Hg mm in Hg
Hg mm in Hg
Hg mm Hg psig
mbar psig psig
mbar mbar psig
mbar Vac Press Motor Diaphragm, Valves,
0 VDC mA
406 305 203 102 276 552 827 1103 in Hg psig Type Gasket
Brushless
TS002-12 2.5 3.6
mm Hg mm Hg mm Hg mm Hg5.9 6.1 mbar mbar mbar mbar 16.0 12 520 EPDM
Slotted
Brushless
TS001-13
TS002-12 2.5 3.6 5.9 6.0
6.1 4.9 3.9 3.1 16.0 16.0 12 735
520 EPDM
Slotted
Brushless
TS008-13
TS001-13 6.0 4.7
4.9 3.9 3.2
3.1 16.0 PMDC Brush 12 660
735 EPDM
Slotted
TS008-12
TS008-13 2.5 3.6 4.8 5.8
6.0 4.7 3.9 3.2 16.0 16.0 PMDC Brush 12 500
660 EPDM
Brushless
TS004-22-01
TS008-12 1.9
2.5 2.4
3.6 4.2
4.8 5.6
5.8 16.0 PMDC Brush 12 485
500 EPDM
Slotted
Brushless
TS005-13
TS004-22-01 1.9 2.4 4.2 5.2
5.6 3.9 3.3 2.7 16.0 16.0 12 515
485 EPDM
Slotless
Slotted
Brushless
TS006-12
TS005-13 2.3 3.2 4.1 5.1
5.2 3.9 3.3 2.7 16.0 16.0 12 400
515 EPDM
Slotless
Brushless
TS003-11
TS006-12 1.1
2.3 1.8
3.2 2.7
4.1 3.6
5.1 2.8 2.1 1.5 12.0
16.0 16.0 12 415
400 EPDM
Slotted
Slotless
Brushless
TS007-11
TS003-11 1.1 0.3
1.8 0.8
2.7 1.6
3.6 0.6
2.8 0.3*
2.1 1.5 16.0
12.0 16.0 12 150
415 EPDM
Slotless
Slotted
Brushless *PCD: Peak Current Draw
Note: The Ordering Information Section
TS007-11 0.3 includes
0.8 a few
1.6selected
0.6 part numbers for the product
0.3* 16.0 line. 12 * 150
PCD: Peak Current Draw
EPDM
Slotless
Other performances and configurations are available. Please contact your Sales Representative or an
Application Engineer to discuss your application needs. * PCD: Peak Current Draw
 66

TTC Series Miniature Diaphragm Pumps (air/gas)

Ordering Information
Accessory Information

Miniature Pumps
Filtering Level Internal
Part No. Filter Area Operating Limitations: Wetted Materials
(Micron) Volume

Max Min Max

Max
1.71 in2 0.24 in3 Pressure
00492-15 10 Temperature Temperature Pressure
65 PSI Polypropylene
(11 cm2) (3.9 cm3) 80°C 32°C 65 PSI
(4.48 bar)
Filter-Mufflers: To assist with filtration and optimize noise reduction.
Tubing: Recommendation 1/8" (3mm) ID.

EZ Mount for TTC Single Head Pump with EZ Mount for TTC Single Head Pump with
PMDC Iron Core Brush Motor Brushless Slotted Motor
Part Number Style Description Part Number Style Description
00329-10-A45S B #4-40 Threaded 00328-10-A45S A #4-40 Threaded
00329-10-B45S B #4 Clearance 00328-10-B45S A #4 Clearance
00329-10-D45S B #6-32 Threaded 00328-10-D45S A #6-32 Threaded
00329-10-C45S B #6 / M3 Clearance 00328-10-C45S A #6 / M3 Clearance

EZ Mount for TTC Single Head Pump with

Brushless Slotless Motor
Part Number Style Description
01074-10-A45S B #4-40 Threaded
01074-10-B45S B #4 Clearance
01074-10-D45S B #6-32 Threaded
01074-10-C45S B #6 / M3 Clearance

Please click on the Order On-line button below (or go to www.parker.com/precisionfluidics/ttc) to configure the
TTC Miniature Diaphragm Pump in your application.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific application
requirements. Providing information on the following requirements will assist us in developing an optimal solution
for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control ORDER
• Power Consumption • Media ON-LINE
• Life Requirement • Voltage
• Function in the Application

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.
Rev Date_05/09/05
 67

TTC Series Miniature Diaphragm Pumps (air/gas)

Miniature Pumps

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to
tailor the pump configuration when noise is a critical criterion in the effort to meet the performance requirements
of the application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels
possible depending on application.
6. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
 68

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Up to 11 LPM Free Flow
TTC-IIS Miniature Diaphragm Pumps are a series of brush and
brushless DC motor driven pumps, which are tailored to meet
the specific application performance requirements. An innovative

Miniature Pumps
compact design incorporates leading edge technologies that allow
them to operate more efficiently than existing pump designs. TTC-
IIS pumps offer multiple component configurations allowing them
to be used for either vacuum, pressure, or alternating vacuum and
pressure operations. The TTC-IIS Series is best for compact and low
pressure applications that require high efficiency.

Features
• TTC-IIS Series’ innovative and efficient design pushes the perfor-
mance envelope in a lightweight, compact size which allows it to
Applications operate at the highest performance/size ratio.
• Gas Analysis
• Anesthesia Monitors
• Highest efficiency in class. The TTC-IIS supports low power for por-
• CO2 Monitors
table and battery powered instruments.
• Patient Monitoring • Using our proprietary advanced diaphragm elastomer and superior
• Wound Therapy brushless motor design sets the highest benchmark for service-free
• Urinalysis operation that exceeds 10,000 hours.
• Trace Detection • Incorporating the lightweight EZ Mount accessory facilitates simple
• Medical/Training Mannequins system assembly while dampening vibration and reducing noise
• Degassing levels.
• RoHS compliant.

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment : 1
Motor Type (DC): Head Configuration:
41 to 122°F (5 to 50°C) PMDC Iron Core Brush, Dual
Storage Environment: Brushless Slotted, Brushless Slotless Maximum Unrestricted Flow:
-4 to 212°F (-20 to 100°C) Nominal Motor Voltages4: 6 LPM (Per head), 11 LPM (Parallel)
Media: 6, 12 or 24 VDC Pressure Range:
Air, Argon, Helium, Nitrogen, Oxygen, Other voltages available upon request 0 - 12 psig (0 - 0.8 bar) Parallel
and other non-reacting gases Electrical Termination: Vacuum Range:
Humidity: PMDC Iron Core Brush: 22 AWG 0 - 16 in Hg (0 - 406 mm Hg)
Wire Leads, Length 10" (254 mm)
0 – 80% Relative Humidity Filtration
Brushless Slotted Motor: 22 AWG
Noise Level2 : 40 microns - recommended
Wire Leads, Length 20" (508 mm)
As low as 45dB @ 12 in (30 cm) Efficiency at Free Flow6
Brushless Slotless: 22 AWG Wire
Muffler recommended for Leads, Length 20" (508 mm) PMDC Iron Core Brush:
additional noise reduction 1.2 LPM/Watt (PN: TD001-13)
(see accessories) Current Range5 :
240 - 880 mA Brushless Slotted:
Pump Assembly Rated Life3 : 1.6 LPM/Watt (PN: TD003-11)
PMDC Iron Core Brush - 3,000 hrs Wetted Materials Brushless Slotless:
Brushless Slotted - 10,000 hrs Diaphragm: 1.5 LPM/Watt (PN: TD005-12)
Brushless Slotless - 10,000 hrs
EPDM, AEPDM, FKM
Weight:
Valves & Gaskets:
8.6 oz. (244 g) PMDC Iron Core Brush
EPDM, FKM
6.2 oz. (176 g) Brushless Slotted
Pump Head:
9.0 oz. (255 g) Brushless Slotless
Vectra (Liquid Crystal Polymer)
Valve Cover:
303 Stainless Steel
* See Appendix A for details.
 69

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Performance Specifications
TTC-IIS
TTC-IIS - BrushlessSLOTTED
- BRUSHLESS Slotted Motor
MOTOR
Miniature Pumps

Vacuum (mm Hg) - Pressure (bar)

304.8
12 203.2
8 101.6
4 00 0.28
4 0.558 0.8312
10.0 10.0

8.0 8.0

P ower Usa ge (W)

Flow (L P M)

6.0 6.0

4.0 4.0

2.0 2.0

- -
12 8 4 0 4 8 12
Vacuum (in Hg) - Pressure (psig)

Max Flow Min Flow

Max Power Min Power

TTC-IIS
TTC-IIS - Brushless
BRUSHLESS Slotless Motor
SLOTLESS MOTOR
Vacuum (mm Hg) - Pressure (bar)
304.8 203.2 101.6 0 0.28 0.55 0.83
12 8 4 0 4 8 12
12.0 20.0

10.0
16.0

P ower Usa ge (W)

8.0
Flow (L P M)

12.0
6.0
8.0
4.0

4.0
2.0

- -
12 8 4 0 4 8 12
Vacuum (in Hg) - Pressure (psig)
Max Flow Min Flow
Max Power Min Power

The above graph represents an example of performance for the pumps series handling air at 800 feet (244m) above sea level at 75°F (24°C). Performance will
vary depending on barometric pressure and media temperature. Curves are representative of standard pump configurations. Pump configurations could be
customized for higher or lower flows, depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 70

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Sizing and Selection

TTC-IIS Series
PMDC Iron Core Brush Brushless Slotted Motor Brushless Slotless Motor

Miniature Pumps
PMDC Iron Core Brush Brushless Slotted Motor Brushless Slotless Motor
Efficiency1 Good Better - Up to 60% motor Best - Up to 75% motor
efficiency at low loads efficiency at high power levels

Life2 Good - 3,000 hrs Best - 10,000 hrs Best - 10,000 hrs
Cost Best Better Premium
Noise Good Better Best

Mounting Guidelines: Port Connections:

• Bracket options available for mounting • Barbs are sized for 1/8" (3 mm) ID tubing,
consideration (See EZ Mount catalog pages). 70-80 durometer recommended.
• Hole in the center of the bottom of housing is for • Flow direction is marked on the pump head
manufacturing only–not to be used for mounting. with arrows.
• Mounting holes are drilled for #6-20 self-tapping
screws with 1/4" (6 mm) thread engagement 4
in-lbs. (0.45 N-m).

Mechanical Integration 1.20

30.5

Dimensions
3.37
85.7
.47
1.91
PMDC Iron Core Brush 11.9 HEAD 1 48.5

1.22
31.1
2.58 2.10 .87
65.6 53.5 22.1

NOT TO BE
USED FOR
MOUNTING 2X .125
HEAD 2 .41
3.2
10.4
MOUNTING HOLES

.40
10.2

UNITS
IN. [mm]

1.58
40.2
 71

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Mechanical Integration
Miniature Pumps

1.20
Brushless Slotted Motor 30.5

2.48
63.1
.47 1.91
HEAD 1
11.9 48.5

1.30
33.0
2.58 2.10 .87
65.6 53.5 22.1

2X .125
NOT TO BE 3.2
USED FOR .41
HEAD 2 MOUNTING HOLES
MOUNTING 10.4

.40
10.2

UNITS
IN. [mm]

1.58
40.2

1.20
30.5

Brushless Slotless Motor

3.24
82.4

1.91
.47 48.5
11.9
HEAD 1

2.58 2.10 .87

65.6 53.5 22.1

1.10
27.9 NOT TO BE
USED FOR 2X .125
MOUNTING 3.2
HEAD 2
.41 MOUNTING HOLES
10.4

.40
10.2

UNITS
IN. [mm]

1.58
40.2
 72

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Electrical Integration and Motor Control

PMDC Iron Core Brush Motor
2 Wire Red (+), Black (-)

Miniature Pumps
Wire specification 22 AWG, Insulation OD 0.051 in (1.30 mm), 10” (254 mm) Wire Leads
Brushless Motor Control Options
2 Wire Red (+), Black (-)
3 Wire (Speed Control) Red (+), Black (-), White (PWM) or Yellow (Analog)
4 Wire (Speed Control & Feedback) Red(+), Black (-), White (PWM) or Yellow (Analog), Blue (Tachometer)
Wire specification 22 AWG, Insulation OD 0.051 in (1.30 mm), 20” (508 mm) Wire Leads
Other Motor Control Considerations
The drive electronics for the BLDC motors are integrated into the motor itself, all that is needed is a
power supply with the sufficient voltage and current.

Key Things to Remember

The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.

Pump orientation does not affect performance or life.

Pulse Width Modulation (PWM)

Pulse-width modulation is a commonly used technique for controlling DC motors.
The average value of the voltage fed to the motor is controlled by turning a switch between the voltage
supply and the motor on-and-off at a fast pace. The longer the switch is on compared to the off time, the
higher the power supplied to the motor.
The PWM switching frequency varies for different types of devices, and is selected based on how it affects
the device. For example, some applications require a faster switching frequency to prevent audible noise
or electrical noise.
The term duty cycle describes the ratio of on-time to the period (one complete on-and-off cycle). Duty
cycle is normally expressed as a percentage of on-time, 100% being full-power and 50% being half-power.
The advantage of PWM is the reduction of power-loss due to switching versus other control methods.
Parker Hannifin recommends controlling the pump using 15kHz - 20 kHz frequency range.
 73

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Typical Flow Diagram

Compression Therapy Prevention (DVT)
PNEUMATIC PUMP
Miniature Pumps

IN FROM
ATMOSPHERE
FILTER
TTC-IIS
PUMP

OUT TO
BLADDER 1
ATMOSPHERE
FILTER

BLADDER 2

VALVE
MANIFOLD
BLADDER 3

Accessory Information
Filter-Mufflers also available to assist with filtration and optimize noise reduction.
0.78
.78
19.8
[19.8]

0.20
.20

[5]
5

Part Number: 00492-15

(Filters to 10 microns)
2.39
2.39

[60.7]
60.7

UNITS
IN. [mm]
 74

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Accessory Information
EZ Mount available EZ Mount provides ease of installation and effective control of
vibration transfer. EZ Mount was designed to mount easily to the

Miniature Pumps
Precision Fluidic TTC-IIS Family of diaphragm pumps.
Features
• Isolation feet on the EZ mount can be rotated in any one of three ninety-
degree planes and is designed for top-down or bottom-up mounting
providing simple installation.
• EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weights are: Style A - 0.63 oz (18 g), Style B - 0.71 oz (20 g).
• Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
• Designed to keep height and size to a minimum.
• Engineered for Parker TTC-IIS pumps to ease integration into your system.

Physical Properties Dimensions

Operating Environment: Style A - Brushless Slotted Motor
41 - 158°F (5 - 70°C)
1.85
47.1
Humidity: 3 POSITIONS IN
90 DEGREE INCREMENTS

0 - 95% Relative Humidity

Base Plate:
Noryl GTX830 1.80 2.47 1.46 .78 2.13
45.6 62.8 37.1 19.9 54.2

Feet:
Silicone
Feet Insert:
Brass 1.18
30
.61
15.4
.84
21.4
1.52

Hardware: 38.5

UNITS
Zinc-Plated Steel IN. [mm]

EZ Mount kits include all necessary Style B - PMDC Iron Core Brush Motor
hardware and detailed instructions. 1.85
47.1
3 POSITIONS IN

Isolation Feet are available in either 90 DEGREE INCREMENTS

threaded or thru-hole clearance

for standard #4-40 or #6-32 (M3
for clearance hole only) hardware
and can be mounted in any of three
ninety-degree planes. 2.82
71.7
3.50
88.8
2.49
63.1
1.81
46
3.16
80.3

1.18 .51 .84

30 12.9 21.4
1.52
38.5

UNITS
IN. [mm]
 75

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Path Materials
Miniature Pumps

Vectra 303
Chemical FKM EPDM AEPDM PTFE
A130 Stainless
Air 1 1 1 1 1 1
Ozone (1000 ppm) 4 4 4 2 2 2
Oxygen 1 1 1 1 1 1
Ethylene (Ethene) 1 4 1 1 3 2
Acetylene 1 1 1 1 1 1
Propane 1 4 4 1 1 1
Methane 1 4 4 1 1 1
Nitrogen 1 1 1 1 1 1
Carbon Dioxide 1 2 2 1 1 1
Halothane (Up to 5%) 1 4 4 1 1 1
*The above is an Abbreviated Chemical Compatibility Chart. Please consult factory for details.

Compatibility Legend

1. EXCELLENT 3. DOUBTFUL
Minimal or no effect Moderate or severe swelling and loss of
physical properties
2. GOOD
Possible swelling and/or loss of physical 4. NOT RECOMMENDED
properties Severe effect and should not be considered
Note: Consult factory for other gases.

Ordering Information
TTC-IIS Dual Head Pumps - General Purpose
Vacuum: Free Pressure:
Part No. Max PCD* Wetted Materials
LPM @ Load Flow LPM @ Load
16 12 8 4 4 8 12 16
in Hg in Hg in Hg in Hg psig psig psig psig Vac Press Motor Diaphragm, Valves,
0 VDC mA
406 305 203 102 276 55 827 1103 in Hg psig Type Gasket
mm Hg mm Hg mm Hg mm Hg mbar mbar mbar mbar
Brushless
TD003-11 1.7 3.0 4.8 6.5 4.8 3.2 2.1 12.0 16.0 12 570 AEPDM, EPDM, EPDM
Slotted

TTC-IIS Dual Head Pumps - High Flow

Vacuum: Free Pressure:
Part No. Max PCD* Wetted Materials
LPM @ Load Flow LPM @ Load
16 12 8 4 4 8 12 16
in Hg in Hg in Hg in Hg psig psig psig psig Vac Press Motor Diaphragm, Valves,
0 VDC mA
406 305 203 102 276 55 827 1103
in Hg psig Type Gasket
mm Hg mm Hg mm Hg mm Hg mbar mbar mbar mbar

Brushless
TD001-13 6.8 4.9 3.4 2.4 1.5 16.0 12 630 EPDM
Slotted
Brushless
TD004-13 8.5 6.1 4.2 2.9 16.0 12 880 EPDM
Slotted
Brushless
TD005-12 3.8 5.5 7.4 8.8 12.0 12 630 EPDM
Slotless
Brushless
TD002-13 8.5 6.1 4.2 2.9 16.0 12 770 EPDM
Slotted
Note: The Ordering Information Section includes a few selected part numbers for the product line.
Other performances and configurations are available. Please contact your Sales Representative or an
Application Engineer to discuss your application needs.
 76

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Ordering Information
Accessory Information

Miniature Pumps
Filtering Level Internal
Part No. Filter Area Operating Limitations: Wetted Materials
(Micron) Volume

Max Min Max

Max
1.71 in2 0.24 in3 Pressure
00492-15 10 Temperature Temperature Pressure
65 PSI Polypropylene
(11 cm2) (3.9 cm3) 80°C 32°C 65 PSI
(4.48 bar)
Filter-Mufflers: To assist with filtration and optimize noise reduction.
Tubing: Recommendation 1/8" (3mm) ID.

EZ Mount for TTC-IIS Dual Head Pump with EZ Mount for TTC-IIS Dual Head Pump with
PMDC Iron Core Brush Motor Brushless Slotted Motor
Part Number Style Description Part Number Style Description
00332-10-A45S B #4-40 Threaded 00328-10-A45S A #4-40 Threaded
00332-10-B45S B #4 Clearance 00328-10-B45S A #4 Clearance
00332-10-D45S B #6-32 Threaded 00328-10-D45S A #6-32 Threaded
00332-10-C45S B #6 / M3 Clearance 00328-10-C45S A #6 / M3 Clearance

EZ Mount for TTC-IIS Dual Head Pump with

Brushless Slotless Motor
Part Number Style Description
01074-10-A45S B #4-40 Threaded
01074-10-B45S B #4 Clearance
01074-10-D45S B #6-32 Threaded
01074-10-C45S B #6 / M3 Clearance

to order on-line go to www.parker.com/precisionfluidics/ttciis) to configure the TTC-IIS Miniature Diaphragm Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific application
requirements. Providing information on the following requirements will assist us in developing an optimal solution
for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage
• Description of pump function
in the application

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Rev Date_05/09/05
 77

TTC-IIS Series Miniature Diaphragm Pumps (air/gas)

Appendix A
Miniature Pumps

All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to
tailor the pump configuration when noise is a critical criterion in the effort to meet the performance requirements
of the application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels
possible depending on application.
6. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
 78

T2-04 Micro Diaphragm Pumps (air/gas)

Up to 6.7 LPM Free Flow
The T2-04 is a high flow and ultra compact pump that is ideal for
portable air and gas detection applications. Delivering flow up to 6.7
lpm, the pump works well in environments where high efficiency for

Miniature Pumps
extended battery life, high performance, low cost, minimal weight, and
compact size are critical.

Features
• The pump with patented valve design is optimized to provide best-in-
class efficiency/size ratio especially for low vacuum applications. Low
power consumption enables longer battery life for small instruments.
• The pump fits into the tight spaces demanded of today’s battery-
powered instruments. The lightweight design keeps the instrument
weight minimized.
• The high efficiency coreless brush motor can satisfy intrinsic safety
requirements. It has been proven in applications for sampling of
Applications medical gases, hazardous gases, particles, and aerosols in a range
• Particle Detection of fixed and portable instruments.
• Pathogen Detection • Compact dual head design with internal flow paths that require
• Compression Therapy only one set of barbs for intake and discharge simplifies plumbing
• Wound Therapy
requirements
• Fuel Cell
• RoHS Compliant

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment : 1
Motor Type: Head Configuration:
32 to 122°F (0 to 50°C) High Efficiency Coreless Brush Dual (Single Ported)
Storage Temperature: Nominal Motor Voltages : 4 Maximum Flow:
14 to 122°F (-10 to 50°C) 6 VDC 6.7 lpm
Media: Max Power in Continuous Range: Maximum Intermittent Pressure7:
Air, Argon, Helium, Nitrogen, Oxygen, 2.6 Watts 16 psi (1103 mbar)
and other non-reacting gases Maximum Continuous Pressure:
Electrical Termination:
Humidity: 2 psi (138 mbar)
28 AWG Wire Leads
5-95% Relative Humidity lead length 5" (127 mm) Maximum Intermittent Vacuum7:
Noise Level : 2
Current Range :5
-18.7 in Hg (-475 mm Hg)
As low as 45dB 50 - 425 mA Maximum Continuous Vacuum:
Pump Assembly Rated Life3: Inductance6: -4 in Hg (-101 mm Hg)
Up to 5,000 hrs Coreless Brush: Filtration:
Weight: 0.266 mH max @ 1kHz/50mV
40 micron recommended
3.3 oz (94 g) Efficiency at Free Flow8:
Coreless Brush Motor:
Wetted Materials 10 LPM/Watt @ 3 VDC
(P/N: T4-2HE-06-1SCA)
Diaphragm: Pump Head:
Neoprene Rubber Polyphthalamide (PPA)
Valves:
Silicone
* See Appendix A for details.
 79

T2-04 Micro Diaphragm Pumps (air/gas)

Typical Flow Curve

T2‐04 T2-04
‐ Coreless
CorelessBrush Motor
Brush Motor
Vacuum (mmHg) ‐ Pressure (mbar)
Miniature Pumps

‐356 ‐305‐ 254 ‐203 ‐152 ‐102 ‐51 0 69 138 207 276 345 414 483 552 621
8 4.0
7 3.5
6 3.0

Power Usage (W)

5 intermittent intermittent 2.5
Flow (LPM)

duty duty
4 2.0
3 1.5
2 1.0
1 0.5
0 0.0
‐16 ‐14 ‐12 ‐10 ‐8 ‐6 ‐4 ‐2 0 1 2 3 4 5 6 7 8 9
Vacuum (inHg) ‐ Pressure (psig)
Max Flow ‐ 6V Min Flow ‐ 3V
Max Power ‐ 6V Min Power ‐ 3 V

The above graphs represent examples of performance for the pumps series handling air at 800 feet (244M) above sea level at 75° F (24° C). Performance
will vary depending on barometric pressure and media temperature.
Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows, depending on specific
customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations

Sizing and Selection

T2-04 Coreless Brush
Series Motor

Mounting Guidelines: Port Connections:

• Parker recommends using a nylon cable tie • Barbs are sized for 1/4” ID tubing, 70-80
with a length of at least 4” (100 mm). durometer recommended
 80

T2-04 Micro Diaphragm Pumps (air/gas)

Mechanical Integration
Dimensions T2-04 Pump/TH Version
.32 8.1

Miniature Pumps
1/4" Hose Barbs
.21 5.4

.43 10.8

.87 22

.81 20.5 .80 20.2

Coreless Brush Motor 2.16 54.8

R .46 11.7

.87 22 UNITS
IN. [mm]

2.27 57.8

Electrical Integration and Motor Control

If application requires variable flow, motor control options are available, as follows:

Brush Motor
2 Wire Red (+), Black (-)
Wire specification 28 AWG 5" (127 mm) Wire Leads

Key Things to Remember

5" (127mm) flying Leads are the standard electrical connection method to the pump. Contact
Applications for other connection requirements.

The pump lead wires are non-polarized.

The pump can be controlled by DC voltage or PWM through a control board supplied by the
customer. The minimum recommended PWM frequency is 20kHz.

The pump flow and pressure can be controlled by adjusting the input voltage.

The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.

Pump orientation does not affect performance or life.

 81

T2-04 Micro Diaphragm Pumps (air/gas)

Typical Flow Diagram

Gas DIAGRAM
T2-04 PUMP Detection
Miniature Pumps

DISPLAY / ALARM

FILTER
IN FROM
ATMOSPHERE
T2-04
PUMP

SENSOR BOARD
OUT TO
ATMOSPHERE

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Path Compatibility Legend
Materials
Neoprene 1. EXCELLENT
Chemical PPA Silicone Minimal or no effect
Rubber(CR)
Air 1 1 1 2. GOOD
Ozone (1000 ppm) 3 1 1 Possible swelling and/or
Oxygen 1 1 2 loss of physical properties
Ethylene (Ethene) 1 1 4 3. DOUBTFUL
Acetylene 2 1 3 Moderate or severe swell-
ing and loss of physical
Propane 1 1 4
properties
Methane 2 1 4
4. NOT RECOMMENDED
Nitrogen 1 1 1
Severe effect and should
Carbon Dioxide 1 1 2 not be considered
Halothane (Up to 5%) 4 1 4
Note: Consult factory for
*The above is an Abbreviated Chemical Compatibility Chart. Please other gases.
consult factory for details.
 82

T2-04 Micro Diaphragm Pumps (air/gas)

Ordering Information
T2-04 Mini Pumps
Max
Vacuum: Free Pressure: Peak Wetted
Configuration Continuous
LPM @ Load Flow LPM @ Load
Pressure Current1 Materials
2

Miniature Pumps
-4 -2 4 8
Part No.
inHg inHg psig psig Vac Press Motor Diaphragm,
0 VDC mA
inHg psig Type Valves, Gasket
-101 -50 276 552
mmHg mmHg mbar mbar

Coreless
T4-2HE-06-1SCA 4.1 5.3 6.7 6.0 5.0 -4 2 6 425 CR, VMQ, EPDM
Brush
1. Peak current draw in continous operating range 2. CR: Neoprene, VMQ: Silicone, EPDM: Ethylene Propylene Diene Monomer
Note: Other part number could be available for specific application configurations

To order on-line go to www.parker.com/precisionfluidics/t4) to configure the T2-04 micro pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field
Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise to
our customers in order to configure and recommend the optimal pump for the application. Contact Parker Applica-
tions Engineering to discuss and configure alternate pump configurations to meet your specific application require-
ments. Providing information on the following requirements will assist us in developing an optimal solution for your
application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage
• Function in the Application
Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to
tailor the pump configuration when noise is a critical criterion in the effort to meet the performance requirements
of the application. Noise level is tested to Parker protocol P-105.
3. Life rating can vary depending on application and operating conditions.
4. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
5. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels
possible depending on application.
6. Inductance can be used to measure the viability of a component in a device requiring intrinsic safety.
7. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the
Rev Date_05/09/05
factory or Applications Engineering.
8. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
 83

Helix Miniature High Pressure Pump

Up to 100 PSI (6.9 bar)

The Helix is a compact, high pressure pump designed to enable the

Miniature Pumps

smallest of point-of-care instruments. Helix enables high pressure operation

in challenging high altitude environments and applications where external
compressed air is not available. Delivering more than 5.5 LPM flow and
pressure up to 100 PSI (6.9 bar), the Helix pump provides the best solution
for bench-top diagnostic devices where performance is critical and space
is limited.

Markets Features
• Point-of-Care Testing • Integrated unloading X-Valve enables high pressure restarts
• Molecular Diagnostics
• Internal flywheel for low speed operation at high pressure
• Nucleic Acid Purification
• Genomics • Oil free piston
• Simple mounting features
Applications • Fast fluid connections with push-in fittings
• Air Over Liquid • RoHS and REACH compliant
• Pneumatic Actuation
• Microfluidic Chips

Product Specifications
Physical Properties Pneumatic Electrical
Operating Environment1 : Maximum Unrestricted Flow: Motor Type (DC):
41 to 113°F (5 to 45°C) Up to 5.5 LPM @ 3000 RPM Brushless DC Motor
Storage Environment : Pressure Range: Nominal Motor Voltages:
-22 to 158°F (-30 to 70°C) Pressure Only Operation 24 VDC
Humidity: Continuous Duty: 60 PSIG (4.1 Barg) Other voltages available upon request
Up to 80% Relative Humidity Operating @1400 RPM Electrical Termination:
Non-condensing (1.5 Vdc Control) 4.4 inch (110mm) Wire Length
Wetted Materials: Intermittent Duty: Up to 100 PSIG Connector: Molex 43645-0400
PPS, FKM, EPDM, PTFE (6.9 Barg) Pin 1: Tachometer Speed (Green)
Aluminum, 316 Stainless Steel Pneumatic Connections: Pin 2: 0-5VDC Input (White)
The Helix pump is not sealed and 6mm Male Ports for Push-in Fittings Pin 3: + VDC Power (Red)
not designed to pump gases that Unloading Valve: Pin 4: -Ground (Black)
cannot escape to the environment Valve Type: 2-Way NO X-Valve Electrical Termination:
Weight: Continuous Duty: 100 PSIg 12 inch (305mm) Wire Length
Helix pump with Unloading Valve: (6.9 Barg)
20.3 oz (576 g) Voltage: 24 VDC
Power: 1 Watt
 84

Helix Miniature High Pressure Pump

Typical Flow Curve
Typical Flow Performance - 0.080” Offset
1.5 VDC Control Input - 1400 RPM

Miniature Pumps
Typical Flow Performance - 0.080” Offset
3.0 VDC Control Input - 3000 RPM

• Curves show flow capability with 0.080” pump offset.

• With a 5.0 Vdc control input the pump will operate at approximately 4400 RPM and up to 8.5 LPM, but
not recommended for continuous operation.
 85

Helix Miniature High Pressure Pump

Mounting Guidelines
• Mounting holes are provided on both sides of the pump body. The 6x mounting holes are tapped
Miniature Pumps

for M4x0.7 machine screws, with a maximum depth of 0.4 inches [10.2 mm]

Pneumatic Port Connections

• The Helix pump has 2 straight 6mm ports designed to connect with 6mm push-in-fittings
• Parker has a 6mm to 6mm push-in fitting available as an accessory. The port is designed to work
with most industry standard push-in adapters.
• Tubing rated for >100 PSIG (6.9 barg) is recommended.

Mechanical Drawings
.06 X 45° Chamfer

.39
[9.9]

.47
[12.0]

.70
[17.8] .63
.24 [15.9]
[6.0]
12.00
MOUNTING HOLES [304.8]
(3X ON BOTH SIDES) UNLOADING VALVE WIRE LEADS
MOTOR ELECTRICAL [M4x0.7]
CONNECTOR MAX THREAD DEPTH 0.4 [10.2]

3.32
[84.3]

1.75
[44.5]

4.33 .32
[110.0 8.0]

1.93
[49.0] .98 .05
[25.0] [1.3] UNITS
3.44 IN [MM]
[87.3]
 86

Helix Miniature High Pressure Pump

Electrical Integration and Motor Control

Motor Electrical Connection

Miniature Pumps
Intregrated Electrical Manufacturer: Molex
Housing Part Number: 43645-0400
Connector
Terminal Part Number: 43030-0002
Electrical Integration and Motor
Pin 1: Control
Tachometer (Green)
Pin 2: 0-5VDC Input (White)
Termination
Motor Electrical Connection Pin 3: + VDC Power (Red)
Pin 4: -Ground Molex
Manufacturer: (Black) Pin 1 - Connector - Mate side
Intregrated Electrical
Housing
UL AWMPartStyleNumber:
1006 43645-0400
Connector
Wire Specification Terminal
+VDC andPart Number:
Ground: 43030-0002
20 AWG
0-5VDC Input and Tachometer:
Pin 1: Tachometer (Green) 24 AWG
Pin 2: 0-5VDC Input (White)
Motor Supply Power Electrical Details
Termination
Pin 3: + VDC Power (Red)
Supply Voltage Range Pin 4: -Ground
10-28 VDC (Black)
Internal Protection Current Limit UL
2.3 AWM
Amp Style 1006
Wire Specification +VDC and Ground: 20 AWG
0-5VDC Control Electrical Details 0-5VDC Input and Tachometer: 24 AWG

Motor Supply
On Power
Board Electrical Details
0-5VDC input
See circuit details below
Motor
Supply Circuit
Voltage Range 10-28 VDC
If the input is disconnected (floating input) the pump will not operate.
Internal Protection Current Limit 2.3 Amp
User Control Circuit User must supply 0 to 5 VDC analog signal for control
0-5VDC Control
Tachometer Electrical
Electrical Details
Details
OnSignal
BoardOutput 0-5VDC
0-5VDCinput
square wave
Speed See circuit per
details belowof the pump
Motor Circuit 18 Pulses rotation
If the input is disconnected (floating input) the pump will not operate.
See circuit details below
On Board
User Motor
Control Circuit
Circuit User
Low must
signalsupply
will be0<0.5VDC,
to 5 VDC High
analog signal
will for control
be >4.0VDC
Tachometer Electrical
Unloading Valve Details
Electrical Connection
0-5VDC
Strippedsquare wave
and Tinned
Speed Signal Output
Termination 18 Pulses per
Non-Polarized rotation of the pump
See circuit
UL AWM details
Style below
1007
OnWire
Board Motor Circuit
Specification Low signal will
26 AWG, 7 Strand be <0.5VDC, High will be >4.0VDC
Speed Control Diagram Tachometer Diagram
Unloading
Unloading Valve
Valve Electrical Connection
Supply Power Electrical Details
Supply Voltage Range Stripped and Tinned
24 VDC ±10%
Termination Non-Polarized
Coil Resistance 549 Ohms ±5%
UL AWM Style 1007
Wire Specification
26 AWG, 7 Strand
Other Motor Control Considerations
Unloading Valve Supply
The drive electronics Power
for the BLDCElectrical
motors areDetails
integrated into the motor itself, all that is needed is a
power supply
Supply with the
Voltage sufficient voltage
Range 24 VDCand current.
±10%
Coil Resistance 549 Ohms ±5%

Other Motor Control Considerations

The drive electronics for the BLDC motors are integrated into the motor itself, all that is needed is a
power supply with the sufficient voltage and current.
 87

Helix Miniature High Pressure Pump

Typical Flow Diagram

Point of Care Test System (POCT)

Miniature Pumps

Electronic
Pressure
Controller
Check Valve

Accumulator
HELIX

Helix Pump

Manifold C7 Valve C7 Valve X-Valve Series MX VSO® LowPro

Cartridge

Filter

Sample Prep Cell Lysis Nucleic Acid Amplification Detection

/Introduction Purification

Application Notes
Unloading Valve:
A common application for the Helix is intermittently recharging a pressure accumulator in a compact system. The
integrated unloading X-Valve removes pressure from the pump head, allowing the pump to restart against system
pressures as high as 100 PSIG (6.9 Barg).

When operating the pump to pressurize the accumulator, the valve should be powered to close the valve. When the
charge pressure has been achieved and the pump turned off, the solenoid valve power should be removed, so the
normally-open valve will vent the pump internal pressure to atmosphere.

It is recommended to use a check-valve between the outlet and accumulator to hold pressure in the system (the Helix
pump is not designed to be leak-tight).

Pump Schematic with Unloading X-Valve:

Operating Conditions
When operating at high pressure (>60 PSIG [4.14 barg]) and high speed (>1500 RPM) the Helix pump may generate
significant heat. It is recommended to maintain a head temperature below 105ºC. With intermittent operation no
cooling should be required; however, if the pump is operated continuously cooling may be necessary.
 88

Helix Miniature High Pressure Pump

Accessories Information

A Filter-Muffler is always recommended in the air inlet or outlet to reduce noise and risk of debris

Miniature Pumps
that may affect pump performance. Parker recommends 40 micron or better filtration to be used with
this pump series.

6mm Push-In Fittings are recommended to connect the Helix pump pneumatic ports to tubing.

P/N: 00492-15 P/N: 00085-15-0001 P/N: 20934-15

(10 micron Filter) (0.01 micron Filter) (6mm to 6mm Legris Connector)

Ordering Information
15 30 45 60 75 90
Speed at 0
PSIg PSIg PSIg PSIg PSIg PSIg
Motor Free Flow
Configuration Voltage Part Number 5.2 6.2
Control 3.0 Vdc Free 1.0 2.1 3.1 4.1
Control Flow Bar Bar Bar Bar Bar Bar

H1R
Helix Single Head 24 0-5 Vdc 2950 H1R-080P24HV-02 5.5 4.3 3.6 2.9 2.2 1.4 0.7
with Unloading Valve

Part Number Description

Accessories Ordering Table

Part No. Description Comments
00492-15 Filter-Muffler - 1/8” / 4mm Barbs Filter to 10 microns
00085-15-0001 Filter-Muffler - Straight 1/4” Port Filter to 0.01 microns
20934-15 6mm to 6mm Legris Connector Connects 6mm tubing to Helix pneumatic ports
 89

Helix Miniature High Pressure Pump

Ordering Information
Miniature Pumps

Please refer to sizing and selection chart for identifying which one will fit your application
To order on-line go to www.parker.com/precisionfluidics/HelixPump to configure your Helix Pump.

Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
nor is it recommended to service these in the field

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific
application requirements. Providing information on the following requirements will assist us in developing an
optimal solution for your application:
• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Noise is dependent on the configuration and operation of the pump in the application. Parker has the ability to tailor
the pump configuration when noise is a critical criterion in the effort to meet the performance requirements of the
application. Noise level is tested to Parker protocol P-105.
2. Life rating can vary depending on application and operating conditions.
3. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
4. Maximum intermittent pressure/vacuum data is a pump capability guideline for applications that go beyond the
maximum continuous levels for short periods of time. Please consult customer specific requirements with the factory
or Applications Engineering.
 90

Helix Miniature High Pressure Pump

Miniature Pumps
Learn More at: discover.parker.com/HelixPump
Below are some common specifications that are helpful to have on hand to accelerate
your product selection:

• Gas Type • Standard Reference Conditions

• Maximum Flow Rate • Process Connection Size and Type
• Inlet and Outlet Pressures • Set Point Signal
• Operating Temperature • Digital Communication Protocol Preferences

For more information call +1 603 595 1500 or email ppfinfo@parker.com

Visit www.parker.com/precisionfluidics

Recommendations on application design and material selection are based on available

technical data and are offered as suggestions only. Each user should conduct their own
tests to determine the suitability for their own use. Parker offers no express or implied
warranties concerning the form, fit, or function of a product in any application.
 91

LTC Series Miniature Diaphragm Pumps (liquid)

Up to 1.7 LPM Free Flow
Miniature Pumps

LTC Miniature Diaphragm Pumps are offered in both brush and

brushless DC motor drives that can be configured for your specific
performance requirements and handle a wide range of liquid
media over a wide range of pressures. LTC’s patented Fluid-Blok™
Advanced Sealing Technology provides redundant sealing capabilities
to eliminate potential leaks. Monolithic diaphragm design enables
maximum suction, priming, and continuous dry operation. Ideal for
waste, transfer and bulk movement of liquids.
Features
• LTC Series Pumps set the highest benchmark for service free life-
expectancy with our advanced proprietary diaphragm elastomer.
Markets
• Multiple port designs available for simple integration: Barb tubing
• Clinical Diagnostics connection, 6MM compression fitting, or 1/4-28 UNF threads with top
• Analytical Chemistry and bottom face sealing.
• Printing
• Overmolded diaphragm eliminates metal components in the wetted
path resulting in a design that is inert to variety of media.
Applications
• Incorporating the lightweight EZ Mount Accessory facilitates simple
• Clinical Chemistry
system assembly while dampening vibration and reducing noise
• Wash and Waste Circuits
levels.
• Urinalysis
• Liquid Chromatography • Our 100% oil and grease-free pump and compressor design main-
• Large Format Printers tains the purity of your system and are commonly used in FDA-ap-
• Photo Processing Printers proved systems.
• RoHS Compliant

Product Specifications*
Physical Properties Electrical Pneumatic
Operating Environment : 1 Motor Type (DC): Head Configuration:
41 to 122°F (5 to 50°C) PMDC Iron Core Brush, Single
Storage Environment : Brushless Slotted Dual Head
-4 to 212°F (-20 to 100°C) Nominal Motor Voltages3: Maximum Unrestricted Flow:
Media: 12, or 24 VDC 1.0 LPM single head
Most Gases and Liquids Other voltages available upon request 1.7 LPM dual head in parallel
Humidity: Electrical Termination: Pressure Range (Liquid):
0 – 95% Relative Humidity PMDC Iron Core Brush: 22 AWG 0 - 30 psig (0 - 193 kPa)
Pump Assembly Rated Life2: Wire Leads, Length 10” (254 mm) Vacuum Range (Air):
PMDC Iron Core Brush - 3,000 hrs Brushless Slotted Motor: 22 AWG 0 - 14.5 in Hg (0 - 368 mm Hg)
Wire Leads, Length 20” (508 mm)
Brushless Slotted - 10,000 hrs Filtration:
Weight: Wetted Materials 40 microns - recommended
7.0 oz. (198 g) single head PMDC Diaphragm:
Iron Core Brush EPDM, AEPDM, FKM,
5.0 oz. (142 g) single head PTFE /EPDM Laminate
Brushless Slotted Valves:
11.7 oz. (333 g) dual head EPDM, AEPDM, FKM, FFKM
Brushless Slotted (High Torque) Pump Head:
Vectra (Liquid Crystal Polymer)
* See Appendix A for details.
 92

LTC Series Miniature Diaphragm Pumps (liquid)

Performance Specifications

Miniature Pumps
LTC Single and Dual Head Typical Flow

LTC Single and Dual Typical Flow

Pressure (mBar(g))
0 500 1000 1500 2000
1800 12.0
1600 11.5
1400 11.0

Power Consumption (W)

1200 10.5
1000 10.0
Flow (mLPM)

800 9.5
600 9.0
400 8.5
200 8.0
0 7.5
0 5 10 15 20 25 30
Pressure (PSIg)
Single Head Flow Dual Head Flow
Single Head Power Dual Head Power

Typical flow performance is shown with standard high flow configurations with barb ports and brushless DC motor. Performance will vary depending on port
and motor selection. Please contact Parker for the typical flow performance for a specific part number and configuration.
All LTC performance data is collected using water at 800 feet (244m) above sea level at 75°F (24°C). Performance will vary depending on barometric pressure
and media temperature. Curves are representative of standard pump configurations. Pump configurations could be customized for higher or lower flows,
depending on specific customer requirements.
Please contact Parker Precision Fluidics Applications Engineering for other considerations.
 93

LTC Series Miniature Diaphragm Pumps (liquid)

Sizing and Selection

LTC Series
Miniature Pumps

PMDC Iron Core Brush Brushless Slotted Motor Brushless Slotted

(High Torque) Motor

PMDC Iron Core Brush BLDC Slotted Motor Brushless Slotted (High torque) Motor
Efficiency1 Good Better High Efficiency at high loads
Life2 Good - 3,000 hrs Best - 10,000 hrs Best - 10,000 hrs
Cost Best Better Good

Barb Connection Compression Connection Threaded Connection

Fittings/ 6mm OD, 4mm ID (or 6mm OD, 4mm ID (or 1/4” OD) 1/4-28 UNF
Tubing 1/4” OD) Bottom sealing or face sealing
Nut, Ferrule, and Retaining ring
included

Mounting Guidelines: Port Connections:

• Bracket options available for mounting • Flow direction is marked on the pump
consideration (See EZ Mount catalog pages). head with arrows.
• Hole in the center of the bottom of housing • Barb ports are designed for 1/4” or 6MM
is for manufacturing only–not to be used OD tubing
for mounting. • Compression fittings are designed for
• Mounting holes are drilled for #6-20 self-tapping 4MM ID / 6MM OD tubing
screws with 1/4" (6 mm) thread engagement • Threaded ports are sized for 1/4”-28 UNF
torque to 4 in-lbs (0.45 N-m). male fittings.
 94

LTC Series Miniature Diaphragm Pumps (liquid)

Mechanical Integration
Dimensions

Miniature Pumps
Single head LTC PMDC Iron Core Brush
1.18 .40 .61
[30.0] [10.1] [15.5]

BARB FOR
1/8" I.D. TUBING
2.25
2.01 [57.2]
[51.1]
Ø 1.22
[31.1]

3.05 1.18
[77.5] [30.0]

NOT TO BE 2X Ø.125 [3.2]

USED FOR MOUNTING HOLES
MOUNTING
.75
[19.1]

UNITS
IN. [mm]

.45
[11.5]

"E" MOUNTING PATTERN SHOWN Head position 3 shown

(OTHER MOUNTING OPTIONS AVAILABLE)
(other head position options may be available)

Single head LTC Brushless Slotted Motor

1.18 .40 .61
[30.0] [10.1] [15.5]

BARB FOR
1/8" I.D. TUBING 2.25
2.01 [57.2]
[51.1]
Ø 1.30
[33.0]

2.16 1.18
[54.8] [30.0]

NOT TO BE 2X Ø.125 [3.2]

USED FOR MOUNTING HOLES
MOUNTING
.75
[19.1]

UNITS
IN. [mm]

.45
[11.5]

"E" MOUNTING PATTERN SHOWN Head position 3 shown, with ports away from motor
(OTHER MOUNTING OPTIONS AVAILABLE) (Other head position options may be available)
 95

LTC Series Miniature Diaphragm Pumps (liquid)

Mechanical Integration
Dimensions
Miniature Pumps

Dual head LTC-IIS Brushless Slotted (High Torque) Motor

.61
.40 [15.5]
[10.1]

BARB FOR
1/8" I.D. TUBING

.87 2.71 3.19

[22.1] [68.9] [81.1]

NOT TO BE
USED FOR
MOUNTING

2X Ø.125 [3.2]
MOUNTING HOLES .41
[10.4]
1.20 UNITS
3.35 [30.5] IN. [mm]
[85.1]

"G" MOUNTING PATTERN SHOWN

(OTHER MOUNTING OPTIONS AVAILABLE)

Head position 3 shown, with ports away from motor

(Other head position options may be available)

Electrical Integration and Motor Control

PMDC Iron Core Brush Motor
2 Wire Red (+), Black (-)
Wire specification 22AWG, Insulation OD 0.051 in (1.30 mm) 10” (254 mm) Wire Leads

Brushless Motor Control Options

2 Wire Red (+), Black (-)
Wire specification 22AWG, Insulation OD 0.051 in (1.30 mm) 20” (508 mm) Wire Leads

Other Motor Control Considerations

The drive electronics for the BLDC motors are integrated into the motor itself, all that is needed is a
power supply with the sufficient voltage and current.

Key Things to Remember

The pump is not a pressure holding device. An external check valve is recommended, if there is a
pressure holding requirement.

Pump orientation does not affect performance or life.

 96

LTC Series Miniature Diaphragm Pumps (liquid)

Typical Flow Diagram

LTC pump used for liquid transfer in a printing application

Miniature Pumps
LTC WASTE PUMP
LTC Waste Pump

LTC PUMP

USED LIQUID
EXTRACTION MANIFOLD WASTE
CONTAINER
2.5 GAL.
 97

LTC Series Miniature Diaphragm Pumps (liquid)

Accessory Information
EZ Mount available
Miniature Pumps

EZ Mount provides ease of installation and effective control of

vibration transfer. EZ Mount was designed to mount easily to the
Precision Fluidic LTC Family of diaphragm pumps.
Features
• Isolation feet on the EZ mount can be rotated in any one of three ninety-
degree planes and is designed for top-down or bottom-up mounting
providing simple installation.
• EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weights are: Style A - 0.63 oz (18 g), Style B - 0.71 oz (20 g).
• Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
• Designed to keep height and size to a minimum.
• Engineered for Parker LTC and LTC-IIS pumps to ease integration into your
system.

Physical Properties Dimensions

Operating Environment: Style A - Brushless Slotted Motor
41 - 158°F (5 - 70°C)
1.85
47.1
Humidity: 3 POSITIONS IN
90 DEGREE INCREMENTS

0 - 95% Relative Humidity

Base Plate:
Noryl GTX830 1.80 2.47 1.46 .78 2.13
45.6 62.8 37.1 19.9 54.2

Feet:
Silicone
Feet Insert:
Brass 1.18
30
.61
15.4
.84
21.4
1.52

Hardware: 38.5

UNITS
Zinc-Plated Steel IN. [mm]

EZ Mount kits include all necessary Style B - PMDC Iron Core Brush Motor
hardware and detailed instructions. 1.85
47.1
3 POSITIONS IN
90 DEGREE INCREMENTS
Isolation Feet are available in either
threaded or thru-hole clearance
for standard #4-40 or #6-32 (M3
for clearance hole only) hardware
and can be mounted in any of three
2.82 3.50 2.49 1.81 3.16
ninety-degree planes. 71.7 88.8 63.1 46 80.3

1.18 .51 .84

30 12.9 21.4
1.52
38.5

UNITS
IN. [mm]
 98

LTC Series Miniature Diaphragm Pumps (liquid)

Accessory Information
Style B - Brushless Slotted (High Torque) Motor
Dimensions

Miniature Pumps
1.85
47.1
3 POSITIONS IN
90 DEGREE INCREMENTS

2.82 3.50 2.49 1.81 3.16

71.7 88.8 63.1 46 80.3

1.18 .51 .84

30 12.9 21.4
1.52
38.5

UNITS
IN. [mm]

Ordering Information
EZ Mount for LTC Single Head Pump with EZ Mount for LTC Single Head Pump with
PMDC Iron Core Brush Motor Brushless Slotted Motor
Part Number Style Description Part Number Style Description
00329-10-A45S B #4-40 Threaded 00328-10-A45S A #4-40 Threaded
00329-10-B45S B #4 Clearance 00328-10-B45S A #4 Clearance
00329-10-D45S B #6-32 Threaded 00328-10-D45S A #6-32 Threaded
00329-10-C45S B #6 / M3 Clearance 00328-10-C45S A #6 / M3 Clearance

EZ Mount for LTC-IIS Dual Head Pump with

Brushless Slotted (High Torque) Motor
Part Number Style Description
00331-10-A45S B #4-40 Threaded
00331-10-B45S B #4 Clearance
00331-10-D45S B #6-32 Threaded
00331-10-C45S B #6 / M3 Clearance

LTC Compression Fitting Spares Kit

1. Black Knurled Nut - 20x
2. Metal Compression Sleeve - 20x
3. Plastic Compression Ferrule - 20x

Part Number Description Comments

01842-KT LTC Compression Fitting Spares Kit, 6MM Kit includes 20 pieces of each fitting component
 99

LTC Series Miniature Diaphragm Pumps (liquid)

Chemical Compatibility Chart*

Chemical Compatibility of Wetted Path Materials
Compatibility Legend
Miniature Pumps

Temperature Range 5-50 Degreees C

Vectra
Chemical FKM FFKM EPDM AEPDM PTFE
A130 1. EXCELLENT
DI Water 1 1 1 1 1 1 Minimal or no effect
Methanol 4 1 1 2 1 1
Isopropanol 1 1 1 1 1 1 2. GOOD
Ethanol 3 1 1 2 1 1 Possible swelling and/or
Acetonitrile 4 1 1 1 1 1 loss of physical properties
Organic Acids - Dilute 1 1 1 1 1 3
Non-Organic Acids - Dilute 1 1 1 1 1 3 3. DOUBTFUL
Bases - Dilute 1 1 1 1 1 3 Moderate or severe swell-
Saline 1 1 1 1 1 1 ing and loss of physical
Bleach 12% 1 1 1 1 1 3 properties
Ink (MEK) 4 1 1 2 1 1
Sodium Hydroxide 20% 2 1 1 2 1 3 4. NOT RECOMMENDED
Severe effect and should
not be considered
*The above is an Abbreviated Chemical Compatibility Chart. Please
consult factory for details. Temperature range for chart is 5-50° C. Note: Consult factory for
See Application Engineering for compatibility’s with any specific acids other gases.
or bases.

Ordering Information
Part Liquid Flow (Water) Dry Max Pressure Wetted
Configuration Voltage Connection FF
Number mLPM @ Load Vacuum (Water) Materials

0 5 10 15 20 25 30
psig psig psig psig psig psig psig
inHg PSIg Diaphram Valves Gasket
0 345 689 1034 1379 1724 2068
mbar mbar mbar mbar mbar mbar mbar

Brush Motor 12 Barb W311-61 930 865 820 775 705 630 580 17.0 30.0 EPDM AEPDM EPDM
12 Compression W311-51 965 930 890 830 750 655 605 17.0 30.0 EPDM AEPDM EPDM
12 1/4-28 Thread W311-11 670 650 600 550 505 450 390 14.5 30.0 EPDM AEPDM EPDM
24 Barb W309-61 970 890 830 800 730 640 580 17.0 30.0 EPDM AEPDM EPDM
24 Compression W309-51 930 895 830 780 755 720 690 17.0 30.0 EPDM AEPDM EPDM
24 1/4-28 Thread W309-11 720 715 685 660 645 585 540 14.5 30.0 EPDM AEPDM EPDM

Compact Brushless DC 12 Barb W313-61 880 805 780 720 645 585 525 17.0 30.0 EPDM AEPDM EPDM
12 Compression W313-51 945 900 840 770 665 590 535 17.0 30.0 EPDM AEPDM EPDM
12 1/4-28 Thread W313-11 640 620 580 510 460 410 370 14.5 30.0 EPDM AEPDM EPDM
24 Barb W312-61 1000 950 875 800 730 655 580 17.0 30.0 EPDM AEPDM EPDM
24 Compression W312-51 1030 1000 930 860 790 690 605 16.0 30.0 EPDM AEPDM EPDM
24 1/4-28 Thread W312-11 640 630 570 510 455 415 375 14.5 30.0 EPDM AEPDM EPDM

High Torque Brushless DC 12 1/4-28 Thread V015-11 1500 1400 1300 1200 1100 1000 900 11.5 30.0 EPDM AEPDM EPDM
24 Barb V016-61 1640 1535 1400 1270 1150 1045 925 10.0 >60 EPDM AEPDM EPDM
24 Compression V016-51 1650 1540 1405 1265 1135 1020 895 11.0 >60 EPDM AEPDM EPDM
24 1/4-28 Thread V016-11 1500 1400 1300 1200 1100 1000 900 11.5 30.0 EPDM AEPDM EPDM

Note: The Ordering Information Section includes a few selected part numbers for the product line.
Other performances and configurations are available. Please contact your Sales Representative or an
Application Engineer to discuss your application needs.
 100

LTC Series Miniature Diaphragm Pumps (liquid)

To order on-line go to www.parker.com/precisionfluidics/ltc to configure your LTC Miniature Diaphragm Pump.

Miniature Pumps
Serviceable – PPF products are designed for use through the rated life and Parker does not sell replacement parts,
and these products are not meant to be serviced in the field. Please contact Customer Service with any questions.

Note: In addition to Parker’s innovative and flexible pump designs, we offer applications engineering expertise
to our customers in order to configure and recommend the optimal pump for the application. Contact Parker
Applications Engineering to discuss and configure alternate pump configurations to meet your specific application
requirements. Providing information on the following requirements will assist us in developing an optimal solution
for your application:

• Noise • Size
• Operating Pressure / Vacuum • Motor Control
• Power Consumption • Media
• Life Requirement • Voltage
• Description of pump function
in the application

Parker Hannifin Precision Fluidics Division reserves the right to make changes. Drawings are for reference only.

Appendix A
All performance data is typical based on standard conditions: 70°F and 14.7 psia (21°C and 1 bar).
1. Duty Dependent. For operation above 122°F (50°C) consult factory
2. Life rating can vary depending on application and operating conditions.
3. Custom motor options available. Custom motors may require a significant application potential. The standard
motors can be configured with a special winding to meet a particular operation point at a specified voltage
4. Current range is dependent on motor type, voltage, pressure/vacuum and flow requirement. Lower levels
possible depending on application.
5. Pump efficiency is a measure of the flow rate generated per unit of power consumed. Efficiency may change
dependent on application and operating condition at free flow.
101

EZ-Mount
For BTC/TTC/LTC Series Pumps
Vibration Isolation Mounting System

EZ Mount provides ease of installation and effective control of

vibration transfer. EZ Mount was designed to mount easily to all
Miniature Pumps

Precision Fluidic BTC, TTC and LTC Family of diaphragm pumps.

Features
• Isolation feet on the EZ mount can be rotated in any one of three ninety-
degree planes and is designed for top-down or bottom-up mounting
providing simple installation.
• EZ Mount was designed to minimize weight added to the pump assembly.
Approximate weights are: Style A - 0.63 oz (18 g), Style B - 0.71 oz (20 g).
• Effectively absorbs vibration to minimize most vibration-induced noise and
vibration transfer into an instrument.
• Designed to keep height and size to a minimum.
• Engineered for Parker BTC, TTC and LTC pumps to ease integration into
your system.

Pictured EZ Mounts shown fully

assembled with baseplate and
isolation feet.

Physical Properties
Operating Environment: 41 - 158°F (5 - 70°C)
Humidity: 0 - 95% Relative Humidity
Base Plate: Noryl GTX830
Feet: Silicone
Feet Insert: Brass
Hardware: Zinc-Plated Steel

Product Assemblies
BTC/LTC/TTC BTC IIS/LTC IIS BTC IIS /TTC IIS

PMDC Iron Core Brush Motor Brushless Slotted (High Torque) Motor Brushless DC Motor

EZ Mount kits include all necessary hardware and detailed instructions.

Isolation Feet are available in either threaded or thru-hole clearance for standard #4-40 or #6-32 (M3 for
clearance hole only) hardware and can be mounted in any of three ninety-degree planes.
 102

EZ-Mount Vibration Isolation Mounting System

Product Specifications
BTC/LTC/TTC Single Head Pump BTC/LTC/TTC Single Head Pump
with PMDC Iron Core Brush Motor with Brushless Slotless Motor

Miniature Pumps
Part Number Style Description
Part Number Style Description
01074-10-A45S B #4-40 Threaded
00329-10-A45S B #4-40 Threaded
01074-10-B45S B #4 Clearance
00329-10-B45S B #4 Clearance
01074-10-D45S B #6-32 Threaded
00329-10-D45S B #6-32 Threaded
01074-10-C45S B #6 / M3 Clearance
00329-10-C45S B #6 / M3 Clearance

BTC /LTC/TTC Single Head Pump and BTCIIS/TTC IIS BTC-IIS/LTC-IIS Dual Head Pump
Dual Head Pump with Brushless Slotted Motor with Brushless Slotted Motor (High Torque)
Part Number Style Description Part Number Style Description
00328-10-A45S A #4-40 Threaded 00331-10-A45S B #4-40 Threaded
00328-10-B45S A #4 Clearance 00331-10-B45S B #4 Clearance
00328-10-D45S A #6-32 Threaded 00331-10-D45S B #6-32 Threaded
00328-10-C45S A #6 / M3 Clearance 00331-10-C45S B #6 / M3 Clearance

BTC-IIS/TTC-IIS Dual Head Pump

with PMDC Iron Core Brush Motor
Part Number Style Description
00332-10-A45S B #4-40 Threaded
00332-10-B45S B #4 Clearance
00332-10-D45S B #6-32 Threaded
00332-10-C45S B #6 / M3 Clearance

Dimensions
1.85
1.85 47.1
47.1 3 POSITIONS IN
3 POSITIONS IN 90 DEGREE INCREMENTS
90 DEGREE INCREMENTS

1.80 2.47 1.46 .78 2.13

2.82 3.50 2.49 1.81 3.16
45.6 62.8 37.1 19.9 54.2 71.7 88.8 63.1 46 80.3

1.18 .61 .84

30 15.4 21.4
1.52 1.18 .51 .84
38.5 30 12.9 21.4
1.52
38.5

Style A UNITS
IN. [mm] Style B UNITS
IN. [mm]

Ordering Information
Please click on the Order On-line button
(or go to www.parker.com/precisionfluidics/ezmount) to select
your EZ Mount Accessory.
103
Miniature Pumps

W A R N IN G

F A I L U RE O R I MP R OP E R SE L E C T I O N O R I MP R O P E R U SE O F T HE P R O D U C T S A N D / OR
S Y S TE MS D E S C RI B E D H E RE I N O R RE L A TE D I T E M S CA N C A U SE D E A T H , P E R S ON A L I N J U RY , A N D
P R OP E R TY D A M A G E .

T h i s d o cu m e n t a n d o t h er i n f o r m a t i o n f r o m P a r k er H a n n i f i n C o r p o r a t i o n , i t s su b s i di a r i e s a n d a u t h o r i z e d
d i s t r i b u t o r s p r o v i d e p r o d u ct a n d/ o r s y st em o pt i o n s f o r f u r t h er i n v e st i g a t i o n b y u s e r s h a v i n g t e c hn i c a l e x p er t i s e. I t i s
i m p o r t a n t t h a t y o u a n a l y z e a l l a s p e ct s o f y o u r a p p l i c a t i o n a n d r e v i e w t h e i n f o r m a t i o n co n c e r n i n g t h e pr o d u ct o r
s y s t em s i n t h e cu r r en t pr o du c t ca t a l o g . D u e t o t h e v a r i et y o f o p er a t i n g c o n di t i o n s a n d a p p l i c a t i o n s f o r t h e s e pr o du c t s o r
s y s t em s , t h e u s e r , t hr o u g h i t s o w n a n a l y s i s a n d t e st i n g , i s s o l e l y r e s p o n si b l e f o r m a k i n g t h e f i n a l s e l e c t i o n o f t h e
p r o d u ct s a n d s y st em s a s s u r i n g t ha t a l l p e r f o r m a n c e , sa f e t y a n d w a r n i n g r e qu i r e m en t s o f t h e a p p l i ca t i o n a r e m et .

T h e p r o d u ct s d e s cr i b e d h er e i n , i n c l u d i n g w i t h o u t l i m i t a t i o n , p r o du ct f ea t u r e s , s p e c i f i c a t i o n s , d e si g n s , a v a i l a b i l i t y
a n d p r i c i n g , a r e su b j e ct t o c ha n g e b y P a r k er H a n n i f i n C o r p o r a t i o n a n d i t s su b s i di a r i e s a t a n y t i m e w i t h o u t n o t i c e.
 104

Miniature Pumps

© 2020 Parker Hannifin Corporation PPF MDP - 002/US July 2020

Parker Hannifin Corporation

Precision Fluidics Division
26 Clinton Dr., Unit 103
Hollis, NH 03049
phone: +1 603 595 1500
email: ppfinfo@parker.com
www.parker.com/precisionfluidics