Material Safety Data Sheet
G2200 SILICONE SEALANT
`
Last Revision Date : 17.08.2017 Page No. : Page 1 of 5
Revision No. : 03
1. PRODUCT AND COMPANY IDENTIFICATION
Product Details
Product Name : G2200 Silicone Sealant
Product Code : AMI 150 GP
Recommended Use : General Purpose Silicone Sealant
Company Details
Company Name : Al Muqarram Insulation Materials Industry L.L.C.
Address : 15th Industrial Area,
Post Box No. 24756
Sharjah, United Arab Emirates
Phone Number : +971 (6) 5353796
Fax No. : +971 (6) 5353964
E-mail ID : info@muqarram.com, sales@muqarram.com
2. HAZARDS IDENTIFICATION
Emergency Overview : May cause skin, eye, and respiratory tract irritation.
Hazard Classification : Non-hazardous substance or mixture. Non-dangerous goods.
Hazard Statement : Overexposure by inhalation may be harmful.
Safety Phrase(s) : Use only in well-ventilated areas.
Precautionary Statements:
Prevention : Avoid contact with skin and eyes. Avoid breathing vapors.
Use personal protective equipment as required.
Response : IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF ON SKIN: Wash with plenty of soap and water.
If eye irritation persists, seek medical attention.
Disposal : Dispose contents/container to an appropriate treatment and
disposal facility in accordance with applicable laws and regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
General chemical description:
Moisture-curing acetoxy silicone sealant
CAS No. %W CHEMICAL NAME
4253-34-3 1–5 Methytriacetoxysilane
17865-07-5 1–5 Propyltriacetoxysilane
70131-67-8 40 – 60 Polydimethylsiloxane, hydroxy terminated
112945-52-5 5 – 15 Silicone dioxide, amorphous
64742-46-7 5 – 25 Distillates (petroleum), Hydrotreated middle
Al Muqarram Insulation Materials Industry, L.L.C. www.muqarram.com
Made in United Arab Emirates
Material Safety Data Sheet
G2200 SILICONE SEALANT
`
Last Revision Date : 17.08.2017 Page No. : Page 2 of 5
Revision No. : 03
4. FIRST AID MEASURES
Inhalation : Move the victim to fresh air. Get medical attention if any discomfort continues.
Skin Contact : Wash skin thoroughly with soap and water. Get medical advice/attention if skin
irritation persists.
Eye Contact : Wash immediately with plenty of running water. Get medical advice/attention if
eye irritation persists.
Ingestion : Do not induce vomiting. Rinse mouth. Give the victim 1-2 glasses of water.
Get immediate medical attention.
Note to Physician : Treatment is symptomatic.
5. FIRE FIGHTING MEASURES
General Fire Hazards : This product is not flammable. No unusual fire hazards noted.
Suitable Extinguishing Media : CO2 foam and dry chemical powder. Use suitable fire extinguishing
media for surrounding materials.
Unsuitable Extinguishing Media : Do not use water jet as an extinguisher.
Specific Hazards Arising from : During fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides
the Mixture (NOx) can be released.
Fire Fighting Procedures : Self-contained breathing apparatus should be worn with full face mask and
protective clothing.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective : Avoid contact with skin and eyes. Ensure adequate ventilation.
equipment and emergency
procedures
Environmental Precautions : Do not let product to enter water sources, sewers and drains. Notify authorities
in the event of major spillages in accordance to local regulations.
Containment and Clean Up : Wipe, scrape or absorb the spillage with suitable inert material. Avoid contact with
Procedures skin or inhalation of spillage or vapor. Remove to safe space as spillage of uncured
product may cause slippery surface. Wash the floor with plenty of water. Do not
empty into drains. Transfer to a closed container for disposal. Wear protective
equipment as specified in Section 8.
Prevention of Second Disaster : Absorbed waste maybe disposed as per local government regulations.
7. HANDLING AND STORAGE
Precautions for Safe Handling : Use only with adequate ventilation. Product releases acetic acid during
application and curing. Avoid skin and eye contact. Remove contact lenses
before applying sealant. Do not handle lenses until fingers and hands are
completely free from sealant. Keep containers/cartridges tightly closed when
not in use. Keep out of reach of children. See Section 8 for Personal Protective
Equipment.
Proper Storage Condition : Store the materials in tightly closed in the original packaging and stored in a dry,
well-ventilated area at a stable room temperature of 25°C. Keep away from
exposure to direct sunlight, dust, moisture, corrosive and solvent fumes and
Al Muqarram Insulation Materials Industry, L.L.C. www.muqarram.com
Made in United Arab Emirates
Material Safety Data Sheet
G2200 SILICONE SEALANT
`
Last Revision Date : 17.08.2017 Page No. : Page 3 of 5
Revision No. : 03
vapors.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredient Comments : Acetic acid is evolved upon contact with water or humid air.
Provide ventilation to control exposures.
Engineering Controls : Proper ventilation is recommended for controlling exposures.
Local exhaust is preferred.
Respiratory Protection : Use appropriate respirator unless local exhaust ventilation is sufficient.
Hand Protection : Wear impermeable chemical protective gloves while handling this material.
Eye Protection : If risk of splashing, wear safety goggles with side shields.
Other Protective Equipment : Wear suitable protective clothing such as aprons against splashing and
contamination.
Work/Hygienic Practices : When using, do not eat, drink or smoke. Wash at the end of each work shift and
before eating. Wash hands thoroughly after handling. Contaminated shoes and
clothing should be removed after handling and washed thoroughly before reuse.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form : Non-sag paste
Color : Clear, White, Black. RAL Colors available upon request
Properties
Odor : Acetic acid odor
pH : Not determined
Specific Gravity @ 25ºC : 0.94 + 0.02
Boiling Point (ºC) : Not determined
Melting Point : Not determined
Flash Point : Not determined
Solubility in Water @ 25ºC : Insoluble
Shelf Life : 12 months at ambient temperature
10. STABILITY AND REACTIVITY
Stability : Stable under normal temperature conditions.
Reactivity : Polymerizes in the presence of water or moisture.
Prohibited Condition : Avoid excessive heat for prolonged periods of time or contamination.
Incompatible Materials : Can react with strong oxidizing agents (e.g. nitric acid, peroxides
and chromates). Alcohols. Alkalis. Strong acids.
Hazardous Thermal : Thermal decomposition of this product during fire or extremely high temperature
Decomposition Product may liberate carbon dioxides and other toxic gases or vapors.
Hazardous Polymerization : Unknown.
Al Muqarram Insulation Materials Industry, L.L.C. www.muqarram.com
Made in United Arab Emirates
Material Safety Data Sheet
G2200 SILICONE SEALANT
`
Last Revision Date : 17.08.2017 Page No. : Page 4 of 5
Revision No. : 03
11. TOXICOLOGICAL INFORMATION
Possible Health Effects
Acute
Skin : May cause mild irritation.
Eye : Direct contact may cause mild irritation.
Inhalation : May cause mild irritation to respiratory passages.
Ingestion : Not an anticipated route of exposure at normal use.
Chronic
Skin : No data available.
Eye : No data available.
Inhalation : No data available.
Ingestion : No data available.
12. ECOLOGICAL INFORMATION
Mobility : Cured material are not mobile
Bioaccumulative Property : Does not bioaccumulate.
Ecotoxicity : No adverse effects on aquatic organisms are predicted. Do not empty into drains
and water sources.
Biodegradability : Non-biodegradable.
13. DISPOSAL CONSIDERATIONS
Product Disposal : Dispose waste at an appropriate treatment and disposal facility in accordance to
local and national regulations.
Disposal of Uncleaned Packages : After use, tubes and bottles containing residue of product should be disposed of
as chemically contaminated waste according to local and national regulations.
14. TRANSPORT INFORMATION
UN Number : Not applicable.
IATA Classification : Not regulated.
IMDG Classification : Not regulated.
Special Precautions Re Carriage : None.
Packing Group : Not applicable.
Class : Not applicable.
Proper Shipping Name : Not applicable.
15. REGULATORY INFORMATION
Risk Phrases : Not Classified
Safety Phrases : Wear suitable protective clothing, gloves and eye/face protection.
Chemical Safety Assessment : A chemical safety assessment has not been carried out.
Al Muqarram Insulation Materials Industry, L.L.C. www.muqarram.com
Made in United Arab Emirates
Material Safety Data Sheet
G2200 SILICONE SEALANT
`
Last Revision Date : 17.08.2017 Page No. : Page 5 of 5
Revision No. : 03
16. OTHER INFORMATION
General Information
This product should be used as directed. For further information, please consult product data sheets and application
information bulletin for this product.
Further Information
The information contained herein is based on the present state of our knowledge. It characterizes the product with regard
to the appropriate health and safety precaution, and hazard information. It does not represent a guarantee of the properties
of product.
Revision Comments
This safety data sheet supersedes all previous issues and users are cautioned to ensure that it is correct.
Al Muqarram Insulation Materials Industry, L.L.C. www.muqarram.com
Made in United Arab Emirates
