24 CARAT THE FUTURE OF DENTISTRY
DenPro®
Advanced Zero Sensitivity Tooth Whitening System
Product Description :
24 Carat Pure White Smile is a revolutionary, state-of-art Teeth Whitening Gel. Its
advanced zero sensitivity formula eliminates sensitivity. The optimized pH gel
consists of the active carbamide peroxide suspended in a high tack, high viscosity
gel which considerably reduces the treatment time.
Composition :
Carbamide Peroxide, EDTA, Citric Acid, Propylene Glycol, Carbopol, Glycerine.
Potassium Nitrate and Spearmint Oil.
Instructions for use :
Remove cap from the syringe and fix dispensing tip. Squeeze whitening gel into
the tray in small drops at each tooth site. Do not overfill the tray. Brush and floss
teeth thoroughly and seat the tray firmly into teeth. Wipe over flowing excess gel off
the gums with a cotton swab or tissue by holding the tray with one hand. Rinse with
cold water. Do not swallow rinses. Wear tray for 30 minutes. You may wear for
longer period for further results. Remove tray and brush teeth to remove gel. Clean
tray with soft brush or with cotton swab and rinse with cold water. Wipe the tray with
dry tissue and store in zipper pouch/plastic box. Repeat the process for both upper
and lower teeth once a day until teeth have reached desired shade of whiteness.
Maximum of twelve applications recommended.
Warning :
For professional use only .
Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and
eyes. Avoid prolonged inhalation. Do not take internally Contact with the skin may
cause irritation, burns of hypersensitivity. If contact with skin occurs immediately
wipe off thoroughly with cotton and alcohol and then wash well with soap and
water. If skin rash and sensitization or other allergic reaction occurs discontinue
use and seek medical attention. If the product comes into contact with the eyes,
rinse thoroughly with fresh water and consult a physician. It should not be used
with patients who have a history of severe allergic reaction to any of the
components.
Cautions :
Only natural teeth can be bleached. Pregnant and lactating women are advised to
avoid whitening treatment. Check patient's history for allergies to carbamide
peroxide/hydrogen peroxide and other ingredients. If you experience any
problem, consult your dentist.
Storage Conditions :
Store at temperature between 10°C to 24°C. Close the cap carefully after use.
Keep away from moisture. Shelf life not affected after opening if stored in a cool dry
place.
Shelf Life :
3Years from the date of manufacturing .
Presentation :
Ref : 90003
Intro Pack : 1 x 5ml Syringe, 16%+ 1 x Dispensing Tips
Ref : 90006
Economy Pack : 4 x 1.5ml Syringes, 16% + 4 x Dispensing Tips
Ref : 90004
Intro Pack : 1 x 5ml Syringe, 22%+ 1 x Dispensing Tips
Ref : 90007
Economy Pack : 4 x 1.5ml Syringes, 22% + 4 x Dispensing Tips
Ref : 90005
Intro Pack : 1 x 5ml Syringe, 35%+ 1 x Dispensing Tips
Ref : 90008
Economy Pack : 4 x 1.5ml Syringes, 35% + 4 x Dispensing Tips
Disposal conditions :
To be disposed off based on the prevailing rules of the country in which it is used.
Prevest DenPro Limited
Unit ll, EPIP, Bari Brahmana,
Jammu-181133, India. Revision : 05
www.prevestdenpro.com Date : 23-05-2019
Customer Care No. :1800-180-7172
Email : customercare@prevestdenpro.com
LOT Symbol for “BA
TCH CODE” Symbol for “USE BY” NON
STERILE Symbol for “NON STERILE” Symbol for “KEEPDRY”
Symbol for “CAUTION” i Symbol for “CONSUL
T INSTRUCTION FOR USE” REF Symbol for “CA
TALOGUE NUMBER”
EC REP SYMBOL FOR EUROPEAN COMMUNITYAUTHORIZED REPRESENTATIVE Symbol for “DO NOT
USE IF PACKAGE IS DAMAGE”
Symbol for “KEEPOUT OF THE REACH OF CHILDREN” Symbol for “MANUF
ACTURER NAME &ADDRESS”
75° F
24° C
50° F
10° C
Symbol for “TEMPERA
TURE LIMITATION” Symbol for “KEEPAWAY FROM SUNLIGHT”
The material has been developed solely for professional dental use. Application should be carried out strictly according
to the instruction for use. Liability cannot be accepted for damages resulting from failure to observe the instructions of the
stipulated area of applications. The user is responsible for testing the material for its suitability and use for any purpose
not explicitly stated in this instruction sheet. Description and data constitute no warranty of attributes and are not binding.
