PRODUCT OVERVIEW

THE SLIDING GATE SEAT: A BETTER DESIGN

SIMPLE CONCEPT, SUPERIOR PERFORMANCE

You will notice something different in a Jordan valve . . . the sliding gate seat.
A remarkably simple concept that offers superior performance and benefits
not found in traditional rising stem and rotary valves.

The sliding gate seat is made up of two primary parts: a movable disc and
stationary plate with multiple orifices. Together, this seat set achieves levels of
performance, reliability and accuracy that are hard to find in other valve designs.

ADVANTAGES

Quiet Operation

Compared to conventional globe and cage designs, the sliding

gate seat generates between 5-10dB less noise. You won't find a
premium price adder for "low-noise trim!" The sliding gate valve
is inherently quieter than other types of valves because:

•• The disc and plate remain in constant contact, eliminating the

chatter found in globe-style designs

• The straight-through flow passage minimizes turbulence "Massive" globe or

cage style valve
found in globe and rotary designs, a prime cause of valve noise

• The multiple orifices in the plate and disc divide the flow into
smaller flow streams resulting in less noise.

Size and Weight

Smaller, lighter
sliding gate
As the line size increases, so too does the size and weight of the wafer-design
control valve
valve. Because of the short stroke length, a sliding gate valve is
typically smaller and lighter weight than a globe/cage style valve.

For the Mark 75 Series control valve, the shipping size, weight,
packing waste and costs decrease dramatically due to the wafer
style design.
 Pg. 3

Reduced Turbulence

When throttling, the control member of a rotary control valve

will direct the flow to the sealing area of the seat, causing
premature seat leakage.

The tortuous flow path of a globe style design creates

greater turbulence, noise and wear - reducing seat life and
compromising control. In flashing or cavitating service, damage
to the valve body is common, mitigated only through expensive
material upgrades or elaborate trim configurations.

The multi-orifice straight through flow path of the sliding gate

reduces turbulence and leads to quieter operation, reduced Competitor Valve
wear, longer seat life and better control. The tortuous flow of a traditional globe style valve.

For example, when combined with the ultra-compact wafer

body design of the Mark 75 Series, erosion of the seats and
valve body is virtually eliminated. Dramatic cost savings can be
realized.

Straight-Through Flow

The seat set is perpendicular to the flow, unlike the

traditional globe style design. With straight through flow,
the turbulence is reduced and superior trim life is achieved.

The sliding gate design provides exceptional low flow control

since the flow works with the seat and not against it. In a typical
globe style design, the flow goes underneath the plug, working
against the plug. With the sliding gate, the flow pushes the disc
against the plate, helping to hold the desired setpoint. This also
enables the disc and plate to lap and clean themselves as the
valve modulates. The sliding gate design "wears in" instead of
Jordan Valve
wearing out! The straight-through flow of the sliding gate

Short Stroke, Fast Response

The total stroke length is just a fraction of the equivalent globe In control valves, the sliding gate allows the use of reduced air
valve. In pressure regulators, the stroke length is typically 1/3 consumption and weight minimization. The short stroke reduces
that of a globe valve, reducing the amount of droop (deviation packing wear and lengthens the diaphragm life.
from setpoint) in the regulator.
 THE SLIDING GATE SEAT: A BETTER DESIGN

Seat Coatings Tight Shutoff

Jordan Valve offers coatings and seat materials to meet almost The sliding gate design provides an area of closure, not a line
any application need. Jorcote, our standard seat material, is a of closure. When the valve is closed, the disc and plate are
proprietary composite coating on Stainless Steel. This material overlapped by 1/32". This area of closure helps reduce the
is extremely hard and delivers outstanding performance. Other effects of wire draw which is one of the most common causes of
coatings include Teflon and chrome plating. seat leakage. What does this mean for you? Less maintenance,
downtime and more opportunity to increase yields and profits.

Easy to Maintain

The simple design of the sliding gate valve makes

maintenance easy to perform. Disassembly of the valve is very
simple, and since the seats are not pressed or screwed into the
valve body, they conveniently lift out. Should your flow re-
quirements change, interchangeable Cv's (Kv's) are available in
coefficients as low as 0.0008 (0,0007) and as high as 600 (519)
(depending on body size).

Durability

• Self-Cleaning: the movement of the sliding gate seats • Engineer tested: Jordan Valve engineers conducted a steam
generates a self-cleaning action, with any leak-producing test using 250 psig (17,2 barg) saturated steam. The test was
deposits being cleaned off by the sharp shearing action of designed so that the valve would fully stroke open and closed
the disc moving across the plate. each time it was actuated. The pressure drop across the valve

• Materials: our proprietary Jorcote seat material is extremely was the full 250 psig (17,23 barg). The results were impressive.
hard (@RC85) and delivers outstanding wear resistance. Our standard Jorcote/Chrome seat combination had less

• Multi-orifice: The multi-orifice design separates erosive flow friction after 70,000 cycles than when it was new and the
into smaller, less damaging streams. The erosive forces are seat leakage was well below ANSI Class IV limits. Jordan Valve
dissipated over the numerous slots eliminating the single wear engineers are constantly testing and improving our products
points associated with other valve types and quieter operation. to ensure optimal high performance in the field.

• Eliminates Damaging Chatter: The upstream pressure holds

the disc in constant contact with the plate. This prevents the
sudden, damaging (and noisy) contact which occurs in some
globe designs. The constant contact between the disc and
plate actually generate a self-lapping effect which results in
less friction and tighter shutoff than when the valve leaves
the factory.
 Pg. 5

JORLON DIAPHRAGM
The Jorlon diaphragm extends the life of your regulators and reduces the overall cost of ownership. This diaphragm was developed as
an alternative to the standard SST diaphragm.

Jorlon is a proprietary modified PTFE material that positively impacts regulator reliability, performance and service life. It is the standard
and preferred diaphragm in most regulator applications and provides many benefits.

• Chemical Compatibility: since Jorlon is PTFE based, it is • Long Life: Jorlon has been extensively tested for durability.
compatible with the same media as TeflonTM The diaphragm was tested on both 300 psi (20,6 bar) air

• Temperature Range: Jorlon can operate up to up to 450°F and 450°F (232°C) steam with no failures. Jorlon has
(232°C) and down as low as -40°F (-40°C) been cycle-tested over 1,000,000 full stroke cycles with

• High Pressure Limits: Jorlon has been tested in excess no failures

of our regulators maximum allowable pressures. In some • Lower Ownership Costs: less droop means better
cases, Jorlon can be rated as high as 700 psi at 100°F accuracy, and better accuracy means better overall
(48,3 bar at 38°C) performance and productivity. Its long life means less down

• Improved Performance: SST diaphragms, by nature, are time to replace a failed diaphragm which translates into
rigid and have decreased sensitivity. Jorlon approaches higher profits
the droop/offset performance seen in true elastomer
diaphragms resulting in greater set point accuracy as flow
rates change

DISC AND PLATE

OPEN CLOSED

The disc and plate are shown in the full open position. The disc and plate are shown in the full closed
Note, the straight-through flow. This minimizes flow position. The 1/32" overlap assures tight shut-off.
turbulence, a major cause of poor control, noise and wear The overlap also provides a buffer of extra metal to
in other valve designs. defeat any fringe erosion of wire drawing.
ABOUT JORDAN VALVE

For more than six decades, companies • Customer-centric: Through our unmatched

around the globe have relied on Jordan combination of products, engineering, and after-market

Valve for their most demanding services, we help our customers achieve tangible

applications. What makes Jordan results: lower operating costs, optimized performance,

Valve different? prolonged equipment life, mitigated risks and

higher productivity.

• Innovation: We have talented people working on

• Commitment: No one wants unscheduled downtime or
teams to design innovative new products and
product failure. At Jordan Valve, we have an unwavering
further develop our existing product portfolio to
commitment to standards and processes that ensure
serve our customers.
innovative and reliable product designs.

• A trusted partner: We help our customers improve

• People: A global network of representatives and
their operational efficiency, reduce risks and
distributors stand ready to assist you. Visit us at
increase profitability. Our engineering and sales
jordanvalve.com or call +1.513.533.5600.
teams offer solutions and products you can trust.

“
Jordan valves are extremely reliable requiring very little
maintenance and rarely need replacement. We have
temperature regulators that have been in service for thirty
plus years and probably some longer than that!
- Jordan Valve Customer

JVCV Max Sizing Software Quick Ship Program

Take the worry out of valve specification. The JVCV Max Our Jordan Valve Express Program offers you options
Sizing Software is available on the Jordan Valve website. to get the products you need, when you need them.
By entering just a few parameters, you have the ability Many products are available for next business day
to calculate the required Cv (Kv) for your application. shipment. Go to our website for the full list of valves
Download, print or share the results with anyone. available for quick shipment.

Specials Rigorous Testing

A wide range of body materials, Cvs (Kvs), and pressure Every Jordan regulator, temperature regulator and
range options are available to meet the different service control valve manufactured in our Cincinnati, Ohio
conditions in which our valves may be required to facility is thoroughly tested before shipment.
operate. All options are not shown in the Product
Guide. For special materials, contact you local Jordan
Valve representative.
 Pg. 7

CONTENTS

1
SLIDING GATE REGULATORS

Pressure and back pressure regulators including, self-operated, super high flow,

high sensitivity, differential, dome loaded, vacuum, pilot-operated, wafer style

2 TEMPERATURE REGULATORS

Self-operated, high flow, controlled-failure option, ambient temperature,

externally piloted and three way mixing/diverting temperature regulators

3 TANK BLANKETING & GAS VALVES

Low pressure, balanced plug, double seated, piloted, internally piloted,

high inlet pressure and critical pressure

4 GLOBE-STYLE REGULATING VALVES

Globe valves, air-loaded globe valves, dual inlet and outlet, piloted and liquid

pressure regulating valves

5 SLIDING GATE CONTROL VALVES

Wafer style, diaphragm, high flow/high Cv's (Kv's), motor operated, final

control element, bellows seal, globe style and three way control valves

6 GLOBE-STYLE CONTROL VALVES

Globe style control valves with single port, quick change, internal flow

cavities, along with angle style, rotary and on/off control valves
1
SLIDING GATE
REGULATORS
The sliding gate pressure and back pressure concept - it is made up of two primary parts: a

regulators are ideal for steam, liquid, and gas movable disc and stationary plate with

media. A variety of regulators are available multiple orifices. Together, this seat set

including self-operated, high flow, differential, achieves levels of performance, reliability

vacuum, air loaded and pilot operated. and accuracy that are superior to other valve

The sliding gate seat is a remarkably simple designs.

 Pg. 9

Optimized spring ranges for increased accuracy

Jorlon diaphragm - excellent for high cycling, chemical

resistance, and steam service. Optional metal
diaphragm for higher temperature applications

Stainless steel internals extend seat and trim life

A range of easily exchanged Cvs (Kvs) are available depending on size

Proprietary Jorcote coating delivers very low friction with

outstanding wear resistance and a temperature rating of up
to 550°F (288°C)

Sliding gate seats provide

• Straight-through flow for reduced turbulence and quiet operation
• Short stroke for fast response and accurate control
• Easily interchangeable Cv's (Kv's)
• Tight shutoff due to overlap of seat closure area
1 SLIDING GATE PRESSURE REGULATORS

MK60 Self-Operated, Jorlon Diaphragm

The Mark 60 Series handles a broad range of applications including steam,

water, oil, gas, air and chemicals. It is a self-operating pressure regulator
used to regulate the downstream pressure to a predetermined setpoint.
The sliding gate seats offer excellent control and extreme longevity in a
compact, lightweight design.

Sizes 1/4" - 4" (DN8 - DN100)

Cv (Kv) up to 200 (up to 172)

Diaphragm Jorlon, Stainless Steel, Hastelloy C, Alloy 20

MK60: 1 to 220 psi (0,07 to 15,2 bar);

Setpoint
MK60HP: 75 to 450 psi (5,2 to 31 bar)

Ductile Iron, Bronze, Carbon Steel, Stainless Steel,

Body Material
Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK601/602 Self-Operated, High Flow

The Mark 601 and Mark 602 Series are used in applications that require a
higher Cv (Kv) rating without using a larger valve. The high flow Mark 601
has Cv's (Kv's) as high as 50 (43) and the super high flow Mark 602 has Cv's
(Kv's) up to 70 (60). The sliding gate seats help reduce the droop commonly
associated with high flow regulators.

Sizes 1-1/2" - 2" (DN40 - DN50)

Cv (Kv) up to 70 (up to 60)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Setpoint 20 to 160 psi (1,4 to 11,0 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

Threaded, ANSI Flanges (150#, 300#), DIN Flanges

End Connection
(PN 10/16, PN25/40)
 Pg. 11

MK61 High Sensitivity

The Mark 61 Series handles a broad range of applications including steam,

water, oil, gas, air and chemicals. It is a self-operating pressure regulator
used to regulate the downstream pressure to a predetermined setpoint.
The sliding gate seats offer excellent control and extreme longevity in a
compact, lightweight design. It features a larger diaphragm to provide
greater sensitivity.

Sizes 1/4" - 3/4" (DN8 - DN20)

Cv (Kv) up to 4.4 (up to 3,8)

Diaphragm Stainless Steel, Elastomer

Setpoint 1 to 180 psi (0,07 to 12,4 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK63/64 Differential, Jorlon Diaphragm

The Mark 63 is designed to maintain a constant differential between the

pressure on the discharge side of the regulator and the signal pressure
loaded on the diaphragm. The Mark 64 provides the same flow capacity but
with less offset in controlled pressure due to a larger diaphragm. This series
is ideal in fuel oil atomization applications. A negative differential version is
also available.

MK63: 1/4" - 2" (DN8 - DN50)

Sizes
MK64: 1/4" - 3/4" (DN8 - DN20)

Cv (Kv) up to 30 (up to 25,8)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

MK63: 1 to 220 psi (0,07 to 15,2 bar);

Setpoint
MK64: 1 to 180 psi (0,07 to 12,4 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

Double Diaphragm, Flow through Dome, and

Options
Handwheel
1 SLIDING GATE PRESSURE REGULATORS

MK65 Downstream Vacuum Regulators

The Mark 65 Series is ideal for steam, water, oil, gas, air and chemical
services. The vacuum regulators control very accurately and shutoff tightly
to maintain the proper vacuum setting. They are used to maintain vacuums
at predetermined settings and to regulate vacuums on evaporators,
cookers, grinding fixtures, milling machines, altitude chambers and other
vacuum systems.

Sizes 1/2" - 2" (DN15 - DN50)

Cv (Kv) up to 30 (up to 25,8)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Vacuum Range 1" Hg to 25" Hg vacuum (0,035 to 0,886 kg/cm2)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK66 Dome Loaded, High Accuracy

The Mark 66 Series is a highly accurate and economical air loaded pressure
regulator that provides regulation from a local station or from a remote
station. Dome loading combined with the sliding gate seats provide
excellent regulation and rangeability. This valve can be coupled with an
extended range I/P for remote operation. It can also be manually controlled
with a MK12 loading station or a LowFlow JR regulator.

Sizes 1/2" - 6" (DN15 - DN150)

Cv (Kv) up to 395 (up to 340)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Setpoint up to body ratings

Ductile Iron, Bronze, Carbon Steel, Stainless Steel,

Body Material
Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

 Pg. 13

MK6769 Pilot-Operated, High Flow

The Mark 67 Series is for critical pressure reducing applications and

provides greater accuracy and lower offset than can be achieved with a
self-operated regulator. The sliding gate seats provide unsurpassed seat
and diaphragm life, ease of installation, simplified maintenance and more
accurate performance.

Sizes 1/2" - 6" (DN15 - DN150)

Cv (Kv) up to 395 (up to 340)

Diaphragm Stainless Steel, Monel, Hastelloy C, Alloy 20

Setpoint 10 to 200 psi (0,69 to 13,8 bar)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK675 Wafer Style, Jorlon Diaphragm

The Mark 675 Series wafer style sliding gate pressure regulator is used to
regulate the downstream pressure to a predetermined setpoint. The wafer
style design allows for easy installation and maintenance due to its reduced
weight and sliding gate seats. The flow is straight through the valve seats
and body. Direction of the disc travel is perpendicular to the flow, not
opposed to the direction of the flow. The MK675 can use a wider range of
its stroke to give accurate control; less offset.

Sizes 3" - 6" (DN80 - DN150)

Cv (Kv) up to 400 (up to 345)

Diaphragm Jorlon, EPDM, Neoprene/Nylon, Viton, Buna-N

Setpoint 7 - 35 psi (0,48 to 2,41 bar)

Carbon Bar, Carbon Steel, Stainless Steel Bar,

Body Material
Stainless Steel

Closing Cap, Handwheel (Range Options), Bleed Port,

Options
Stainless Bolting, Clean for Oxygen or Oil-Free Service
1 SLIDING GATE BACK PRESSURE REGULATORS

MK50 Self-Operated, Jorlon Diaphragm

The Mark 50 Series handles a broad range of applications including steam,

water, oil, gas, air and chemicals. Excellent capacity and the sliding gate trim
enables the Mark 50 to quickly and accurately regulate upstream pressure,
preventing over-pressure situations.

Sizes 1/4" - 4" (DN8 - DN100)

Cv (Kv) up to 200 (up to 172)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

MK50: 0.5 to 150 psi (0,03 to 10,3 bar)

Setpoint
MK50HP: 75 to 450 psi (5,2 to 31,0 bar)

Ductile Iron, Bronze, Carbon Steel, Stainless Steel,

Body Material
Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK501/502 High Flow, Super High Flow

The Mark 501 and Mark 502 Series are used in applications that require a
higher Cv (Kv) rating without using the next highest line size. The high flow
Mark 501 has Cv's (Kv's) as high as 50 (43) and the super high flow Mark 502
has Cv's (Kv's) up to 70 (60). The sliding gate seats help reduce the build-up
commonly associated with high flow back pressure regulators.

Sizes 1-1/2" - 2" (DN40 - DN50)

Cv (Kv) up to 70 (up to 60)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Setpoint 0.5 to 150 psi (0,03 to 10,3 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

 Pg. 15

MK51 High Sensitivity

The Mark 51 Series handles a broad range of applications including steam,

water, oil, gas, air and chemicals. Excellent capacity and the sliding gate trim
enables the Mark 51 to quickly and accurately regulate upstream pressure,
preventing over-pressure situations. It features a larger diaphragm to
provide greater sensitivity.

Sizes 1/4" - 3/4" (DN8 - DN20)

Cv (Kv) up to 4.4 (up to 3,8)

Diaphragm Stainless Steel, Elastomer

Setpoint 0.5 to 170 psi (0,03 to 11,7 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK53/54 Differential, Jorlon Diaphragm

The Mark 53 is designed to maintain inlet pressure at a set differential

pressure over the signal pressure loaded on the diaphragm. The Mark 54
provides the same flow capacity but with less offset in controlled pressure
due to a larger diaphragm. It can be used for both differential and remotely
adjusted applications. A negative differential version is also available.

MK53: 1/4" - 2" (DN8 - DN50)

Sizes
MK54: 1/4" - 3/4" (DN8 - DN20)

Cv (Kv) up to 30 (up to 25,8)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Mark 53: 0.5 to 150 psi (0,03 to 10,3 bar)

Setpoint
Mark 54: 0.5 to 170 psi (0,03 to 11,7 bar)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

Double Diaphragm, Flow through Dome, and

Options
Handwheel
1 SLIDING GATE BACK PRESSURE REGULATORS

MK55 Upstream Vacuum, Jorlon Diaphragm

The Mark 55 Series control very accurately and shutoff tightly to

maintain the proper vacuum setting. They are used to maintain vacuums
at predetermined settings and to regulate vacuums on evaporators,
cookers, grinding fixtures, milking machines, altitude chambers and other
vacuum systems.

Sizes 1/4" - 2" (DN8 - DN50)

Cv (Kv) up to 30 (up to 25,8)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Vacuum Range 1" Hg to 25" Hg vacuum (0,035 to 0,886 kg/cm2)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK56 Dome Loaded, High Accuracy

The Mark 56 Series is a highly accurate and economical air loaded back
pressure regulator that provides regulation from a local station or from a
remote station. The Mark 56 requires no control spring or pilot. Instead,
a static air signal is applied to the top of the diaphragm to determine the
setpoint. This valve can be coupled with an extended range I/P for remote
operation. It can also be manually controlled with a MK12 loading station or
a LowFlow JR regulator.

Sizes 1/2" - 6" (DN15 - DN150)

Cv (Kv) up to 395 (up to 340)

Diaphragm Jorlon, Stainless Steel, Buna-N, Viton

Setpoint up to body ratings

Ductile Iron, Bronze, Carbon Steel, Stainless Steel,

Body Material
Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

 Pg. 17

MK57 Pilot-Operated, Superior Accuracy

The Mark 57 Series pilot-operated back pressure regulator is designed to

accurately control pressure to 90% of its rated flow capacity with only a
small deviation from setpoint. The Mark 57 provides accuracy that
approaches that of controller-operated valves and should be considered
on most critical applications.

Sizes 1/2" - 6" (DN15 - DN150)

Cv (Kv) up to 395 (up to 340)

Diaphragm Stainless Steel

Setpoint 10 to 185 psi (0,7 to 12,8 bar)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt Weld

MK575 Wafer Style, Jorlon Diaphragm

The Mark 575 Series wafer style sliding gate back pressure regulator is used
to regulate the upstream pressure to a predetermined setpoint. The spring
in the Mark 575 holds the sliding gate seats in their normally closed position.
The wafer style design allows for easy installation and maintenance due to
its reduced weight and sliding gate seats.

Sizes 3" - 6" (DN80 - DN150)

Cv (Kv) up to 400 (up to 345)

Diaphragm Jorlon, EPDM, Neoprene/Nylon, Viton, Buna-N

Setpoint 4 - 30 psi (0,28 to 2,07 bar)

Carbon Bar, Carbon Steel, Stainless Steel Bar,

Body Material
Stainless Steel

Handwheel (In Range), Stainless Bolting, Clean for

Options
Oxygen or Oil-Free Service
2
TEMPERATURE
REGULATORS
For accurate temperature control - count on There are three key components to our
Jordan Valve and the entire Mark 80 Series temperature regulators: the sensing bulb, the
product line. stainless steel welded actuator and the sliding
Whether your application is tank heating, gate seats. You can expect accurate
steam tracing, heat exchanging, air drying or mechanical temperature control and proven
regulated cooling, our regulators will maintain reliability every time you use any of our
temperature without the need for external temperature regulators.
power or additional instrumentation.
 Pg. 19

Custom capillary lengths up to 100 feet (30 meters)

Variety of thermal fills allow for temperature control from

-20°F (-29°C) to 450°F (232°C)

Stainless Steel diaphragm eliminates failure caused by metal fatigue, the most
common failure in bellows actuators

The upper and lower casings and diaphragm are

heliarc welded around the circumference to fuse
a solid bond eliminating the need for a gasket - a
common source for leakage

A variety of sensing bulbs available

Sliding gate seats have a shorter stroke than globe valves, thus the temperature
span (the number of degrees from full open to just closed) is as low as 8°F (4°C)

Sliding gate seats provide

• Straight-through flow for reduced turbulence and quiet operation
• Short stroke for fast response and accurate temperature control
• Easily interchangeable Cv's (Kv's)
• Tight shutoff due to overlap of seat closure area
2 TEMPERATURE REGULATORS
MK80 Self-Operated , No External Power Source

The Mark 80 Series is completely self-operated and requires no external power source
or other expensive instrumentation to operate the valve. Depending on valve action,
the seats open or close as bulb senses rise in temperature. The Mark 80 has high
rangeability - controls flows from 10% to 90% of rated capacity. Available with up to
100 feet (30 meters) in capillaries.

Sizes 1/4"- 2" (DN8 - DN50)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 30 (up to 26)

Seat Material Jorcote

Control Range -20°F (-29°C) to 450°F (232°C)

MK801/802 Self-Operated, High Flow

The Mark 801/802 Series is completely self-operated and requires no external power
source or other expensive instrumentation to operate the valve. The Mark 801/802
Series are high-flow versions of our Mark 80 Series temperature regulators. Available
with up to 100 feet (30 meters) in capillaries.

Sizes 1/2" - 2" (DN15 - DN50)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 70 (up to 60)

Seat Material Jorcote

Control Range -20°F (-29°C) to 325°F (163°C)

MK85 Controlled Failure Option

The Mark 85 Series is a self-operated temperature regulator with controlled failure

option which allows you to predetermine the position of the valve in the event of a
thermal system failure. The Mark 85 is designed to fail closed on heating applications
and to fail open on cooling applications. The Mark 85 Series is ideal for slower
responding systems such as autoclaves and large storage tanks.

Sizes 1/4"- 3/4" (DN8 - DN20)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 4.4 (up to 3,8)

Seat Material Jorcote

Control Range 40°F (4°C) to 285°F (141°C)

 Pg. 21

MK86 Ambient Temperature

The Mark 86 regulator is designed to control steam tracing lines based on ambient
temperatures. The MK86 allows steam to flow through the tracer lines only when it is
needed, then opens or closes when ambient temperature rises above or below the
setpoint depending up action.

Sizes 1/2" - 2" (DN15 - DN50)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 30 (up to 25,8)

Seat Materials Jorcote

Control Range 5°F (-15°C) to 210°F (99°C)

MK87 Externally Piloted

The Mark 87 piloted temperature regulator is the sliding gate valve engineered to
provide wide rangeability, and greater accuracy, for a variety of temperature control
applications. Designed with the same technology as the Mark 80, the Mark 87 is a piloted
temperature regulator that offers quality and performance. It can be used where larger
line sizes and higher flow rates are required.

Sizes 1/2" - 6" (DN15 - DN150)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Cast Iron

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 395 (up to 340)

Seat Materials Jorcote

Control Range -20°F (-29°C) to 450°F (232°C)

MK89/89MX Three-Way, Diverting or Mixing Service

The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers
or filters. In this configuration, there is one inlet and two outlets. As one outlet closes, the
other outlet opens, diverting flow from one channel to the other. The Mark 89MX is ideal
for mixing service.

Sizes 1-1/2" - 2" (DN0 - DN50)

Body Material Carbon Steel, Stainless Steel

End Connection Threaded, Socket Weld, Flanged

Cv (Kv) up to 30 (up to 25,8)

Seat Materials Jorcote

Control Range -20°F (-29°C) to 450°F (232°C)

3
TANK BLANKETING
& GAS
REGULATORS
Jordan Valve tank blanketing and gas count on Jordan Valve's tank blanketing
valves ensure that a constant gas pressure valves to offer the perfect solutions.
is maintained in the vapor space of a A wide range of gas and tank blanketing
storage tank. valves are available including self-operated
Whether your application is chemical, or pilot-operated, internally sensed, balanced
petrochemical, oil & gas, water & waste plug, double seated or pilot operated.
water treatment, or food & beverage,
 Pg. 23

Ensures compliance with environmental standards

since tank blanketing uses inert gas to keep vapors
from escaping into the atmosphere

Tank blanketing can reduce the oxygen content

in the vapor space. The reduced oxygen content
lowers the risk of combustion

Simple design, increased reliability,

low maintenance costs

Responds to very small changes in tank pressure

by throttling open or closed to maintain the desired
pressure set point

ANSI Class VI shutoff

3 TANK BLANKETING & GAS REGULATORS
MK608 Gas Pressure Regulator, Balanced Plug

The Mark 608 gas pressure regulator is used on large tank blanketing applications or
other low pressure gas regulation. In a tank blanketing application, the Mark 608 is used
to control the flow of the blanketing gas into the tank to maintain the proper positive
pressure. Once the blanket has been established, a small flow of nitrogen is continually
admitted to the tank to keep the blanket fresh.

Sizes 1-1/2" - 2" (DN40 - DN50)

Body Material Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged

Buna-N/Nylon, Viton/Nomex, EPDM with Polyester

Diaphragm
Reinforcement

Setpoint 2" w.c. to 5 psi (5,0 mbar to 0,34 bar)

Max Inlet Pressure 60 psi (4 bar)

MK608IS Gas, Low Pressure, Internal Sensing

The Mark 608IS gas pressure regulator is the ideal valve for low pressure gas regulation.
The self-contained low pressure gas regulator is for use on tank blanketing, gas meter
inlet pressure regulating, gas burners and other low pressure air and gas applications.
The valve can be installed in any position and can be easily repositioned in-line.

Sizes 3/4" - 1-1/4" (DN20 - DN32)

Body Material Carbon Steel, Stainless Steel

End Connection Threaded, Flanged

Diaphragm Viton

Setpoint 1" w.c. to 3.5 psi (2,5 mbar to 0,24 bar)

Max Inlet Pressure 150 psi (10 bar)

MK608BP Balanced Plug, ANSI Class VI

The Mark 608BP balanced plug gas pressure regulator is the ideal valve for low pressure
gas regulation with higher inlet pressures. The self-contained low pressure gas regulator
is for use on tank blanketing, gas meter inlet pressure regulating and other low pressure
air and gas applications. The valve can be installed in any position and can be easily
repositioned in-line.

Sizes 3/4" - 1" (DN20 - DN25)

Body Material Ductile Iron, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged

Diaphragm Buna-N/Nylon (DI body); Viton (CS & SS body)

Setpoint 2" w.c. to 3.5 psi (5,0 mbar to 0,24 bar)

Max Inlet Pressure 150 psi (10 bar)

 Pg. 25

MK608DS Low Pressure Double Seated

The Mark 608DS is a double-seated, self-operated gas regulator for use in tank
blanketing applications. The double seated design allows the Mark 608DS to handle
increased flow and higher pressure drops than similarly sized single seat valve types
while maintaining ANSI Class VI shutoff.

Sizes 1-1/2" - 2" (DN40 - DN50)

Body Material Carbon Steel, Stainless Steel

End Connection ANSI Class 150/300 Integrally Flanged

Diaphragm Buna-N, Viton, EPDM

1-1/2": 5 Cv, orifice 9/16" (DN40: 4,3 Kv, orifice 14mm);

Cv (Kv)
2": 17 Cv, orifice 1" (DN50: 14, 7 Kv, orifice 26mm)

Max Inlet Pressure 150 psi (10,3 bar)

MK688 Piloted Soft Seat Regulators, ANSI Class VI

The Mark 688 Series piloted soft seat regulator is designed specifically to provide
accurate pressure control on very low pressure tank blanketing systems. The pilot
operated Mark 688 responds to very small changes in tank pressure by throttling open
or closed to maintain the desired pressure set point.

Sizes 1" - 2" (DN25 - DN50)

Body Material Carbon Steel, Stainless Steel

End Connection ANSI Flanges 150/300 #

Diaphragm Buna-N

Cv (Kv) 1": 17; 1-1/2": 30 ; 2": 45 (DN: 25: 14,7; DN40: 26,0; DN50: 38,9)

Max Inlet Pressure 200 psi (13,8 bar)

MK695 Piloted, Very Low Set Points

The Mark 695 Series piloted soft seat regulator is designed specifically to provide
accurate pressure control on very low pressure tank blanketing systems. The pilot
operated Mark 695 responds to very small changes in tank pressure by throttling open
or closed to maintain the desired pressure set point.

Sizes 3/4", 1" (DN20, DN25)

Body Material Carbon Steel, Stainless Steel

End Connection NPT, ANSI Flanges 150#, 300#

Diaphragm Teflon Sheet

Cv (Kv) 1, 2, 4, 7.5, 10 (0,86; 1,73; 3,5; 6,5; 8,7)

Max Inlet Pressure 200 psi (13,8 bar)

3 TANK BLANKETING & GAS REGULATORS
MK695 Gas Regulators, 2 Inch, Internally Piloted

The 2" Mark 695 is an internally piloted tank blanketing regulator. Pre-formed Jorlon is
used for the diaphragm for maximum sensitivity to minute pressure changes inside the
tank. Optional features include: inline or angle bodies, purge system and outlet gauges.

Sizes 2" (DN50)

Body Material Carbon Steel, 316L

End Connection Threaded, Flanged, Socket Weld, Butt Weld

Diaphragm Pre-formed Jorlon

Flow Capacity Cv (Kv) 10 (8,6); 19 (16,3), 28 (24,1),48 (41,3)

0.5 - 5.4 wc (1,25 mb - 13,4 mb);

Set Pressure
4 - 18 wc (9,96 mb - 44,8 mb)

MK695X Small Tanks, Accurate Pressure Control

The Mark 695X Series regulator is designed specifically to provide accurate pressure
control on very low pressure tank blanketing systems. The Mark 695X responds to very
small changes in tank pressure by throttling open or closed to maintain the desired
pressure set point. It has an ultralight diaphragm for maximum sensitivity.

Sizes 1/2" - 3/4" (DN15 - DN20)

Body Material 316L Stainless Steel

End Connection FNPT, ANSI & DIN Flanges

Diaphragm Ultra Lightweight Teflon

0.5 - 5.5 wc (1,25 mb - 13,7 mb);

Spring Ranges
4 - 10 wc (9,96 mb - 24,9 mb)

MK508 Gas Back Pressure Regulator

The Mark 508 Series gas back pressure regulator is the ideal valve for low back pressure
gas services. The Mark 508 works in conjunction with the Mark 608, in a low pressure
tank blanketing valve system. The Mark 508 can be used to vent gas from the tank to
prevent the blanketing pressure from rising to a level that could damage the tank while
maintaining a small constant flow to keep the blanket fresh. It will also work well in any
other type of low back pressure application.

Sizes 3/4" - 2" (DN20 - DN50)

Body Material Carbon Steel, Stainless Steel

End Connection Threaded, Flanged

Diaphragm Viton

Max Inlet Pressure 20 psi (1,7 bar)

 Pg. 27

MK627 Gas Regulator, Self-Operated, High Inlet Pressure

The Mark 627 Series is a self-operated, pressure-reducing regulator and is designed to

provide tight-shutoff and accurate regulation on low or high pressure systems. It can be
used on air, natural gas or a variety of other gases. The top entry design allows for easy
in-line maintenance.

Sizes 3/4", 1", 2" (DN20, DN25, DN50)

Body Material Carbon Steel, Ductile Iron, Stainless Steel

End Connection FNPT (contact factory for other options)

Diaphragm Nitrile

3/32" (2mm); 1/8" (3mm); 3/16" (5mm); 1/4" (6mm); 3/8"

Orifice Size
(10mm); 1/2" (13mm) - interchangeable

MK630 Gas Regulator, Self-Operated, High Inlet Pressure

The Mark 630 Series is a self-operated pressure reducing regulator designed to provide
tight shutoff and accurate regulation on high pressure gas systems. It can be used on air
and a variety of gases. It is designed to handle inlet pressures up to 1500 psi (103 bar).

Sizes 1" & 2" (DN25 & DN50)

Body Materials 1" Carbon Steel (WCB A216); 2" Ductile Iron

End Connection FNPT (contact factory for other options)

Diaphragm Neoprene, Viton

1/8" (3mm); 3/16" (5mm); 1/4" (6mm); 3/8" (10mm); 1/2" (13mm)
Orifice Sizes
- interchangeable

MK687 Piloted, Critical Pressure Reducing Applications

The Mark 687 Series is a piloted soft seat regulator for critical pressure reducing
applications. It uses balance plug trim with the action of a pilot valve to create a faster,
more accurate (meaning less droop as your flows increase) response.

Sizes 1-1/2" - 2" (DN40 - DN50)

Cv (Kv) 1-1/2": 40 (34); 2": 50 (43)

Seat 316SS/PTFE

Carbon Steel (ASME SA216 WCB) & Stainless Steel

Body Material
(ASME SA351 CF8M)

End Connection Threaded & Flanged (ANSI 150#, 300# and DIN PN10/16, PN25/40)

Min&MaxPressureDrop 25 psi minimum (1,7 bar); 150 psi maximum (10,3 bar)
4 GLOBE STYLE REGULATING VALVES
MK68G Globe , High Capacity, Accurate

The Mark 68G offers high capacity, accurate regulation and easy servicing, making it the
ideal choice for your industrial grade pressure reducing applications. The MK68G can be
supplied with a hard seat for ANSI Class IV shutoff or a soft seat for ANSI Class VI
shutoff. Easily removable bottom cap allows quick access for replacing seat and plug.

Sizes 1/4"- 2" (DN8 - DN50)

Body Material Ductile Iron, Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld

Diaphragm Stainless Steel, Jorlon, Buna-N/Nylon, Viton/Nomex

Seat Plug: Buna-N, Viton, Hardened 17-4 pH Stainless Steel, EPDM

Cv (Kv) up to 19 (up to 16,3)

MK686G Air-Loaded, GlobeTrim, ANSI IV or VI

The Mark 686G features air-loading, high capacities, accurate regulation, and easy
servicing, making it an exceptional choice for your pressure regulating applications. The
Mark 686G has a large effective diaphragm area for increased accuracy and sensitivity
along with large orifices and body passages which provides high flow capacities. Easily
removable bottom cap allows quick access for replacing seat and plug.

Sizes 1/4" - 2" (DN8 - DN50)

Body Material Carbon Steel, Stainless Steel, Ductile Iron, Bronze

End Connection Threaded, Flanged

Diaphragm Buna-N/Nylon, Stainless Steel, Viton/Nomex, Jorlon

Seat Plug - Buna-N, Viton, Hardened 17-4 pH Stainless Steel, EPDM

Max Inlet Pressure 300 psi (20,7 bar)

MK58FT/A Cage Trim, Dual Inlet & Outlet for Through-Flow

The Mark 58 Series features three ports: a bypass outlet on the bottom and two side
ports which are directly connected to serve as dual inlet and outlet for through-flow. The
Mark 58FT is designed to be installed in a "T" fashion such that the fluid normally flows
in one side and out the other side; whereas the Mark 58A is designed to be installed with
one side port as an inlet and the other side port plugged with the flow being relieved
through the bottom bypass.

Sizes 1/4" through 2" (DN8 through DN50)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Bronze

End Connection Threaded, Flanged, Socket Weld

Diaphragm Buna-N/, EPDM, Jorlon, 316/316L SST, Viton/Nomex

Cv (Kv) up to 32.4 (up to 28,0)

Cage Materials Electro-nickel plated steel or SS depending on body material

 Pg. 29

MK5108 Piloted, Back Pressure Regulating Valve

In many liquid piping systems, it is vital that line pressure is maintained within relatively
narrow limits. Installed in the main flow line, the standard Mark 5108-2 acts as a back
pressure or pressure sustaining valve. In this configuration, the valve maintains a
constant upstream pressure regardless of fluctuating downstream demand. When
used in a bypass line, the same model will function as a relief valve.

Sizes 1-1/4" - 24"

Body Materials Ductile Iron, Cast Steel, Cast Bronze, Stainless Steel

End Connection Flanged (#150, #300), Screwed, Grooved End

Diaphragm Buna-N, Viton, EPDM

Max Inlet Pressure 740 psi (51 bar)

MK6127 Piloted, Liquid Pressure Regulating Valves

The Mark 6127 pressure-reducing valve is used in many applications worldwide. The
primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser,
more manageable downstream pressure, and operate without regard to either upstream
supply or downstream demand. The valve is easily maintained without removal from
the line.

Sizes 1-1/4" - 24"

Body Material Ductile Iron, Cast Steel, Cast Bronze, Stainless Steel

End Connection Flanged (#150, #300), Screwed, Grooved End

Diaphragm Buna-N, Viton, EPDM

Max Inlet Pressure 740 psi (51 bar)

5
SLIDING GATE
CONTROL VALVES
Whether you are trying to control pressure, chemical refining and numerous other
temperature, level, Ph or flow rate, count on applications. The sliding gate seat design
Jordan Valve sliding gate control valves. We offers straight-through flow, short stroke and
can assist you with the proper control valve fast response, quiet operation, easily
and the right accessories to meet the needs interchangeable Cv's (Kv's) and tight shut off.
for your specific application. Our control The simplistic design of the sliding gate valve
valves are ideal for steam, utility, petroleum, makes maintenance easy to perform.
 Pg. 31

Variety of actuators including pneumatic,

motorized, piston and handwheel

Namur-compliant, one-piece yoke with

flexible mounting options for a variety of
positioners and other accessories

Shorter stroke means smaller actuators can operate the valve,

increasing the accuracy while reducing the overall weight and
air consumption

Sliding gate seats provide

• Straight-through flow for reduced turbulence and quiet operation
• Short stroke for fast response and accurate control
• Easily interchangeable Cv's (Kv's)
• Tight shutoff due to overlap of seat closure area
5 SLIDING GATE CONTROL VALVES
MK70 Diaphragm Control Valve

The Mark 70 Series is a line of pneumatically-operated diaphragm control valves that

combine multiple spring actuators with the precision of the sliding gate seat for closer
control and greater accuracy. A side or top-mounted positioner is available to overcome
the normal hysteresis for a control valve and actuator and to ensure that the valve stem
position is always directly proportional to the control valve command signal.

Sizes 1/4"- 2" (DN8 - DN50)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Bronze

Seat material Jorcote on SST standard

Cv (Kv) up to 30 (up to 26)

Action Direct (ATC) or Reverse (ATO)

Ranges 3-15 psi, 6-30 psi (0,2-1,0 bar; 0,4-2,1 bar) or split ranges

MK701/702 High Flow, Higher Cvs (Kvs)

The Mark 701/702 high flow sliding gate control valve provides higher Cv (Kv) without going to a
larger valve, straight through flow and ease of maintenance. A side or top-mounted positioner
is available to overcome the normal hysteresis for a control valve and actuator and to
ensure that the valve stem position is always directly proportional to the control valve
command signal.

Sizes 1/2"- 2" (DN15 - DN50)

Body Material Ductile Iron, Carbon Steel, Stainless Steel, Bronze

Seat material Jorcote on SST standard

Cv (Kv) up to 70 (up to 60,3)

Action Direct (ATC) or Reverse (ATO)

Ranges 3-15 psi, 6-30 psi (0,2-1,0 bar; 0,4-2,1 bar) or split ranges

MK75 Wafer Style, Compact Size, Very Precise

The Mark 75 is a lightweight, compact wafer-style body that weighs 10 times less than
a traditional valve. We manufacture the valves using less steel and other raw materials.
The shipping size, weight, packaging waste and costs decrease dramatically. The Mark
75 uses fewer fossil fuels not only when it is built and shipped, but also less power in its
day-to-day operations and fewer resources when it needs maintenance.

Sizes 1"- 8" (DN25 - DN200)

Body Material Stainless Steel, Carbon Steel

Cv (Kv) up to 600 (up to 519)

3-15, 3-9*, 9-15*, 6-30 psi

Ranges
(0,2-1,0; 0,2-0,6*; 0,6-1,0*; 0,4-2,1 bar) * positioner required

Turndown Ratio 100:1

Shutoff ANSI Class IV tightness

 Pg. 33

MK75HW Wafer Style, Hand Operated, Precise Adjustment

The Mark 75HW is a manually operated, sliding gate control valve. The hand wheel
operator allows the user to manually position the valve for optimum flow and lock in
place. The Mark 75HW features a 'T' slot design connection to the disc. This connection
allows for quick and easy reversing of functions. The valve can go from reverse acting
to direct acting (or vice versa).

Sizes 1"- 2" (DN25 - DN50)

Body Material 316 Stainless Steel, Carbon Steel

Seat Materials Jorcote/316SS standard

Cv (Kv) up to 72 (up to 62)

Turndown Ratio
100:1
Capability

Max Inlet Pressure 150 psi (10 bar)

MK75PTP Piston Operated with Smart Positioner

The Mark 75PTP is a Mark 75 wafer style control valve with an 80mm stainless steel
piston actuator. The Gemu cPOS smart positioner is standard and required for control
applications. For on/off service, the valve may be supplied without a positioner. The
JVCV should be used for sizing selection. The "T" slot design connection allows for quick
and easy reversing of function - from reverse acting to direct acting (or vice versa).

Sizes 1"- 2" (DN25 - DN50)

Body Material Stainless Steel, Carbon Steel

Max Pressure Drop 125 psi (8,6 bar) with standard piston actuator and spring

1": 12.7 - 14.7 psi (0,88 - 1,01 bar) ; 1-1/2": 12.7 - 16.7 psi
Ranges
(0,88 - 1,15 bar); 2" 12.7 - 19.1 psi (0,88 - 1,32 bar)

Turndown Ratio 100:1

Shutoff ANSI Class IV tightness

MK75MV Wafer Style, Motor Operated, High Accuracy

The Mark 75MV is a lightweight, compact wafer-style body that weighs 10 times less
than a traditional valve and comes standard with a motor valve. The motor can operate
on 120 or 240 VAC with 24 VDC as an option. The Mark 75 uses fewer fossil fuels not
only when it is built and shipped, but also less power in its day-to-day operations and
fewer resources when it needs maintenance.

Sizes 1"- 6" (DN25 - DN150)

Body Material Stainless Steel, Carbon Steel

Cv (Kv) up to 400 (up to 345)

Ranges 4-20mA; 4-12mA; 12-20mA; 0-5 VDC; 0-10 VDC, On/Off

Turndown Ratio 100:1

Shutoff ANSI Class IV tightness

5 SLIDING GATE CONTROL VALVES

MK33 Motor Operated, Electric Valve

The Mark 33 is a motor operated valve featuring the Jordan sliding gate
seat and heavy-duty industrial motors for proportional (resistance), on-off,
or 4-20 mA electronic format. The Mark 331/332 is the high flow version of
this valve, and the Mark 337 is the equal percentage version. Optional spring
return available.

Sizes 1/4" - 2" (DN8 - DN50)

Body Material Carbon Steel, Stainless Steel, Ductile Iron, Bronze

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

MK 33: up to 30 (up to 25,9); MK331: up to 50

Cv (Kv)
(up to 43,3); MK332: up to 70 (up to 60,6)

Seat Material Jorcote

Command
Proportional (resistance), on/off, 4-20mA or 2-10 VDC
Signals

MK37 Final Control Element Valves

The Mark 37 is a motor-operated control valve that combines a state-of-

the-art electronic linear actuator with the exceptional performance of
Jordan's sliding gate seat design. The result is a superior degree of accuracy
that makes it ideal for use as the final control element in distributed process
control systems. The Mark 371/372 is the high flow version and the Mark
377 is the equal percentage version.

Sizes 1/4" - 6" (DN8 - DN150)

Carbon Steel, Stainless Steel, Ductile Iron, Cast Iron,

Body Material
Bronze

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 395 (up to 340)

Seat Material Jorcote

Command
Current or voltage command, on/off
Signals
 Pg. 35

MK74 Bellows Seal, Minimal Movement

The Mark 74 provides exceptional bellows life with a valve stroke that is just
a fraction of that of other rising stem valves. This means Jordan Valve can
use a smaller formed bellows that has minimal movement during operation.

Sizes 1/2" - 2" (DN8 - DN50)

Body Material Carbon Steel, Stainless Steel, Ductile Iron, Bronze

Seat Materials Jorcote/316SS

Cv (Kv) up to 30 (up to 10,3)

Action Direct (ATC) or Reverse (ATO)

Ranges 3-15 psi, 6-30 psi (0,2-1,0 bar, 0,4-2,1 bar) or split ranges

MK79/79MX Three-Way, Bypass or Mixing

The Mark 79 is a pneumatic three-way control valve for use in either bypass
or mixing service. The Mark 79 utilizes the unique sliding gate trim design to
provide excellent control with superior longevity. Each valve contains
two sets of sliding gate seats connected to a common valve stem for
synchronized movement, whether in by-pass or mixing mode.

Sizes 1-1/2" & 2" (DN40 & DN50)

Body Material Carbon Steel, Stainless Steel

End Connection Flanged, Threaded

Cv (Kv) up to 30 (up to 25,9)

Trim Material Carbon Steel, Stainless Steel

Control Ranges 3-15 psi (0,2-1 bar); others upon request

6 GLOBE STYLE CONTROL VALVES

MK78 Globe Style, Accurate Performance

The Mark 78 is designed for accurate performance and simplified

maintenance. This versatile product can be used on a variety of applications,
including viscous/corrosive liquids, process gases or steam in process or
utility service. The top entry cage design allows maintenance while the
valve is in the line. Characterized flow options including linear, equal
percentage, quick opening, or an equal-linear combination.

Sizes 1/2"- 2" (DN15 - DN50)

Body Material Bronze, Carbon Steel, Stainless Steel

End Connection Threaded, Flanged, Socket Weld, Butt-Weld

Cv (Kv) up to 50 (up to 43)

Seat ANSI Class IV (hard seat); ANSI Class VI Teflon (soft seat)

3-15 psi; 6-30 psi (0,2-1,0 bar; 0,4-2,1 bar) or split ranges*
Control Ranges
* positioner required

MK2000 Angle Seat, On/Off

The Mark 2000 is an angle-seat valve with self-adjusting packing gland,

intermediate relief and wiper. The angle-seat construction of the body
makes possible extremely high flow rates, particularly in
comparison to conventional globe valves.

Sizes 1/2" - 2" (DN15 - DN50)

Body Material 316SST

End Connection Threaded (NPT)

Pressure Range 0 - 362 psi, max (0 - 25 bar)

Packing
Spring loaded, PTFE-V Rings
Materials

Solenoid
125VAC or 24VDC
Options
 Pg. 37

MK ED & ET Single Port, Globe Style

The Mark ED and ET are single port, globe style bodies with composition or
metal seats, and a balanced valve plug with "push down to close" action.
The Mark ED is intended for general control applications over a wide variety
of temperature and pressure drops. The Mark ET has a balanced tight shut
off, and is used in applications requiring low leakage rates.

Sizes 1" - 8"

Pressure Classes ASME Class 150, 300 and 600

End Connection Raised Face or Ring Type Joint Flanges

Body Material LCC, WCB, WCC, WC9, C5, Monel, CF8M (SST)

Flow
Linear, Quick Opening or Equal Percentage
Characteristic

Shut off Mark ET: Class IV & V; Mark ED: ANSI Class II & III

MK EZ Globe Style, Quick Change Trim

The Mark EZ valves are globe style valves with integral end connections,
post guiding and features quick change trim.

Sizes 1" - 4"

Pressure Classes ASME Class 150, 300 and 600

End Connection Raised Face or Ring Type Joint Flanges

Body Material LCC, WCB, WCC, WC9, C5, Monel, CF8M (SST)

Flow
Linear, Quick Opening or Equal Percentage
Characteristic

Mark EWD: Class II, III & IV; Mark EWS: Class IV & V;
Shut off
Mark EWT: Class IV & V
6 GLOBE STYLE CONTROL VALVES

MK EW Large Globe Style, Internal Flow Cavities

The Mark EW valve bodies are single port, globe style bodies with cage
guiding, clamped seat rings and push down to close valve plug action. The
series features large end connections and expanded internal flow cavities.

Sizes 8 x 6, 10 x 8, 12 x 6, 16 x 12, 20 x 16, 24 x 16, 24 x 20

Pressure Classes ASME Class 150 through 900

End Connection Raised Face, Ring Type Joint and Welded Flanges

Body Material LCC, WCB, WCC, WC9, C5, Monel, CF8M (SST)

Flow
Linear, Quick Opening or Equal Percentage
Characteristic

Mark EWD: Class II, III & IV; Mark EWS: Class IV & V;
Shut off
Mark EWT: Class IV & V

MK HPX & HPAX Globe & Angle

The Mark HPX is designed for high pressure applications in the process
industry. Valves are cage guided, with metal seats and quick change trim.
Balanced plugs are "push down to close". The Mark HPX is a straight globe
valve while the HPAX is an angle valve. Percentage, quick opening, or an
equal-linear combination.

Sizes 2", 3", 4", 6"

Pressure Classes ASME 900 through 2500

End Connection Raised Face, Ring Type Joint, Welded Flanges

Body Material LCC, WCB, CF8M, CF3M, WCC

Flow
Linear, Equal Percentage and Quick Opening
Characteristic

Shut off Class II, III, IV & V

 Pg. 39

MK H900/H2500 Single Port, Globe Style

The Mark H2D is a single port, globe style body with cage guiding and
balanced valve plug with "push down to close" action. Metal seat, piston
rings are used to provide the seal between the valve plug and cage. The
Mark H5T is a single port, globe style body with cage guiding, balanced
valve plug, metal seat, and pressure assisted spring seal to provide the
seal between the valve plug and cage.

Sizes 3", 4" & 6"

Pressure Classes ASME 900 through 2500

End Connection Raised Face, Ring Type Joint and Welded Flanges

Body Material LCC, WCB, CF8M, CF3M, WCC

Flow
Linear, Quick Opening or Equal Percentage
Characteristic

Shut off Class II, III, IV & V

MK V-100 Rotary Control Valves

The Mark V-100 ball valve design utilizes a standard ball with a triangular
shaped wedge formed in it. This design allows for both throttling control
and on/off service used in conjunction with a variety of actuators.

Sizes 2" - 12"

Pressure Classes ASME Class 150, 300 & 600

End Connection Wafer Style (flangeless)

Body Material LCC, WCB, CF8M (316SS)

Flow Modified Equal Percentage with forward flow into the

Characteristic convex side of the v-ball

Shut off Class IV

 www.jordanvalve.com

3170 Wasson Rd. Cincinnati, OH 45209 • jordan@richardsind.com

© JordanValve 2019 05/19