570N EP LOADER/TOOL CARRIER

TIER 4 FINAL CERTIFIED

DRIVETRAIN OPERATOR ENVIRONMENT

Transmission – standard: ROPS/FOPS certified protective canopy;

4F-4R Power Shuttle Synchromesh 2 halogen headlights; 2 rear flood lights; 2 rear
Transmission manual gear shift, tail and stop lights; 2 front flashers/turn lights;
fully synchronized 2 rear flashers/turn lights; Anti-vandalism cover
for dash and front console – w/ canopy only;
Gear ratios Forward/Reverse Pre-wired for radio – cab only; Rear fenders w/
1st 5.603/5.603 storage tray and molded beverage and thermos
2nd 3.481/3.481 holder; Coat hook w/ garment strap; Interior
3rd 1.584/1.584 rearview mirror; non-suspension seat – 15 degree
4th 0.793/0.793 and 30 degree swivel to the right; 2 in (51 mm)
retractable seat belt; Cup holder/storage tray
Travel speeds* mph (kph)
mounted on LH fender.
1st 3.8 (6.1)
2nd 6.1 (9.8) Gauges:
Engine water temperature; Converter oil
ENGINE 3rd 12.8 (20.6)
temperature; Fuel level; Tachometer/
4th 24.0 (38.6)
hourmeter; Voltmeter.
Model FPT F5HFL463D Torque converter ratio* 3.01 Warning lights:
Emissions Certification Tier 4 Final Differential-lock On-the-go Air cleaner restriction; Alternator; A/C high
Type Diesel 4-stroke, Turbocharged push-button activation pressure; Cold start; Engine oil pressure
low; Hydraulic oil filter bypass; Parking brake
Cylinders 4 Front 4WD/Rear axle*: engagement; Low fuel; Water in fuel.
Bore/Stroke 3.90 x 4.33 in Differential ratio 2.0/2.5
Audible alarms:
(99 x 110 mm) Planetary hub ratio 6.0/6.4 Coolant temperature; Engine oil pressure;
Total reduction ratio 12.0/16.0 Parking brake engagement; Shuttle
Displacement 207 in3 (3.4 L)
Axles rating: engagement/seat position; Backup; Horn.
Fuel injection Direct, high pressure
Maximum static – lb (kg):
common rail – HPCR
70,821 (32 124)/90,145 (40 889)/
Fuel Diesel
OPERATING WEIGHT
58,448 (26 511)
Cooling Charged air Dynamic operating – lb (kg): Configuration 1 – Lightest:
44,261 (20 076)/56,200 (25 492)/ 82 in (2.08 m) Standard bucket, 4WD,
Engine speeds RPM 19.5 L x 24.0 rear tires, ROPS canopy,
Rated speed – full load 2200 35,575 (16 136)
suspension seat, dual batteries, no operator:
Low idle 900 – 1000 Static operating – lb (kg): 11,134 lb (5 051 kg)
High idle – no load 2330 – 2430 17,704 (8 030)/22,480 (10 197)/ Configuration 2 – Heaviest:
Horsepower @ 2200 RPM: 14,230 (6 455) 82 in (2.08 m) 4 IN 1® bucket, 4WD,
Gross 74 hp (55 kW) Service brakes: 19.5 L x 24.0 rear tires, enclosed cab,
Net* 72 hp (54 kW) Individually applied, hydraulically actuated, suspension seat, dual batteries, no operator,
maintenance-free, outboard mounted, 440 lb front weight, 3-point hitch, box scraper:
Maximum torque @ 1400 RPM:
wet disc, 2 per side. 14,508 lb (6 581 kg)
Gross 235 lb·ft (316 N·m)
Net* 228 lb·ft (310 N·m) Parking brakes Trans Mounted Attachments:
spring-applied 82 in (2.08 m) buckets:
Torque rise at rated speed 35% +/- 5%
hydraulic release – SAHR 4 IN 1® 1,451 lb (658 kg)
Radiator: General purpose 686 lb (311 kg)
Core size area 486 in2 (3 145 cm2) NOTE: Travel speeds at 2293 engine RPM
Box scraper 1,592 lb (722 kg)
Rows of tubes 5 w/ 19.5 L x 24.0 rear tires.
*Specs listed will differ w/ PTO option. Cab – over canopy 646 lb (293 kg)
33 Degree fan:
Driveshaft guard 218 lb (99 kg)
Style 7 blade suction
Ratio 1.1:1 ELECTRICAL Weights:
Counterweight 3,000 lb (1 360 kg)
Water pump style Integral Voltage 12 Volts
Rear weight 500 lb (227 kg)
Engine oil CJ-4 – semi-synthetic 10W40 Alternator 120 amp Front weight 440 lb (200 kg)
Pump operating angle ratings: Battery 850 cold-cranking amps
Side to side Rated 35° Opt. batteries – 2 850 cold-cranking amps
Fore and aft Rated 35°
Oil filtration Replaceable, spin on Power plugs – 2 30 amps total

NOTE: *with viscous fan.

1 of 4
HYDRAULICS OTHER SPECIFICATIONS
Pump Gear pump 3-point hitch:
Capacity 28.5 gal/min @ 3,000 psi Category I & II 3-point hitch
(108 L/min @ 207 ba) Hydraulic lift, pitch, tilt and 2 auxiliary remotes
Vertical lift force:
SERVICE CAPACITIES Lowest point 2,500 lb (11 121 N)
1/5 3,247 lb (14 444 N)
Fuel tank 30 gal (114.0 L) 2/5 3,400 lb (15 125 N)
Hydraulic system: 3/5 3,501 lb (15 574 N)
Total 72 qt (68.0 L) 4/5 3,297 lb (14 666 N)
Reservoir w/ filter 58 qt (55.0 L) Highest point 2,984 lb (13 274 N)
Reservoir w/o filter 56 qt (53.0 L) Front tires:
Transmission: 2WD – 11.0 L x 16.0, 10-ply rating
2WD – total 18 qt (17.0 L) 4WD – 12.0 L x 16.5, 8-ply rating
Reservoir 11 qt (10.4 L) Rear tires:
4WD – total 21 qt (20.0 L) 2/4WD – 19.5 L x 24.0, 10-ply rating
Reservoir 14 qt (13.2 L) 2/4WD – 17.5 L x 24.0, 10-ply rating
Front axle:
Differential 5.8 qt (5.5 L)
Planetaries – each 0.7 qt (0.7 L)
Rear axle:
Differential 14.4 qt (13.6 L)
Engine oil w/ filter 8.5 qt (8.0 L)
Cooling system 18.3 qt (17.3 L)
Turning radius - curb to curb, no bucket:
2WD:
Brakes on 12 ft 2 in (3.70 m)
Brakes off 12 ft 10 in (3.91 m)
4WD – engaged:
Brakes on 11 ft 7 in (3.52 m)
Brakes off 13 ft 9 in (4.18 m)
4WD – disengaged:
Brakes on 12 ft 3 in (3.72 m)
Brakes off 12 ft 11 in (3.92 m)

570N EP 2 of 4
 L

B
K
A G

N O

E M

Line drawings are for illustrative purpose only and may not be exact representation of unit.

LOADER DIMENSIONS
19.5 L x 24.0 Tires 17.5 L x 24.0 Tires
A. Height to:
Top of canopy 9 ft 0 in (2.74 m) 8 ft 9 in (2.67 m)
Height to top of canopy – Low profile ROPS 8 ft 9 in (2.65 m) 8 ft 6 in (2.59 m)
Top of cab 9 ft 0 in (2.74 m) 8 ft 10 in (2.68 m)
Long Lip Bucket 4 IN 1® Bucket
B. Bucket hinge pin fully raised 11 ft 3 in (3.41 m) 11 ft 3 in (3.41 m)
C. Bucket hinge pin at SAE carry 1 ft 1 in (0.33 m) 1 ft 3 in (0.37 m)
D. Overall operating height – fully raised 13 ft 8 in (4.17 m) 14 ft 3 in (4.35 m)
E. Overall length with 3-point hitch 16 ft 11 in (5.15 m) 16 ft 9 in (5.09 m)
Width over tires:
11.0 L x 16.0 6 ft 8 in (2.02 m) 6 ft 8 in (2.02 m)
12.0 L x 16.5 6 ft 10 in (2.06 m) 6 ft 10 in (2.06 m)
19.5 L x 24.0 6 ft 10 in (2.07 m) 6 ft 10 in (2.07 m)
17.5 L x 24.0 6 ft 10 in (2.07 m) 6 ft 10 in (2.07 m)
F. Dump angle at full height 46° 45°
G. Dump clearance at full height, 45° dump:
Bucket 8 ft 8 in (2.63 m) 8 ft 11 in (2.71 m)
Clam open — 9 ft 8 in (2.93 m)
H. Dump reach at full height, 45° dump:
Bucket 2 ft 2 in (0.66 m) 2 ft 2 in (0.64 m)
Clam open — 11.9 in (0.3 m)
Bucket rollback:
J. at Groundline 40° 40°
K. at SAE carry 45° 45°
L. at Full height Adjustable Adjustable
M. Digging depth below grade:
Bucket flat 7.5 in (0.19 m) 6.8 in (0.17 m)
Clam open – dozing — 4.1 in (0.10 m)
Ground clearance at front axle 10.9 in (0.28 m) 10.9 in (0.28 m)
N. Wheelbase 7 ft 0 in (2.13 m) 7 ft 0 in (2.13 m)
O. Reach from front axle centerline – bucket on ground 6 ft 3 in (1.89 m) 6 ft 1 in (1.85 m)
Maximum clam opening — 3 ft 3 in (0.97 m)
Moldboard height — 3 ft 1 in (0.93 m)
Lift capacity to full height 6,503 lb (2 950 kg) 6,537 lb (2 965 kg)
Breakout force:
Lift cylinders 9,271 lb (41 239 N) 8,766 lb (38 993 N)
Dump cylinders 9,607 lb (42 734 N) 10,325 lb (45 928 N)
NOTE: L
 oader dimensions taken with 4WD, 19.5 L x 24.0 rear tires and 82 in (2.08 m) general purpose bucket except as noted.

570N EP 3 of 4
 STANDARD EQUIPMENT
OPERATOR ENVIRONMENT DRIVETRAIN HYDRAULICS
See page 1 Front axle, as selected: Gear pump:
2WD heavy-duty front axle with 28.5 gal/min @ 3,000 psi
ENGINE 11.0 L x 16.0 tires (108 L/min @ 207 bar)
4WD heavy-duty mechanically driven rear Heavy-duty hydraulic oil cooler
FPT 3.4 L diesel axle, with 12.0 L x 16.5 tires 7 micron, spin on oil filter
Cooled EGR Rear axle:
Diesel Oxidation Catalyst 2/4WD heavy-duty outboard planetary drive, LOADER
Full flow engine oil filter with 17.5 L x 24.0 tires
Air cleaner – replaceable dry type with 4F-4R Power Shuttle Bucket position indicator
radial seal Synchromesh transmission Lifting lugs on standard bucket
Radiator with de-aeration bottle Torque converter Single lever control,
Antifreeze to -34° F (-37° C) On-the-go electric 4WD control with Self-Leveling and Return-to-Dig
Foot throttle Electric F/R shuttle control Hand-operated clutch disconnects on
Self adjusting belt Electric differential lock control, loader and shift levers
Fuel filter with water trap with push-button activation; Located on Single lever 5-function loader control:
the loader control lever and side console Lift; Dump; Auxiliary function;
Park brake, spring-applied, hydraulic release Clutch cut-out; Differential-lock

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT TRACTOR LOADER
Manual Ride Control Chaff screen – dealer installed option Auxiliary hydraulics for
Comfort Steer Auxiliary work lights: loader-mounted equipment
ROPS and FOPS certified protective canopy: 2 front and 2 rear flood for tall Hydraulic front quick coupler
Short and standard height canopy and cab Mechanical front quick coupler
ROPS certified cab with heater, defroster, Canopy sun visor – tall canopy only Buckets – less teeth:
front and rear wipers and floor mat 440 lb (200 kg) front counterweight 82 in (2.08 m) general purpose Long Lip,
Cab Convenience Package containing: Hand throttle – electric with bolt-on cutting edge – includes lift eyes
Flip forward sun visor; Window washer – 500 lb (227 kg) counterweight, 82 in (2.08 m) general purpose Long Lip,
front and rear; Radio Ready kit, including bolted to hitch frame without bolt-on cutting edge –
wiring, speakers and DIN radio mounting; 5th spool auxiliary circuit for 3-point includes lift eyes
Deluxe Interior Package hitch valve 82 in (2.08 m) 4 IN 1®, includes 3 Bolt-on
Air-conditioning for cab models Tool portfolio of additional attachments cutting edges; Unit must be equipped
Mechanical suspension seat: 3-point hitch with 600 lb (272 kg) Plug in with auxiliary loader hydraulics
With armrests – 15° and 30° swivel to the counterweight – cannot be used with PTO 93 in (2.36 m) light duty loader bucket
right; Cloth or vinyl; Adjustable seat height, Loader linkage without loader bucket
Driveshaft guard
backrest angle; Lumbar and thigh support
3,000 lb (1 360 kg) rear counterweight
Wide seat belt – 3 in (75 mm)
Drawbar OTHER
Rear wheel weights 564 lb (256 kg)
ENGINE Tool box – bolt-on step-mounted
PTO:
Special paint
Cold Weather Starting Aid 540 RPM, hydrauliclly powered rear
PTO Ready. PTO hydraulic pump only, Spare tires
with dual 12 Volt batteries and glow plugs
no motor
Block heater
Master disconnect switch and remote
jump-start terminals

CaseCE.com
©2017 CNH Industrial America LLC. All rights reserved. CASE is a IMPORTANT: CASE Construction Equipment Inc. reserves the right CASE Construction Equipment is biodiesel-
trademark registered in the United States and many other countries, to change these specifications without notice and without incurring friendly. NOTE: All engines meet current EPA
owned by or licensed to CNH Industrial N.V., its subsidiaries or any obligation relating to such change. Availability of some models emissions regulations. All specifications are
affiliates. CNH Industrial Capital is a trademark in the United States and equipment builds vary according to the country in which the stated in accordance with SAE Standards or
and many other countries, owned by or licensed to CNH Industrial equipment is used. The illustrations and text may include optional Recommended Practices, where applicable.
N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% equipment and accessories and may not include all standard
Always read the Operator’s Manual before
post-consumer fiber. equipment. Your CASE dealer/distributor will be able to give you
operating any equipment. Inspect equipment
details of the products and their specifications available in your area.
before using it, and be sure it is operating
properly. Follow the product safety signs and
Form No. CCE201704570NEP use any safety features provided.
Replaces Form No. CCE201701570NEP

570N EP 4 of 4