is a division of ELETTROMEDIA 6201 Potenza Picena (MC) Italy - Tel.

+39 0733 870 870 - Fax +39 0733 870 880 - www.elettromedia.it 8

Connection... Interconnections to reveal every musical detail. Speaker cables, power cables and distribution accessories for the extreme current demands of your high power system. Connection was designed using only the best available materials. Audisons top level engineering teams most advanced technologies were employed to produce every single component. Three performance / price levels to satisfy the needs of any enthusiast, competitor or reference audiophile. When unparalleled quality and uncompromising reliability are not choices, they are requirements Connection from Audison The Power Transfer System.

Power & Ground Cable ................................................ Speaker Cable ........................................................... Signal Cable .............................................................. Audio Interconnect ...................................................... Video Interconnect ...................................................... Fuse ......................................................................... Fuse Holder................................................................ Fuse Distribution ......................................................... Distribution Block........................................................ Fuse & Distribution System ........................................... Battery Clamp ............................................................ Battery Terminal .......................................................... Ring Terminal ............................................................. Ground Terminal ......................................................... Main Crimp ................................................................ Heatshrink Sheath ...................................................... Superfarad ................................................................ Power Kit .................................................................. Amplifier Kit ............................................................... Technical Notes ..........................................................

02 04 08 09 14 15 16 18 19 20 22 24 25 26 27 27 28 30 31 32

Product Model Designation

Example: SFH 1 WP - Fuse Holder, Waterproof 1

FUSE HOLDER, WATERPROOF = Product description

The name usually consists of the above noted designations depending on the product type: Power Cable, Speaker Cable, Signal Cable, Interconnections and Accessories. Fuse Holders, Fuse Distribution and Distribution Systems do not include fuses.

Warranty
All the products in this price list are guaranteed according to the terms of law. Potentially defective products must be returned to an authorized Connection dealer for repair or replacement. Products damages due to misuse are not covered by this warranty.

Notes
Elettromedia is an ISO 9001:2000 certified company. All of its research and development activities are carried out in compliance with the reference norm. Elettromedia carries on an intense research and development process, aimed at the continued improvement of its products. Because of this philosophy, continuous adoption of new materials and technology may lead to product changes without notice. Technical features, aesthetics and prices of Elettromedia products may be different from the ones indicated in this price list. Elettromedia does not assume any responsibility for the direct or indirect damages due to eventual product modifications or changes.

MAINPOWER
MP 1/0BL MP 1/0S

MAINPOWER CABLES FOR INSTANTANEOUS HIGH CURRENT TRANSFER

SOFT TOUCHTM jacket to enhance the feel and flexibility BLUE & SILVER translucent matte finish jacket for enhanced cosmetics RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 6+1 STRAND MUL TIPLE TWIST TECHNOLOGY for instantaneous high current response , and to minimize eddy current power losses 30% MORE wire content than any competitor X3 FLEXIBLE for REFERENCE installations

29,00 29,00 18,70 18,70 10,80 10,80 5,20 5,20 0,73

MP PGI

MAINPOWER SERVICE

3 CONDUCTORS: 2 x 1 AWG power and ground conductors, 4 1x1 AWG remote turn-on wire 6 ALL IN ONE wire bundle for easy, time saving installation SOFT TOUCHTM jacket to enhance the feel and flexibility BLUE & SILVER translucent matte finish jacket for enhanced cosmetics RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 CONVENIENT for powering processors and accessories

3,10

Power & Ground Cable

POWER FLOW

PF 2BK

PF 2R

POWER FLOW CABLES FOR HIGH POWER TRANSFER

SOFT TOUCHTM jacket to enhance the feel and flexibility RED & BLACK translucent matte finish jacket for the look RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 SEVEN STRAND MUL TIPLE TWIST construction, for high power transfer and to reduce voltage losses X2 FLEXIBLE for COMPETITION installations

13,30 13,30 7,60 7,60 3,70 3,70 2,30 2,30

Power & Ground Cable

S 210

S 212 S 21 4

S SERIES REFERENCE AUDIOPHILE SPEAKER CABLES

SOFT TOUCHTM jacket to enhance the feel and flexibility BLUE & SILVER translucent matte finish jacket for enhanced cosmetics RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 TMTCTM TEXTILE MULTIPLE TWIST CONFIGURATION, 8 linear strands wound in a textile configuration. Hear a huge sound stage, pinpoint imaging and faithful reproduction of every inner nuance PRECIOUS METAL treated wire X3 FLEXIBLE for REFERENCE installations

8,60 5,70 3,30

Y-BOOT Translucent blue termination

For clean installations

5,00 4,90 4,80

Speaker Cable

ULTRA FLAT

UF 212

UF 21 4

UF 216

ULTRA FLAT SERIES COMPETITION GRADE SPEAKER CABLES

SILVER TRANSPARENT finish jacket ZERO GRIP JACKET for easy installation MULTIPLE BRAIDED WIRE TECHNOLOGY flat profile, easily concealed under carpet in , any tight location LARGE SURFACE for better power transfer X2 FLEXIBLE & FLAT for IMPOSSIBLE installations

4,80 3,00 1,93

SILVER
SL 212 SL 21 4

SILVER SERIES HIGH RESOLUTION, COMPETITION SPEAKER CABLES

SL 216

SOFT TOUCHTM jacket to enhance the feel SL 218 and flexibility SILVER translucent matte finish TWO OR FOUR conductors available RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 MULTIPLE TWIST WINDING CONFIGURA TION, seven silver finished strand construction for detailed musicality and high power transfer X3 FLEXIBLE for PROFESSIONAL installations

3,10 2,24 1,51 1,03

Speaker Cable

SILVER

SL 4 4 1

4,20

FLASH

FL 21 BL 4 FL 21 Y 4 FL 21 O 4

FLASH SERIES PROFESSIONAL SPEAKER CABLES

HIGHLY TRANSPARENT jacket to enhance look THREE COLOR CHOICES: blue, yellow or orange for flashy installations ZERO GRIP JACKET for easy installation MULTIPLE TWIST WINDING CONFIGURATION for enhanced music reproduction X 2 FLEXIBLE for HIGH VALUE installations

2,05 2,05 2,05

Speaker Cable

FT

FT 21 4 FT 216

FT SERIES PROFESSIONAL SPEAKER CABLES

CLEAR, HIGHLY TRANSPARENT jacket to enhance look ZERO GRIP JACKET for easy installation MULTIPLE TWIST WINDING CONFIGURATION for enhanced music reproduction X2 FLEXIBLE for HIGH VALUE installations

1,75 1,15

BASIC1

B 18

BASIC1 SERIES HIGH VALUE SPEAKER CABLES

CLEAR / BLUE HIGHLY TRANSPARENT jacket to enhance look ZERO GRIP JACKET for easy installation MULTIPLE WIRE WINDING configuration for improved music reproduction X1 FLEXIBLE for STANDARD installations

0,73

Speaker Cable

SB

SB 20

SB REFERENCE AUDIOPHILE SIGNAL CABLE (SPOOL)

STEREO BALANCED OR UNBALANCED: it can be used in either configuration BRAIDED TRUE SILVER COATED outer shield for increased noise rejection 1 0% TWISTED MYLAR AND ALUMINIUM shield rejects RFI and EMI 1 POLYAMIDE POLYMER protective inner jacket for true silver coated conductors WTPTM Winding T wisted Pair balanced conductors reject low frequency electromagnetic fields aiding in noise rejection DDWTM Double Drain Wire system to drain electrostatic fields. No noise THE ULTIMATE signal cable for REFERENCE installations

12,70

Signal Cable

ST2

ST SERIES HIGH RESOLUTION AUDIOPHILE SIGNAL CABLES

DURA-TEXTM outer jacket for protection and to enhance the feel and flexibility SOFT TOUCHTM outer jacket makes for an extremely flexible cable 1 0% TWISTED MYLAR AND ALUMINIUM shield rejects RFI and EMI 1 TEXTILE COTTON INTERNAL FIBERS protect silver finished conductors DDWTM Double Drain Wire system to drain electrostatic fields. No noise WTPTM Winding Twisted Pair balanced conductors reject low frequency electromagnetic fields aiding in noise rejection OVER 80 dB noise rejection PLA TINUM SA TIN machined ABSTM style connector for a strong long lasting connection TUG-PROOF sealed internal connection for maximum reliability DIE-CAST Y BLOCK for full protection of the conductors in the critical split point REFERENCE GRADE performance

29,00 33,00 52,00 70,00 79,00

ST Y ADAPTER
STF 030

27,00 27,00

Audio Interconnect

BT2
BT SERIES HIGH EFFICIENCY SIGNAL CABLES
2-4-6 CHANNELS available SOFT TOUCHTM translucent, matte blue jacket makes for an extremely flexible cable POLYAMIDE POLYMER outer jacket protects inner conductors WTPTM Winding T wisted Pair balanced conductors reject low frequency electro-magnetic fields aiding in noise rejection OVER 60 dB noise rejection C H R O M E S AT I N A B S T M s t y l e machined metal contacts TUG-PROOF sealed internal connection for maximum reliability MOLDED Y BLOCK for protection of the conductors in the critical split point COMPETITION GRADE performance

13,00 14,00 15,00 16,00 17,90 18,80

BT4

28,00 31,00 32,00

10

Audio Interconnect

BT6

42,00 45,00

BT Y ADAPTER
BTF 030

9,90 9,90

1 1

Audio Interconnect

FT2
FT SERIES HIGH VALUE SIGNAL CABLES
HIGHLY TRANSPARENT clear outer jacket for enhanced cosmetics BALANCED twisted pair, silver finished conductors enhance noise rejection 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability RIGHT ANGLE CONNECTOR on one end to aid in tough installations TUG-PROOF sealed internal connection for maximum reliability PROFESSIONAL GRADE performance

5,60 6,60 7,50 8,40 9,00 10,00

FT Y ADAPTER
FTF 030

MOLDED Y BLOCK for protection of the conductors in the critical split point

4,10 4,10

12

Audio Interconnect

FS2
FS SERIES HIGH VALUE SIGNAL CABLES
SOFT TOUCHTM translucent, matte blue jacket makes for a flexible cable UCSTM LOW NOISE SHIELD for improved noise rejection 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability TUG-PROOF sealed internal connection for maximum reliability EXTENDED REMOTE TURN-ON WIRE to power up connected components VALUE GRADE performance

4,70 5,60 7,50 8,40

FS Y ADAPTER
FSF 030

MOLDED Y BLOCK for protection of the conductors in the critical split point

3,90 3,90

13

Audio Interconnect

BV1
SGIDTM Special Gas Injected Dielectric 75 Ohm constant impedance SOFT TOUCHTM outer jacket Braided true silver coated outer shield for increased noise rejection Silver coated central conductors for improved frequency response CHROME SATIN machined metal contacts Injection molded compact body for reliable performance

23,00 27,00 31,00

1 4

Video Interconnect

SFA
PLATINUM SATIN AFS fuse for use on all Connection fuse systems CONVENIENT transparent casing for easy condition verification CONNECTION monogram molded into casing for great cosmetics 15 A thru 300 A values available

4,70 4,70 4,70 4,70 4,70 4,70 4,70 4,70 4,70

15

Fuse

SFH

SFH 1 1WP

COMPLETELY WATERPROOF POLYCARBONATE CRYSTALS casing 4 AWG thru 1/0 AWG inputs for any current demand SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire AFS FUSE 1 A thru 300 A available 5

35,00

BFH
POLYCARBONATE CRYSTALS casing, strong and scratch resistant 4 AWG thru 1 AWG inputs for any current demand /0 SMB TM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands AFS FUSE 1 A thru 300 A available 5

BFH 1 1

27,00

16

Fuse Holder

FFH
FFH 14 Mini ANL line
POLYCARBONA TE casing, strong and scratch resistant 4 AWG inputs for high current demand C H R O M E S AT I N f i n i s h f o r e n h a n c e d cosmetics AFS FUSE 1 A thru 300 A available 5

FFH 1 4

9,00

17

Fuse Holder

FFH Mini-ANL BFD line

POLYCARBONATE line FFH 14 Mini ANL CRYSTALS casing, strong and scratch resistant 4 AWG thru 1/0 casing, inputs and scratch POLYCARBONA TE AWG strong for any current demand resistant SMB TM solid machined brass construction for better current transfer CHROME SATIN finish current demand 4 AWG inputs for high for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire SMBTM solid machined brass construction RECESSED inset cable collar for protection against stray wire strands for better current transfer TWO AND FOUR POSITION AFS 15 A thru 300 A fused outputs available CHROME SA TIN finish for enhanced cosmetics AFS FUSE 1 A thru 300 A available 5

28,00

BFD 21

BFD 4 1

39,00

18

Fuse Distribution Fuse Holders

FFH Mini-ANLBDB line

FFH 14 Mini ANL casing, strong and scratch resistant POLYCARBONATE line 8 AWG thru 1/0 casing, inputs and scratch POLYCARBONA TE AWG strong for any current demand resistant SMB TM solid machined brass construction for better current transfer CHROME SATIN finish current demand 4 AWG inputs for high for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire SMBTM solid machined brass construction RECESSED inset cable collar for protection against stray wire strands for better current transfer TWO CONVENIENT for enhanced cosmetics 1 CHROME SA TIN finish SIZES: 5 positions and 1 positions AFS FUSE 1 A thru 300 A available 5

26,00

BDB 51

BDB 1 1 1

36,00

FDB
POLYCARBONATE casing, strong and scratch resistant 8 AWG thru 4 AWG inputs for high current demand SMBTM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics RECESSED inset cable collar for protection against stray wire strands

9,00

19

Distribution Block Fuse Holders

SFD
UNIQUE ONE PIECE fuse and ground system for clean, reliable installations P O LYCA R B O N AT E c a s i n g , strong and scratch resistant 1/0 AWG on both fused and ground input, 1/0 AWG pass thru on fused block SMBTM solid machined brass c o n s t ru c t i o n fo r b e t t e r current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands MOLDED CABLE REST keeps wires safe and nicely laid out 1 2 AWG and 3 4 AWG on both AFS fused and ground outputs

SFD 4 1C

66,00

20

Fuse & Distribution System

BFH & BDB System

P R O P R I E TA RY M O D U L A R fu s e a n d g ro u n d distribution system ADD-ON distribution capability grows with your system upgrades EXTENSION LINKS provided with each BFH 1 4, BDB 24 and BDB 44 POLYCARBONATE casing, strong and scratch resistant 4 AWG input and output on both AFS fused and ground modules SMB TM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands

BFH 1 4

11,80

17,90

BDB 44

BDB 24

11,00

21

Fuse & Distribution System

SBC
POLYCARBONATE CRYSTALS casing, strong and scratch resistant SEPARATE POSITIVE AND NEGATIVE post designs for better fit WRAP AROUND clamp design for a tight, reliable connection SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands

19,80 19,80

BBC
UNIQUE AFS FUSED POSITIVE post battery clamp, 1 A thru 300 A available 5 POLYCARBONATE CRYSTALS casing, strong and scratch resistant WRAP AROUND clamp design for a tight, reliable connection SMBTM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands

BBC 4 1P

26,00

22

Battery Clamp

FBC
POLYCARBONATE casing, strong and scratch resistant SEPARATE POSITIVE AND NEGATIVE post designs for better fit WRAP AROUND clamp design for a tight, reliable connection RING TERMINAL connection and 2 8 AWG outputs for flexible system design SMB TM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics

10,80 10,80

23

Battery Clamp

FBT
EXTENSION POST for side post batteries SHORT AND LONG designs for maximum flexibility SRT AND FRT RING TERMINALS are a perfect companion CHROME SATIN finish for enhanced cosmetics

4,70

5,00

24

Battery T erminal

SRT
REFERENCE ring terminal with stylized Connection sheath 1/0 AWG, 2 AWG and 4 AWG input sizes available SMBTM solid machined brass construction for better current transfer RECESSED inset cable collar for protection against stray wire strands TRANSLUCENT connector boot with Connection monogram included PLATINUM SATIN finish for unparalleled cosmetic appeal

16,90 17,90 19,80

FRT LINE
CRIMP OR SOLDER TYPE ring terminal 2, 4, 8 and 1 AWG input sizes available 0 BLUE & SILVER connector jackets for safety and cosmetic appeal included CHROME SATIN finish for enhanced cosmetics

3,60 3,70 5,30 6,00

25

Ring T erminal

SGT
LARGE FOOTPRINT for better ground on high power systems 1/0 AWG input for high current systems SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish with Connection monogram

SGT 1 1

7,50

BGT
LARGE FOOTPRINT for better ground on high power systems 2 AWG input for high current systems SMBTM solid machined brass construction for better current transfer CHROME SATIN finish with Connection monogram

BGT 21

6,60

26

Ground T erminal

SMC
THE ULTIMATE cable termination 1/0, 2, 4, 8 and 10 AWG sizes available PROVIDES unparalleled contact between cable and chosen connector MORE contact area = MORE current transfer = MORE POWER PREVENTS stray wire strands shorting out for safety and reliability SILVER FINISHED copper construction

4,70 4,70 4,70 4,70 4,70

RADIA TED FLAME-PROOF POL YOLEFIN RESISTANT to high temperature conditions APPLIED HEAT provides a suction effect around the wrapped connection point PROVIDES PROTECTION for terminated wires assuring s a f e t y a n d re l i a b i l i t y

2,70 2,70 2,70 2,70

27

Heatshrink Sheath

SHS

Main Crimp

BSF
20 VOLT DESIGN for high current capability X 3 - LO W E S R fo r b e t t e r current transfer < 1,5 m WIDE TEMPERATURE RANGE for constant performance ANTI-VIBRATION DESIGN for improved reliability ELECTROLYTE RESERVE for long lasting capability Tolerance 2%

BSF 1 3

BSF 1 3

80,00 115,00

28

Superfarad

BCA
CAPACITOR DISTRIBUTION for power and ground SMBTM solid machined brass construction for better current transfer H I G H C U R R E N T L O W R E S I S TA N C E connection for better current transfer UPGRADE WITH BCA DGT digital voltage read out for BCA 32 S I M P L I F I E D I N S TA L L AT I O N M A X I M U M PERFORMANCE

BCA 32

30,00

35,00

BCA DGT

BCA 1 4

17,00

29

Superfarad

FPK
Installation Kit for the proper power hook-up of a single amplifier up to 300 or 600 watts
5 , 2 m /17 f t . t ra n s p a re n t b l u e power cable FFH fuse holder AFS fuse included 1 m/3.3 ft. transparent silver ground cable 5,2 m/1 ft. 1 AWG blue remote 7 8 turn-on cable 1 m/5 ft. of split loom ,5 All required ring and fork terminals included Cable ties, split loom and snap grommet included

45,00 29,00

30

Power Kit

FSK
Installation Kit for the complete proper hook-up of a single amplifier up to 300 watts
5,2 m/17 ft. transparent blue power cable FFH fuse holder 60 A AFS fuse included 1 m/3.3 ft. transparent silver ground cable 5,2 m/17 ft. 1 AWG blue remote turn-on cable 8 10 m/33 ft. FT 216, 16 AWG speaker cable 5 m/16.5 ft. FT2 500 audio interconnect 1,5 m/5 ft. of split loom All required ring and fork terminals included Cable ties, split loom and snap grommet included

42,00

31

Amplifier Kit

SISTEMA CONNECTION PER MOBILE MULTIMEDIA

Technical Notes
10137010

32/33