O-Ring –Abmesssungen

Nach ASA 568

O-Ring Sizes Acorrding to
ASA 568

Schnurstarke Ø d2 = 1,7 mm, Abmessungen nach ASA 568

Cord Thickness Ø d2 = 1,7 mm, measure according to ASA 568
ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm)
0011) 0,74 011 7,65 021 23,52 031 44,17 041 75,92
0022) 1,07 012 9,25 022 25,12 032 47,35 042 82,27
0033) 1,42 013 10,82 023 26,70 033 50,52 043 88,62
004 1,78 014 12,42 024 28,30 034 53,70 044 94,97
005 2,57 015 14,00 025 29,87 035 56,87 045 101,32
006 2,90 016 15,60 026 31,47 036 60,05 046 107,67
007 3,68 017 17,17 027 33,05 037 63,22 047 114,02
008 4,47 018 18,77 028 34,65 038 66,40 048 120,37
009 5,28 019 20,35 029 37,82 039 69,57 049 126,72
010 6,07 020 21,95 030 41,00 040 72,75 050 133,07

1)
Schnurstarke Ø d2 = 1,02 mm
Cord Thickness Ø d2 = 1,02 mm
2)
Schnurstarke Ø d2 = 1,27 mm
Cord Thickness Ø d2 = 1,27 mm
3
) Schnurstarke Ø d2 = 1,.52 mm
Cord Thickness Ø d2 = 1,52 mm

Schnurstarke Ø d2 = 3.5 mm, Abmessungen nach ASA 568

Cord thickness Ø d2 = 3.5 mm, Measures according to ASA 568
ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm)
201 4,34 218 31,34 235 78,97 252 132,94 269 221,84
202 5,94 219 32,92 236 82,14 253 136,12 270 228,19
203 7,52 220 34,52 237 85,32 254 139,29 271 234,54
204 9,12 221 36,09 238 88,49 255 142,47 272 240,89
205 10,69 222 37,69 239 91,67 256 145,64 273 247,24
206 12,29 223 40,87 240 94,84 257 148,82 274 253,59
207 13,87 224 44,04 241 98,02 258 151,99 275 268,29
208 15,47 225 47,22 242 101,19 259 158,34 276 278,99
209 17,04 226 50,39 243 104,37 260 164,69 277 291,69
210 18,64 227 53,57 244 107,54 261 171,04 278 304,39
211 20,22 228 56,74 245 110,72 262 177,39 279 329,79
212 21,82 229 59,92 246 113,89 263 183,74 280 355,19
213 23,39 230 63,09 247 117,07 264 190,09 281 380,59
214 24,99 231 66,27 248 120,24 265 196,44 282 405,25
215 26,57 232 69,44 249 123,42 266 202,79 283 430,66
216 28,17 233 72,62 250 126,59 267 209,14 284 456,06
217 29,74 234 75,79 251 129,77 268 215,49

Schnurstarke Ø d2 = 2.5 mm, Abmessungen nach ASA 568

Cord thickness Ø d2 = 2.5 mm, Measures according to ASA 568
ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm)
102 1,.24 118 21,89 134 47,29 150 72,69 166 171,12
103 2,06 119 23,47 135 48,90 151 75,87 167 177,47
104 2,84 120 25,07 136 50,47 152 82,22 168 183,82
105 3,63 121 26,64 137 52,07 153 88,57 169 190,17
106 4,42 122 28,24 138 53,64 154 94,92 170 196,52
107 5,23 123 29,82 139 55,25 155 101,27 171 202,87
108 6,02 124 31,42 140 56,82 156 107,62 172 209,22
109 7,59 125 32,99 141 58,42 157 113,97 173 215,57
110 9,19 126 34,59 142 59,99 158 120,32 174 221,92
111 10,77 127 36,17 143 61,60 159 126,67 175 228,27
112 12,37 128 37,77 144 63,17 160 133,02 176 234,62
113 13,94 129 39,34 145 64,77 161 139,37 177 240,97
114 15,54 130 40,94 146 66,34 162 145,72 178 247,32
115 17,12 131 42,52 147 67,95 163 152,07
116 18,72 132 44,12 148 69,52 164 158,42
117 20,29 133 45,69 149 71,12 165 164,77

Schnurstarke Ø d2 = 5,33 mm, Abmessungen nach ASA 568

Cord thickness Ø d2 = 5,33 mm, Measures according to ASA 568
ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm)
309 10,46 327 43,82 345 100,97 363 164,47 381 304,17
310 12,07 328 46,99 346 104,14 364 170,82 382 329,57
311 13,64 329 50,17 347 107,32 365 177,17 383 354,97
312 15,24 330 53,34 348 110,49 366 183, 52 384 380,37
313 16,81 331 56,52 349 113,67 367 189,87 385 405,26
314 18,62 332 59,69 350 116,84 368 196,22 386 430,66
315 19,99 333 62,87 351 120,02 369 202,57 387 456,06
316 21,59 334 66,04 352 123,19 370 208,92 388 481,41
317 23,16 335 69,22 353 126,37 371 215,27 389 506,81
318 24,77 336 72,39 354 129,54 372 221,62 390 532,21
319 26,34 337 75,57 355 132,72 373 227,97 391 557,61
320 27,94 338 78,74 356 135,89 374 234,32 392 582,68
321 29,51 339 81,92 357 139,07 375 240,67 393 608,08
322 31,12 340 85,09 358 142,24 376 247,02 394 633,48
323 32,69 341 88,27 359 145,42 377 253,37 395 658,88
324 34,29 342 91,44 360 148,59 378 266,07
325 37,47 343 64,62 361 151,77 379 278,77
326 40,64 344 97,79 362 158,12 380 291,47

Schnurstarke Ø d2 = 6,99 mm, Abmessungen nach ASA 568

Cord thickness Ø d2 = 6,99 mm, Measures according to ASA 568
ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm) ASA 568 Ø d1 (mm)
425 113,67 436 148,59 447 227,97 458 367,67 469 506,86
426 116,84 437 151,77 448 240,67 459 380,37 470 532,26
427 120,02 438 158,12 449 253,37 460 393,07 471 557,66
428 123,19 439 164,47 450 266,07 461 405,26 472 582,68
429 126,37 440 170,82 451 278,77 462 417,96 473 608,08
430 129,54 441 177,17 452 297,47 463 430,66 474 633,48
431 132,72 442 183,52 453 304,17 464 443,36 475 658,88
432 135,89 443 189,87 454 316,07 465 456,06
433 139,07 444 196,22 455 329,57 466 468,76
434 142,24 445 202,57 456 342,27 467 481,48
435 145,42 446 215,27 457 354,97 468 494,16

Unsere O-Ringe sind in Our O-Ring are available

Standard abmessungen in In standard dimensions in the
Den Werkstoffen NBR und Material NBR and FPM.
FPM lieferbar. Andere Other materials (see p.8-9)
Werkstoffe (siehe S.8-9) On demand.
Auf Anfrage

Übergrößen bis ,zu einem Oversizes up to a diameter of

Durchmesser von 8 metern 8 meters are supplied without
Liefern wir ohne Stoßvulka- Vulcanization butt seam or
Nisations- oder Klebenaht Pasted seam

The O-Rings are available in standard metric sizes (cross sections are in 0.5 millimeter and inside diameters are
in 1 millimeter increments) and in standard inch sizes. The inche sizes is the Aerospace Standard 568 published
by the Society of Automotive Engineers. The inch sizes are designated by dash number as shown on the size
chart AS568 or AS568A. AS568 or AS 568 was used to be called ARP568. For instance, an O-Rings with an
inside diameter of (I.D.) of .239+.005 and a cross section (w) of .070 + .003 is designated as AS568 - 010 or -
010.

Almost any size O-Ring can be made: Request for Quotation

All available sizes: O-Ring Sizes
 Nominal Size Actual Size in Inches Actual in Millimeter

AS568 ID OD CS Inside Cross Inside Cross Section

Diameter Section Diameter
-001 1/32 3/32 1/32 .029±.004 .040±.003 0.74±0.10 1.02±0.08
-002 3/64 9/64 3/64 .042±.004 .050±.003 1.07±0.10 1.27±0.08
-003 1/16 3/16 1/16 .056±.004 .060±.003 1.42±0.10 1.52±0.08
-004 5/64 13/64 1/16 .070±.005 .070±.003 1.78±0.13 1.78±0.08
-005 3/32 7/32 1/16 .101±.005 .070±.003 2.57±0.13 1.78±0.08
-006 1/8 1/4 1/16 .114±.005 .070±.003 2.90±0.13 1.78±0.08
-007 5/32 9/32 1/16 .145±.005 .070±.003 3.68±0.13 1.78±0.08
-008 3/16 5/16 1/16 .176±.005 .070±.003 4.47±0.13 1.78±0.08
-009 7/32 11/32 1/16 .208±.005 .070±.003 5.28±0.13 1.78±0.08
-010 1/4 3/8 1/16 .239±.005 .070±.003 6.07±0.13 1.78±0.08

-011 5/16 7/16 1/16 .301±.005 .070±.003 7.65±0.13 1.78±0.08

-012 3/8 1/2 1/16 .364±.005 .070±.003 9.25±0.13 1.78±0.08
-013 7/16 9/16 1/16 .426±.005 .070±.003 10.82±0.13 1.78±0.08
-014 1/2 5/8 1/16 .489±.005 .070±.003 12.42±0.13 1.78±0.08
-015 9/16 11/16 1/16 .551±.007 .070±.003 14.00±0.18 1.78±0.08
-016 5/8 3/4 1/16 .614±.009 .070±.003 15.60±0.23 1.78±0.08
-017 11/16 13/16 1/16 .676±.009 .070±.003 17.17±0.23 1.78±0.08
-018 3/4 7/8 1/16 .739±.009 .070±.003 18.77±0.23 1.78±0.08
-019 13/16 15/16 1/16 .801±.009 .070±.003 20.35±0.23 1.78±0.08
-020 7/8 1 1/16 .864±.009 .070±.003 21.95±0.23 1.78±0.08

-021 15/16 1-1/16 1/16 .926±.009 .070±.003 23.52±0.23 1.78±0.08

-022 1 1-1/8 1/16 .989±.010 .070±.003 25.12±0.25 1.78±0.08
-023 1-1/16 1-3/16 1/16 1.051±.010 .070±.003 26.70±0.25 1.78±0.08
-024 1-1/8 1-1/4 1/16 1.114±.010 .070±.003 28.30±0.25 1.78±0.08
-025 1-3/16 1-5/16 1/16 1.176±.011 .070±.003 29.87±0.28 1.78±0.08
-026 1-1/4 1-3/8 1/16 1.239±.011 .070±.003 31.47±0.28 1.78±0.08
-027 1-5/16 1-7/16 1/16 1.301±.011 .070±.003 33.05±0.28 1.78±0.08
-028 1-3/8 1-1/2 1/16 1.364±.013 .070±.003 34.65±0.33 1.78±0.08
-029 1-1/2 1-5/8 1/16 1.489±.013 .070±.003 37.82±0.33 1.78±0.08
-030 1-5/8 1-3/4 1/16 1.614±.013 .070±.003 41.00±0.33 1.78±0.08

-031 1-3/4 1-7/8 1/16 1.739±.015 .070±.003 44.17±0.38 1.78±0.08

-032 1-7/8 2 1/16 1.864±.015 .070±.003 47.35±0.38 1.78±0.08
-033 2 2-1/8 1/16 1.989±.018 .070±.003 50.52±0.46 1.78±0.08
-034 2-1/8 2-1/4 1/16 2.114±.018 .070±.003 53.70±0.46 1.78±0.08
-035 2-1/4 2-3/8 1/16 2.239±.018 .070±.003 56.87±0.46 1.78±0.08
-036 2-3/8 2-1/2 1/16 2.364±.018 .070±.003 60.05±0.46 1.78±0.08
-037 2-1/2 2-5/8 1/16 2.489±.018 .070±.003 63.22±0.46 1.78±0.08
-038 2-5/8 2-3/4 1/16 2.614±.020 .070±.003 66.40±0.51 1.78±0.08
-039 2-3/4 2-7/8 1/16 2.739±.020 .070±.003 69.57±0.51 1.78±0.08
-040 2-7/8 3 1/16 2.864±.020 .070±.003 72.75±0.51 1.78±0.08

-041 3 3-1/8 1/16 2.989±.024 .070±.003 75.92±0.61 1.78±0.08

-042 3-1/4 3-3/8 1/16 3.239±.024 .070±.003 82.27±0.61 1.78±0.08
-043 3-1/2 3-5/8 1/16 3.489±.024 .070±.003 88.62±0.61 1.78±0.08
-044 3-3/4 3-7/8 1/16 3.739±.027 .070±.003 94.97±0.69 1.78±0.08
-045 4 4-1/8 1/16 3.989±.027 .070±.003 101.32±0.69 1.78±0.08
-046 4-1/4 4-3/8 1/16 4.239±.030 .070±.003 107.67±0.76 1.78±0.08
-047 4-1/2 4-5/8 1/16 4.489±.030 .070±.003 114.02±0.76 1.78±0.08
-048 4-3/4 4-7/8 1/16 4.739±.030 .070±.003 120.37±0.76 1.78±0.08
-049 5 5-1/8 1/16 4.989±.037 .070±.003 126.72±0.94 1.78±0.08
-050 5-1/4 5-3/8 1/16 5.239±.037 .070±.003 133.07±0.94 1.78±0.08

-102 1/16 1/4 3/32 .049±.005 .103±.003 1.24±0.13 2.62±0.08

-103 3/32 9/32 3/32 .081±.005 .103±.003 2.06±0.13 2.62±0.08
-104 1/8 5/16 3/32 .112±.005 .103±.003 2.84±0.13 2.62±0.08
-105 5/32 11/32 3/32 .143±.005 .103±.003 3.63±0.13 2.62±0.08
-106 3/16 3/8 3/32 .174±.005 .103±.003 4.42±0.13 2.62±0.08
-107 7/32 13/32 3/32 .206±.005 .103±.003 5.23±0.13 2.62±0.08
-108 1/4 7/16 3/32 .237±.005 .103±.003 6.02±0.13 2.62±0.08
-109 5/16 1/2 3/32 .299±.005 .103±.003 7.59±0.13 2.62±0.08
-110 3/8 9/16 3/32 .362±.005 .103±.003 9.19±0.13 2.62±0.08

-111 7/16 5/8 3/32 .424±.005 .103±.003 10.77±0.13 2.62±0.08

-112 1/2 11/16 3/32 .487±.005 .103±.003 12.37±0.13 2.62±0.08
-113 9/16 3/4 3/32 .549±.007 .103±.003 13.94±0.18 2.62±0.08
-114 5/8 13/16 3/32 .612±.009 .103±.003 15.54±0.23 2.62±0.08
-115 11/16 7/8 3/32 .674±.009 .103±.003 17.12±0.23 2.62±0.08
-116 3/4 15/16 3/32 .737±.009 .103±.003 18.72±0.23 2.62±0.08
-117 13/16 1 3/32 .799±.010 .103±.003 20.30±0.25 2.62±0.08
-118 7/8 1-1/16 3/32 .862±.010 .103±.003 21.89±0.25 2.62±0.08
-119 15/16 1-1/8 3/32 .924±.010 .103±.003 23.47±0.25 2.62±0.08
-120 1 1-3/16 3/32 .987±.010 .103±.003 25.07±0.25 2.62±0.08

-121 1-1/16 1-1/4 3/32 1.049±.010 .103±.003 26.64±0.25 2.62±0.08

-122 1-1/8 1-5/16 3/32 1.112±.010 .103±.003 28.24±0.25 2.62±0.08
-123 1-3/16 1-3/8 3/32 1.174±.012 .103±.003 29.82±0.30 2.62±0.08
-124 1-1/4 1-7/16 3/32 1.237±.012 .103±.003 31.42±0.30 2.62±0.08
-125 1-5/16 1-1/2 3/32 1.299±.012 .103±.003 32.99±0.30 2.62±0.08
-126 1-3/8 1-9/16 3/32 1.362±.012 .103±.003 34.59±0.30 2.62±0.08