NONIDAC 11P 30-70
Technical Data Sheet No. 4700 – March 2020
Product Description
NONIDAC 11P 30-70 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide,
diluted with 30 weight% water. It is manufactured in Terranova dei Passerini (Lodi, Italy) plant.
The chemical structure is the following:
R - CH2 - O - (CH2 - CH - O)n -H
R = C10H21 (mixture of linear and mono-branched)
CAS registry no. 127036-24-2
EINECS no. 603-182-5
Sales Specification
Property Test Method Unit Guaranteed Value1
√ Appearance at 25°C Visual - Clear liquid
√ Colour RCM 3668 APHA 50
√ Hydroxyl number (+) RCM 3851 mg KOH / g 36,0 – 40,0
√ pH (5%) (+) RCM 3645 - 5,0 – 7,0
√ Dry matter RCM 3644 % mass 69,0 – 71,0
√ value reported on inspection certificate.
1 specification No. 1386 rev. 1 of January 19th, 2010.
(+) for 100% active substance
Additional Properties
Property Test Method Unit Typical Value
Pour point ASTM D 97 °C 3
Viscosity at 25°C ASTM D7042 cSt 670
Density at 25°C ASTM D7042 kg/m3 1.077
Flash point ASTM D 93 °C not measurable as
aqueous solution
RCM are Sasol Italy analytical methods, internal or referred to international standard. Additional information available upon request.
Page 1 of 2
NONIDAC 11P 30-70
Technical Data Sheet No. 4700 – March 2020
Main Applications
NONIDAC 11P 30-70 is used as non-ionic emulsifier in emulsion polymerization to produce stable latexes of
styrene/acrylate, VAM (vinyl acetate monomer) and copolymers.
NONIDAC 11P 30-70 is used alone or in combination with other surfactant like ANIODAC 11P 7-27 or
DACLOR 27-20-23.
Handling and Storage
NONIDAC 11P 30-70 should be stored preferably in stainless steel.
It is suggested to keep the product at temperature below 40°C, it is preferable to avoid heating above 60°C
and to store under nitrogen in order to minimise yellowish phenomena.
NONIDAC 11P 30-70 is clear liquid at room temperature and up to 15°C, at lower temperature turbidity and
settling can occur. In case this happens, the entire amount of NONIDAC 11P 30-70 should be melted at
temperature about 50°C and homogenized before use.
NONIDAC 11P 30-70 does not contain any preservative. NONIDAC 11P 30-70 is not susceptible to microbial
growth because of low water content.
Shelf-life is 36 months from production date for product in its original and sealed packaging.
Packaging
NONIDAC 11P 30-70 is generally supplied in plastic drums, details on available packaging can be obtained
from sales department.
Data regarding safety, transport classes, toxicology and biodegradability of the product can be obtained from
the corresponding material safety data sheet.
Sasol Italy S.p.A.
Headquarters Technical Customer Support
Viale Forlanini, 23 Via E. Mattei, 4
20134 Milano, Italy 26827 Terranova dei Passerini (LO), Italy
Phone +39-02 58453 1 Phone +39-0377 463 1
Fax +39-02 58453 285 Fax +39-0377 463 226
Sasol is a registered trademark of Sasol Ltd. Product trademarks displayed in this document are the property of the Sasol Group of
companies, except where it is clear from the context that not. Users of this document are not permitted to use these trademarks without
the prior written consent of their proprietor. All rights not expressly granted are reserved. Reference to trademarks used by other
companies is neither a recommendation, nor should it give the impression that products of other companies cannot be used.
The information contained in this document is based on Sasol’s knowledge and experience at the time of its creation. We reserve the
right to make any changes to this document or the products described therein, as a result of technological progress or developments.
This information implies no liability or other legal responsibility on our part, including with regard to existing third-party patent rights. In
particular, no guarantee or warranty of properties in the legal sense is implied. The customer is not exempted from the obligation to
conduct careful inspection and testing of incoming products. All our business transactions are governed exclusively by our General
Business Terms.
Page 2 of 2
