Scribd
Upload
971 views1 page

Spread Sheet Bucket Elevator

This document contains specifications for a bucket elevator, including: 1) Operating conditions such as the material conveyed, capacity, mode of operation, and mechanical details like bucket speed and angle of incline. 2) Mechanical data such as the type and dimensions of the casing, belt carrier and buckets, sizes of the head and tail pulleys, and locations of the inlet and discharge chutes. 3) Drive data covering the motor specifications, reduction ratio, and insulation details.

Uploaded by

Bayu Pramana Putra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
971 views1 page

Spread Sheet Bucket Elevator

This document contains specifications for a bucket elevator, including: 1) Operating conditions such as the material conveyed, capacity, mode of operation, and mechanical details like bucket speed and angle of incline. 2) Mechanical data such as the type and dimensions of the casing, belt carrier and buckets, sizes of the head and tail pulleys, and locations of the inlet and discharge chutes. 3) Drive data covering the motor specifications, reduction ratio, and insulation details.

Uploaded by

Bayu Pramana Putra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROCESS DESIGN SECTION CORPORATE ENGINEERING

BUCKET ELEVATOR DATA SHEET OPERATION CONDITIONS

MATERIAL CONVEYED PRODUCT DESCRIPTION BULK DENSITY SCREEN ANALYSIS PRODUK TEMP

MOISTURE CONTENT CAPACITY :TON/HR MODE OF OPERATION BUCKET SPEED ANGLE OF INCLINE INSTALATION MECHANICAL DATA

Wgt% normal

max

TYPE DISTANCE BETWEEN HEAD & TAIL SHAFTS

BELT CARRIER FOR BUCKETS WIDTH WT. OF DUCK NO. OF PLIES COVER THIKNESS

CASING- CROSS SECTION DIMENTIONS CASING GAUGE CASING HD.SECT.-GAUGE DICSH. OPENING BOOT-

TYPE OF BELT SPLICE HEAD PULLEY DIA TAIL PULLEY DIA TYPE GAUGE LOADING OPENING HEAD SHAFT DIA TYPE OF BEARINGS HEAD OF SHAFT SPEED TYPE OF TAKE UP TYPE HEAD SHAFT SPROCKET P.D TAIL SHAFT P.D LOCATIONS INLET CHUTE ANGLE DISCH. CUTE ANGLE INCHES INCHES INLET OPENING W/LOADING LEG FEED HOPPER FACE WIDTH FACE WIDTH TAIL SHAFT DIA

RPM

CHAIN CARRIER FOR BUCKETS

SIZE OF BUCKET BUCKET SPACING BUCKET BOLTS-TYPE NO. PER BUCKET CASING HEAD SECTION BOOTBUCKET HEAD & TAIL SHAFTS HEAD & TAIL SHAFTS BEARINGS BELT & COVER HEAD & TAIL PULLEYS MOTOR DRIVE DATA ITEM NO HP FRAME MPG TYPE ENCLOURE VOLTS/PHASE/CYCLE BEARINGS FULL LOAD AMPS

MATERIAL OF CONSTRUCTION CHAIN HEAD & TAIL SPROCKETS TAKE -UP DEVICE BUCKET BOLTS BUCKET FILLER PIECES GASKETS JOINST DOOR & MANWA YS MTD RPM LR AMPS REDUCTION TYPE MPG TYPE DRIVE MOTOR COUPLING MFG

RATIO

INSUL

LUBE S.F

You might also like