ROSHAN THISARA 4C87-200M-3005-E10K-000X-X640-0800-4049-233A-**** (*) Windows XP 6.1 IA32 WinAspi: NT-SPTI used Nero Version: 7.9.6.

4 Internal Version: 7, 9, 6, 4 (Nero Express) Recorder: <HL-DT-ST DVD-RAM GSA-H54N>Version: 1.00 - HA 1 TA 0 - 7.9 .6.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-RAM GSA-H54N>Version: 1.00 - HA 1 TA 0 - 7.9 .6.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === HL-DT-ST DVD-RAM GSA-H54N E: ======================= CdRom0

AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047032kB) Free physical memory: 746MB (764152kB) Memory in use : 27 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.12.2011 ===== Disc-Copy over image - 1st step : Copy to image ... 7:38:27 7:38:27 7:38:27 . . #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL . . #2 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

. . #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1728352 NWA Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 7:38:27

-1 (gap

0)

. . #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 1728352 = 1728352, TRM_DATA_MODE1, block size 2048, rea d opt 0 (no read options) 7:38:27 . . #5 Text 0 File Burncd.cpp, Line 3508

Turn on Disc-At-Once, using DVD media 7:38:27 . . #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1728351 (384:04.51, 3375MB) . . #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) . . #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= . . #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1728352 (1728352) = #1728352/384:4.52 not relocatable, disc pos for caching/writing not required/not requi

7:38:27 7:38:27

7:38:27

red -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 17 28352 blocks [Image Recorder] -------------------------------------------------------------7:38:27 . . #10 Text 0 File ThreadedTransferInterface.cpp, Line Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 3539664896, ISRC "" DAO layout: =========== ___Start_ ____Track_ _Idx_ _CtrlAdr_ _____Size_ ______NWA_ _____ 0 lead-in 0 0x41 0 0 0 1 0 0x41 0 0 0 1 1 0x41 1728352 1728352 1728352 lead-out 1 0x41 0 0 7:38:27 7:38:27 7:38:27 995

Idx 1 0

_RecDep_____ 0x00 0x00 0x00 0x00

. . #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) . . #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning

. . #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patc h infos, orig at #0): write at #0 7:38:27 7:42:58 . . #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400

. . #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 1728352 (1A5F60h), length 0 blocks

7:42:58 7:42:59 7:43:07 7:43:07

. . #16 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully . . #17 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME . . #18 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL . . #19 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed

===== Disc-Copy over image - 2nd step : Burn the image ... 7:43:07 7:43:09 . . #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL . . #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3539664896 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Users\ROSHAN THISARA\Documents\TempImage.nrg> . . #3 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media . . #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1728351 (384:04.51, 3375MB) . . #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) . . #6 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: HL-DT-ST DVD-RAM GSA-H54N, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision nu Disc Application Code: 0, Extended Information Indicators: 7 7:43:44 . . #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R /RW, DVD R DL, DVD-RAM.) 7:43:44 . . #8 Text 0 File ThreadedTransferInterface.cpp, Line 793

7:43:09 7:43:44

7:43:44 7:43:44 mber: 1

Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1728352 (1728352) = #1728352/384:4.52 not relocatable, disc pos for caching/writing not required/not requi red -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 17 28352 blocks [E: HL-DT-ST DVD-RAM GSA-H54N] -------------------------------------------------------------. . #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: HL-DT-ST DVD-RAM GSA-H54N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3539664896, ISRC "" DAO layout: =========== ___Start_ ____Track_ _Idx_ _CtrlAdr_ _____Size_ ______NWA_ _RecDep_____ _____ 0 lead-in 0 0x41 0 0 0x00 0 1 0 0x41 0 0 0x00 0 1 1 0x41 1728352 0 0x00 1728352 lead-out 1 0x41 0 0 0x00 7:43:44 7:43:44 7:43:44 7:43:44 . . #10 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME . . #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) . . #12 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 7:43:44

. . #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patc h infos, orig at #0): write at #0 7:43:44 . . #14 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer T ype: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 419 3920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1

Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 8 23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 . 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 . 7:43:44 . . #15 Text 0 File DVDR.cpp, Line 6553 Drive: HL-DT-ST DVD-RAM GSA-H54N Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 . . #16 CDR -1207 File DVDR.cpp, Line 6477 Book Type automatically set to: DVD-ROM . . #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x062f1f80: Len x648 . . #18 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes . . #19 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 ............... #T7..Pk..c..... ...MBIPG101R05.

7:43:44 7:43:44

7:43:44

7:43:44 7:50:47

. . #20 Text 0 File WriterStatus.cpp, Line 113 <E: HL-DT-ST DVD-RAM GSA-H54N> start writing Lead-Out at LBA 1728352 (1A 5F60h), length 0 blocks 7:51:26 7:51:26 7:51:29 7:51:35 7:51:37 . . #21 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 1728352 . . #22 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 8x (11,080 KB/s) . . #23 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME . . #24 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed . . #25 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon