Honeywell Connected Life Safety Services

CLSS Pathway
Cellular and IP Communicator
HW-AV-LTE-M

Installation and Operation Manual

P/N:LS10340-000HW-E | REV. A | SEP/30/2021

ECN: 00004957
 Table of Contents
Section 1: General Information ......................................................................................................................................................................... 4
1.1: About This Manual.............................................................................................................................................................................................................4
1.2: Information Sources .........................................................................................................................................................................................................4
1.2.1: Training Modules ..................................................................................................................................................................................................4
1.2.2: Related Documents .............................................................................................................................................................................................4
1.3: Documentation Feedback..............................................................................................................................................................................................5
1.4: Revision History ..................................................................................................................................................................................................................5
1.5: Agency Listings and Approvals....................................................................................................................................................................................6
1.6: Limited Liability ..................................................................................................................................................................................................................6
1.7: Manufacturer Warranty...................................................................................................................................................................................................6
1.8: Safety Instructions.............................................................................................................................................................................................................7
1.9: Technical Support..............................................................................................................................................................................................................7
1.10: Disclaimer ..........................................................................................................................................................................................................................7
Section 2: Overview............................................................................................................................................................................................... 8
2.1: Operational Modes............................................................................................................................................................................................................8
2.1.1: Working with a Central Monitoring Station...............................................................................................................................................8
2.2: Main Features......................................................................................................................................................................................................................8
2.3: Specifications ......................................................................................................................................................................................................................9
2.4: CLSS Pathway Parts...................................................................................................................................................................................................... 10
Section 3: Security Recommendations .........................................................................................................................................................11
3.1: For Users ............................................................................................................................................................................................................................ 11
3.2: Potential Risks ................................................................................................................................................................................................................. 11
Unauthorized Access ........................................................................................................................................................................................... 11
Memory Media........................................................................................................................................................................................................ 11
Software and Firmware Updates .................................................................................................................................................................... 11
Viruses and Other Malicious Software Agents.......................................................................................................................................... 12
Network and Firewall Setup .............................................................................................................................................................................. 12
Securing the Monitoring Stations.................................................................................................................................................................. 13
Section 4: Central Station Communications ...............................................................................................................................................14
4.1: Prerequisites..................................................................................................................................................................................................................... 14
4.2: Receiving a CLSS Account for Your Organization ........................................................................................................................................... 14
4.3: Assigning the Device to a Customer...................................................................................................................................................................... 14
4.4: Configuring the Central Station Alerting............................................................................................................................................................. 15
Section 5: Mounting and Wiring .....................................................................................................................................................................16
5.1: Prerequisites..................................................................................................................................................................................................................... 16
5.2: Programming the Connected Panel...................................................................................................................................................................... 16
5.3: Before Mounting ............................................................................................................................................................................................................ 16
5.4: Important........................................................................................................................................................................................................................... 16
5.5: To Mount the Communicator ................................................................................................................................................................................... 17
5.6: Installing the Antenna.................................................................................................................................................................................................. 17
5.6.1: To Connect the Antenna................................................................................................................................................................................ 18
5.7: Wiring the Communicator.......................................................................................................................................................................................... 18
5.7.1: Wiring for Dialer Capture............................................................................................................................................................................... 18
To Wire the Panel with the Communicator ................................................................................................................................................ 19
5.8: Powering ON .................................................................................................................................................................................................................... 19
5.8.1: Wiring for Dry Contact Relay Outputs ..................................................................................................................................................... 20
To Wire for the Dry Contact Relay Outputs ................................................................................................................................................ 20
5.8.2: Powering ON ....................................................................................................................................................................................................... 21
5.9: Activating the Central Station Communication ............................................................................................................................................... 21
5.10: For Dual-path Communications .......................................................................................................................................................................... 21
5.11: Verifying the Communications ............................................................................................................................................................................. 21

2
 Table of Contents

5.12: Cellular Signal Strength........................................................................................................................................................................................... 22

5.12.1: Improving the Signal Quality.................................................................................................................................................................... 22
Section 6: Troubleshooting...............................................................................................................................................................................23
 Section 1: General Information

1.1 About This Manual

This CLSS Pathway Installation and Operation Manual provides detailed procedures about
installation, commissioning, and troubleshooting the CLSS Pathway communicator.
The manual describes:
• the CLSS Pathway communicator,
• its installation environment,
• mounting and connecting the device
• initial configurations, and
• troubleshooting
Using This Manual
This manual is written with the understanding that the user is trained in the operations
and services required for this product.
Honeywell reserves the right to modify and revise this manual without notice.
Usages
In this manual, product name usages are as below:
• The CLSS Pathway may also be referred as the communicator
• The Connected Life Safety Services mobile App may also be referred as the CLSS App

1.2 Information Sources

Honeywell offers suitable information sources based on informational requirements.

1.2.1 Training Modules

Training modules are available when logged onto:
https://fire.honeywell.com/#/help-videos

1.2.2 Related Documents

The table below lists documents related with the CLSS Pathway:
Product Type: CLSS Pathway
For This Purpose ... Refer to ...
Install and wire the CLSS Pathway - Product Installation Document
CLSS Pathway inside P/N: LS10338-000HW-E
an enclosure
Quickly install and CLSS Pathway - Quick Start Guide
configure for the P/N: LS10339-000HW-E
central station
communication
Use various CLSS Pathway - Installation and Operation Manual (This document)
installation and P/N: LS10340-000HW-E
configuration options

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 4
General Information Documentation Feedback

1.3 Documentation Feedback

Your feedback helps us keep our documentation up-to-date and accurate. If you have any
comments or suggestions about our Online Help or printed documents, you can email us.
Please include the following information:
• Product name and version number (if applicable)
• Printed document or Online Help
• Topic title (for Online Help)
• Page number (for printed document)
• A brief description of content you think should be improved or corrected
• Your suggestion for how to correct/improve documentation
Send email messages to:
FireSystem.TechPubs@Honeywell.com
Please note this email address is for documentation feedback only. If you have any
technical issues, please contact Honeywell Technical Services.

1.4 Revision History

Table 1.1: Dates and Changes

Date Change Details

Rev. A
September 30, 2021 First release of the document.

5 CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021
Agency Listings and Approvals General Information

1.5 Agency Listings and Approvals

These listings and approvals apply only to the module specified in this document. In some
cases, listing may be in process.

UL
ETL No. 5013005, conforms to following UL standards:
• UL864 – Control Units and Accessories for Fire Alarm Systems

FCC Statements (USA)

This equipment complies with FCC rules Part 15, FCC registration No. XMR201707BG96
and operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received

1.6 Limited Liability

The user agrees that despite the Device could reduce the risk of fire, or other dangers, it
does not guarantee against such events. Honeywell will not take any responsibility
regarding personal, property or revenue loss while using the Device. Honeywell
responsibility according to local laws does not exceed the value of the purchased system.
Honeywell is not affiliated with GSM operators providing cellular services, therefore is not
responsible for network services, coverage, or its operation.

1.7 Manufacturer Warranty

The Device carries a non-transferable hardware limited warranty by the manufacturer. This
warranty does not cover any postal or labor costs for the removal and re-installation of the
Device. This warranty does not cover any subscriber agreements or failure of services
provided under the terms of such subscriber agreements, or failure of cellular, GPRS, LAN or
other related networks functions and services.
The warranty is not valid if the device has been modified or used in a manner contrary to its
intended purpose and does not cover damage to the Device caused by installation or
removal of the Device or any of its components. This warranty is voided if the Device has
been damaged by improper maintenance, SIM card removal, accident or unreasonable use,
negligence, acts of God, neglect, improper service, or other causes not arising out of defect
in materials or construction. This warranty does not cover the elimination of externally
generated static or noise, or the correction of antenna problems or weak signal reception,
damage to software, accessories or alarm system external components, cosmetic damage
or damage due to negligence, misuse, abuse, failure to follow operating instructions,
accidental spills or customer applied cleaners, damage due to environmental causes such
as floods, airborne fallout, chemicals, salt, hail, windstorms, moisture, lightning or extreme
temperatures, damage due to fire, theft, loss or vandalism, damage due to improper storage
and connection to equipment of another manufacturer, modification of existing equipment,
faulty installation or short circuit.
Honeywell will not be liable in any event of incidental, special or consequential damages
(including loss of profits), and the Client shall have no claim against Honeywell for
termination of contracts, indemnification, compensation for loss of customers, loss of
profits, prospective profits, distribution rights, market share, goodwill, investments made or
any similar losses that may result from any faults in the operation of the Device and the
services provided by Honeywell.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 6
General Information Safety Instructions

1.8 Safety Instructions

• A qualified technician must check this device, once a year.
• The HW-AV-LTE-M device contains a radio transceiver operating in LTE CAT-M1 band.
• Do not use the Device with medical devices, in places or where it could interfere with
other devices and cause any potential danger.
• Do not expose the Device to high humidity, chemical environment, or mechanical
impacts.
• Do not use the Device in hazardous environment. Do not store or install the Device in
overheated, dusty, wet or overcooled places.
• The Device is mounted in limited access areas. Any system repairs must be done only
by qualified, safety aware personnel. Do not disassemble or refit the Device. Do not
attempt to personally repair it.
• Main power must be disconnected before any installation or tuning work starts. The
device installation or maintenance must not be done during stormy conditions.
• The device must be powered by DC 12-29V power supply.
• Blown fuses or any other components of the Device must not be replaced by the user.
• Keep the Device dry. Any liquid, i.e., rain, moisture, may destroy or damage the inside
circuitry.
• Handle carefully. Do not vibrate or shake it violently.
• Do not clean it with chemicals or detergent.
• Please read the user manual carefully before installation and operation of the Device.
Otherwise, it may not work properly or be damaged.

1.9 Technical Support

For support in the USA contact Honeywell Technical Support at:
• Email: CLSS.Tech@honeywell.com
• Website: fire.honeywell.com
• Address:
Honeywell International Inc.

12 Clintonville Rd.

Northford, CT 06472

(203)-484-7161

1.10 Disclaimer
Images in the document are for reference purpose only and are subject to change. All
trademarks, service marks, word marks, design marks, and logos are property of their
respective owners.

7 CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021
 Section 2: Overview
The CLSS Pathway (HW-AV-LTE-M) is a dual-path cellular communicator, which runs on
a 24-volt power from its panel. It supports both AT&T and Verizon LTE networks, and uses
any of them with a stronger signal. It transmits Contact ID data from its fire panel to the
panel’s central monitoring station.

2.1 Operational Modes

The communicator can operate in one of the following mode:
• Dialer Capture Mode: Gets contact ID data from the panel’s dialer interface.
With the panel: Connects to the telephone ports.

• Dry Contact Relay Monitor Mode: Monitors the dry contact relay outputs.
With the panel: Connects to the dry contact relay terminals.

2.1.1 Working with a Central Monitoring Station

In a sole-path connection, it uses the default cellular connection only.
The communicator has dual-SIMs to support AT&T and Verizon cellular connections.
Between these two, the cellular connection with stronger signal strength takes care of the
data transmissions.
In a dual-path connection, it can use both cellular as well as LAN connections. The LAN
will be the primary communication path and the cellular connection will be the backup
connection.

2.2 Main Features

• Universal Panel Compatibility
- Dial capture interface supporting the Contact ID
• Exceptional Redundancy
- Dual-SIM device
• Connection monitoring
– Adjustable fault reporting time
• High reliability due to multiple transmission channels
- LTE CAT-M1/LAN and redundant servers
• The CLSS Site Manager
- Web-based application for device configurations, administration, and
remote firmware updates
• The Connected Life Safety Services App
– Supports alarm, events, and email notifications
• Can use sole path (Cellular only) or dual path (Cellular as well as LAN)
• Optional four inputs for monitoring Fire Alarm Panel dry contact relays
• 24V auxiliary constant power directly from the panel

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 8
Specifications Overview

2.3 Specifications
Table 2.1: CLSS Pathway Specifications

Operational Requirements
Supply Voltage +12V to +29V DC
Current Standby: 60mA
Peak: 200mA
Frequency LTE CAT-M1 700/850/1700/1900/2100 MHz
GSM Providers AT&T, Verizon, or other networks available in the area
Physical Characteristics
Dimensions 2.48” x 3.54” x 1.26”
Weight 2.56 oz without antenna
Room Conditions
Temperature 0°C to 49°C (32°F to 120°F)
Relative humidity 1% to 85% | Non-condensing

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 9
CLSS Pathway Parts Overview

2.4 CLSS Pathway Parts

Part Name Part Number
CLSS Pathway HW-AV-LTE-M

Enclosure with mounting plate HW-AV-ENC

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 10
 Section 3: Security Recommendations
3.1 For Users
An administrator should:
• Regularly review the user roles and permissions for a CLSS account
• Immediately remove users who should no longer have access to CLSS
A technician should:
• Use discretion to allow or deny a location access request.
• Disconnect the CLSS App from the CLSS Gateway, once the required activity is
completed.
• Turn OFF the location access in the CLSS App's Security Settings, when location
access is not required.

3.2 Potential Risks

Security threats applicable to networked systems include unauthorized access,
communication snooping, viruses, and other malicious software agents.
Unauthorized Access
Unauthorized access results from unsecured user name and password, uncontrolled
access to the equipment, or uncontrolled and unsecured access to the network.
It results the following:
• Loss of system availability
• Incorrect execution of controls causing damage to the equipment
• Incorrect operation, spurious alarms, or both
• Theft or damage to the contents of the system
• Capture and modification or deletion of data causing possible liability to the
installation Site and Honeywell
 User Access and Passwords
Observe the following good practices:
• Ensure physical security of passwords. Avoid writing user names and passwords
where they can be seen by unauthorized personnel.
• Ensure that passwords contain characters, numbers, and a mix of lower and
uppercase letters.
• Passwords should be complex and not easily guessed; and, should not contain
phrases used in common speech.
• Do not use personally identifiable information as a password, such as social security
numbers, addresses, birth dates.
• Set the minimum level of access for each user.
• Do not provide users with privileges that they do not need.
• Periodically audit user accounts and remove any that are no longer required.
Memory Media
• Use only authorized removable media.
• Use an up-to-date anti-virus software to scan the removable media and check for
viruses and malware.
• Ensure that the memory media is not used for other purposes to avoid risk of
infection.
• Control access to media containing backups to avoid risk of tampering.
Software and Firmware Updates
System software and firmware updates may be offered from time to time.
Ensure that your local representative:
• Has the up-to-date contact details, and
• Periodically visits the Honeywell web site for up-to-date product information

CLSS Gateway - Installation and Users’ Manual | P/N:LS10248-000HW-E | REV. E | SEP/30/2021 11

Potential Risks Security Recommendations

Viruses and Other Malicious Software Agents

Malicious Software include the following:
• Viruses
• Spyware
• Worms
• Trojans
These may be present in a computer using a Monitoring Station Software or in a USB pen
drive, which is used to copy data to computer.
The intrusion of malicious software agents can result in performance degradation, loss of
system availability, and the capture, modification, or deletion of data — including
configuration and device logs.
USB devices from other infected systems on the network or malicious Internet sites can
also transfer viruses.
Network and Firewall Setup
Inbound (In) Port: The port another computer uses to access a gateway functionality. An
application on the gateway will be actively listening on this port for client connections.
Outbound (Out) Port: The gateway uses outbound ports to connect to Internet or CLSS
Site Manager. The Cloud services in the CLSS Site Manager will be listening on these
ports waiting for a connection from the gateway.
By default, block all inbound and outbound connections and allow only the ports listed in
the below table:
Port Number Type IN/OUT Purpose/Remarks
443 HTTPS - TCP Bidirectional NOC APIs communications with a Supplier
Cloud and CLSS Site Manager
1433 TCP Bidirectional NOC Server and SQL DB private network-based
communications
9000 TCP Bidirectional Pathway devices and NOC communications
9000 UDP Bidirectional Pathway devices and NOC heartbeat
communications
6000 - 6030 TCP Bidirectional Monitoring station and NOC communications
The CLSS Pathway device sends alarms to CLSS Site Manager, using the below endpoints:
Region All End-points
West US • https://fireclssnocwus.honeywell.com/clssnocalarmrcvr/
• https://fireclssnocwus.honeywell.com/clssnocapisrv/
East US • https://fireclssnoceus.honeywell.com/clssnocalarmrcvr/
• https://fireclssnoceus.honeywell.com/clssnocapisrv/

CLSS Gateway - Installation and Users’ Manual | P/N:LS10248-000HW-E | REV. E | SEP/30/2021 12

Potential Risks Security Recommendations

Securing the Monitoring Stations

• Good security practices should be observed on the Monitoring Station PCs.
• Operating systems and software should be kept up to date by installing the
manufacturers updates, as well as maintaining up-to-date anti-virus software on all
computers, which may be connected directly or via a network.
• For monitoring stations, it is recommended to use secure VPN channel, which must
be placed behind the firewall.
• It is suggested to use hardware receiver as an adapter at the monitoring station.
• For the CLSS Pathway devices, it is recommended to use secure private network, and
keep them behind the firewall.
• Only authorized personnel should get access to private network.
• Best industry standards should be followed while configuring the firewall policies.
• Devices should be safely installed in the secure zone and they must be out of reach to
unauthorized personnel.
• Ensure that the computers are regularly scanned for viruses.
• Only install files and software from trusted sources and use only them on associated
computers to avoid malicious software.
• Use only authorized removable media. For example, use CD, DVD, external hard drives,
or USB memory sticks, which have been scanned using up-to-date anti-virus
software.

CLSS Gateway - Installation and Users’ Manual | P/N:LS10248-000HW-E | REV. E | SEP/30/2021 13

 Section 4: Central Station Communications
As per the settings in CLSS Site Manager and CLSS App, the CLSS Pathway sends events
from a panel to a specified Central Monitoring Station.

4.1 Prerequisites
1. The organization’s administrator configuring CLSS Site Manager requires a CLSS
account
2. A technician installing the CLSS Pathway requires a CLSS account
3. The CLSS Site Manager should already have details of the Customer, Site, and
Building
4. Central station details such as its account number, DNIS number, and prefix number
should be available
5. Serial number and the configuration key of the CLSS Pathway. (Available on the Quick
Start Guide.)

4.2 Receiving a CLSS Account for Your Organization

Configuring the CLSS Pathway requires a CLSS account. If you already have the CLSS
account, then proceed to section 4.3, "Assigning the Device to a Customer".
If You Do Not Yet Have a CLSS Account. Your organization's Administrator* should visit
fire.honeywell.com or scan the QR code below for instructions to request a CLSS Account:

* That Administrator is someone who can sign on behalf of the organization.

Using the CLSS account received, the Administrator should add customers and
employees in CLSS Site Manager. Refer to the help section of CLSS Site Manager for more
information.

4.3 Assigning the Device to a Customer

Associate your device with a CLSS Site and Building for your Customer.
1. Log into the CLSS mobile App.
2. Tap the three dots at the top-right corner of the dashboard
3. Tap Install Dialer Capture.
4. Follow the on-screen instructions.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 14
Configuring the Central Station Alerting Central Station Communications

4.4 Configuring the Central Station Alerting

A. Add a Central Station to Your CLSS Account The organization’s Administrator should
do this one-time task for each central station associated with the panel.
1. Log onto CLSS Site Manager: fire.honeywell.com
2. Click your profile icon at the top-right corner and select External Accounts.
3. Click ADD NEW at the Central Stations section in the External Accounts page.
4. Follow the on-screen instructions.

B. Assign a Central Station Account to the Device Provide the central station account
details associated with the specific site.
1. Log onto CLSS Site Manager: fire.honeywell.com
2. Navigate to the Customer > Site, where the device is installed.
3. Click the Feature Activation icon at the bottom of the left sidebar.
4. Click the CLSS Pathway section at the left.
5. Click on your CLSS Pathway communicator in the list.
6. Click Configure Central Station Alerting in the details view.
7. Follow the on-screen instructions.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 15
 Section 5: Mounting and Wiring
Mounting the communicator should take place within a UL-listed Honeywell enclosure,
such as HW-AV-ENC.

NOTE: For UL installations, the communicator must be mechanically secured to a UL-

listed enclosure, such as a UL-listed junction box.

5.1 Prerequisites
1. Know whether to install CLSS Pathway for dialer capture or for panel relay monitoring
2. Know whether to install the CLSS Pathway for dialer capture with LAN (dual-path
communications) or without LAN (sole path)
3. The panel should be programmed to support the CLSS Pathway

5.2 Programming the Connected Panel

Program according to the panel’s programming document.
• Enabling the PSTN dialer of the panel
• Selecting the DTMF mode (for tone dialing)
• Selecting the Contact ID communication format
• Providing any telephone number for dialing. Ex: 999999
• Entering the 4-digit account number
NOTE: If the panel has two central stations at two locations, program each account
identically.

5.3 Before Mounting

• Inform the central monitoring station to put your CLSS Account on test.
• If installing on an existing operational panel, inform the operator and the local
authority that the panel will be a temporarily out of service.
• Ensure that the panel is powered down.

5.4 Important
• Check that you have the communicator, 3-ft antenna, and the Quick Start Guide from
the carton box.
• Only a regulated UL-listed UOJZ, UTOU, or NBSX control panel or power supply
should power the communicator.
• The communicator must be connected to a UL-listed control panel with power limited
circuits.
• For UL installations, secure the communicator to a UL-listed enclosure, such as a UL-
listed junction box.
• Install the communicator only at a dry indoor location.
• The location and wiring methods must be in accordance with the National Electrical
code, ANSI/NFPA 70.
• Install in accordance with the National Fire Alarm and Signaling Code, NFPA 72.
• Mount the communicator inside an enclosure, for example HW-AV-ENC, as shown in
Figure 5.1 below.
• Enclosure should be close nipple to the fire alarm control panel.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 16
To Mount the Communicator Mounting and Wiring

5.5 To Mount the Communicator

1. In the Quick Start Guide, locate the installation sticker at the bottom right of the last
page.
2. Check that the sticker has the serial number and the configuration key to program the
communicator.
3. Place the sticker on the inside lid of the enclosure for programming steps and for
future reference.
4. Mount the enclosure box on the wall next to the fire panel using the wall mounting
holes.
5. If using the HW-AV-ENC enclosure, mount it onto the two mounting holes as in
Figure 5.1 and secure it with the hardware supplied with the enclosure.
6. For other enclosures, use the communicator box’ mounting flanges as a template to
drill holes for appropriate sized mounting hardware. (Not supplied).
7. Slide the box onto the mounting studs and secure with the hex nuts provided in the
enclosure kit.

5.6 Installing the Antenna

The antenna comes with an SMA connector, which provides easy connection with the
communicator.
IMPORTANT
• Do not use a damaged antenna with the communicator. Replace the damaged
antenna immediately.
• Use only a manufacturer approved antenna. Non-approved antennas or modifications
could impair service quality, damage the device, and violate FCC regulations.
• A location below the ground level or a metal structure may impact the network
coverage.
• The antenna should be positioned perpendicularly to the ground, either right side up
or upside down.
• Keep the antenna away from any sources interfering with or blocking the RF signal.
For example, a metal object may shield the cellular radio RF signal.
• The antenna should be at least 7.8" (20 cm) away from people.
• The antenna must not be co-located or operating with any other antenna or
transmitter.
• Ensure that the panel supplies 24V DC power from its constant power output.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 17
Wiring the Communicator Mounting and Wiring

5.6.1 To Connect the Antenna

1. Route the antenna cable through the small rubber grommet located on the top left
side of the enclosure.
2. Attach the magnet at the bottom of the antenna onto the top wall of the enclosure.
3. Locate the antenna connector on top of the communicator.
4. Thread the antenna cable end onto the antenna connector and tighten.
5. Loop the excess cable length inside the enclosure.

Figure 5.1: CLSS Pathway Inside the Enclosure

5.7 Wiring the Communicator

You can wire the communicator either for capturing dialer data from a panel’s dialer
interface or for monitoring dry contact relay outputs.

5.7.1 Wiring for Dialer Capture

For dialer capture, you connect both telephone dialer ports of the fire panel with the
communicator. If a dual-path connection is needed, connect the LAN port of the CLSS
Pathway with the customer's network router.
Preparations
• For panel dialer ports with 8-pin RJ type connectors, use an RJ45 connector with the
other end as a pigtail.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 18
Powering ON Mounting and Wiring

• Use only the Pin 4 wire, which is typically Blue with White stripe, for RING connection.
• Use only the Pin 5 wire, which is typically solid Blue, for TIP connection.
• Cut all other wires.
• Enclosure should be close nipple to the fire alarm control panel.
• All wirings must be within a conduit.
• The terminal strips can accommodate solid or stranded wires with sizes from 14 to 22
AWG.

To Wire the Panel with the Communicator

Panel’s Terminal Panel’s Connector Connections at CLSS Pathway

AUX + Connect to +
GND - Connect to -
PRIMARY DIALER RING Connect to RING
TIP Connect to TIP
BACKUP DIALER RING2 Connect to RING2
TIP2 Connect to TIP2

CAUTION: DO NOT USE RESETTABLE POWER TERMINALS.

!

5.8 Powering ON
1. Power ON the communicator and the panel.
2. Ensure that the panel and the communicator are receiving power.
3. Ensure that the Green LED on the communicator is continuously ON indicating
successful connections.

Figure 5.2: Wiring for Dialer Capture

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 19
Powering ON Mounting and Wiring

5.8.1 Wiring for Dry Contact Relay Outputs

The communicator can be wired to monitor dry contact relay outputs. This wiring is done
without connecting to a dialer interface.

CAUTION: ALL WIRING MUST BE WITHIN A CONDUIT.

!

CAUTION: DO NOT USE RESETTABLE POWER TERMINALS.

!

To Wire for the Dry Contact Relay Outputs

1. Install a 10K resistor between the communicator ground and its each input.
2. Connect the panel relay terminals and the communicator as in the Figure 5.3.
3. Ensure that the connections are as in the below table:
Panel’s Terminal Connections at CLSS Pathway
AUX Connect to AUX +
GND Connect to GND
Trouble Relay Output Connect to the IN1 port
Fire Alarm Relay Output Connect to the IN2 port
Supervision Alarm Relay Connect to the IN3 port
Water Flow Relay Output Connect to the IN4 port

Figure 5.3: Wiring for Dry Contact Relay Monitoring

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 20
Activating the Central Station Communication Mounting and Wiring

5.8.2 Powering ON
1. Power ON the communicator and the panel.
2. Ensure that the panel and the communicator are receiving power.
3. Ensure that the Green LED on the communicator is continuously ON indicating
successful connections.

NOTE: Refer to the Section 6: "Troubleshooting" if there is an issue and resolve it.

5.9 Activating the Central Station Communication

CAUTION: BEFORE ACTIVATING THE CENTRAL STATION COMMUNICATION, CHECK ALL THE CONNECTIONS.
!
When the CLSS Pathway receives its first event from its panel, it registers itself with CLSS
Site Manager and the central monitoring station, and then becomes active.
The panel event appearing on CLSS Site Manager confirms that the communicator is
activated. You can create a test event on the panel to perform this one-time activation.
Tip! You can now check connection results such as the signal strength in the CLSS App.

5.10 For Dual-path Communications

1. Connect the LAN port of the communicator to the customer’s network.
2. Observe that the Yellow LED for network connectivity is flashing to indicate a live
Ethernet connection.

5.11 Verifying the Communications

The RJ45 connector LEDs should have the following states:

Yellow LED RJ45

Indication
Connector
The LED is Constantly ON Connected with good signal
Green LED RJ45
Indication
Connector
The LED is Blinking Cable connection and communication with the router are good.

NOTE: Refer to the Section 6: "Troubleshooting" if there is an issue and resolve it.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 21
Cellular Signal Strength Mounting and Wiring

5.12 Cellular Signal Strength

Once the CLSS Pathway is activated, you can check the signal strength shown on the
activation screen in the CLSS App.

NOTE: The signal bar shown is in the RSSI (Received Signal Strength Indicator) rating
format. The signal bar is not in the dBm rating!

Signal Bar Signal Strength Rating

1 1 to 9
2 10 to 15
3 16 to 23
4 24 to 31

5.12.1 Improving the Signal Quality

Honeywell recommends that the signal strength rating should be 5 or above for a
consistent good connection.
If the signal rating is lower than 5, reposition the antenna, and monitor the signal
strength bars in the CLSS App.
If required, contact Honeywell Technical Support.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 22
 Section 6: Troubleshooting

CONNECTION TROUBLES
Resolved Status Indication: The Communicator LED starts flashing. Continuous ON indicates
a good connection.
LED Status Possible Cause(s) Corrective Action(s)
OFF The communicator is not connected to Ensure that the wirings are as per
the panel. the wiring diagrams.
The panel is not supplying power. Measure the AUX output of the
panel.
The communicator device is damaged. Replace with an undamaged
communicator.
Flashing Slow Trying to establish connection. Reposition the antenna.
No cellular signal available.
Flashing every Low signal connectivity Reposition the antenna.
5 seconds

LAN NETWORK TROUBLES

Resolved Status Indication: The RJ45 connector’s flashing LED indicates data transfer.
Continuous ON indicates a good connection with the panel and router.
LED Status Possible Cause(s) Corrective Action(s)
Yellow LED
OFF The LAN cable is not plugged into the Ensure that the wirings are as per
communicator. the wiring diagrams.
Measure the AUX output of the
panel.
Replace with an undamaged
communicator.
Green LED
OFF The router is not providing an IP via Check your DHCP server settings, if
DHCP. DHCP is in use.
There is no Internet access. Use another device in the same
network and check your router
settings.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 23
 Troubleshooting

EVENT TROUBLES
Resolved Status Indication: The RJ45 connector’s flashing LED indicates data transfer. The
Connected Life Safety Services App as well as CLSS Site Manager start receiving events.
Trouble Corrective Action(s)
If no events are received 1. Verify the RING and TIP connections.
 Ensure that the RING and TIP terminals are connected to a
TELCO ring and tip and not to the R-1/T-1 terminals.
 Ensure that there is no connection trouble.
2. Then, check for communication failure error messages at
the panel and fix the error, if any.
3. Disable the Wait for Dial Tone options in the panel.
Cellular connectivity issues 1. Go to the Device Registration screen in the CLSS App.
2. Ensure that the signal strength shown on it is at least one to
two bars.
3. Reposition the antenna for higher signal strength.

CLSS Pathway - Installation and Operation Manual | P/N: LS10340-000HW-E | REV. A | SEP/30/2021 24
12 Clintonville Rd 140 Waterside Rd
Northford, CT 06472 Leicester LE5 1TN, UK

(203) 484-7161 +44 (0) 203 4091779