Lighting
Luma gen2 Solar
VGP703 40 4S 730 24V III DM10 42/60S
VGP703 | LUMA GEN2 MINI SOLAR, 1, LED, Distribution medium
10, Glass, 155° x 86°, Side-entry for diameter 42 to 60 mm
Meet your sustainability targets in an easy and fast way. we upgraded your most
preferred luminaire Luma gen2 to be powered by Solar energy. Finless design,
future-proof architecture, hustle-free maintenance and best in class lighting
performance are some of the reasons we are proud of Luma gen2 Solar. Let’s take a
deep dive in all the characteristics we worked on to meet your lighting needs.
Product data
General Information Operating and Electrical
Light source replaceable Yes Input Voltage 24 V
Driver included No Connection Connection unit 2-pole
Light source engine type LED Cable -
Product family code VGP703 [LUMA GEN2 MINI SOLAR]
Temperature
Light Technical Ambient temperature range -40 to +50 °C
Upward light output ratio 0
Standard tilt angle posttop - Controls and Dimming
Standard tilt angle side entry 0° Configurability Configurable
Correlated Color Temperature (Nom) 3000 K Dimmable No
Color rendering index (CRI) 70 Control interface -
Number of light sources 1
Light source color 730 warm white Mechanical and Housing
Optical cover type Glass Housing Material Aluminum die cast
Luminaire light beam spread 155° x 86° Optic material Polymethyl methacrylate
Optic type outdoor Distribution medium 10 Optical cover material Tempered glass
Fixation material Aluminum
Datasheet, 2024, September 16 data subject to change
Luma gen2 Solar
Housing Color Dark gray Over Time Performance (IEC Compliant)
Mounting device Side-entry for diameter 42 to 60 mm Control gear failure rate at median useful life 10 %
Optical cover shape Flat 50000 h
Optical cover finish Clear Lumen maintenance at median useful life* -
Overall length 734 mm 50000 h
Overall width 295 mm Lumen maintenance at median useful life* L98
Overall height 146 mm 100000 h
Effective projected area 0.0998 m²
Dimensions (Height x Width x Depth) 146 x 295 x 734 mm Application Conditions
Performance ambient temperature Tq 25 °C
Approval and Application Solar dimming profile configurable via charge controller
Ingress protection code IP66 [Dust penetration-protected, jet- Battery location on-pole, in-ground
proof]
Mech. impact protection code IK10 [20 J vandal-resistant] Product Data
Surge Protection (Common/Differential) - Order product name VGP703 40 4S 730 24V III DM10 42/60S
Sustainability rating Lighting for circularity Full product name VGP703 40 4S 730 24V III DM10 42/60S
Protection class IEC Safety class III Full product code 871951462374300
Flammability mark For mounting on normally flammable Order code 910925868310
surfaces Material Nr. (12NC) 910925868310
CE mark Yes Numerator - Quantity Per Pack 1
Warranty period 5 years Net Weight (Piece) 8.400 kg
EU RoHS compliant Yes EAN/UPC - Product/Case 8719514623743
Numerator - Packs per outer box 1
Initial Performance (IEC Compliant) EAN/UPC - Case 8719514623743
Luminous flux tolerance +/-7%
Initial chromaticity (0.434, 0.403) SDCM <5
Init. Color Rendering Index Tolerance +/-2
Standard Deviation of Colour Matching SDCM≤5
(McAdam ellipse)
Dimensional drawing
Datasheet, 2024, September 16 2 data subject to change
Luma gen2 Solar
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered www.lighting.philips.com
trademarks of Koninklijke Philips N.V. 2024, September 16 - data subject to change
