Device Main Feature The LED Indications Install SIM Card and Battery

1. Device working with Battery Indicator Status Description 1. Power off the MiFi.
2. UE Category4; Green Wi-Fi on 2. Remove the back cover and battery.
3. WIFI1*1 Green 3. Insert the SIM card into the card slot in the
Wi-Fi WPS on
4. Dual SSID(optional); flicker correct position.
LED
5. Multiple APN (optional); WiFi is off, or MiFi is under sleep 4. Install back cover and battery.
Off
mode/power save mode.
6. Maximum connection with 8 users.
Internet Green Internet OK
Note: DO NOT remove the LTE SIM card when the
LED Red Internet service failed
MiFi is powered on, as this may damage the card and
Message
Getting to Know Your LTE MiFi Green Unread messages the MiFi
LED
Battery Green Volume≥80%
4G MIFI LED Red Volume≤20% Turning on MiFi
1. The device can be started by battery.
Application Scene 2. Press “power” button and hold for a while until the

Quick Start Guide Based on LTE WAN network Battery LED is lit, and after a while Wi-Fi led is on.

I. Setting up Wi-Fi connection or

wired connection
1. Make sure the LTE MiFi’s Wi-Fi function is on.
2. PC or Mobile click “View available wireless
1. WIFI LED networks” to show a list of available Wi-Fi networks.
2. INTERNET LED 3. Select the wireless network connection with the LTE
3. SMS I LED MiFi's SSID and click “Connect”. If the security
4. BATTERY LED mechanism is applied, you need to enter the correct
Model: LF300 5. POWER ON KEY network key. The SSID and network key are printed
6. WPS KEY at the back part of the MiFi's battery cover.
7. Micro USB In order to connect it through USB cable, MiFi must
8. RESET KEY be turned off before connected to the computer.
4. Connecting the WiFi via WPS function is also 3. Enter username and the password, and factory defaults that come with the MiFi to 2. The MiFi product shall only be connected using
available, please press the WPS button for more click “login”. The administrator has the right to reconfigure the device Wi-Fi setting. a USB interface of version USB2.0.
than 3 seconds to enable it. check and modify configuration permission. 3. User’s adapter shall be installed near the
 Log into Device Management Website to
equipment and shall be easily accessible.
restore to factory default settings.
Note: How to change the SSID & Note: The default password is admin. 4. The maximum operating temperature of
 Press and hold “Reset” button for 5 seconds,
Password the MiFi is 40℃.
and the MiFi will be activated again and
Charging your MiFi restored to factory settings. 5. This equipment is in compliance with
1. Log in to http://192.168.0.1 (refer to the device
1st method: Charging by power adapter the essential requirements and other relevant
label) and enter the management page.
1. Use compatible power adapter (5V, Note: Reset button will delete all the device’s provisions of directive 1999/5/EC.
2. Select Device Settings > Wi-Fi Settings > SSID
Settings, then you will see “Network Name (SSID)” 1000mA). user-defined Wi-Fi settings and restore Admin
and “Pass Phrase”, Make sure you delete the old 2. Power adapter is a selective accessory. setting and Wi-Fi Setting to factory defaults.
name and password and enter the new name and
password as you require. 2nd method: Charging by connecting to Trouble Shooting:
3. Select “Apply” button, then log out. computer or laptop. Please use the proper cable
If you are having trouble with the MiFi, here are a
4. Wait for the computer or laptop screen to to connect the MiFi to the computer or laptop.
few things you can do to get it to function
display the Wi-Fi icon. This means the wireless properly:
network connection has been successful. Note: If the MiFi hasn’t been used for a long 1. If the MiFi is not responsive, reboot it by
time, please charge the battery before using.
pressing the ‘Reset’ button for about 5 seconds.
III.Connecting to the Internet 2. Restore factory settings
USB Storage
If the Wi-Fi function is turned on, your device
should connect to the internet automatically. Connect the MiFi to the computer using a data Note: All figures above are for reference
cable. Once the computer reads the inserted SD only.
IV.Logging into the Device card of the MiFi, it will start to function as USB
storage. Note!
Management website
1. Caution: Risk of explosion if battery is
1. Make sure the end-user device is connected Restore Factory Settings replaced with an incorrect or unapproved type.
to the MiFi.
If you are uncertain of which Wi-Fi settings you Used batteries must be disposed according to
2. Open the browser, enter http://192.168.0.1
have configured or changed, you can restore the the manufacturer's instructions.
(refer to the device label) in the address box.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device complies with RF specifications when used at a distance of 10mm from
your body. Ensure that the use of belt clips, holsters and similar accessories should
not contain metallic components. Keep the device away from your body to meet the
distance requirement.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The antenna(s) used for this transmitter must
not be collocated or operate in conjunction with any other antenna or transmitter.
The SAR limit set by the FCC is 1.6W/kg. The highest SAR value of this device type
complies with this limit.