Torque Limiting Screwdrivers

Miniature Model Accessories & Kit

Slotted Bits Hex Keys

Blade Blade Screw
Part No. Hex Cap Set Flathead
Width Thickness Size Part No. Size Screw Size Screw Size Screw Size
TW0 .040 .004 0000,000 TW12D .028 - 0 -
TW1D .055 .006 0000,000 TW13D - 1, 2 0
.035
TW2D .070 .006 000,00 TW14D 0 3, 4 1, 2
.050
TW3D .080 .008 00,0,1 TW15D 1 5, 6 3, 4
1/16
TW4D .100 .010 0,1,2 TW16D 2, 3 8 5, 6
5/64

Hex Sockets Spline Key

Hex Screw Nut
Part No. Part No. Spline Size No. of Flutes
Size Size Size
TW5D 5/64 000,00 000,00 28715-01 .048 4
TW6D 3/32 0 - 28715-02 .048 6
TW7D 7/64 1 - 28715-03 .060 6
TW8D 1/8 2 - 28715-04 .069 6
TW9 5/32 - 0,1 28715-05 .072 6
28715-06 .076 4
28715-07 .096 6

Phillips Bits
Part No. Point Size Screw Size

TW10D 0 0,1 Universal Bit Holder

TW11D 1 2, 3, 4 Part No. Description
This holder can be drilled out to accommodate odd
Miniature Kit No. KTT-1 HW20 keys and bits. Also used as an adapter for checking
Range 5-20 in.-oz. 29 piece light duty torque screwdrivers on Torque Testers.
Part No.
Qty. Description
Comp.
1 TT-1 Adj. torque screwdriver
1 TW0 Torque screwdriver bld. .040
1 TW1D Torque screwdriver bld. .055
1 TW2D Torque screwdriver bld. .070
1 TW3D Torque screwdriver bld. .080
1 TW4D Torque screwdriver bld. .100
1 TW10D Phillips screwdriver SZ. 0,1
1 TW11D Phillips screwdriver SZ. 2,3,4
1 28715-01 Spline key size .048 - 4 Flutes
1 28715-02 Spline key size .048 - 6 Flutes
1 28715-03 Spline key size .060 - 6 Flutes
1 28715-04 Spline key size .069 - 6 Flutes
1 28715-05 Spline key size .072 - 6 Flutes
1 28715-06 Spline key size .076 - 4 Flutes
1 28715-07 Spline key size .096 - 6 Flutes
2 HW20 Bit holder universal torque
1 TW5D Hex socket 5/64”
1 TW6D Hex socket 3/32” Miniature Kit KTT-1
1 TW7D Hex socket 7/64”
1 TW8D Hex socket 1/8”
1 TW9 Hex socket 5/32”
1 TW12D Hex key .028
1 TW13D Hex key .035
1 TW14D Hex key .050
1 TW15D Hex key 1/16
1 TW16D Hex key 5/64
1 Case
1 Insert

CAUTION: 1. Under normal use, periodic recalibration may be necessary to ensure accurate readings and applied torque.
2. FOR EXTENDED SPRING LIFE, RETURN TO LOWEST SETTING AFTER EACH USE.