Name of work :- Providing Basic Amenities and Beautification to Tourist At Ozarkhed Dam

Premises Tal Dindori , Dist Nashik

Measurements Sub Estimate No.1

0
I.No. Description of Item No. Length Breadth Depth Quantity Unit

1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing
the excavated material up to a distance of 50 m. necessary back filling, ramming, watering including
shoring and strutting, dewatering etc. complete. (Lift upto 1.5 m) by Manual Means.
For Parking Area 1 x 50.00 x 15.00 x 0.30 225.00

For Wall For Chain 1 x 250.00 x 0.60 x 0.60 90.00

link
For Watch Tower Raft 1 x 3.00 x 3.00 x 0.60 5.40
Ladder 1 x 0.75 x 0.60 x 0.60 0.27
platform 1 x 9.50 x 9.50 x 0.60 54.15
Ampitheatre 2 x 7.00 x 2.40 x 0.60 20.16

394.98 Cum.

2 Excavation for foundation in hard murum including removing the excavated material necessary back
filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.50 m)
by Manual Means.
For Watch Tower Raft 1 x 3.00 x 3.00 x 1.50 13.50

Ladder 1 x 0.75 x 0.60 x 0.60 0.27

platform 1 x 9.50 x 9.50 x 0.60 54.15

67.92 Cum.

3 Providing dry rubble stone soling 15 cm. to 20 cm. thick including hand packing and compacting
complete.

For Parking Area 1 x 50.00 x 15.00 x 0.20 150.00

For Wall For Chain 1 x 250.00 x 0.60 x 0.20 30.00
link
For Watch Tower Raft 1 x 3.00 x 3.00 x 0.20 1.80
Ladder 1 x 0.75 x 0.60 x 0.20 0.09
platform 1 x 9.50 x 9.50 x 0.20 18.05
Ampitheatre 2 x 7.00 x 2.40 x 0.20 6.72

Measurements iKNOW Page No. 1 of 9

 206.66 Cum.

4 Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/
gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping,
compacting, roughening them if special finish is to be provided, finishing if required and curing
complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum
Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand
V.S.I. Grade).

For Parking Area 1 x 50.00 x 15.00 x 0.15 112.50

For Wall For Chain 1 x 250.00 x 0.60 x 0.15 22.50
link
For Watch Tower Raft 1 x 3.00 x 3.00 x 0.15 1.35
Ladder 1 x 0.75 x 0.60 x 0.15 0.06
platform 1 x 9.50 x 9.50 x 0.15 13.53
Ampitheatre 2 x 7.00 x 2.40 x 0.15 5.04
Road Surface 1 x 250.00 x 5.00 x 0.10 125.00
CC Road 1 x 50.00 x 5.00 x 0.10 25.00
304.98 Cum.
5 Providing and laying in situ/ Ready Mix cement concrete M-30 of trap/ granite/quartzite/ gneiss metal
for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns
and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks,
compaction and curing roughening the surface if special finish is to be provided, (Excluding
reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with
SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete,
with fine aggregate (Crushed sand V.S.I. Grade).

Raft 1 x 3.00 x 3.00 x 0.75 6.75

6.75 Cum.
6 Providing and laying cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss
metal for R.C.C. columns as per detailed designs and drawing or as directed including centering,
formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement
mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special
finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with
fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/
concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).
Watch Tower Col 4 x 0.90 x 0.90 x 3.00 3.24
3.57 Cum.

Measurements iKNOW Page No. 2 of 9

7 Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/quartzite/ gneiss
metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including
centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special
finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with
fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/
concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Beam 2 x 2.40 x 0.90 0.60 2.59

13.38 Cum.

8 Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile
caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,
copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending,
Raft 1 x 6.75 x 100.00 675.00
Column 1 x 3.57 x 120.00 428.40
beam 1 0 13.38 x 120.00 1605.60
2.71
2.71 M.T.
9 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,
gusset plates etc. as per detailed designs and drawings and one coat of anticorrosive paint and over it 2
coats of oil painting approved quality and shade etc. complete.
As per Attached Sheet 2.11

For Flooring Chequred 1 2.10 2.10 346.19 0.35

plate
2.46 M.T.

10 Providing and applying two coats of synthetic enamel paint of approved colour to new/ old structural
steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat) etc. complete.

2 x 2.10 x 2.10 8.82

8.82 Sqm.
11 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or velley to
galvanised iron sheet roofing including all fastening and bolt galvanised iron screws and bolts and lead
and bitumen washers complete. ( Weight of 6.8 Kg/Sq.m.)
Roofing 2 x 4.00 x 4.95 39.60
39.60 Sqm.

Measurements iKNOW Page No. 3 of 9

12 Providing and erecting a wire rope safety barrier with vertical posts of medium weight RS Joist (ISMB
series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground
level, split at the bottom for better grip, embedded in M-15 grade cement concrete 450 x 450 x 450
mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm diameter and anchored at
terminal posts 15 m apart. Terminal post to be embedded in M-15 grade cement concrete foundation
2400 x 450 x 900 mm (depth), strengthened by a strut of R.S. joist 100 x 75 mm, 2 m long at 450
inclination and a tie 100 x 8 mm, 1.50 m long at the bottom etc. complete.
4 x 15.00 x 60.00

60.00 Rmt.

13 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed
items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings
or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/
welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved
40 mm SQ Pipe

12 1.80 4.50 97.20

15 1.20 2.00 4.50 9.00

15 1.20 2.00 4.50 9.00

Gate 100 mm 2 6.00 1.00 15.00 15.00
2 2.00 1.00 15.00 15.00
10 1.50 15.00 46.00 690.00
2 6.00 12.00 4.50 54.00
889.20
0.89 M.T.
14 Providing hard murum side shoulder including supplying hard murum at the road site, including
spreading and compacting for sidewidth layers on each side with vibratory roller including artificial
watering etc complete.

side width 2 x 250.00 0.60 0.30 90.00

90.00 Cum.
15 Providing and fixing informatory sign boards in square or rectangular shape of size 1.80m x1.20m
made out of 3mm Aluminum composite panel bonded with IRC Specified colour of retro reflective
sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive /
heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure
sensitive adhesive having border & messages in IRC Specified colour background including M. S.
angle iron frame of size 35 mm X 35 mm X 5 mm & two M.S. angle iron post of size 65 mm X 65 mm
X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm
width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Aluminum composite panel with Type IV High
Intensity Micro-Prismatic Grade Sheeting.

Measurements iKNOW Page No. 4 of 9

 1.00 No.
16 Providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding
I.S.of approved manufacture and of approved colour to the plastered surfaces including cleaning,
preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for
two days etc. complete.
For Existing Rest 2 X 5.00 X 4.50 45.00
HOUSE
For Existing Rest 2 X 7.00 X 4.50 63.00
HOUSE
60.000 Sqm.
17 Providing cast in situ / ready mix M-15 grade cement concrete for head walls of Cross Drainage work /
retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete.
With fine agreegates of required specifications (VSI sand finely washed etc.), cement 6.00 bags/cum).
1 250.00 x 0.45 x 0.60 67.50
1 9.50 x 9.50 x 0.15 13.54

81.04 Cum.
18 Providing and errecting chain link fencing 1.6 metre height with galvanised iron chain link of size 50 x
50 milimetre 8 guage thick and fixed 75 milimetre above Ground level on vertical Mild Steel Angle of
40x40x6 milimetre size including excavating pits for foundation and embeded in cement concrete
block of 1:4:8 mix of size 450x450x670 milimetre at 1.75 metre center to center with iron bar 16
milimetre diameter as hold fast including welding link with angle frame at 30 cm. c/c nuts and bolts
and horizontal Mild Steel Angles at top and bottom of 25x25x5 metre size and vertical Mild Steel flat
35 x 5 metre and 25 x 5 metre horizontal including cross support of 40x40x6 metre Angles both sides
at every corner or bends embeded in concrete blocks of 1:4:8 of size 450x450x670 milimetre including
3 coats of oil painting etc. complete.

1 x 250.00 250.00
250.00 Rmt.
19 Providing sills of Granite other than makrana 20 mm. to 25 mm. thick, on a bed of 1:4 cement mortar
including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges and
cleaning complete.
For Entrance 4 x 3.00 0.60 7.20

For Entrance 10 x 7.00 0.45 31.50

38.70 Sqm.
20 Providing and fixing 90 cm. x 60 cm. Granite plate engraving 10 cm. height letter, figures complete.

3 3.00
3.00 No.

Measurements iKNOW Page No. 5 of 9

21 Providing & fixing BENCH IN CEMENT MORTOR/CONCRETE WITH Rmt WOODEN FINISHING ON
ALL EXTERNAL SURFACE. Bench should have min. 2.1m to max. length 2.4m with 0.45m
wide seat & 0.40m high back for resting. beach should have 2 to 3 supports/Legs as
per requirement from ground in 1:1.5:3 ratio Concrete with 4 bar 12mm as a main &
distribution 8mm Tor steel at 150mm c/c. Rate includes proper cleaning of surface
by sand paper application of 1 coat of Apex exterior grade primer above that 2
coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making
wooden finish/grains & with 2 final coat of Apex clear polish including Cement.
Sand, Aggregate. chemical, adhesive, chickenmesh. primer, paint. polish, paper,
etc. all material. labor. scaffolding, excavation. pec, for steel etc. all
complete. Work done should be as per a approved sample & the instructions of
engineer incharge.
25.00 No.
20.00 No.
22 Providing second class Burnt Brick masonry in cement mortar 1:6 in superstructure including striking
joints, raking out joints, watering and scaffolding complete.

Ampithe. 5 7.00 0.45 0.30 4.73

5 7.00 0.45 0.30 4.73
9.45 Cum.
23 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high
density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of
accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000
liters.

2 5000.00 10000.00
10000.00 Ltr.
24 Providing and fixing on walls /ceiling /floor 20 milimetre diameter CPVC pipe with necessary fittings,
remaking good the demolished portion.Including removing existing pipe line if necessary and
conveying and stacking the same in PWD chowky or as directed etc. complete.

1 x 90.00 90.00
90.00 Rmt.
25 Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:4 without neeru finish,
to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

2 x 7.00 x 1.55 21.70

2 x 7.00 x 1.55 21.70
43.40 Sqm.
26 Planting small and medium size ornamental flowering plant-.Digging pit with size
0.60x0.60x0.60m. Removing rubbish and conveying unwanted stuff to a required
distance as directed.Filling the pit with fresh garden soil and farm manure up to
height of 0.60m in 3:1 proportion Mixing the soil and manure throughiy well,
levelling watering on previous night. Planting one or 2 year healthy plant sapling
as per specification Maintaning till well established by watering, weedings,
stirrings, prunning, replacing the casualties etc. comple
70 70.00
70.00 No.
27 Providing and laying in situ cement concrete M30 with tremix treatment for 200 millimeter thickness
for flooring with groove cutting of 4 millimeter wide and 20 millimeter deep with necessary refilling
with bitumen etc. complete.

Measurements iKNOW Page No. 6 of 9

 Road 1 x 50.00 x 5.00 250.00
250.00 Sqm.
28 Providing and fixing 40 mm diameter and 1.5 mm thick Stainless steel hand railing etc. complete.

1 x 50.00 50.00

50.00 Rmt.
29 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of
Contractor, Work completion and liability period etc.', having rectangular shape of 1.20 m. x 0.90 m.
size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate
stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and
border/ messages/ symbols etc. on M.S. angle of size 35 x 35 x 3 mm. frame with properly cross braced
M.S. angles of size 35 mm. x 35 mm. x 3 mm. duly painted including all fixtures etc. and fixing the
boards in 1:4:8 concrete block of size 60 cm. x 60 cm. x 75 cm. including, excavation, refilling,
transportation and labour etc. complete.
1 1.00
1.00 No.
30 Preparing instant Lawn (20cm, depth):- Excavating the ground to a required depth
of 20cms, removing & conveying unwanted stuff to a required distance as directed,
Filling fresh garden soil/silt & maure in exavated area in 3:1 proportion to a
height of 20cms. Mixing garden soil and manure thoroughly well, leveling, and
watering on previous night. Planting required variety of lawn grass as directed
and maintaining till well established by watering, weeding, clipping, rolling etc.
complete.

1 x 35.00 15.00 525.00

525.00 Sqm.
31 Providing and Fixing heavy duty inter locking concrete rubber mould glossy Paving blocks of 80 mm
thickness etc. complete

Road 1 x 250.00 x 5.00 x 1250.00

1250.00 Sqm.
32 Providing and laying in trenches 50 milimetre diameter CPVC pipe with necessary excavation etc.
complete.
1 200.00 100.00
100.00
Rmt.
33 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING
BLOCKS of 60 mm thickness on a bed of crushed sand of 25 to 30 mm (using 100% crushed sand).
parking 1 50.00 15.00 750.00
750.00 Sqm.
34 Providing and fixing kerbstone with LED lighting system as per following specifications: dimensions
with vertical mounting legs with 10 mm horizontal square shape mild steel reinforcements.
Illuminated kerb stone having visible dimensions of 500 mm x 150 mm x 150 mm.(as per IRC 86:1983
) 80 mm legs having mild steel reinforcements shal be embedded in black topped/concrete road
surface.The kerb stone should have kerb angle of 45 degree, with rubber plugs at both ends of the
kerbstones (2 nos.) having load carrying capacity of vertical- 1465 kg, horizontal- 2349 (certified by
Measurements iKNOW Page No. 7 of 9
 Front 1 x 30.00 30.00
30.00 Rmt.
35 Providing and fixing Cautionary/Warning sign boards in Octagone size of 750 mm made out of 4 mm
aluminum aluminum composite material with 0.5 mm skin thickness on either side, sheet bonded
with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting)
having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and
back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3
Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with
grey stove enamel paint and 5 supported on one no. of M. S. angle iron post of size 65 mm5.00X 65 mm
5.00 No.
36 Procurement, Supply, Fabrication, Erection, Installation (upto 20 kms lead within city limits) of
required height Sign Board to have a clear and legible visibility, made with 100 mm x 50 mmx
5 mm thick Channel Section, cross bracing in Angle section of size 35 mm x 35 mm x 5 mm
(wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M-20
grade Plain Cement concrete foundation of size 600 mm x 600 mm x 750 mm etc. complete of
final size of visible area 06 ft height x 3ft horizontal x 4ft Vertical EPS Panel.

2.00 No.
37 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (as per
IRC:86-1983) embedded 125 mm below ground level over M-10 P.C.C. finished neatly with C.M. 1:2,
setting the same in C.M. 1:2,2including the required excavation, using Concrete Batching200.00
100.00 and Mixing
200.00 Rmt.
38 Providing & fixing Gazebo IN CEMENT MORTOR/CONCRETE WITH WOODEN FINISHING ON ALL
EXTERNAL SURFACE. Gazebo should have min. 3m square in size 3.5m height at centre
and 3m height at periphery with 4 Vertical supports at edge. Gazebo should have 8
rafters (1 to connect each outer support to central support and 4 to connect each
other) and 3 purlins between each rafter to support slab. Vertical supports should
comprises of 100mm square MS pipe of C-class with total size of 200mm (including
outer concrete), rafter should comprises of 50mmX100mm MS box pipe 6mm thick with
total size of 150mm X 200mm (including outer concrete), purlins should comprises
of 30mmX50mmX6mm MS angle section with total size of 75mmX 100mm (including outer
concrete). Outer concrte around every element should be in 1:1.5:3 ratio Concrete.
The concrete for slab above purlins should be of 100-120mm thick in 1:1.5:3 ratio
RCC with 8mm Tor steel at 150mm c/c bothways. Rate includes proper cleaning of
surface by sand paper application of 1 coat of Apex exterior grade primer above

4.00 No.
39 Providing & fixing BAMBOO FINISH RAILING IN CEMENT MORTOR of 1:3 proportion with
appropriate thickness resembling bamboo of diameter 2½ to 3 inch. Railing clear
Height 1.0m with underground support of minimum 0.45m depth of 1:1.5:3 ratio
concrete of size 0.3 x 0.3 x 0.6m. vertical supports should be at min. 1.0 m
intervals & with 10mm Tor steel 2nos in each horizontal member & 3nos in each
vertical member. Railing will have two horizontal & two diagonal members in each
panel. All external surfaces will have bamboo finish. Rate includes proper
cleaning of surface by sand paper application of 1 coat of Apex exterior grade
primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of
Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear
polish including cement, Sand, chemical, adhesive, chikenmesh, primer, paint,
polish, paper, etc. all material, labor, scaffolding, etc. all complete

2 x 100.00 x 200.00

Measurements iKNOW Page No. 8 of 9

 200.00 Rmt.
40 Providing & fixing Selfie Point IN CEMENT MORTOR/CONCRETE WITH WOODEN FINISHING ON
ALL EXTERNAL SURFACE. Selfie point should have min. 3m in length and 3.5m height.
Selfie points outer concrte around every element should be in 1:1.5:3 ratio
Concrete. The concrete for base slab above should be of 100-120mm thick in 1:1.5:3
ratio RCC with 8mm Tor steel at 150mm c/c bothways. Rate includes proper cleaning
of surface by sand paper application of 1 coat of Apex exterior grade primer above
that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for
making wooden finish/grains & with 2 final coat of Apex clear polish including
Cement. Sand, Aggregate. chemical, adhesive, chickenmesh. primer, paint. polish,
paper, etc. all material. labor. scaffolding, excavation. pec, for steel etc. all
complete. Work done should be as per a approved sample & the instructions of
engineer incharge.

1.00
1.00 No.
41 Providing & fixing Entrance Gate IN CEMENT MORTOR/CONCRETE WITH WOODEN FINISHING
ON ALL EXTERNAL SURFACE. Entrance Gate should two columns on sides and 1 beam on
top with columns having min. 4.8m height out of which 1m should be embeded in
ground and beam clear span should be of 3.75m. Column outer diameter should be
0.63m and Beams outer diameter should be 0.59m. Column consists of L section with
75X75X5 mm 4 angles one at each corner and bracings with L section of 25X25X4 mm
as shown in drawing. Outer concrte around every element should be in 1:1.5:3 ratio
Concrete. The concrete for slab above purlins should be of 120-150mm thick in
1:1.5:3 ratio RCC with 8mm Tor steel at 150mm c/c bothways. Rate includes proper
cleaning of surface by sand paper application of 1 coat of Apex exterior grade
primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of
Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear
polish including Cement. Sand, Aggregate. chemical, adhesive, chickenmesh. primer,
paint. polish, paper, etc. all material. labor. scaffolding, excavation. pec, for
steel

1.00 No.
42 Providing and installation of Telemetry Rain Gauge of Tipping Bucket Type with
resolution 0.25 mm.( For Safety Of Tourist it will give Warning regarding Heavy
Rainfall & easy Evacutation of Tourist)

1.00 No.
43 Providing and installation of Radar Water Level sensor of range 0-30
m.(For Tourist Safety it will give warning of heavy flood)

1.00 No.

Measurements iKNOW Page No. 9 of 9