Construction Equipment
SD200-2
Engine Power
T2 SAE J1995, gross 129KW (174 HP) @ 1,800 rpm
T3 SAE J1995, gross 126.5KW (170 HP) @ 2,000 rpm
without notice. Specification(s) for your individual Doosan equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors. Pictures of
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change
Operational Weight
T2 23,300 kg (51,368 lb)
T3 21,700 kg (47,840 lb)
Bucket Capacity (SAE/PCSA)
T2 0.39 ~ 0.92 m3 (0.51 ~ 1.20 yd3)
T3 0.39 ~ 1.24 m3 (0.51 ~ 1.62 yd3)
Doosan units may show other than standard equipment
Hyundai Doosan Infracore
489 Injung-ro, Dong-gu, Incheon, South Korea
http://global.doosanequipment.com
DIPBE-00-2206
Hyundai Doosan Infracore is an affiliate of Hyundai Heavy Industries Group.
The Doosan trademark, , is used under license from Doosan Corporation.
1 2
SD200-2
RELIABLE WORK HORSE
PRODUCTIVITY & PERFORMANCE
· The fixed wheel transmission boasts stable performance,
high reliability and conveniently agile operation.
· Longer wheel-base and arranged design to make
center of gravity positioned rearward helps 200-2 work
more stable.
RELIABILITY AND DURABILITY
· 93 dust air filter, effectively reduces the engine
failure rate, realizing high efficiency and energy saving
together with the large-capacity torque converter.
· The advanced Doosan drive axle and improved
differential gear process increased gear flexural
strength, enhancing the reliability of the drive
axle and extending its lifespan.
02 03
BIGGER EFFICIENCY HANDY MAINTENANCE / OPERATOR COMFORT
EASY APPROACH
Easy approach to the filters in the engine room
and brake system for simple maintenance.
DUAL FUEL FILTER
Highest efficiency filters remove water, dust &
SMALLER TURNING RADIUS AND AGILITY particles to protect your engine optimally. Dual
Larger steering angle (38°) makes smaller turning radius. fuel filters reduce the risk of external engine
Small turning radius offers flexibility for operator to adapt contamination and lengthen the engine’s lifespan.
in a confined space.
PERFECTLY MATCHED POWER TRAIN AIR CLEANER
Engine, transmission and axles are optimized and Air cleaner for extremely dusty environment is
finely tuned for each other and produce powerful applied to prevent dust in the desert area from
ENGINE (WP6G125E23)
traction. permeating into the engine.
The engine produces 92 kW at 2,300 rpm.
OPTIMIZED Z BAR FRONT weichai engine is adopted for strong power.
Z bar front and hydraulic system is designed for heavy pumps with large displacement are equipped,
OIL LEVEL MONITOR
loads. This geometry enables rapid bucket movements, which greatly increases working efficiency
Used to monitor the hydraulic oil level more easily
ensures correct angle positioning and good loader and decreases fuel consumption and noise,
to reduce maintenance time, improving device
stability. together with short total cycle time. service life-time.
ROTATING BEACON
For enhanced safety rotating beacon is equipped
in SD200-2 as standard, which gives the warning
alarm while driving.
FIRM AND LASTING QUALITY
REINFORCED PINS DURABLE AXLE DESIGN SOLID FRAME STRUCTURE
Where workload are most severe, More durable materials and 3D CAD and FEM technologies
diameter of 6 pins is thicker than technology were applied to are adopted in the analysis of
competitors by 5 ~ 10 mm machining gears. technical design. Improving the
strength, durability and reliability
of the device.
RELIABLE HYDRAULIC IMPROVED PIPE WELDING
COMPONENTS New and improved welding
This components provides process is applied to high
delicate control, less internal leak pressure pipes.
and longer service life.
04 05
TECHNICAL SPECIFICATION DIMENSIONS & WORKING RANGE
B
H
F
L G C
D J
E K
A
I
ENGINE GENERAL SPECIFICATIONS Machine Dimensions (A*B*C) mm 7,010 * 2,520 * 3,180
Model Weichai WP6G125E23 (T2) Operating Weight 10,340 kg
Overall Length A mm 7,010
Rated Power (SAE J1995 Gross) 92 kW @ 2,300 rpm Bucket Capacity 1.8 m3
Max. Torque 500 N.m Breakout Force 93±7 kN Overall Width B mm 2,520
Payload 3,000 kg
Dimension Overall Height C mm 3,180
Static Tipping Load (straight) 73 kN
Ground Clearance D mm 370
TRANSMISSION Max. Speed 39.5 km/h
Torque Converter Countershaft power shift Front Speed ≤ 9.8 S, (Arm Lift < 5.9) Wheel Base E mm 2,850
Torque Converter Type Single-Stage Three elements Max. Tractive Effort 100 kN
Tread F mm 1,850
Max. Input Torque/Max. Input Speed 650 N.m/ 2,500 r/min Axle Type Dry type
Dump Height G mm/° 2,960 / 45
Tire Type Bias Tire
Tire size / Inside / PR / Pattern 17.5-25 / Tube / 12PR / Standard Dump Reach H mm/° 1,040 / 45
Engine Cover Type Backflip
Height at bucket pivot point L mm 3,795
Working
Steering System Articulated load-sensing hydraulic steering system Range
External radius at bucket edge I mm 5,950
Hydraulic System Control Pilot type
Turning Radius at tire edge K mm 5,370
Steering Angle J degree (°) 38±1
Gradeability degree (°) 30
06 07
