Specifications

Stock Range

Cardboard 80- 2000 g/m2 (subject to quality of the paper)

thickness 4mm ETERNA always puts quality first during the development. Each product Automatic Die-Cutter
Corrugated Board
(subject to quality of the corrugated board) goes through rigorous and meticulous tests. Attention from every tiny with Stripping Station
detail, every production process, every technology procedure, even the

CUT 1060
small aspect of product management, is taken very seriously. Because we
Basic Performance always uphold the philosophy of manufacturing the highest quality
products for our customers.
Max. Sheet Size 1060 × 750 mm

Simply
Min. Sheet Size 400 × 360 mm

Max. Mechanical Speed 7500 s/h

Max. Cutting Pressure 300 ton Eterna is committed

E
Maximum Pile Height (incl. pallet)
tto creating die-cutting
cutting

efficient
m
machines with highest
Max. Pile Height at Feeder (Normal Mode) 1250 mm (+300 mm optional)

Max. Pile Height at Feeder (Non-stop Mode) 1000 mm (+300 mm optional)

Max. Pile Height at Delivery (Normal Mode)

Max. Pile Height at Delivery (Non-stop Mode)

1150 mm (+300 mm optional)

1000 mm (+300 mm optional)

q
quality standards.
Die-Cutting

Max. Cutting Size 1040 × 720 mm

Inner Chase Size 1080 × 745 mm

Min. Gripper Margin 8 mm

Cutting Rule Height 23.8 mm

Electrical

19 kw (ECUT 1060); 20 kw (ECUT 1060E)

Total Power Required
43 kw (ECUT 1060H); 44 kw (ECUT 1060EH)

Electrical Power 380V, 3 phase, 50HZ

Max. Air Compressor Displacement 0.36 m³/min

6120 × 4290 × 2030 mm (ECUT 1060, ECUT 1060H)

Machine Dimensions
7075 × 4290 × 2030 mm (ECUT 1060E, ECUT 1060EH)
Address:
15 tons (ECUT 1060, ECUT 1060H) 1125 Taishun Road, Anting Town, Jiading District, Shanghai, China
Gross Weight 16.5 tons (ECUT 1060E, ECUT 1060EH) +86-21-6426 2538
export@eterna-group.com
www.eterna-group.com

In the interests of product improvement, the manufacturer reserves its rights to change specifications and features without notice.

eterna-group.com
Automatic Die-Cutter CUT 1060
with Stripping Station

CUT 1060
ECUT 1060 Series Die Cutters are developed based on proven technology from decades of analyzing
customers’ user experience, combining with current market trend. This machine is reliable, easy to
operate and will greatly enhance your productivity and speed up return on investment.

FEEDER FEED TABLE SECTION STRIPPING SECTION (E) DELIVERY SECTION

- Preloading system with either preloading rail - Slanted Feed Table to obtain stable and - Triple action movement of the upper and - Non – stop delivery with automatic slow down,
cart or with pallet jack to reduce down time; accurate registration especially for lightweight lower stripping frames with lower designed with safety device;
- Non – stop feeder with automatic pile lift; paper at high speed; spring-loaded stripping pins; - Sheet stretching air blower and sheet tail
- Four pick-up and forward suction heads with - Side lays on both left- and right-hand sides - Upper and lower stripping tool mounting pressing down brush bar;
angle adjustments; push and pull convertible; frame can be pulled out for job set up; - Rear and side joggers with easy position
- Patented turbo spiral air blower for smooth - Sheet slow down device of feeding belts with - Gripper edge removal system as standard; adjustments;
sheet transport. selective on/off switch to ensure accurate - Motorized upper frame suspending hoister. - Counter with Tape inserter as standard.
registration of the sheet at front lays.

DIE-CUTTING SECTION HEATING SYSTEM (H) LUBRICATION SYSTEM SAMPLING CAPABILITY

- Pneumatic push button die chase locking - Heating base with 12 heating zones, can be set - Cooling system for lubrication oil to reduce - Easy sampling system to enable operators
mechanism to ensure safe and operator up temperature and adjustment individually; pressure difference thus lower product checking product quality easily and safely.
friendly during job change; - Fast heating-up electric heating base to reach defective rate;
- Gripper driving chain lubrication system is
- Gripper bar driving chain tension wheel to the required working temperature within only
controlled by solenoid valves to avoid splashing
keep the tension constant; 30 minutes; oil onto products;
- Digital cutting pressure tonnage display with - Self contained heating control device. - Gripper bar is force lubricated via pumping
maximum pressure limit protection; system.
- Heating Temperature Adjustment Range: 0°C – 200°C
Main Features - Seven high precision alloy gripper bars.
- Heating Zone of Heating Base: 12
- High performance, smooth running, low noise level, high safety features and easy to operate; State-of-art 3 cam index gripper bar driving
- Power Consumption of Heating Base: 24 kw
system to ensure smooth and precise gripper
- Fully automatic non-stop feeder and preloading capabilities to boost productivity;
bar intermittent movement;
- Utilizing best alloy steel material at all critical points to enhance the durability and precision of the machine; - Air blasting nozzle bar for stretching
- Protective stops when oil or air pressure is below designed level; lightweight paper.
- Hardened steel plate is both precise and durable;
- Entire travel path has no sharp corner to avoid any scratches;
- The specially designed three cam Index System runs extra smoothly;
- Sensors throughout the machine constantly monitoring every aspect of the operation and displaying any
relevant information on large and sharp display, in the event of any equipment or operation fault.