Sliding Side-Doors®
Sliding Side-Doors®
PRIMARY PURPOSE IS TO
PROVIDE COMMUNICATION
BETWEEN TUBING AND CASING
Sliding Side-Doors®
APPLICATION FOR
(USE OF)
1. CIRCULATION AND/OR
DISPLACEMENT
2. PRODUCE A FORMATION
3. PROVIDES A MEAN FOR GAS LIFT
Sliding Side-Doors®
HYDRAULIC CONTROL LINE
SURFACE-CONTROLLED
TUBING-RETRIEVABLE
SAFETY VALVE with ‘X’
Nipple Profile
SIDE POCKET
MANDREL
Single
FLOW COUPLING Selective
‘X’ LANDING NIPPLE
FLOW COUPLING Completion
SIDE POCKET
MANDREL
SIDE POCKET
MANDREL
SLIDING SIDE-DOOR®
CIRCULATING DEVICE
with ‘X’ Nipple Profile
RH HYDRAULIC-SET
PACKER
CIRCULATING DEVICE
with ‘X’ Nipple Profile
BLAST JOINT
TWB PERMA-SERIES®
PACKER
‘XN’ NO-GO NIPPLE
Sliding Side-Doors®
• Can be “Shift Up” to
Open or “Shift Down”
to Open
• Are designed with a
Nipple Profile in the
Top Sub
• Are designed with a
Polished Bore in the
Bottom Sub
• Are designed with an
Equalizing Feature
Shift UP Shift DOWN
Sliding Side-Doors
• AO - No Nipple Profile
• DO - No Nipple Profile
• XA – X Nipple Profile
• XO – X Nipple Profile
• XD – X Nipple Profile
• RA, RO, RD – R Nipple Profile
• RPT and FBN
XA Sliding Side-Door
XO Sliding Side-Door
XD Sliding Side-Door
Halliburton DuraSleeve®
Features:
Halliburton DuraSleeve®
In Development
XU & XD DuraSleeve®
Ultimate Reliability
In A Non-Elastomer
Circulation /
Production Sleeve
• Applications In -
• Producing Alternate Zone
In Single-Selective
Completion
• Circulating Kill Fluid
Eliminates Expense Of
Perforating Tubing
• Secondary Recovery
• Washing Above Packer
• Design Capability-
• Sizes For 1 1/2” To 7”
Production Tubing
• Pressure Ratings Equal To
Tubing Ratings
• Open-Up And Open-Down
Options
• A Variety Of Materials And
Thread Options
XU XD
DURASLEEVE®
DuraSleeve®
Top / Bottom
End Subs
TOP
END SUB
• Available With Any Of
Halliburton’s OTIS® Brand
Locking/Sealing Profile
• X® For Standard Weight
Tubing
• R® For Heavy Weight Tubing
• RPT For Top No-Go Profile
(Staggered No-Go Systems)
• FBN For Fullbore/Monobore
Completions
• Can Be Used As
Additional Landing
Nipple In Tubing String
BOTTOM
END SUB
DURASLEEVE™
Sliding Sleeve
DuraSleeve®
Equalizing Port
Configuration
• Minimizes Wear On Seals And
Prevents Leaks Caused By
Seal Damage
• Prevents Clipping Of Buffer
Seal With Low-Angle Exit
• Controls Equalizing Flow Rate
To Prevent Possible Wireline
And Tool Damage
DURASLEEVE™
Sliding Sleeve
DuraSleeve®
Flow Port
Configuration
• Minimizes Wear On Seals
And Prevents Leaks Caused
By Seal Damage
• Prevents Clipping Of Buffer
Seal
• Spaced To Prevent
Unsupported Load On Seal
Stack
DURASLEEVE™
Sliding Sleeve
XU DuraSleeve®
Sleeve
Positions
• In the “Closed” Position
Communication Ports are
Blocked.
• In the “Equalizing” Position
Equalizing Ports are
Exposed and Differential
Pressure is Balanced.
• In the “Open” Position Flow
Ports are Aligned and
Sleeve is positioned for Full
Open Flow.
OPEN
EQUALIZING
CLOSED
XD DuraSleeve®
Sleeve
Positions
• In the “Closed” Position
Communication Ports are
Blocked.
• In the “Equalizing” Position
Equalizing Ports are
Exposed and Differential
Pressure is Balanced.
• In the “Open” Position Flow
Ports are Aligned and
Sleeve is positioned for Full
Open Flow.
EQUALIZING
OPEN
CLOSED
42BO
SHIFTING TOOL
Self-Releasing Keys
42BO
SHIFTING TOOL
Selective Keys
142BO
• For Selective Down Shifting
• Uses only “Self-Releasing”
Keys.
• “Selective” Position – Keys
Retracted.
• “Controlled” Position – Keys
Expanded.
• Locates in the Packing Bore
of Sliding Side-Door®
Assembly
Positioning Tool
142BO
SELECTIVE
CONTROL
Side-Door Choke
• Packs-Off SSD
• With extended spacer pipe
can also be used to pack-off
Blast Joint.
• Equalizing Sub Required.
High Differential
Pressures can result
in Damage to Wire
Side-Door Choke
Separation Tool
• Plugs Lower Zone.
• Allows Upper Zone to Flow.
• Equalizing Sub incorporated.
High Differential
Pressures can result
in Damage to Wire
Separation Tool
Separation Tool
Camco CB-1 Sliding
Sleeve
Camco DB-1
Sliding Sleeve
Camco
Type ‘C’
Shifting
Tool
Baker ‘L’
Sliding Sleeve
Baker ‘D-2’
Shifting Tool
“Thank you”
