Scribd
Upload
1K views2 pages

Facility Electrical Safety Guide

This electrical inspection checklist contains sections to inspect production areas, electrical rooms, maintenance shops, and office/lab areas. It lists items to check such as ensuring disconnects and switches are properly labeled and functioning, no exposed or damaged wires, and equipment is accessible. Electrical rooms should be restricted with adequate ventilation and emergency lighting. Maintenance shops should have properly grounded and intact power cords and tool controls and lights operating correctly. Office and lab areas should have cords arranged safely without obstructions and heaters and devices unplugged when not in use.

Uploaded by

Bayu Ajisaputro Sastroprawiro
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
1K views2 pages

Facility Electrical Safety Guide

This electrical inspection checklist contains sections to inspect production areas, electrical rooms, maintenance shops, and office/lab areas. It lists items to check such as ensuring disconnects and switches are properly labeled and functioning, no exposed or damaged wires, and equipment is accessible. Electrical rooms should be restricted with adequate ventilation and emergency lighting. Maintenance shops should have properly grounded and intact power cords and tool controls and lights operating correctly. Office and lab areas should have cords arranged safely without obstructions and heaters and devices unplugged when not in use.

Uploaded by

Bayu Ajisaputro Sastroprawiro
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

Electrical Inspection Checklist

Facility: ___________________ Department __________________ Date _________ Production Areas:


Disconnects have proper covers & covers closed & fastened No flexible cords taped or showing signs of wear Emergency stop devices work Indicator lamps operating Unused openings are plugged Switches & circuit breakers labeled All seal tight & properly fitted No exposed wires on equipment All controls function properly Electrical cords do not hang on pipes, nails, hooks No cords pass through walls, ceiling, doors or windows Electrical panels accessible

Electrical Rooms:
Boxes & Cabinets labeled All equipment doors of original design Floors dry High Voltage Signs Posted No signs of deterioration of equipment No Storage in Electrical Room Motor control doors/covers closed and latched Disconnect arms operate breakers properly Rubber mats in place Restricted Access to Room Emergency lighting works properly Ventilation adequate for heat load

Maintenance Shop:
Power cords grounded No power cords are taped No broken/cracked handles Extension cords not used for power bench tools Controls work properly No sign of equipment deterioration Plugs properly attached to cords Tool Switches operate properly Equipment work lights operate properly Auto shut off features work

Office, Labs, Laundry, Break rooms:


Power cords arranged in a neat and safe manner No cords strung along walkways Coffee pots / warmers turned off at end of the day On/Off switches function properly on all equipment Electric heaters unplugged at the end of the day Power outlets and electrical devices covered Outlets within 6 feet of sinks ground fault protected Power panels accessible (2 feet on each side and 4 feet in front)

You might also like