LORD Butyl Rubber Strip
Description
LORD Butyl rubber strip is made of butyl rubber coated aluminum film, using the latest patented
technology, through a special process produced by the environment-friendly solvent-free sealing
adhesive material. It is a quick and effective method of sealing and repairing that produces a
lasting protection in all climates.
Materials Consist
Base materials Butyl rubber
Colors Black, Gray, White
Release paper PE film, Kraft paper etc.
*Upper surface and release paper can be customized.
Packaging
Thickness 0.3mm-20mm
Width 10mm-1000mm
Length 10m-30m roll
*The thickness, width and length can be made based on customers’requirments.
* Single side adhesive and double sides self-adhesive can be made.
Features and Benefits
1) Excellent mechanical properties: high bonding strength and tensile strength, good elasticity
and extension performance, strong adaptability to the shape change and crack of the interface,
and good ability to trace the shape change of the substance.
2) Stable chemical properties: It is equipped with excellent chemical resistance, weather
fastness, and corrosion resistance.
3) Reliable application performance: excellent binding property, water resistance, leak tightness
and low-temperature resistance, and high stability in
size.
Application Range
Roofs - around chimneys and skylights, over joints/ cracks in tiles and roof cladding.
Exterior walls - joints and cracks in asbestos cement sheeting, cracks under masonry ties and
anchorages, around wall penetrations (such as water pipes), gutters and down pipes.
Terraces - at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashing
and joints.
Car industry, repairing of roof and cars.
Adhesion
Steel, aluminum, metals, concrete, stone, bricks, cement plaster, polycarbonate, PVC, TPO,
glass, and wood.
Storage stability
12 months from date of production if stored in unopened, undamaged original sealed containers, in dry
conditions and protected from direct sunlight at temperatures between +5°C and +40°C.
Installing Guideline
The surfaces to be sealed must be dry, capable of bearing load and free from grease and dust.
Remove all loose dust and dirt with a wire brush and soft broom from the area of application.
Unroll and cut butyl tape to the required length.
Peel the backing strip and apply the adhesive side onto the prepared substrate.
Smooth down using a roller or gentle fingertip pressure to prevent air pockets and creases, and to
ensure a good tight seal. It is very important to press down the edges and ends of the tape. All joint
connections have to be overlapped min. 50 mm.
Attention
1) Before use, remove water, oil dust and other dirt from the surface.
2) The tape should be kept in a cool dry place, away from heat, sun or rain.
3) The product belongs to the self-adhesive material; one-time paste can achieve the
best waterproof effect.
4)At temperatures below +5 °C the tape and the substrate must be warmed before and
during the application. Use hot air equipment.
Limitation
1) Not suitable for sealing against water pressure.
2) Butyl adhesives are sensitive to solvents. Check chemical compatibility of the
butyl adhesive with the substrate.
3) Do not use for permanent fixing or in load bearing applications instead of
an adhesive or mechanical fixing.
Product
Disclaimer
This Product Data Sheet (PDS) summarizes our best knowledge of the product,
including how to use and apply the product based on the information available at the
time. You should read this TDS carefully and consider the information in the context of
how the product will be used, including in conjunction with any other product and the
type of surfaces to, and the manner in which, the product will be applied. Our
responsibility for products sold is subject to our standard terms and conditions of sale.
RG JIAYE does not accept any liability either directly or indirectly for any losses
suffered in connection with the use or application of the product whether or not in
accordance with any advice, specification, recommendation or information given by it.
