Setting Procedure of Network Drive Function
（MAPPS II / III / IV）
With MAPPS II, III, and IV, you can assign a share folder on a personal
computer (PC) to the MAPPS network drive and input-output data to
and from the network drive.
The MAPPS network drive requires no special application on PC and
enables high speed input-output transmission.
This document provides procedures to set the input-output function to the
network drive.
Support MAPPS software version
I98756/I98757 A27~
MAPPS4 I98868/I98869 A19~
I98942/I98943 A08~
I98987/I98988 A01~
MAPPS3 I98143 C08~
I98182 C08~
I98871 A07~
MAPPS2 I98872 A07~
I98873 A07~
1/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
1. Setup of a share folder on PC
Set a folder designated as a storage of input-output programs on PC so
that it is sharable and accessible with Window setting.
Note) The share folder must be named with English one byte characters.
the case of Windows7/8
Open the properties of
the folder you want to share
on a personal computer, (A)
then press “share”(A) button.
Press “Share”(B) button on
the following screen.
(C)
Set also permissions level(C)
if you need something such
as writing on this share folder.
(B)
2/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
1. Setup of a share folder on PC
(A)
the case of Windows XP
Open the properties of the folder
you want to share on a personal
computer, then select (B)
“Share this folder”(B) in “Sharing”
tab(A) .
Set also “Permissions”(C) if it is
(C)
necessary.
3/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
2. Setting of MAPPS parameter / Setting of NETWORK DRIVE
Setting of MAPPS parameter
Change MAPPS parameter to make the network drive I/O valid.
No.1340=1
Set the network drive function after setting MAPPS parameters.
1. Press F5 key [COMM. SETNG].
The network function selection
screen is displayed as shown right.
Note) Depending on the MAPPS II/III/IV
setting, it may not be possible to
select some items.
4/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
2. Setting of MAPPS parameter / Setting of NETWORK DRIVE
2. Enter “4” with the data entry keys.
The MORI-DSN FUNCTION
SETTING screen is displayed,
as shown right.
3. Make settings for each item.
For more details, see the section
right (A to E).
5/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
2. Setting of MAPPS parameter / Setting of NETWORK DRIVE
4. Make settings for each item.
For more details, see the section below (A to E).
A) NETWORK DRIVE Function
Select VALID to be available network drive I/O.
B) COMPUTER NAME/IP ADDRESS
Set the computer name or IP address of the PC having the share folder.
C) Share Folder Name
Set the name of the share folder.
The case of Windows7/8: The case of Windows XP:
Set a folder name in the following red box. Set a share name.
6/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
2. Setting of MAPPS parameter / Setting of NETWORK DRIVE
D) User Name
Set a user name to access the share folder. The name must be a user
name of an account accessible to the share folder, such as Administrator
in PC having the share folder.
In the case of a domain account, first input the domain name.
*ex [domain¥user]
<Note> Make sure to use an account with password set.
E) PASSWORD
Set a password of a user to access the share folder, which is for an
account accessible to the share folder, such as Administrator in PC
having the share folder.
5. Press F9 key [SET].
After setting, the NETWORK DRIVE is mapped automatically.
7/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
3. Setting of COMMUNICATION PARAMETERS
Change the communication parameters after setting the network drive
function.
1.Press function key[SETTING]
and input “64”.
So the “Communication
parameters” screen is displayed.
2. Select [NETWORK] and press
F9 key [SET].
Next push F6 key [EXECUTE]
and it is completed.
8/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
4. Input and Output
PROG “PROGRAM LIST” SCREEN
To input-output data, press F1 “PROG.LIST” to open “PROGRAM
LISET” SCREEN, and press F3 “PUNCH/READ”. When “NETWORK”
at “I/O DEV.” and “Q:” at “FOLDER” are displayed, I/O of network drive
is available.
9/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
4. Input and Output
CAPS “CONVERS. PROGRAM LIST” SCREEN
To input-output data, open“CONVERS.PROGRAM LIST” and press
F9 “PUNCH” or F10 “READ”. When “NETWORK Q:” is displayed,
I/O of network drive is available.
10/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
4. Input and Output
SYSTEM “INPUT/OUTPUT” SCREEN
To input-output data, open“INPUT/OUTPUT” SCREEN, and press F9
“PUNCH” or F10 “READ” When “NETWORK” and “Q:” are
displayed, I/O of network drive is available.
11/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
4. Input and Output
MEDIA VIEWER
Display Media Viewer screen and press F9 key [MEDIA CHANGE].
So you can select NETWORK DRIVE (Q:).
12/12 Setting Procedure of Network Drive Function
April, 2014 Control Software Development Dept.
