Table of contents Page

● Safety precautions 1
● Installation 6
Parts 6
Product specifications 7
Installation requirements 8

Operation manual of front load washing machine

WASHING MACHINE Unpacking the washing machine 10
Removing the shipping bolts 11
ES-FW105SG Adjusting the adjustable feet 12
ES-FW85SG Water inlet installation 13
ES-FW70EW Positioning the drain hose 14
● Before using the washing machine 15
Inspection and preparation before washing 15
Using methods of detergents and additives 17
● Operations 18
Control panel 18
Simple steps to start 19
Program overview 19
Operation manual Available options list 21
Function buttons 22
Thank you for purchasing our product. Icons 22
Setting mode 23
● Maintaining the washing machine 24
Please read this manual carefully before use. Cleaning the detergent dispenser 24
Please read "Safety precautions"carefully
before use. Cleaning the enclosure 24
Please keep this manual in a safe place. Drum clean 25
Our product is specially designed for household
use only.
Cleaning the drain pump filter 25
Cleaning the water supply valve filter 27
Handling a frozen washing machine 28
Storing the washing machine 28
● Troubleshooting 29
Problems and solutions 29
Error messages description 32

EC②_2
Safety precautions
To ensure your safety, proper operation, and long service life, read this manual
carefully, and follow the instructions when installing, operating, and maintaining the
washing machine.
We are not liable for any damages resulting from improper use.
Keep this manual in safekeeping so that it can be referred to at any time when needed.
There are precautions marked with symbols such as "Warning" or "Caution" throughout
this manual. However, those precautions do not cover all possible conditions and/or
situations that may occur.

Important safety symbols and precautions

Meanings of icons and symbols in this manual:

Hazards or unsafe practices that may result in severe personal injury,

death or property damage.
WARNING

Hazards or unsafe practices that may result in personal injury or

property damage.
CAUTION

General precautions about this product

● This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not play with the appliance.
● Children of less than 3 years should be kept away unless continuously supervised.
● If the supply cord is damaged, it must be replaced by the manufacturer , its service
agent, or similarly qualified persons in order to avoid any possible hazards.
● Ventilations openings must not be obstructed by a carpet or any similar objects.
● This washing machine is intended to be used in household only and not in applica
tions such as:
− Staff kitchen areas in shops, offices and other working environments
− Farm houses
− By clients in hotels, motels and other residential type environments
− Bed and breakfast type environments
− Areas for communal use in blocks of flats or in launderettes
● Use a new water supply hose for connection to the water faucet. Reusing old hoses
can cause a water leak and subsequent property damage.

1
Safety precautions

Precautions about installation

● Never attempt to operate the washing machine if it is damaged, malfunctioning,
partially disassembled, or has missing or broken parts, including a damaged cord or
plug.
● The installation of the washing machine must be performed by a qualified technician
or service company.
− Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
● Periodically check the water supply hose for expansion, kink, breakage, tear, and
water leak. Replace the hose promptly if there is any abnormality.
● Do not store or install the washing machine in unsuitable places such as:
− Damp places (such as a bathroom)
− Oily or dusty places
− Places subject to weathering conditions (such as direct sunlight, wind, rain, or
temperature below freezing)
● Do not use an electric transformer.
− This may result in electric shock or fire.
● This washing machine must not be installed behind a lockable door, a sliding door or
a door with a hinge on the opposite side to that of the washing machine, in such a
way that a full opening of the door of washing machine is restricted.
● This washing machine is equipped with a power cord having a grounding function.
Use them to ensure that the machine is grounded properly. In the event of malfunction
or breakdown, grounding will reduce the risk of electric shock by providing a path of
least resistance for electric current.
● Plug the power cord firmly into a professional AC power outlet with voltage of
AC 220V-240V, frequency of 50 Hz. If connected to an inappropriate power source,
electric shock or fire may result.
● Ensure that the power plug is plugged into an appropriate socket outlet and ground-
ed in accordance with all local codes and ordinances.
● Improper connection of the equipment-grounding conductor can result in risk of
electric shock. Check with a qualified electrician or service personnel if you are in
doubt as to whether the washing machine is properly grounded.
● Do not modify the plug attached to the washing machine. If the plug cannot match
the socket, a suited one should be installed by the manufacturer, product and service
agent or qualified person.
● Plug the power plug into the wall socket so that the cord is running towards the floor.
If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
● Do not allow the washing machine to contact or be close to any heat source (such as
heater, mosquito coil, candle, cigarette, hair dryer, etc.) or inflammable material.

2
Safety precautions

Precautions about operation

● Do not attempt to repair the washing machine by yourself. Repairs made by inexperi--
enced or unqualified persons may make more serious damage to the washing
machine and cause personal injury.
● Do not repair or replace any part of the washing machine. All repairs and servicing
must be performed by qualified service personnel unless specifically recommended
in this User Manual.
● Use only authorized factory parts.
● Do not touch the power plug with wet hands. Doing so may cause electric shock
hazard.
● Do not unplug the power plug while an operation is in progress. Plugging the power
plug into the wall socket again may cause a spark and result in electric shock or fire.
● Unplug the power plug when the washing machine is not being used for long periods
of time or during a thunder or lightning storm. Otherwise there is a risk of electric
shock or fire.
● Pets and children may climb into the washing machine. Keep children away from the
washing machine while it is in use.
● Do not leave the machine door open. Children may hang on the door or crawl inside
the washing machine, causing damage or injury.
● Never reach into the washing machine while it is operating. Wait until the drum has
completely stopped.
● In case of flood, disconnect the power plug, turn off the water supply faucet, and
contact the after-sales service department. There is a risk of electric shock.
● Do not push down the door excessively when the machine door is open.
● Do not touch the door while the washing machine is operating in high temperature.
● Before you open the door of the washing machine, check if the drum has been
drained. Do not open the door if you can still see water.
● Do not open the washing machine door by force while it is operating (high-tempera-
ture washing/spinning). Otherwise, water flowing out of the washing machine may
cause burns, or injury by causing the floor to be slippery.
In addition, the door cannot be opened for user's safety, and opening the door by
force may result in damage to the product or injury.
● Do not insert your hand or a metal object under the washing machine while it is
operating. Doing so may result in injury.
● Make sure not to get your finger (and especially children's finger) caught when opening
or closing the door. Doing so may result in injury.
● Keep the water inlet faucet open when washing. Otherwise, the washing procedure
may not function properly.
● Do not stand on the washing machine or place objects (such as laundry, lighted
candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the washing
machine.
Doing so may result in electric shock, fire, problems with the product, or injury.
● Keep all washing detergents, softener and bleach away from children.
● Do not use a strong acid cleanser as a laundry detergent.

3
Safety precautions
● Do not use gasoline, alcohol, dry cleanser or other flammable or explosive substanc-
es as a laundry detergent.
● Use household detergents which are available on the market and applicable to
machine wash only.
● Make sure that the pockets of all clothing to be washed are empty. Hard, sharp
objects such as coins, safety pins, nails, screws, or stones can cause extensive
damage to the washing machine.
● Do not wash the clothing with hasp or other heavy metals.
● Do not wash the clothing soaked in or stained with gasoline or other flammable,
explosive or toxic substances. There is a risk of fire or explosion.
Wash the clothing aforesaid manually in hot water and an extra amount of detergent
first, and ensure that all those liquid, solid and particle traces are removed before
putting it into the washing machine. Hazardous substances include acetone, alcohol,
gasoline, kerosene, certain liquid household cleanser and detergent, turpentine, wax,
and wax remover.
● Do not wash or spin any items other than normal chothes or sheets, namely as
follows:
− Rugs, mats, pet blankets, woolen bedding, sleeping bags
− Thick clothings such as fishing vests, ski pants, diaper covers, or sweat suits
− Waterproof sheets such as rain covers or car covers
● Do not wash thick or hard mats even if the washing machine mark is on the care
label. This may result in injury or damage to the washing machine, walls, floor, or
clothing due to abnormal vibrations.
● Do not wash throw rugs or doormats with rubber backing. The rubber backing may
come off and stick to inside the drum, and this may result in malfunction such as a
drainage error.
● Insert the laundry into the washing machine completely so that the laundry does not
get caught in the door. If laundry gets caught in the door, it may result in damage to
the laundry or the washing machine, or result in a water leak.
● Ensure that the rubber seal and front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.). If a foreign substance is caught in the door
or the door is not completely closed, it may cause a water leak.
● Do not wash large laundry items such as bedding in the washing net. There is a risk
of injury due to abnormal vibrations.

4
 Safety precautions

Precautions about maintenance

● Cleaning and user maintenance shall not be made by children without supervision.
● When unplugging the power cord, grip the power plug firmly and pull it straight out of
the socket outlet. Pulling the power cord may damage it and result in a short-circuit,
fire and/or electric shock.
● Do not use the a strong acidic cleaning agent for cleaning the washing machine.
● Do not use benzene, thinner or alcohol to clean the washing machine. Otherwise
there is a risk of discolouration, deformation, damage, electric shock, or fire.
● Remove all foreign substances such as dust or water from the power plug terminals
and contact points using a dry cloth on a regular basis. Otherwise there is a risk of
electric shock or fire.

Protecting the environment

● This washing machine is manufactured from recyclable materials. If you decide to
dispose of this washing machine, please check local waste disposal regulations. Cut
off the power cord so that the washing machine cannot be connected to a power
source. Remove the door so that animals and small children cannot get trapped inside
the washing machine.
● Do not exceed the detergent quantities recommended in the detergent manufacturer's
instructions.
● Use stain removal products and bleaches before the wash cycle only when strictly
necessary.
● Save water and electricity by only washing full loads (the exact amount depends upon
the program used).

5
Installation

Strictly observe the relevant installation procedures in the manual to ensure that you use
the washing machine safely.

Parts
Unpack your washing machine and inspect it for shipping damage. Also make sure that
you have received all items shown below. If the washing machine was damaged during
shipping or you do not have all items,contact the place you purchased immediately.

Power plug

Top panel

Detergent/ Softener dispenser

Control panel

Drain hose

Door

Drain pump filter

Drain tube
Adjustable feet
Filter cover

Accessories

Spanner Cold water inlet hose Operation manual Hose guide Bolt caps

(1) (1) (1) (1) 7.0kg, 8.5kg model: (4)

10.5kg model: (5)

This washing machine must be connected to the water supply by a new

hose (please use the inlet hose accompanying with this washing
machine). No old hose is allowed.
CAUTION

6
Installation
Product specifications

Model ES-FW105SG ES-FW85SG ES-FW70EW

Rated capacity 10.5 kg 8.5 kg 7.0 kg

Rated voltage 220 V - 240 V~ 220 V - 240 V~ 220 V - 240 V~

Rated frequency 50 Hz 50 Hz 50 Hz

Water pressure 0.03 - 0.8 MPa 0.03 - 0.8 MPa 0.03 - 0.8 MPa

Rated heating washing power 1950 W 1300 W 1300 W

Spin speed(Maximum) 1400 rpm 1200 rpm 1000 rpm

External dimensions 598 × 680 × 850 mm 598 × 560 × 850 mm 598 × 510 × 850 mm
(W x D x H )

Net weight 76 kg 58 kg 56 kg

7
Installation
Installation requirements

Power supply

● To avoid the unnecessary risk of fire, electric shock or personal injury, all electrical
circuit and grounding must be set as per the national electrical standard.
● Do not overload the wall power socket.
● Ensure that your power supply unit can meet the normal load requirements of the
washing machine.
● The power cord has to be positioned so that it will not be stepped on, pressed or
clamped by the article on or next to it. Pay special attention to the power cord of plug,
socket and power cord contact of the washing machine.
● Do not use an extension cord or double adapter.
● Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician
to install a proper outlet.

Water supply

● The working water pressure of the washing machine is 0.03MPa~0.8MPa. When the
water pressure is below 0.03MPa,the water supply valve may not work normally,or
the time of water supply is longer than that of program control,and the display screen
shows "E01".
● The water supply faucet must be less than 122cm away from the rear of the washing
machine so that the water supply hose can be easily connected to the washing
machine and the water faucet.
● The washing machine shall be close to the water faucet.
● Turn off the water faucet when the washing machine is not used.
● Check water leakage conditions of the internal loop regularly.
● Before using the washing machine, first check all connections of the water supply
valve and water faucet to prevent water leakage.

8
Installation
Installation requirements

Installation location

● Do not position the washing machine on a platform or a structure with weak support.
● To make the most of the washing machine, position it on a hard, flat and clean surface
without any water or oil.
● Avoid direct sunlight, with adequate ventilation.
● Room temperature shall not fall below 0 ˚C.
● Avoid positioning the washing machine near heat sources such as coal or gas stove.
● Do not correct any unevenness in the floor by placing pieces of wood or other material
under the washing machine.
● Clearance of 25mm is required for top, right, and left side. For rear, 51mm is required.

25
51

25 Unit: mm

25

Ambient temperature

The washing machine cannot be positioned in a place where water freezes easily,
because some water may be left in the water valve, drainage pump and water hose.
Freeze in the pipeline may cause damage to the belt, drainage pump and other parts.
The washing machine should be positioned in the environment with ambient
temperature of 0˚C~40˚C and relative air humidity below 95% (when the temperature is
25˚C), thus the washing machine can be used in a convenient and safe way.

9
Installation

Unpacking the washing machine

● After remove the carton box and transport materials, lift up the machine and
remove the foam mattress. Please make sure the foam mattress is not stuck
to the bottom.
● If need to lay down the machine to remove foam mattress, please protect the
side surface of machine, and lay it down on its side. Please do not lay down
the machine on front/back surface.

Foam mattress

10
Installation

Removing the shipping bolts

Before using the washing machine, you must remove all shipping bolts from the back
of the washing machine. To remove the shipping bolts:

Loosen all shipping bolts with the spanner.

Fixing belt

Shipping bolt

Note:
Certain models only
have 4 shipping bolts.

Take each bolt head and pull it out from

the hole. Repeat the same process for all
shipping bolts.

Fill the holes with the supplied bolt caps.

Keep the shipping bolts for future use.

● Packing materials can be dangerous to children; keep all packing
materials (plastic bags,foamed plastic,shipping bolts,etc.) well out of
the reach of children.
WARNING ● Do not cut off the fixing belt of the drain hose.

● Do not remove the screw fixing the belt of the drain hose.
11
Installation
Adjusting the adjustable feet

If the floor is uneven,adjust the adjustable feet of the washing machine.

Do not insert pieces of wood or any other objects under the feet.

Turn left to loosen the feet nuts with the

Spanner
spanner.

Feet nuts

Adjustable feet

Adjust the adjustable feet until it is at the desired height, turn counter
clockwise for higher and turn clockwise for lower.

Adjust the feet higher Adjust the feet lower

Adjustable feet Adjustable feet

Tighten the feet nuts with the spanner.

Feet nuts

Check if the adjustable feet is leveled.The washing machine is level

when four feet do not shake relative to the ground.The steps you can
follow:

1.Press the two diagonal corners at the top of the

washing machine with your hands to check if the
washing machine still shakes. The two diagonals
have to be checked.

2.If the washing machine still shakes,the feet must be

readjusted.

12
Installation
Water inlet installation

Tap selection
The front end should be longer than 10mm.
The tap exit end face should be flat and smooth, if not file it to avoid leakage.
Suitable tap Not suitable tap
Mo m
10m
re t
han

Connect the inlet hose connector to the tap

1. Press down the slider and remove the inlet hose connector from the inlet hose ,
like below illustration 1.
2. Loosen the four bolts on the inlet hose connector till the tap can be accessed, then
set the inlet hose connector in the tap, see illustration 2.(if the tap caliber is too large and
could not set the inlet hose end, unscrew the four bolts and take out the bushing, tap exit
end must be flat, otherwise it will leak, see illustration 3)

Inlet hose connector

Bolt
Slider
Screwdriver
Bushing

Inlet hose

Illustration 1 Illustration 2 Illustration3

3. Fasten the four bolts on the inlet hose connector evenly, see illustration 4.
4. Twist the nut as the illustration, see illustration 5.
NoteBef ore twisting the nut, the threading is about 4mm above the upper surface of the nut, after twisting,
the threading is less than 2mm above the upper surface of the nut, see illustration 6.
Before twisting,about 4mm
After twisting,less 2mm

Nut

Illustration 4 Illustration 5 Illustration 6

13
Installation

If you are using a screw type of water tap, use the

provided screw-type adaptor to connect to the water
tap as shown.

Positioning the drain hose

Ensure the drain hose is fixed, and the position does not move or become loose,
otherwise it will cause leakage and property loss.
The end of the drain hose may be positioned in three ways:

1.Over the edge of a wash basin:

The end of the drain hose must be placed at lower
than 90cm from the ground. To avoid the influence of
max. 90cm

the drain hose bending on water flow, secure it over

the edge of the wash basin with a hook or a piece of
string to prevent the drain hose from moving.

2.In a floor drain directly:

Please ensure the drain hose height from the floor
max. 90cm

drain is less than 90cm.

Note: the end of the drain hose cannot be immersed in
water.

3.In a sink drain hose branch:

The end of the drain hose is connected to a sink drain
hose branch. The highest point of the drain hose must
be lower than 90cm.
max. 90cm

14
Before using the washing machine

Inspection and preparation before washing

To prevent the fault of washing machine and the damage to laundry,you have to pay
attention to the following items.

1. Sort the laundry according to soil, color and lint.

● Cotton laundry shall be turned inside out and washed
separately,or other laundry may be stained with dust,lint,etc.
● Before washing,please check that if black laundry and
cottons are turned inside out and washed separately since
they are easily stained with lint of different colors when
washed together.

2. Take objects out from the pocket.

● Please check and empty the pockets of the laundry. Hard
objects such as decorations and coins may damage the
washing machine or result in abnormal fault.

3. Before washing the laundry,take off the metal decorations and zip up the
laundry,buckle the collar,then turn the laundry inside out.
● Before washing jeans and overalls with hard objects such as
zippers and buttons, they should be closed or buttoned up.
Winter jacket,overalls, bedspread,jeans etc. shall be washed
separately.
● Clothes shall be straightened out before putting into the
washing machine; curtains with hooks shall be washed after
the hooks are taken off. Laundry with buttons or embroidery
shall be washed after the laundry is turned inside out.
● Please take off the decorations on the clothes before washing
since they may damage the laundry. All kinds of strings shall be
properly tied since they may twine other laundry.

15
Before using the washing machine

4. Small articles such as underwear must be washed in a washing mesh bag.

● Underwear with metal hooks should be washed in a washing
mesh bag to prevent the metal from rupturing through the
underwear to damage the laundry and inner drum.
● Small articles such as stockings are recommend to be
washed in a washing mesh bag (available in market) to
prevent them from falling into the door seal.

5. Pre-wash areas such as white stockings, collars, cuffs in advance.

● Please wash the areas in advance such as cuffs, collars, and
pockets with a brush before machine washing.
● Please use powder or liquid detergents. Soap residues may
remain in the seams of the clothes or in the washing drum
when washing with soaps.

6. Before washing,please confirm if there are stains on the laundry.

● Do not place the laundry in the washing machine for a long
time since they may get mildew and stains.
● Confirm if the laundry washed for the first time are fading.
Wipe the inconspicuous tails of the laundry with a white
towel stained with detergent to see if the towel is dyed with
the color of the laundry.

7. Clean dust,sludge and hairs of the pet attached on the laundry.

● Friction of dust and sludge with the laundry may damage the
clothes and affect washing results.

8. To protect the skin of the baby.

● Baby's laundry (baby's clothes and towels) such as diapers
shall be washed separately. Try to avoid washing with the
laundry of adults.

16
Before using the washing machine
Using methods of detergents and additives
Softener drawer—Softener

● During the last rinsing, softeners in the

Main wash drawer
detergent drawer will be poured automatically.
● The amount of liquid detergents shall not
Softener drawer
exceed “MAX” base line.
Prewash drawer ● Do not put powder or liquid detergents in the
softener drawer.
Prewash drawer—Powder detergent

If you select the program with the pre-wash

function, please put a little powder
detergent in the prewash drawer and
Main wash drawer—Washing powder or liquid appropriate amount of powder detergent in
the main wash drawer. Powder detergent in
Liquid detergent accessory the prewash drawer can clean part of dirt on
the laundry, then powder detergent or liquid
detergent in the main wash drawer can
MAX
clean the laundry at a deeper level to save
the detergents.
● When using the liquid detergents, put the ● Never open the detergent box when

detergent accessory in site B. the washing machine is running.

CAUTION ● Use “low foam” detergent specific to
“MAX” base line the drum washing machine.
● Do not use excess detergent, or too many
foams will affect rinsing effect or cause
functional fault.
MAX
● Refer to the instructions of detergent
manufacturer,and use proper detergent based
● The amount of liquid detergents shall not on the type, color, water temperature, degree
exceed “MAX” base line. of stain etc. of the clothing to be washed.
● Using right amount of detergent helps
achieve good washing effect and protect
the environment.
● Do not use capsule detergent.
MAX
● If you use liquid detergent in a reservation
or pre-washing function, it may get harden.
Do not use liquid detergent.
● Do not put in liquid detergent accessories ● If detergent spills over parts except for
when using powder detergent. detergent dispenser, wipe it away
immediately with wet cloth, or it may result
in damage.
17
Operations
Control panel

5 6

4 3 2 1

1 Power button
● Press this button to turn on or off the washing machine.

2 Start / Pause button

● Press this button to start or pause the program.
● If a temporary stop of the program is needed, press Start / Pause.

3 Manual setting buttons

● Several options and functions can be customized. For more information on
each option, see page 22.
● Available options vary depending on the program.

4 Program button
● Press this button to select program.

5 Program name
● Select the program according to the type of laundry.
● The indication of selected program will blink.

6 Display
● The display shows the settings (temperature, times), estimated remaining time, options,
status, and error codes. For more information on indication, see page 32.

NOTE

• Washing machine is automatically turned off when there is no operation in the last 5 minutes.
• Do not touch the control panel with wet handsor with gloves, bandages etc.
Touch directly with finger.
• Do not apply any sharp objects to the control panel in order to operate the washing machine.

18
Operations

Simple steps to start

1
2 3 4

1. Press Power to turn on the washing machine.

2. Press PROGRAM (see page 19,20) to select program.
3. Set options (TEMP., RINSE, etc.) as necessary. Available options differ depending
on the selected program.
4. Press Start/Pause.

Program overview

Proper Max Max

Program Description
Temperature spin speed load

● Suitable for washing normally or slightly 1400 rpm 10.5 kg

soiled cotton textiles, linen bed sheet, 40 °C
COTTON 1200 rpm 8.5 kg
linen table cloth, underwear, towels, (Cold to 90 °C)
shirts, etc. 1000 rpm 7.0 kg

● Suitable for washing normally soiled 1400 rpm 10.5 kg

clothes. 60 °C
*ECO 1200 rpm 8.5 kg
● This program consumes less energy (Cold to 90 °C)
and water. 1000 rpm 7.0 kg

● This program finishes within 15 minutes.

20 °C 400 rpm
SUPER QUICK ● Suitable for washing slightly soiled 2.0 kg
(Cold to 40 °C) (all models)
clothing.

1400 rpm 10.5 kg

● Suitable for clothing that only needs
RINSE+SPIN rinsing or to be rinsed once more by - 1200 rpm 8.5 kg
using fabric softener.
1000 rpm 7.0 kg

● Suitable for washing wools that are 30 °C 800 rpm

WOOL 2.0 kg
machine washable. (Cold to 40 °C) (all models)

19
Operations

Proper Max Max

Program Description
Temperature spin speed load

1400 rpm 10.5 kg

● This program washes clothing
effectively to last softener scent. The 40 °C
SCENT 1200 rpm 8.5 kg
clothing will be soaked in water with (Cold to 90 °C)
softener.
1000 rpm 7.0 kg

● This program is to remove allergen such 1400 rpm 4.0 kg

as house mite using steam.
● Suitable for washing cotton, linen, and
ALLERGY 60 °C 1200 rpm
other daily clothes.
● Steam process is installed in the 3.0 kg
program and cannot be deselected. 1000 rpm

● This program is to wash heavily soiled

1400 rpm 4.0 kg
clothing and remove allergen such as
house mite.
60 °C
HYGIENE ● Prewash process and Steam process 1200 rpm
(60 °C to 90 °C)
is installed in the program and cannot 3.0 kg
be deselected.
1000 rpm
● Suitable for washing cotton and linen.

● Suitable for washing bedspread, bed Cold 800 rpm

BEDDING 2.0 kg
sheet, quilt cover, etc. (Cold to 40 °C) (all models)

● This program is to clean the drum by

removing dirt and bacteria from it.
DRUM CLEAN ● Make sure the drum is empty. - - -
● Do not use any cleaning agents for
cleaning the drum.

The nominated program *ECO is recommended for normally soiled load equal to the rated capacity
in the product literature.

20
Operations

Available options list

Available Options
Program
TEMP. RINSE DELAY

COTTON ● ● ●

ECO ● ● ●

SUPER QUICK ● ● ●

RINSE+SPIN ー ● ●

WOOL ● ● ●

SCENT ● ● ●

ALLERGY ー ● ●

HYGIENE ● ● ●

BEDDING ● ● ●

DRUM CLEAN ー ー ー

21
Operations

Function buttons

TEMP.
You can select the appropriate water temperature according to the cloth.
Press repeatedly to select water temperature in sequence: cold, 20˚C, 30˚C, 40˚C,
60˚C and 90˚C.

RINSE
You can select the appropriate rinse times according to the cloth.
When "0" is selected, the clothes will not be exhausted.

DELAY
You can select preset time (delay timer).
Press repeatedly to select preset time in sequence.
When preset time is set, delay timer icon ( ) will be lit.
NOTE

• The preset time is from 3 hours to 24 hours. No preset is allowed under 3

hours.
• Clothes that are prone to static electricity are not suitable for the preset
function.
• After Start/ Pause is pressed, the time until the end of program is indicated on
Display.

Icons

Add laundry
When the icon is on, you can add cloth.
Adding laundry is acceptable in the washing or rinsing process in below.
- Water level is lower than door locking water level
- Water temperature is lower than 55˚C

Door lock
When the door lock is in the closed state, the icon is on; when the door lock is in
the open state, the indicator icon is off.

22
Operations

Child lock

Press and hold RINSE for 3 seconds, the child lock function will be turned on or off, and
the child lock indicator will turn on or off.
This function can lock all the buttons except the Power button and the child lock button.
Child lock can not be turned on when 0:00 is blinking on Display after program
operation ended.

NOTE

• Once the child lock function is turned on, this setting is memorized even after the
washing machine is turned off. When the washing machine is turned on again, the
program will resume from where it has been stopped.To operate other buttons
except Power, turn off the child lock repeating procedure explained above.

Mute

In the standby state, press and hold TEMP. for 3 seconds to turn on and off the
mute function.
When this icon is on, the machine will not output sound, except for error sounds.

Setting mode
To activate setting mode, hold down PROGRAM, TEMP., RINSE simultaneously for 3
seconds when the washing machine is turned on.Setting Mode can be activated before
program is started.

Setting mode Setting button Contents

"0" or "1" is toggled on display by pressing

RINSE.
Water level RINSE 0: standard water level (default)
1: water added than standard level
Available programs: COTTON

Reset the setting to factory setting by pressing

Factory reset DELAY
DELAY.

23
Maintaining the washing machine

Cleaning the detergent dispenser Cleaning the enclosure

Clean the detergent dispenser when Keep the washing machine clean to enhance
detergent and softener accumulate. the performance, avoid unnecessary
1. Press the release lever on the inside maintenance and increase the service life.
of the detergent dispenser and pull it Before cleaning the washing machine,the
out. Then remove accessories from machine shall be unplugged.
the drawer.
Make sure not to drop detergent
dispenser when pulling it out.
CAUTION
Release lever

Wipe the washing machine exterior with a

soft cloth and non-abrasive household
2. Wash all recesses under running water detergents.For the control panel, wipe off
and clean the drawer and recesses with with dry soft cloth.
a small brush.

3. Reinsert the accessories and replace Do not pour water on the exterior in case
the detergent dispenser into the recess; parts of the machine would be damaged.
make sure that detergent dispenser is
pushed back into place.

24
Maintaining the washing machine
Keep the washing machine clean to enhance the performance, avoid unnecessary
maintenance and increase the service life.

Drum clean
This is an auto drum clean program and can remove the possibly bred mold in the drum.
1. Turn on the water supply faucet.
2. Put appropriate amount of cleansers in the detergent drawer and close the detergent
drawer.
3.Touch the screen and select the Drum clean program.
4.Press Start/Pause button to start the Drum clean program.
● The Drum clean program cannot be used when there are clothes in the washing
machine, or the laundry or machine may be damaged.
● Ordinary detergents cannot be used for the Drum clean program.
● Only one tenth of drum cleanser amount recommended by the manufacturer shall be
used for the sake of environmental protection.
● Bleach containing chlorine may fade the laundry; be sure to use oxygen bleach only.
● Powder cleanser: Please use powder bleach or the cleanser specialized for the
inner drum of the washing machine.
● Liquid cleanser: Please use liquid oxygen bleach or the cleanser specialized for the
inner drum of the washing machine.

Cleaning the drain pump filter

Before cleaning and maintenance, please pull the power cord out from the socket.
Clean the drain pump filter 5 to 6 times a year is recommended; or when you see the
"E03" error message on the display clean the filter.

1.Open the filter cover of the washing 2. Pull out the drain tube, pull the stopper,
machine. let water flow to a container.

25
Maintaining the washing machine

3. Unscrew the pump filter by turning left 4. Wash any residue and stain from the filter
and drain off all the water. and make sure the inside of the drain
pump is not blocked.

5. Reinsert the drain pump filter. 6. Install the drain pump filter by turning
right and close the filter cover .

Don't unscrew the drain pump filter when the machine is in operation
or when hot water is flowing out.
WARNING ● Make sure the filter is replaced into the machine when the cleaning is
finished. Otherwise,fault or water leakage may occur.
● Make sure the filter is assembled in place.
● In case of emergency, drain water with this procedure.

26
Maintaining the washing machine

Cleaning the water supply valve filter

You should clean the supply valve filter from time to time or when you see "E01" error
message on the display:

1. Pull out the power plug and turn off the 4.Clean the inside and outside of the threaded
water supply faucet of the washing connector.
machine.

2. Unscrew the water supply hose from 5.Push the filter back into the original place.
the back of the machine.

3. With a pair of pliers, gently pull out the 6.Reconnect the water supply hose.Turn on
water supply valve filter from the valve the faucet and make sure the connections
connector and rinse it under water until are watertight.
clean.

27
Maintaining the washing machine

Handling a frozen washing machine

If the temperature drops below 0˚C and your washing machine is frozen,you can:

warm water 1.Wrap up the faucet with the towel soaked in warm water
and pour warm water on it to unfreeze the water supply
hose.

2.Remove the water supply hose and soak it in warm

water.

3.Pour warm water into the washing machine drum and

warm water
let it sit for 10 minutes.

4.Reconnect the water supply hose to the water faucet

and check if the water supply and drain operations are
normal.
● When using the washing machine again,please make
sure that the ambient temperature is above 0 ˚C.

Storing the washing machine

If you need to store your washing machine for a long time,please drain the residual
water out from the machine. Otherwise,the residual water will remain in your washing
machine for a long time and damage your machine.
1. Select RINSE+SPIN, and set RINSE times to 0 to drain the water in the drum.
2. Pull out the drain tube, pull the stopper, let water flow to a container.
3. Turn off the water faucet and separate the water supply hose.
4. Unplug the washing machine and open the machine door to allow ventilation.

28
Troubleshooting
Problems and solutions

Phenomenon Solution

• Check if the water pressure is sufficient when washing.

Detergent is left in the
• Check if the detergents are put in the injection port of the
detergent dispenser after
body drawer.
a program is finished.
• Check if the washing powder are damp and caking.

The pre-wash detergents • Check if the washing program with the pre-wash function is
in the detergent dispenser
selected.
do not flow into the drum

• Check if the washing machine is set on an uneven surface. If

the surface is uneven, adjust the adjustable feet to level the
washing machine.
Washing machine • Check if the shipping bolts are removed.
vibrates or is too noisy
• Check if the washing machine is touching any other objects.
• Check if the laundry load is balanced in the inner drum of the
washing machine.

The displayed washing time • There is deviation in the weight of laundry, watery supply time
deviates from the actual
and balancing time.
washing time

The drainage pump has • Check if the drainage pump filter is blocked by laundry flocks
abnormal noise and clean the drain pump filter timely to erase the noise.

• Make sure the washing machine is plugged in.

Washing machine does • Make sure to press Start/Pause to start the washing machine.
not start. • Make sure Child Lock is not activated.
• Check the fuse or reset the circuit breaker.

• Fully open the water tap.

Water supply does not • Make sure the door is properly closed.
start, or is insufficient. • Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufficient water pressure.

29
Troubleshooting

Phenomenon Solution

• Make sure the drain hose is straightened all the way to the
drain system. If you encounter a drain restriction, call for
service.
• Make sure the drain pump filter is not clogged.
• Close the door and press or tap Start/Pause. For your
Washing machine does safety,the washing machine will not tumble or spin unless
not drain and/or spin. the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system
that is not clogged.
• If the washing machine is not supplied with sufficient power,
the washing machine temporarily will not drain or spin.
• As soon as the washing machine regains sufficient power, it
will operate normally.

• Press or tap Start/Pause to stop the washing machine.

• It may take a few moments for the door lock mechanism to
disengage.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain
Door does not open. the drum and open the door manually.
• Make sure the door lock light is off. The door lock light turns
off after the washing machine has drained.
• Check the washing machine is in cooling, and the door lock
cannot be opened until the cooling is over.
• Check the washing machine is in working, and the door lock
cannot be opened until the motor stop.

• Make sure the door is properly closed.

• Make sure all hose connections are tight.
Water is leaking. • Make sure the end of the drain hose is correctly inserted
and secured to the drain system.
• Avoid overloading.
• Use “low foam” detergent to prevent oversudsing.

30
Troubleshooting

Phenomenon Solution

• Because there is Fuzzy control in your machine, it can

inspect the balance when spinning. In order to protect the
machine, when the clothes is unbalance, it will expend the
spinning time or reduce speed to keep the clothes balance,
Spin time is extended/ or spin in a lower speed.
Spin speed is low. • When there are excessive foams, the time on the display
will cease for a spell, meanwhile the machine is eliminating
the foams rather than fault, and the machine will
automatically return to normal program if finished.

• Make sure you use the recommended types of detergent as

There are excessive foams.
appropriate.
Foam is left in gasket after • Use“low foam” detergent to prevent oversudsing.
a program is finished. • Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.

• Check if control panel is clean. Wipe off water or dirt with soft
cloth. Remove stickers or tapes.
• Touch the panel directly with finger. Operating with gloves,
Button does not respond.
bandages, nails, or other sharp objects does not respond.
• Press the center of the button.
• Do not take your finger off the button immediately.
• Check if multiple buttons are not pressed.

18:88 is indicated on • Hold PROGRAM and Power simultaneously for 3 seconds

Display when the washing when 18:88 is indicated on Display.
machine isturned on

31
Troubleshooting

Error messages description

Error code Code description Solution

● Check whether the water tap for water supply is opened.

Abnormal
● Clean the filter cover of water inlet valve.
water supply
● Check the water pressure.

Abnormal door ● Check if the door is opened and make sure the door is closed
lock firmly.

● Check whether the drain hose is clogged.

Abnormal
● Clean the filter cover of drainage pump.
draining
● Check whether the drain hose is installed correctly.

● The clothes have too large eccentricity or get tangled; arrange

Imbalance alarm them in order and put them in the drum.
● Add more clothes for washing.

There is ● Turn off power and pull out power plug.After waiting for 1
possibility of minuteplug the power plug turn the washing machine on.
**:number malfunction

If after trying solutions, and trouble is not solved, contact with the after-sales service department.

32