Jato® (Model 55077-3) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

Air Filters 5522G Complete Exo-Carbon Kit, Jato® (includes rear & mid-chassis
battery covers, receiver cover, dirt guards, suspension arms,
5265 Air f ilter housing/ f oam insert/ Jato® air f ilter base (long, straight)/ front bumper, & fuel tank cap)
cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) 5527 Dirt guards, chassis (lef t & right)
5261 Air f ilter inserts, f oam (3) (pre-oiled) (TRX® 2.5, 2.5R, 3.3)
5527G Dirt Guards, left & right, Exo-Carbon finish (Jato)
5263 Oil, air f ilter 5560 Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/
Bearings & Bushings 5581
4x18 BCS (2)/ f lat-head engine mount screws 3x10 (2)
Gaskets, dif f erential/transmission
4609 Ball bearings (5x10x4mm) (2) (metal shielded, f or clutch bell)
4611 Ball bearings (5x11x4mm) (2) (metal shielded, f or clutch bell) 5559 Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75
degree) (1 each)
5119 Ball bearings, blue rubber sealed (10x15x4mm) (2)
5524 Receiv er box cov er (f or chassis top plate)/ battery cov er (mid chassis)
5124 Ball bearings, blue rubber sealed (4x7x2.5mm) (2)
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
5524G Receiver cover (chassis top plate), Exo-Carbon finish (Jato®)
5114 Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
5516 Roll hoop/ EZ-Start® plug mount
5123 Bellcrank bushings (plastic) (4x7x2.5mm) (4)
5583 Rubber plugs, charge jack, two-speed adjustment (Jato)
2545 Bushings (plastic) (5x8x2.5mm) (4)
5519 Serv o mounts, steering (lef t & right)
Body & Accessories 3038 Wiring harness, on-board radio sy stem (includes on/of f switch and
1926 Antenna caps, vinyl (2)/ antenna spool charge jack) (Jato)
5526 Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
Clutch & Related Parts
5526R Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools 4609 Ball bearings (5x10x4mm) (2)
1726 Antenna, tube (1)/ v iny l antenna cap (1)/ wire retainer (1) 4611 Ball bearings (5x11x4mm) (2)
3935 Body clip (mounting clip), angled, 90-degrees (10)
4118 Clutch bell, (18-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
3935A Body clip (mounting clip), angled, 90-degrees (black) (10) (requires #4609 - ball bearings, 5x10x4mm (2))
1834 Body clips (12) (standard size) 4120 Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
5514 Body mount, f ront (requires #4611-ball bearings, 5x11x4mm (2)
5511 Body, Jato® (clear, requires painting)/window, lights decal 4122 Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
sheet/ wing and aluminum hardware (requires #4611-ball bearings, 5x11x4mm (2))
5511R Body, Jato® 3.3, ProGraphix® (replacement for the painted 4124 Clutch bell, (24-tooth)/ 5x8x0.5mm f iber washer (2)/ 5mm E-clip
body) Graphics are painted, requires paint & final color (requires #4611-ball bearings, 5x11x4mm (2))
application. 4146X Clutch shoes (2)/ spring (T-Maxx®/Rev o®/Jato®/Nitro 4-Tec®)
5511T Body, Jato®, orange (painted, decals applied) 3281 Cone, split bev eled
5511A Body, Jato®, red (painted, decals applied) 1633 E-clips/ C-rings
5513X Decal sheet, Jato® 3.3 6542X Flywheel (large, knurled for use with starter boxes)
2514 Decal sheet, racing sponsors 5244 Fly wheel nut (TRX® 2.5, 2.5R, 3.3)
9950 Official Team Traxxas® racing decal set (flag logo/ 6-color) 6542 Fly wheel with magnet (35mm)
5512 Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm 1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
f langed NL (3))

Brake Components Differential Components

5119 Ball bearings, blue rubber sealed (10x15x4mm) (2)
5588 Brake cam 5580 Cov er, dif f erential
5567 Brake cam lev er/ linkage rod/ bellcrank/ 4mm ball screw (1)/ 4mm ball
5136X Differential oil kit (50cc of 1 each: 10K, 30K, 50K weights)
cup (1)/ 3.0NL (1)/ 3X10 SS (1)
5581 Gaskets, dif f erential/transmission
5564 Brake disc (semi-metallic material)
5582 Gear set, dif f erential (output gears (2)/ spider gears (2)/ spider gear
5565 Brake pads (2)/ brake disc hub/ 3X15 CS (partially threaded) (2)/2mm shaf t)
pin (1)/ 4mm e-clip (1)
5579 Gears, dif f erential 38-T (1)/ dif f erential driv e gear 20-T/ side cov er
5566 Input shaf t (slipper shaf t)/ slipper shaf t spacer
plate (1)/ gasket (1)/ output gear seals (x-ring) (2)/ 2.5x8mmCCS (4)/
5568 Linkage set, throttle & brake (Jato®) (includes serv o horn, rod guides, 5x10x.5mmTW (2)
brake spring, brake adjustment dial, rods (wires), throttle return
5130 Oil, differential (100K wt) (0.7 oz (20cc))
spring, hardware)
5135 Oil, dif f erential (10K wt, 50cc)
Bumpers & Skidplates 5039 Oil, differential (500K wt, 20cc)
5515X Battery Box, bumper (rear) (includes battery case with bosses f or 5137 Oil, differential (50K wt, 50cc)
wheelie bar, cov er, and f oam pad) 2524 Screws, 2.5x8mm countersunk machine (hex driv e) (6)
5535G Bumper (front), Exo-Carbon finish (Jato®) 2577 Screws, 3x10mm button-head machine (hex driv e) (6)
5535
5520
Bumper, f ront
Bumper, rear (f or use with mid-mounted RX battery )
Driveline Components
5555 Carriers, stub axle (rear) (lef t & right)
5185 Tires, rubber (2) (fits Traxxas® wheelie bar wheels)
5555X Carriers, stub axle, (rear) 6061-T6 aluminum (titanium-anodized)
5584 Wheelie bar/ rear skid (assembled) (f its Jato, requires 5515X f or
5528 Dif f erential output y okes (2)/yoke pins M3/12.5 (2)
installation)
4976 Wheels (4)/ Axles (2), f or wheelie bar 5125 Drive cups, inner (2) (Jato®) (for steel constant-velocity
driveshafts)/ differential spider gears (2)/ gaskets, hardware
5186A Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/
5551 Driv eshaf t assembly (1), lef t or right (f ully assembled, ready to install)/
axles (2)/ rubber tires (2)
M3/12.5mm y oke pin (1)
5186 Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/
axles (2)/ rubber tires (2) 5126 Driveshaft, steel constant-velocity, Jato® (shaft only)/ drive cup
pin (1)
Chassis & Attachments 5551X Driveshafts, Jato (steel constant-velocity) (assembled with inner
5515X Battery Box, bumper (rear) (includes battery case with bosses f or and outer dust boots) (1 pair)
wheelie bar, cov er, and f oam pad) 5150 E-clips, 1.5mm (24)
3039 Battery holder, 4-cell (no on/of f switch) (f or Jato and others that use a 5550 Half shaf t set, lef t or right (internal splined half shaf t/ external splined
male Futaba sty le connector) half shaf t/ rubber boot/ metal U-joints) (assembled with glued boot) (2
5530 Bulkheads, f ront (upper & lower) assemblies)
5520 Bumper, rear (f or use with mid-mounted RX battery ) 5127 Stub axle (1) (Jato®) (for steel constant-velocity driveshaft)
5523 Chassis top plate 2754 Stub axle pins (4)
5522 Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesiv e f oam 5553 Stub axles, (rear) (2)
pad (1) 1654 Wheel hubs, hex (2)/ stub axle pins (2)
5522X Chassis, 7075-T6 aluminum (3mm) (titanium-anodized)
(machined, lighter than stock)/ adhesive foam pad (1)
Engine & Servo Mounts
5592 Clutch guard 5560 Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/
4x18 BCS (2)/ f lat-head engine mount screws 3x10 (2)

For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 211202 1202
Page 2 Jato®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model 55077-3) Parts List

4859
2547
Screws, 3x10mm f lat-head machine (hex driv e) (4)
Screws, 4x18mm countersunk machine (hex driv e) (6)
Fuel Tank & Line
5519 Serv o mounts, steering (lef t & right) 3935 Body clip (mounting clip), angled, 90-degrees (10)
3935A Body clip (mounting clip), angled, 90-degrees (black) (10)
Engine Components 3147X Fuel line (610mm or 2f t)
5238R Cooling head, PowerTune (machined aluminum, blue-anodized) 5548 Fuel tank (75cc, complete)
(TRX® 3.3), head protector (1), 3x6mm CCS (5) 5547G Fuel tank cap, Exo-Carbon finish (Jato®)
5270R EZ-Start® 2, complete sy stem with controller, driv e unit, wiring 3149A Heat shield tubing, f iberglass (2) (black)
harness 5547 Pull ring (1)/ f uel tank cap (1)/ engine shut-of f clamp (1)/ 3x10 BCS
3980 Glow plug wrench (univ ersal wrench) (1)
3232X Glow plug, super-duty (long-medium)/gasket 5549 Rebuild kit, f uel tank (includes: o-ring, grommets (2), cap spring,
5228 Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3) hardware)
5290
5211R
Piston/sleev e (matched set), wrist pin clips (2) (TRX® 3.3)
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, Fuel, Lubricants & Supplies
2.5R, 3.3) 5001 Bottle, f uel f iller (500cc)
5277 Shaf t, starter (TRX® 2.5, 2.5R, 3.3) 3232X Glow plug, super-duty (long-medium)/gasket
5170 Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3) 5148 Grease, white lithium
5263 Oil, air filter
Exhaust 5130 Oil, differential (100K wt) (0.7 oz (20cc))
5546 Hanger, metal (f or tuned pipe)/ 4x8 BCS (1)/ 3x10 BCS (1) 5135 Oil, dif f erential (10K wt, 50cc)
5540 Header, exhaust (Jato) (tubular aluminum, clear anodized) (TRX® 5136 Oil, differential (30K wt, 50cc)
2.5, 2.5R, 3.3) 5039 Oil, differential (500K wt, 20cc)
5256 O-ring, header 12.2x1mm (TRX® 2.5, 2.5R, 3.3) 5137 Oil, differential (50K wt, 50cc)
5245X Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ 5001R Rebuild kit, f uel f iller bottle (includes bottle lid (1) and dispensing tube
cable ties, long (2)/ cable ties, short (2) caps, rubber (2) (f its 8mm or 5/16" dispensing tube))
5245 Pipe coupler, molded (blue)/ exhaust def lecter (rubber, blue)/ cable 5070 Top Fuel®, 20% nitro (gallon)
ties, long (2)/ cable ties, short (2) 5020 Top Fuel®, 20% nitro (quart)
5142 Screws, 3x15mm cap-head machine (hex driv e) (with split and f lat 5080 Top Fuel®, 33% nitro (gallon)
washers) (6)
5030 Top Fuel®, 33% nitro (quart)
5485 Tuned pipe, Resonator, R.O.A.R. legal (dual-chamber, enhances
mid to high-rpm power) (for Jato®, N. Rustler®, N. 4-Tec® with Hardware
TRX® Racing Engines) 5526 Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
5483 Tuned pipe, Resonator, R.O.A.R. legal (single-chamber, 5526R Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
enhances low to mid-rpm power) (for Jato®, N. Rustler®, N. 4- 3935 Body clip (mounting clip), angled, 90-degrees (10)
Tec® with TRX® Racing Engines) 3935A Body clip (mounting clip), angled, 90-degrees (black) (10)
5541X Tuned pipe, Resonator, R.O.A.R. legal, blue-anodized (aluminum, 1834 Body clips (12) (standard size)
single chamber) (f its Jato®, N. Rustler®, N. 4-Tec®, with TRX® 5150 E-clips, 1.5mm (24)
Racing Engines)
1633 E-clips/ C-rings
EZ Start 2 & Related parts 5477 Flat wrench, 5mm (blue-anodized aluminum)
5280 Control box (complete) (EZ-Start® 2) 5478 Flat wrench, 8mm (blue-anodized aluminum)
5281 Control box battery cov er w/ belt clip (EZ-Start® 2) 3980 Glow plug wrench (univ ersal wrench)
5273 Cush-driv e elements (4) (EZ-Start® 2) 5476X Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5mm ball
4583 EZ-Start® 2 wiring harness (f or Jato®) 5475 Multi-tool (plastic)
5270R EZ-Start® 2, complete sy stem with controller, driv e unit, wiring 5158 Nuts, 2.5mm ny lon locking (12)
harness 2745 Nuts, 3mm ny lon locking (12)
5276 Gear set (complete) (EZ-Start® 2) 3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8)
5148 Grease, white lithium 1747 Nuts, 4mm ny lon locking (10)
5275 Housing set (inner, outer)/ 3x12mmBCS (5)/ 3x20BCS (1)/ motor 4147 Nuts, 5mm ny lon locking (8)
bushing (EZ-Start® 2) 1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
4581X Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin 1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
extractor (use where glow plug wire does not hav e bullet connector) 1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
5279 Motor/ pinion gear/ motor bushing (EZ-Start® 2) 1747P Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)
5211R Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, 1747A Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
2.5R, 3.3) 3229 Screws, 2.5x10mm cap-head machine (hex driv e) (6)
5169 Screws, 2.6x8mm countersunk machine (6) 2524 Screws, 2.5x8mm countersunk machine (hex driv e) (6)
5282 Screws, 3x12mm button-head machine (6) (starter attachment screws 5169 Screws, 2.6x8mm countersunk machine (6)
with threadlock) 2674 Screws, 2x6mm roundhead self -tapping (6)
2578 Screws, 3x12mm button-head machine (hex driv e) (6) 2577 Screws, 3x10mm button-head machine (hex driv e) (6)
5277 Shaf t, starter (TRX® 2.5, 2.5R, 3.3) 4859 Screws, 3x10mm f lat-head machine (hex driv e) (4)
Front Suspension 5282 Screws, 3x12mm button-head machine (6) (starter attachment screws
with threadlock)
5530 Bulkheads, f ront (upper & lower)
2578 Screws, 3x12mm button-head machine (hex driv e) (6)
5536 Caster blocks, 25-degree (left & right)/ steering blocks, 25-
2579 Screws, 3x15mm button-head machine (hex driv e) (6)
degree (left & right)
5532 Caster blocks, 30-degree (lef t & right)/ steering blocks, 30-degree (left 5142 Screws, 3x15mm cap-head machine (hex driv e) (with split and f lat
washers) (6)
& right)
2553 Screws, 3x15mm countersunk machine (6) (hex driv e)
5525 Rod ends (12)/ hollow balls (12)
2583 Screws, 3x18mm button-head machine (hex driv e) (6)
5525R Rod ends, heavy duty (Jato®/Slayer) (8)
2580 Screws, 3x20mm button-head machine (hex driv e) (6)
5529 Shim set (f or adjusting Jato roll center)/ hollow balls (f or inner camber
links) (4) 2575 Screws, 3x6mm button-head machine (hex driv e) (6)
5518 Shock tower, f ront 2554 Screws, 3x6mm cap-head machine (hex driv e) (6)
5531 Suspension arms, f ront (lef t & right) 3932 Screws, 3x6mm f lat-head machine (hex driv e) (6)
2550 Screws, 3x8mm countersunk machine (6) (hex driv e)
5531G Suspension arms, front (left & right), Exo-Carbon finish (Jato)
2535 Screws, 4x10mm countersunk machine (hex driv e) (6)
5554 Suspension down stop screws (includes 2.5mm drill bit) (limits
suspension droop, sets maximum ride height) 3937 Screws, 4x12mm button-head machine (hex driv e) (6)
5521 Suspension pin set, complete (hardened steel, f ront & rear), 3x27mm 2547 Screws, 4x18mm countersunk machine (hex driv e) (6)
(4), 3x35mm (2), 3x52mm (4) 3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)
5589X Sway bar kit (f ront and rear) (includes sway bars and linkage) 4897 Screws, set (grub) 4mm (6) (with threadlock)
5596 Sway bars (f ront) (includes sof t, medium, hard) 3967 Shoulder screws 3x10 (6) (without threadlock)
5558 Tie bars (f ront & rear) 5149 Spacers, steel (Jato® Twin-Spoke wheels, f ront) (4)
5537 Wheel spindles, f ront (lef t & right) (2) 5534 Spacers, stub axle carrier (rear)
5537X Wheel spindles, front, 7075-T6 aluminum, blue-anodized (left & 5512 Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm
right) f langed NL (3))

REV. 211202 1202

Page 3 Jato®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model 55077-3) Parts List

Radio System, Batteries & Chargers Shock Oil

3028 Adapter, Molex to Traxxas® receiver battery pack (for charging) (1) 5031 Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
1726 Antenna, tube (1)/ v iny l antenna cap (1)/ wire retainer (1) 5032 Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
6548 Battery door, transmitter (replacement f or #6516, 6517, 6528, 6529, 5033 Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
6530 transmitters) 5034 Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
3039 Battery holder, 4-cell (no on/of f switch) (f or Jato and others that use a 5035 Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
male Futaba sty le connector) 5036 Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
2914 Battery, Power Cell AA Alkaline (4) 5037 Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
3036 Battery, RX Power Pack (5-cell flat style, NiMH, 1200mAh) 5029 Shock oil bottle (60cc) (for mixing shock oil)
2919 Battery , Series 1 Power Cell 1800mAh (NiMH, 6-C f lat, 7.2V, Sub-C) 5038X Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, &
2734 Cable ties (small) (10) 80 wt premium shock oils with spinning carousel rack)
2977 Charger, DC, 2 amp (Molex) (5 - 6 cell, 6.0 - 7.2 v olt, NiMH) 1667 Silicone shock oil (30 wt), 60cc
6525 Communication link, telemetry expander 5038 Spinning carousel rack
2978
2010
Fuse, charger, 5A (2) (for #2974, 2975, 2977)
Gear set (f or 2018 serv os) Shocks (GTR)
6555 Mount, telemetry expander (fits Slash 4X4, Stampede® 4X4, 5466 Body, GTR shock (aluminum) (1)
Rally, Jato®) 5467A Body, GTR shock (aluminum, blue-anodized) (1)
6536 Mounts, RPM sensor (nitro engines)/ 3x10mm CS with split and f lat 5466X Body, GTR shock (hard-anodized, PTFE-coated aluminum) (1)
washers (2) 5467 Body , GTR shock (molded composite) (2)
6533 Receiv er, micro, TQi 2.4GHz with telemetry & TSM (5-channel) 5465 Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls
6552 Seal kit, expander box (includes o-ring, seals, and silicone (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
grease) 5464 Dust boot, shock (expandable, seals and protects shock shaft)(1
6526 Sensor, auto-detectable, temperature pair)
6527 Sensor, auto-detectable, voltage 5475 Multi-tool (plastic)
6522 Sensor, RPM (short)/ 3x4mm BCS (2) 5158 Nuts, 2.5mm ny lon locking (12)
6521 Sensor, temperature and v oltage (long) 5562 Rebuild kit, GTR composite shocks (x-rings, bladders, all pistons,
2052 Serv o case (f or 2055 serv o) piston nuts, shock rod ends) renews 2 shocks
2053 Serv o gears (f or 2055, 2056 serv os) 5469 Rod ends (GTR shocks) (6)
5463 Shaf t, GTR shock (2) (stainless)
2075R Servo, digital high-speed, metal gear (ball bearing), waterproof
2070 Servo, digital high-torque (ball bearing) 5463T Shaft, GTR shock, TiN-coated (2)
2075 Servo, digital high-torque (ball bearing), waterproof 5460 Shocks, GTR aluminum (assembled) (2) (without springs)
2075X Servo, digital high-torque, metal gear (ball bearing), waterproof 5460A Shocks, GTR aluminum, blue-anodized (fully assembled w/o
2055 Serv o, high-torque springs) (4)
2056 Servo, high-torque, waterproof (blue case) 5460R Shocks, GTR aluminum, red-anodized (fully assembled w/o
springs) (4)
6553X Telemetry expander 2.0 and GPS module 2.0, TQi radio system
5561 Shocks, GTR composite (assembled) (2) (without springs)
6550X Telemetry expander 2.0, TQi radio system (for use only with
#6551X GPS module) 5460X Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with
TiN shafts (fully assembled w/o springs) (4)
6551X Telemetry GPS module 2.0, TQi radio system (for use only with
5461 Variable damping kit, GTR shocks (includes #1, #2, #3 pistons
#6550X telemetry expander)
and stainless steel valves)
6507R TQi 2.4 GHz High Output radio system, 4-channel with Traxxas
Link™ Wireless Module, TSM (4-ch transmitter, 5-ch micro Slipper Clutch Components
receiver) 5478 Flat wrench, 8mm (blue-anodized aluminum)
6528 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 2- 5552X Rebuild kit, slipper clutch (steel disc/ f riction pads (3)/ spring (2)/ pin/
channel (transmitter only ) 4.0mm NL (1)/ 5.0mm NL (1))
6529 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3- 2554 Screws, 3x6mm cap-head machine (hex driv e) (6)
channel (transmitter only) 5556 Slipper pressure plate & hub (aluminum alloy )
6530 Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 4-
channel (transmitter only) Springs
6511 Traxxas Link™ Wireless Module 5433A Spring, shock (red) (GTR) (1.4 rate double pink stripe)
3038 Wiring harness, on-board radio sy stem (includes on/of f switch and 5434A Spring, shock (red) (GTR) (1.6 rate double blue stripe) (1 pair)
charge jack) (Jato) 5940 Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)
Ready-To-Race Model 5941
5942
Spring, shock (red) (GTR) (2.0 rate double black stripe) (1 pair)
Spring, shock (red) (GTR) (2.3 rate double purple stripe) (1 pair)
55077-3 Jato® 3.3: 1/10 Scale 2-Speed Nitro-Powered 2WD Stadium Truck
with TQi™ 2.4GHz Radio Sy stem, Traxxas Link™ Wireless Module, 5434 Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)
and Traxxas Stability Management (TSM)® 5427 Spring, shock (white) (GTR) (front 0.7 yellow) (1 pair)
5428 Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)
Rear Suspension 5432 Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)
5555 Carriers, stub axle (rear) (lef t & right) 5429 Spring, shock (white) (GTR) (rear) (1.0 rate tan) (1 pair)
5555X Carriers, stub axle, (rear) 6061-T6 aluminum (titanium-anodized) 5431 Spring, shock (white) (GTR) (rear) (1.2 rate silver) (1 pair)
5559 Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 5430 Spring, shock (white) (GTR) (std. f ront) (1.1 rate green) (1 pair)
degree) (1 each) 5433 Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)
5525 Rod ends (12)/ hollow balls (12)
5525R Rod ends, heavy duty (Jato®/Slayer) (8) Spur Gears & Clutch Bells
5529 Shim set (f or adjusting Jato roll center)/ hollow balls (f or inner camber 4118 Clutch bell, (18-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
links) (4) (requires #4609 - ball bearings, 5x10x4mm (2))
5517 Shock tower, rear 4120 Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
5534 Spacers, stub axle carrier (rear) (requires #4611-ball bearings, 5x11x4mm (2)
5553 Stub axles, (rear) (2) 4122 Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip
5533 Suspension arms, rear (lef t & right) (requires #4611-ball bearings, 5x11x4mm (2))
4124 Clutch bell, (24-tooth)/ 5x8x0.5mm f iber washer (2)/ 5mm E-clip
5533G Suspension arms, rear (left & right), Exo-Carbon finish (Jato®)
(requires #4611-ball bearings, 5x11x4mm (2))
5554 Suspension down stop screws (includes 2.5mm drill bit) (limits
2554 Screws, 3x6mm cap-head machine (hex driv e) (6)
suspension droop, sets maximum ride height)
5521 Suspension pin set, complete (hardened steel, f ront & rear), 3x27mm 3956 Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
(4), 3x35mm (2), 3x52mm (4) 3957 Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)
5589X Sway bar kit (f ront and rear) (includes sway bars and linkage) 3958 Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)
5597 Sway bars (rear) (includes sof t, medium, hard) Steering Components
5558 Tie bars (f ront & rear) 5123 Bellcrank bushings (plastic) (4x7x2.5mm) (4)
5557 Tie bars (rear) (3 & 5-degree toe adjustment) 5544 Bellcrank posts (steering)(2)
Recoil Starter 5542X Drag link, machined 6061-T6 aluminum (blue-anodized)/ 5x8x2.5
5277 Shaf t, starter (TRX® 2.5, 2.5R, 3.3) ball bearing (2)
5170 Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)

REV. 211202 1202

Page 4 Jato®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model 55077-3) Parts List

5355X Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall 5576R Tires & wheels, assembled, glued (All-Star chrome wheels,
offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), Anaconda® tires, f oam inserts) (nitro rear/ electric f ront) (1 lef t, 1
1.17mm (2) right)
5545 Serv o horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends 5575 Tires & wheels, assembled, glued (Twin-Spoke wheels, Victory
(2)/ hollow balls (2) tires, foam inserts) (nitro front) (2)
5545X Servo horns, steering and throttle (for non-Traxxas® servos 5573 Tires & wheels, assembled, glued (Twin-Spoke wheels, Victory
(Hitec, JR, KO, Airtronics)) tires, foam inserts) (nitro rear) (2)
2055 Serv o, high-torque 5569 Tires, Alias 2.8" (soft-compound) (rear) (2)/ foam inserts (2)
5543 Steering bellcranks/ serv o sav er/ serv o saver spring/ steering 5578 Tires, Anaconda® 2.8" (2)/ f oam inserts (2)
support/ 4x7x2.5 PB (4)/ 5x0.8mm NL (1) 4790R Tires, Pro-Trax spiked 2.2" (soft-compound)(rear) (2)/ foam
5542 Steering drag link/ 3x10mm shoulder screws (without threadlock) (2) inserts (2)
5594 Turnbuckle, aluminum (red-anodized), camber link, 58mm (1) 5563 Tires, ribbed 2.8" (front) (2)/ foam inserts (2)
(assembled with rod ends and hollow balls) (see part 5539X for 5570 Tires, Victory 2.8" (rear) (2)/ foam inserts (2)
complete set of Jato aluminum turnbuckles) 4174 TRX® Pro-Star chrome wheels (2) (front) (for 2.2" tires)
5595 Turnbuckle, aluminum (red-anodized), front toe link, 61mm (1) 4172 TRX® Pro-Star chrome wheels (2) (rear) (for 2.2" tires)
(assembled with rod ends and hollow balls) (see part 5539X for 1654 Wheel hubs, hex (2)/ stub axle pins (2)
complete set of Jato aluminum turnbuckles) 1654X Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle
5539X Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ pins (2)
front toe links, 61mm (2) (assembled with rod ends and hollow 5577A Wheels, All-Star 2.8" (black chrome) (nitro front) (2)
balls)/ aluminum 5mm wrench (red-anodized)
5576A Wheels, All-Star 2.8" (black chrome) (nitro rear/ electric front) (2)
5538 Turnbuckles, toe-links, 61mm (f ront or rear) (2) (assembled with rod
5577 Wheels, All-Star 2.8" (chrome) (nitro f ront) (2)
ends and hollow balls)
5576 Wheels, All Star 2.8" (chrome) (rear) (2)
Suspension Linkage 5572 Wheels, Twin-Spoke 2.8" (chrome) (nitro rear/ electric front) (2)
5529X Ball studs, aluminum, hard-anodized, PTFE-coated (4) (use for
inner camber link mounting)
Transmission Components
5119 Ball bearings, blue rubber sealed (10x15x4mm) (2)
5355X Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall of f set
hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2) 5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
5525 Rod ends (12)/ hollow balls (12) 5592 Clutch guard
5581 Gaskets, dif f erential/transmission
5525R Rod ends, heavy duty (Jato®/Slayer) (8)
5521 Suspension pin set, complete (hardened steel, f ront & rear), 3x27mm 5585 Gear set, two-speed (2nd speed gear, 29T/ input gear, 17T steel)
(4), 3x35mm (2), 3x52mm (4) 5586 Gear, 1st speed 32T/ input gear 14T
5591 Gearbox halv es (right & lef t)
5594 Turnbuckle, aluminum (red-anodized), camber link, 58mm (1)
(assembled with rod ends and hollow balls) (see part 5539X for 5566 Input shaf t (slipper shaf t)/ slipper shaf t spacer
complete set of Jato aluminum turnbuckles) 5593 Primary shaf t/ 1st speed hub/one-way bearing/ snap ring/ 5x8x0.5
5595 Turnbuckle, aluminum (red-anodized), front toe link, 61mm (1) TW
(assembled with rod ends and hollow balls) (see part 5539X for 5583 Rubber plugs, charge jack, two-speed adjustment (Jato)
complete set of Jato aluminum turnbuckles) 5593X Single speed conversion kit (eliminates the 2-speed, makes Jato
5539X Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ race legal).
front toe links, 61mm (2) (assembled with rod ends and hollow
balls)/ aluminum 5mm wrench (red-anodized)
Traxxas Tools
5539 Turnbuckles, camber links, 58mm (assembled with rod ends and 3433X Body reamer (aluminum handle)
hollow balls) (2) 3433 Body reamer (plastic handle)
5538 Turnbuckles, toe-links, 61mm (f ront or rear) (2) (assembled with rod 3436 Cap, body reamer
ends and hollow balls) 3432 Scissors, curved tip

Team Traxxas Items

3431 Scissors, straight tip
8712 Speed Bit Essentials Set, hex and nut driver, 7-piece, includes
2514 Decal sheet, racing sponsors premium handle (medium), travel pouch, hex drivers (straight:
6160X DVD, Maxx® Power! Full Throttle Action (sleeve) 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm,
9950 Official Team Traxxas® racing decal set (flag logo/ 6-color) and 8.0mm), 1/4” drive
9909 Traxxas® racing banner, red & black (3x7 feet) 8722 Speed bit handle, premium, medium (rubber overmold)

Throttle & Brake Linkage 8710 Speed Bit Master Set, hex and nut driver, 13-piece, includes
premium handle (medium), travel pouch, hex drivers (straight:
5588 Brake cam 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm,
5567 Brake cam lev er/ linkage rod/ bellcrank/ 4mm ball screw (1)/ 4mm ball 3.0mm), and nut drivers (4.00mm, 4.50mm, 5.00mm, 5.50mm,
cup (1)/ 3.0NL (1)/ 3X10 SS (1) 7.00mm, 8.00mm),
5568 Linkage set, throttle & brake (Jato®) (includes serv o horn, rod guides, 8711 Speed Bit Master Set, hex driver, 7-piece straight and ball end,
brake spring, brake adjustment dial, rods (wires), throttle return includes premium handle (medium), travel pouch, hex drivers
spring, hardware) (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm,
5545X Servo horns, steering and throttle (for non-Traxxas® servos 2.5mm, 3.0mm), 1/4" drive
(Hitec, JR, KO, Airtronics)) 8719 Speed Bit Master Set, nut driver, 6-piece, includes premium
4056 Spring, throttle return (2) (Jato®, T-Maxx® 2.5R, 3.3) handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm,
Tires & Wheels 8716
5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4"
4607 Ball bearings (5x11x4mm) (8) drive
4611 Ball bearings (5x11x4mm) (2) 8716X Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm,
1974 Lite-wheels, dished (2) (front) (for 2.2" tires) 3.0mm), 1/4" drive
1972 Lite-wheels, dished (2) (rear) (for 2.2" tires) 8715 Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm,
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8) 2.5mm), 1/4" drive
1747 Nuts, 4mm ny lon locking (10) 8715X Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm,
1747R Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) 2.5mm, 3.0mm), 1/4" drive
1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) 3415 Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm,
1747T Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) 3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut
1747P Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4) drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips,
1747A Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/
5149 Spacers, steel (Jato® Twin-Spoke wheels, f ront) (4) driver handle
2754 Stub axle pins (4) Turnbuckles & Threaded Rods
3777A Tires & wheels, assembled, glued (All-Star black chrome wheels, 5477 Flat wrench, 5mm (blue-anodized aluminum)
Anaconda® tires, foam inserts) (nitro front) (1 left, 1 right) 5545 Serv o horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends
3776A Tires & wheels, assembled, glued (All-Star black chrome wheels, (2)/ hollow balls (2)
Anaconda® tires, foam inserts) (nitro rear/ electric front) (1 left, 1
5594 Turnbuckle, aluminum (red-anodized), camber link, 58mm (1)
right) (assembled with rod ends and hollow balls) (see part 5539X for
5577R Tires & wheels, assembled, glued (All-Star chrome wheels,
complete set of Jato aluminum turnbuckles)
Anaconda® tires, f oam inserts) (nitro f ront) (1 lef t, 1 right)

REV. 211202 1202

Page 5 Jato®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model 55077-3) Parts List

5595 Turnbuckle, aluminum (red-anodized), front toe link, 61mm (1)

(assembled with rod ends and hollow balls) (see part 5539X for
complete set of Jato aluminum turnbuckles)
5539X Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/
front toe links, 61mm (2) (assembled with rod ends and hollow
balls)/ aluminum 5mm wrench (red-anodized)
5539 Turnbuckles, camber links, 58mm (assembled with rod ends and
hollow balls) (2)
5538 Turnbuckles, toe-links, 61mm (f ront or rear) (2) (assembled with rod
ends and hollow balls)

Two-Speed Components
5119 Ball bearings, blue rubber sealed (10x15x4mm) (2)
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
5585 Gear set, two-speed (2nd speed gear, 29T/ input gear, 17T steel)
5586 Gear, 1st speed 32T/ input gear 14T
5590 Primary clutch assembly (two-speed shif t hub)
5583 Rubber plugs, charge jack, two-speed adjustment (Jato)

If you have questions or need technical assistance, call Traxxas at:

1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)

For orders, calls outside the U.S., and other information, call 972-549-3000,
or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
TRAXXAS.com

REV. 211202 1202