1.
Avoid abbreviation in paper title such as EPS
2. Abstract lacks key findings. Its better to show the results metric.
3. Rearrange keywords by alphabetic order
4. Need to mention the percentage increase in this sentence “increasing the compressive,
flexural, and split tensile strengths [28, 29]”
5. The impact testing are not only used to check the vulnerability of structures against
cyclones/storms, rather as directly or indirectly its used for many structural assessments of
buildings. Please revise these sentences after thoroughly studying the purpose of these testing’s.
6. The literature review is insufficient in terms of scope and comprehensiveness, as it does not
adequately situate the work within current breakthroughs and discussions in related
technologies. This limitation may restrict its relevance and applicability to modern engineering
difficulties. The urelement literature must be updated with following
7. IN Figure2b, what is the core made of? What design code have been used? Revise paper for
these details. If the core is Foam materials, how are steel studs connected to it?
8. What the potential application of such panels? Such information must be provided in
introduction.
9. State the limit value here “deflections must remain within the allowable limits” Also cite relevant
code reference.
10. Provide material properties and gradation curves.
11.
