UV Disinfection
Ultraviolet Solutions
Effective Dose
The reactors in the ATECPOOL UV ranges are dimensioned according to the pump flow rate, as it is the
combination of the contact time in the reactor and the power of the lamp(s) that will ensure that the
necessary dose (expressed in millijoules per square centimeter or mJ/cm2 ) sufficient to kill 99.9% of the
micro-organisms (bacteria, viruses, algae, etc.).
ATEC Neo Series UV Sterilizers - Specifications
• Drastically reduces chemical use by 50% • Power supply: 120/240V / 50 - 60Hz
• Sterilizes micro-organisms that chlorine and salt systems can’t • PVC reactors
• No nasty chlorine smell • Ballast: electronic
• No more red eyes, dry skin or damaged hair • Pressure gauge: yes
• Easier pool maintenance, simple, reliable • Indoor / outdoor installation: yes
• Prolongs pool & equipment life • Plumbing options: D 75
• Environmentally friendly • Pressure 3 Bar
ATEC Neo 12
• Compatible with all types of coatings and filters
• Compatible with all pool chemical treatments
• A treatment that can be automated with an existing chlorinator
Neo Series Specification
Max Flow UV dose at Max Flow UV dose at UV Lamp Height of Diameter of Connection
Rate flow rates Rate flow rates reactor Reactor
Feature (m³/h) (mJ/cm²) (m³/h) (mJ/cm²) (W) (mm) (mm)
Atec Neo 12 12 30 6 60 1 x 55 773 212 D 75
Atec Neo 18 18 30 9 60 1 x 87 1019 212 D 75
Atec Neo 25 25 30 12.5 60 1 x 105 1273 212 D 75
TREATMENT
WATER
ATEC UV & HO Series Stainless Steel Reactor - Specifications
• Specially adapted reactors made from mirror-polished 316L stainless steel, optimized with UV-C
lamps using state of the art technology with high-intensity (HO) performance.
• Very long lamp service life (up to 13.000 hr)
• Dedicated electronic ballast guaranteeing maximum lamp UV efficiency and integrated control
• Single-base lamps and patented sealing system for an easy maintenance
• Lamp operating indicator light for each lamp
• Insignificant pressure loss
• Inlet / outlet connections using unions supplied
• Power supply: 120/240V / 50 - 60Hz
• Maximum operating pressure: 3 bar
• Inlet/outlet connection as per selection of UV dose
UV & HO Stainless Steel Reactors Specification
Max Flow UV dose at Max Flow UV dose at UV Lamp Height of Diameter of
ATEC UV-40 Rate flow rate Rate actual flow rates Reactor Reactor
Feature (m³/h) (mJ/cm²) (m³/h) (mJ/cm²) (W) (mm) (mm)
ATEC UV-10 7 30 3.5 60 1 x 33 426 150
ATEC UV-20 12 30 6 60 1 x 55 696 150
ATEC UV-30 20 30 10 60 1 x 87 942 150
ATEC UV-40 25 30 12.5 60 1 x 105 1196 150
UV-3000 HO-N 33 30 16.5 60 3 x 87 1004.6 150
UV-3205 HO-N 45 30 22.5 60 3 x 87 1040 205
UV-4205 HO-N 65 30 32.5 60 4 x 87 1040 205
UV-5205 HO-N 85 30 42.5 60 5 x 87 1040 205
UV-6205 HO-N 95 30 47.5 60 6 x 87 1040 205
UV-6273 HO-N 130 30 65 60 6 x 87 1040 273
Note: The performance of these devices have been calculated at the end of the lamp’s life and with a transmission of 98%.
Contact our professional team for other flow rates.
atecpool.com 229
