Minetruck MT436LP

Underground truck with 32.6-tonne load capacity

1
 Reliable underground
haulage for low seam
operations
The front seated canopy places the operator Dump box adapted for low seam mining Minetruck MT436LP is equipped with a
Minetruck MT436LP is an underground truck with a 32.6-metric tonne load in a comfortable, spring suspended seat with with a lower and slightly wider design. powerful and reliable engine installation
capacity. It has been designed to work in low seam mining applications where controls easy to reach and read. with Jacob’s brake.
the back height can get down to 2.8 m.

Main benefits
Safety first Minetruck MT436LP is an articulated underground truck,
designed with workers wellbeing as a primary concern

Ergonomically designed for fast and efficient preventive maintenance and

service and a cabin which allows the operator to work safe and comfortable

Maximum productivity thanks to the well-tested, reliable systems and

components which has been continually refined on the easy to operate
Minetruck MT436LP

Dump box designed with durable, wear-

Right hand side camera
Door with heavy duty latch and resistant materials for greater longevity
protective guard on opening

ISO ROPS and FOPS certified

Rear-view camera

Equipped with safety lock’s for

articulation and dump box
Four-wheel, fully enclosed, multiple wet disc
brakes with force oil-cooled SAHR brakes
2 3
 Technical specifications  = Standard  = Option Technical specifications  = Standard  = Option

Features Specifications Operator’s compartment Control system

Capacities Forward seated canopy with steering wheel (ISO ROPS and FOPS)  Rear and right hand side cameras with display in canopy 
Safety Tramming capacity 32 650 kg Open door retainer  Audio-visual reverse alarm 
Motion times
• ISO ROPS and FOPS certified front seated canopy Spring seat suspension seat with 2-point retractable seat belt  Speedometer 
Dumping 14 sec
• SAHR brake system with durable components for reliability External sound level according to ISO 6395 LwA 123 dB(A) Blockout 3rd and/or 4th gears 
Weights (standard empty vehicle)*
and cost efficiency Sound level in canopy according to ISO 6394 LpA 104 dB(A) Certiq - telematics system* 
Approximate weight 30 600 kg
• Rear, and right hand side camera and monitor for driver Whole body vibration value according to EN 14253 A(8)w maximum in range of 0.5 to *Certain country restriction may exist
Axle load, front end 20 500 kg 2m/s² (typical value for similar machines).
assistance
Axle load, rear end 10 100 kg
• Box up stand and articulation lock for safe work on the machine System
Comfort Hydraulic system
Ansul manually activated fire suppression system with engine shut down 
Engine Heavy duty gear type pumps
• Low profile adapted front seated canopy with focus on safety  Hand held fire extinguishes 
and reduced operator fatigue Standard System pressure: 15.8 MPa  Wiggins fast fuel fill 
Brand/model: Cummins QSM11 EPA Tier 3
Sustainability Hydraulic tank capacity: 238 litres  Wiggins fast fill for engine oil 
Power rating 298 kW/400 hp @ 2100 rpm
Filtration, return line: 4 μm 
• Engine compression brake to reduce braking heat and extend Maximum torque 1 898 Nm @ 1 350 rpm
brake longevity Electric pump for hydraulic tank fill, 24 V 
MSHA Part 7 ventilation rate 396 m³/min Main frame
• Electric transmission shift control for convenient shifting Manual pump for hydraulic tank fill 
MSHA Part 7 particulate index 311 m³/min Lock on articulation and raised dump box
Chrome plated stems on cylinders

• Converter lockup for more efficient energy transfer, less heat 
Tier III/EU Stage IIIA: Dry type air filter, catalytic purifier and silencer, exhaust heat
Optional box sizes 
and longer component life protection, cooling package with tube type radiator, remote engine oil and cooling
fuel drain. Wheel chocks and brackets 
• Durable articulated hinge that adjusts automatically with
Transmission Knockdown construction 
heavy-duty, tapered roller bearings to absorb stress
Full power shift, 4 speed forward/reverse  Central manual lubrication system 
• High-intensity LED lights for great visibility and long life Fuel
Brand/model: Dana 6000 series  Central automatic lubrication system 
Productivity Fuel tank capacity: 439 litres 

• 32.6 metric tonne capacity Fuel filtration, primary, including water trap: 8μm 
Fuel filtration, secondary: 3µm  Converter Power unit
• Articulated steering results in great manuoverability
Converter; single stage with lock-up  Arctic oil 
• Proven power train components for reliable productivity,
low running cost and a longer life Brand/model: Dana CL-8000 series Block heater (240 V) 
Axles 
Corrosion resistant radiator 
Serviceability Brand/model: Okubo Rock Tough 508 
Brakes
• Filters and service points are easy to reach Degree of front axle oscillation: 18° (9° on each side) 
Fully enclosed, force-cooled, multiple wet discs at each wheel end  Parts and services
• Centralized manual lubrication for easier maintenance Differentials: front open 
Service/parking/emergency brakes: SAHR  Preventive maintenance kits 
Differentials: rear open 
Engine compression brake  Repair and rebuild kits 
Tires Brake apply after 4 sec in neutral  Upgrade kits 
Electric brake release pump  Telematics (Certiq) 
Tubeless tires design for underground mine service 
Tire size front and rear: 26.5R25 
*As applications and conditions vary; Epiroc recommends that the user consults with
tire suppliers to obtain the optimum tire selection.

Electrical system
System voltage: start and accessories 24 V 
Mine duty high output alternator: 140 Amps 
Isolation switch lockout 
24/12 V converter 
Driving lights LED: 10x40 W 
Tail and brake lights 
Load lights, mounted on back of canopy 
Side light - opposite operator 
Front and rear red lights 
Detachable service light (required for CE approved vehicles) 
Amber strobe light - power on 

4 5
 Technical specifications Technical specifications
Grade performance
Standard configuration, box empty
Measurements and weights
% Grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Turning radius Dimensions
Ratio Grade – – – – 1:12 1:10 1:8 1:7 – – 1:5
• All dimensions are shown in
millimetres
1st gear 5.5 5.5 5.5 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.3
• All dimensions shown are
2nd gear 9.8 9.7 9.7 9.7 9.6 9.6 9.5 9.5 9.4 9.4 9.3 based on standard vehicle
Km/h
3rd gear 17.3 17.1 17.0 16.9 16.7 16.6 16.0 14.7 13.4 12.0 – configuration with 25   mm tire
4th gear 30.7 30.2 29.8 27.4 23.8 – – – – – – deflection, unloaded
R 4 372
Standard configuration, box loaded

W
% Grade 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 R 8 570

3
35
3
Ratio Grade – – – – 1:12 1:10 1:8 1:7 – – 1:5

1st gear 5.5 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.2 5.2 5.0
2nd gear 9.7 9.6 9.5 9.4 9.4 9.0 8.1 7.2 6.2 – –
Km/h
3rd gear 17.1 16.8 16.3 13.6 – – – – – – –
4th gear 30.0 24.5 – – – – – – – – –

5 492

4 655
*These are theoretical calculations and should be seen as a reference only. Lock up engaged and 3% rolling resistance assumed. Actual performance may vary depending on
the application. Continuous operation is recommended on maximum 1:7 grade.

3 090
42.5º

Side view

59°

5 190
(H1)

MT436B

2 190 2 250
(H2)

1 790 (H3)
12º
290

243 5 020 3 430

(H4)

10 182

Dump boxes
Dump boxes STD

Vollume, SAE heaped 12.5 14.5 17 18.5

Volume, semi heaped 10.5 12.5 14.8 16.8

Vollume, SAE struck 8.7 10.5 12.6 14.5

Maximum material density (t/m3) 2.6 2.2 2.0 1.8

Dump position: box height, max (mm) H1 5 045 5 070 5 190 5 300

Loading position: height side board (mm) H2 2 012 2 040 2 190 2 320
Height rear end (mm) H3 1 635 1 635 1 790 1 790
Dump position: clearance (mm) H4 160 162 242 242

Width (mm) W 3 050 3 050 3 355 3 355

*Teletram box has a different functionality, different dimensions affecting turning radius etc., more sizes can be available, please consult Epiroc for more information.

6 7
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and

Count on Epiroc to deliver the solutions you need to

Inspired by innovation.

succeed today and the technology to lead tomorrow.

United in performance.
9869 0086 01A 2023-05 Örebro, Sweden. Legal Notice © Copyright 2017, Epiroc Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may
show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information.