Contents Page

1. Introduction 3
Training Calendar: 2024-2025 1.1 Background 3
1.2 Vision & Mission of BITAC 3
1.3-1.4 Advisory Committee & Editorial Committee 4
1.5-1.6 Course Conducting Committee & Governing Body of BITAC 4
2. Technical Training Program, BITAC.
2.1 Long Term Technical Training Program (Regular) 5
2.2 Customized Technical Training Program 5
2.3 Technical Training Program Addressing 4IR (Customized) 6
2.4 Short Term Technical Training Program 6
2.5 Industrial Attachment Technical Training Program 6
3. Long Term Technical Training Program (Regular), BITAC, Dhaka.
3.1 Machine Shop 7
3.2 Electrical Maintenance 8
3.3 Welding 9
3.4 Automobile & Auto-Electricity 10
3.5 Machine Maintenance 11
3.6 Foundry & Pattern Making 12
4. Technical Training Program Addressing 4IR (Regular), BITAC, Dhaka .
4.1 Computer Aided Engineering (CAE) 13
4.2 3D Printing 14
4.3 Cloud Based CNC Machining Center Operation 15
4.4 Electrical Energy Monitoring System (Installation, Operation & SCADA Visualization) 16
5. Customized Technical Training Program, BITAC, Dhaka.
5.1 Heat Treatment 17
5.2 CNC Lathe Operation and Practice 18
5.3 CNC Milling Operation and Practice 19
5.4 CNC Machining Center Operation and Practice 20
5.5 Die Sink EDM & Wire Cut EDM Operation & Practice 21
5.6 Plastic Technology 22
5.7 Auto CAD (2D&3D) 23
5.8 SolidWorks 24
6. Short Term Technical Training Program (Regular), BITAC, Dhaka. 25
6.1 Programmable Logic Controller (PLC) 25
6.2 Boiler Operation & Maintenance 26
7. 7.1-7.12 Skills for Industry Competitiveness and Innovation Program (SICIP), BITAC, Dhaka. 27-38
8. 8.1-8.4 TechnicalTraining Program Under ASSET Project 39
9. 9.1- 9.5 Self-Employment and Poverty Alleviation (SEPA), Phase-2, BITAC. 40-41
10. 10.1-10.3 Technical Training Program, BITAC- Chattogram. 42
11. Technical Training Program, BITAC- Chandpur, Khulna & Bogura. 42
12. Tool & Technology Institute (TTI), BITAC, Dhaka-1208. 43
12.1 Training Program (ASSET & Regular) 43
12.2 Customized Technical Training Program. 43
12.3 CNC Machine Operation 44
12.4 Mechatronics & PLC (ASSET) 45
Bangladesh Industrial Technical Assistance Center (BITAC) 12.5 Programmable Logic Controller (PLC) (ASSET) 46
116 (Kha), Tejgaon Industrial Area, Dhaka-1208 12.6 CNC Machining Centre Operation With CAD & CAM (Regular) 47
12.7 Programmable Logic Controller (PLC) (Regular) 48
Phone: 02-55030056 13. Industrial Attachment Technical Training Program, BITAC. 49
E-mail: trainingdhaka@bitac.gov.bd, Website: www.bitac.gov.bd
1 INTRODUCTION 1.3 Advisory Committee
Chairperson : Parimal Singha
1.1 Background Director General
Bangladesh Industrial Technical Assistance Centre other-wise known as BITAC is the BITAC.
successor to Pakistan Industrial Technical Centre (PITAC). It was renamed BITAC after Member : Dr. Md. Jalal Uddin PEng.
the independence of Bangladesh. BITAC was established in 1962 by merging two other Director (Planning), BITAC.
productivity oriented public sector organizations namely IRDC & PIPS. With the : Md. Abu Sayeed Khan
establishment of BITAC practice oriented activities for productivity promotion and Director (Training), BITAC.
improvement of Productivity were created through its laboratory and workshops support.
The main objective of BITAC is therefore, promotion of the national economy through 1.4 Editorial Committee
development of product, process and skilled manpower. BITAC has Five Centres in Chairperson : Md. Abu Sayeed Khan
Bangladesh at Dhaka, Chittagong, Chandpur, Khulna and Bogra. Director (Training), BITAC.
Member : Dr.Engr. Mazharul Habib
1.2 Vision & Mission Additional Director (Training), Dhaka.
OUR VISION: : Md. Masum Zakaria
• To become the best among all technical skill human resource developers & industrial Assistant Engineer (Training), Dhaka.
spares manufactures in all aspects. : Md. Hasib Mahmud
• Empower employees for shouldering higher responsibilities resulting in job enrichment Assistant Engineer (Training), Dhaka.
and job satisfaction. 1.5 Course Conducting Committee
• Undertaking various research and development program has to explore the new and Course Advisor : Director General
innovative manufacture and use of spares parts. BITAC
Course Director : Director (Training),
OUR MISSION: BITAC
• To upgrade the skills of the industrial personnel in technical and managerial fields. Course Coordinator : Additional Director
• To disseminate modern technical know-how among industrial personnel through BITAC.
seminars, group discussions, demonstrations, publications, film show, etc.
• To extend consulting services to industrial organization and industries primarily in the
private sector.
1.6 Governing Body of BITAC
• To organize programme for capacity buildup in SME sector.
• To promote productivity consciousness in the people by encouraging them to form
productivity associations in industrial Centers etc. Rank Organization Designation at
• To co-operate with international and national organizations and agencies engaged in Governing Body
activities for increasing industrial productivity. Secretary Ministry of Industries Chairman
• To adopt such measures and take such steps and do all such things as many be condu- Additional Secretary
cive to the promotion of cordial relations between the Centre and persons interested in or Joint Secretary Ministry of Industries Member
the objectives of the Centre. (BITAC Wing)
• To secure the recognition of the Centre in Bangladesh and other foreign counties. Joint Secretary Finance Division ( Ministry of Finance) Member
• In conjunction with the upgrading programme and to make it more effective, the Director General Directorate of Technical Education Member
BITAC shall: Director General Directorate of Labor & Manpower Member
√ Assists in the design and manufacture of newly developed jigs, fixtures, gauges,
moulds,dies, punches, tools and products (proto-type0 for industries and agriculture; Director General Bureau of Manpower, Employment and Training Member
√ Develop products, processes and tools, etc. to help industries in improving the Member National Skill Development Authority
quality, increase production, reduce cost and utilizing indigenous raw materials and Member
to increase the scope of indigenous manufacture and Executive Member Bangladesh Investment Development Authority Member
√ Conduct productivity studies in such selected plants as may be determined and
President Bangladesh Engineering Industry Owners Association Member
recommend ways and means for improvement.
√ To do all such other lawful things as the Centre may think identical or conducive to President Federation of Bangladesh Chambers of Commerce and Industries Member
the attainment of any or all the objectives of the Centre mentioned above. Director General Bangladesh Industrial Technical Assistance Center (BITAC) Member
Secretary
3 4
2. SCHEDULE OF THE TECHNICAL TRAINING PROGRAM, BITAC, 2.3 Technical Training Program Addressing 4IR (Regular)
2.1 Long Term Technical Training Program (Regular)
Sl. Name of the Course Duration No. of
Sl. Name of Course Schedule Duration No. of No. (Hours) seats/Course
No. the Course No. (Weeks) seats 1 3D Printing 120
173 07 July2024 to 10Oct 2024
1. Machine Shop 174 20 Oct 2024 to 23Jan 2025 2 Computer Aided Engineering (CAE) 120
175 26 Jan 2025 to 01May 2025 14 25 Cloud Based CNC Machining Center Operation 120 5
3
176 04 May 2025 to 07 Aug 2025
4 Energy Monitoring System (Installation, 120
173 07 July2024 to 10Oct 2024 Operation & SCADA Visualization)
2. Electrical 174 20 Oct 2024 to 23Jan 2025 14 25
175 26 Jan 2025 to 01May 2025
Maintenance 04 May 2025 to 07 Aug 2025
176
173 07 July2024 to 10Oct 2024
174 2.4 Short Term Technical Training Program (Regular)
3. Welding 20 Oct 2024 to 23Jan 2025
175 26 Jan 2025 to 01May 2025 14 25 Sl. Name of Course Duration No. of
176 Schedule
04 May 2025 to 07 Aug 2025 No. the Course No. (Hours) seats/Course
173 07 July2024 to 10Oct 2024
Machine 174 20 Oct 2024 to 23Jan 2025 Programmable 71 21 Jul 2024 to 01 Aug 2024
4. Maintenance Logic
175 26 Jan 2025 to 01May 2025 14 25 72 20 Oct 2024 to 31 Oct 2024 20
176 04 May 2025 to 07 Aug 2025 Controller 70
73 26 Jan 2025 to 06 Feb 2025
173 07 July2024 to 10Oct 2024 (PLC) 04 May 2025 to 15 May 2025
Automobile & 74
174 20 Oct 2024 to 23Jan 2025
5. Autoelectrcity 26 Jan 2025 to 01May 2025 14 25
175
176 04 May 2025 to 07 Aug 2025 54 21 Jul 2024 to 25 Jul 2024
173 07 July2024 to 10Oct 2024 55 22 Sep 2024 to 26 Sep 2024
Foundry & 14 10 Boiler Operation
6. 174 20 Oct 2024 to 23Jan 2025 56 24 Nov 2024 to 28 Nov 2024
Pattern Making 175 26 Jan 2025 to 01May 2025 & Maintenance
04 May 2025 to 07 Aug 2025 57 26 Jan 2025 to 30 Jan 2025 35 20
176
58 09 Mar 2025 to 13 Mar 2025
2.2 Customized Technical Training Program 59 04 May 2025 to 08 May 2025
Sl. Name of the Course Duration (Hours) No. of
No. seats
1 Machine Shop 360 20
2 Electrical Maintenance 360 20
3 Welding 360 20

4 Machine Maintenance 360 20

5 Automobile & Auto-electricity 360 10 2.5 Industrial Attachment Technical Training Program (As per stackeholders desire)
6 Foundry & Pattern Making 360 5
7 Heat Treatment 360 5
8 Solid Works 210 20
9 Auto CAD (2D & 3D) 210 20
10 Plastic Technology 210 6
11 CNC Lathe Operation &Practice 140 4
12 CNC Milling Operation & Practice 140 4
13 CNC Machining Center Operation & Practice 140 4
14 Die Sink EDM & Wire CutEDM Operation 140 4
& Practice
6
5
3 SLONG TERM TECHNICAL TRAINING PROGRAM (REGULAR), BITAC, DHAKA.
3.1 Machine Shop 3.2 Electrical Maintenance

Name of the Course : Machine Shop Name of the Course : Electrical Maintenance [Regular]
Duration : 14 weeks Duration : 14 weeks
Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025, Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025,
26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug 26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug
2025; For course no:173, 174, 175 and 176 respectively. 2025; For course no:173, 174, 175 and 176 respectively.

Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025; Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025;
For course no: 173, 174, 175 and 176 respectively. For course no: 173, 174, 175 and 176 respectively.
Number of Seats : 25 Number of Seats : 25
Course fee : 5,000/- Course fee : 8,000/-
Target Group : Candidate having SSC or equivalent certificate Target Group : Candidate having SSC or equivalent certificate
along with technical experience, Merchant Navy along with technical experience, Merchant Navy
Cadets, Defense civilian staff (army, air force Cadets, Defense civilian staff (army, air force
and navy), TTC/VTI certificate holders, Diploma and navy), TTC/VTI certificate holders, Diploma
in Engineering. in Engineering.
Course Objects : Square, Acme, Buttress and trapeziod thread cutting, Form Course Objects : • To develop skill in domestic and industrial wiring;
turning with Form tool and by combined longitudinal and
Cross feed, Copy turning; Cam shaft, Crank shaft turning; • To make control circuit and detecting faults and
Dee hole drilling, boring and Rearming to sizes, Gear its maintenance;
Cutting; Helical, Bevel and worm gear; Cam milling;
Grinding on punch shaft to standard dimensional accuracy • To identify various electronic components and
and surface finishing; Effect to temperature of surface finish. understanding electronic circuit and making
• Understanding of mechanical engineering drawing; circuit.
• Informing different machining parameters;
• Identification on different metals. • Detecting machine faults, machine winding and
• Introducing design of tools/cutters and practicing; is repairing and maintenance;
• Make Capable of measuring using different
measuring instrument • Able of measure using various measuring tools
• Awarenss of safety and connect measuring instrument to a circuit.
Course Contents : • Technical Drawing
• Basic Tool Design Course Contents : • Electrical Wiring
• Safety & Maintenance
• Shop Theory • Control System
• Measuring Tools, Fits & Tolerances • Industrial Electronics
• Related Math. • Electrical Machine
• Engineering Materials • Measuring Tools & Electrical Instruments.
• Heat-Treatment
Training Methodology : • Class-room lecture Training Methodology : • Class-room lecture
• Group discussion • Group discussion
• Practical exercise • Practical exercise
• Demonstration • Demonstration
Evaluation System : • Observation
• Question and answer Evaluation System : • Observation
• Individual exercise • Question and answer
• Written test • Individual exercise
• Oral test • Written test
• Overall performance. • Oral test
• Overall performance.
7 8
3.3 Welding 3.4 Automobile & Auto-electricity

Name of the Course : Welding Name of the Course : Auto-electricity [Regular]

Duration : 14 weeks Duration : 14weeks
Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025, Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025,
26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug 26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug
2025; For course no:173, 174, 175 and 176 respectively. 2025; For course no:173, 174, 175 and 176 respectively.

Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025; Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025;
For course no: 173, 174, 175 and 176 respectively. For course no: 173, 174, 175 and 176 respectively.
Number of Seats : 25 Number of Seats : 10
Course fee : 7,500/- Course fee : 5,000/-
Target Group : Candidate having SSC or equivalent certificate Target Group : Candidate having SSC or equivalent certificate
along with technical experience, Merchant Navy along with technical experience, Merchant Navy
Cadets, Defense civilian staff (army, air force Cadets, Defense civilian staff (army, air force
and navy), TTC/VTI certificate holders, Diploma and navy), TTC/VTI certificate holders, Diploma
in Engineering. in Engineering.
Course Objects : • Introduction to different types of welding processes; Course Objects : • To introduc hand tools, machine tools and different
• Identification of different metals; measuring instruments;
• Preparation of different types of welding joints; • To make capable of major overhauling of auto engine;
• Welding practice at positions; electrical & electronic parts.
• Introducting different welding Parameter • Troubles shooting and corrective measures;
• Skill development in arc welding technique and gas • Dismantling and assembling of gear box and clutch system;
welding technique; • To acquaint the participants with auto parts
machining, denting and painting;
• Detecing welding defects and trouble shooting
• Reparing and maintenace of suspension and break
• Designing and making welding jigs fixtures;
system;
• Learning welding symbols;
• Selecting appropriate blue oil, fuel & tyres for
• Make capable of inspection and testing of wel joints; different types vehicles.
• Safety awareness.
Course Contents : • Basic Engine
Course Contents : • Welding Theory on Arc Welding
• Fundamental-Electricil and electronic system
• Heat Treatment
• Gas Welding/Cutting • Power Transmission System
• Safety & Mainteance • Auto-Parts Machining, Denting and painting
• Engineering Materials • Measuring Tools
• Technical Drawing Reading • Suspension, Break, Fuel & Fuel Injection Systems.
• Welding Hand tools/Measuring Tools. Training Methodology : • Class-room lecture
Training Methodology : • Class-room lecture • Group discussion
• Practical exercise
• Group discussion • Demonstration
• Practical exercise • Model demonstration
• Demonstration • Team Work
Evaluation System : • Observation
• Report writing
• Question and answer
Evaluation System : • Observation
• Individual exercise
• Question and answer
• Written test • Individual exercise
• Oral test • Written test
• Overall performance. •l Oral test
• Overall performance.
9 10
3.5 Machine Maintenance 3.6 Foundry & Pattern Making

Name of the Course : Machine Maintenance Name of the Course : Foundry Practic
Duration : 14 weeks Duration : 14 weeks
Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025, Schedule : 07 July 2024 to 10 Oct 2024, 20 Oct 2024 to 23 Jan 2025,
26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug 26 Jan 2025 to 01 May 2025and 04 May 2025 to 07 Aug
2025; For course no:173, 174, 175 and 176 respectively. 2025; For course no:173, 174, 175 and 176 respectively.

Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025; Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and 30April 2025;
For course no: 173, 174, 175 and 176 respectively. For course no: 173, 174, 175 and 176 respectively.
Number of Seats : 25 Number of Seats : 05
Course fee : 5,000/- Course fee : 5,000/-
Target Group : Candidate having SSC or equivalent certificate Target Group : Candidate having SSC or equivalent certificate
along with technical experience, Merchant Navy along with technical experience, Merchant Navy
Cadets, Defense civilian staff (army, air force Cadets, Defense civilian staff (army, air force
and navy), TTC/VTI certificate holders, Diploma and navy), TTC/VTI certificate holders, Diploma
in Engineering. in Engineering.
Course Objects : • Inroduction to different machine tools such as lathe Course Objects : • To operate induction furnace, cupola furnace,
machine, milling machine, grinding machine, tilting furnace, pit furnace coke bed furnace, sand
boring machine, planer machine, drill machine, mixing machine, overhead crane, core drier, and
hydralic and mechanical press machine, rolling use different hand tools etc;
machine, shear machine; • Understanding blue print reading
• Acquainting different types of mechanical compound • Preparation of sand for mould and core making,
and driving System; • Making mould/core, pasting, metal melting,
• Understanding of blue print reading; fettiling etc;
• Make capable of disassembly and assembly of • Identifying the different metals and alloys;
different machine tools and components; • Melting different metals, handling the liquid metal
•l Replacement of lubricants, cutting oil, o-ring, and puring the liquid metal into the mold cavity;
gasket etc; • Taking different measurement using different
• Awaraness of safety and maintenance. mesuring instruments;
Course Contents : • Machine Elements • Introducing the heat treatment processes.
• Mechanical Component and Driving System Course Contents : • Pattern Making l Casting processes
• General Maintenace • Sand mould Preparation & Practices.
• Technical Drawing Reading • Different types of furnace
• Hand tools/Measuring Tools • Melting Processes l Alloying of Metals
• Safety & Maintenace. • Safety & Mainteance
• Engineering Materials
Training Methodology : • Class-room lecture • Technical Drawing & Reading
• Group discussion • Welding Hand tools/Measuring Tools.
• Practical exercise • Heat-Treatment
• Demonstration Training Methodology : • Class-room lecture
• Group discussion
Evaluation System : • Observation • Practical exercise
• Question and answer • Demonstration
• Individual exercise Evaluation System : • Observation
• Written test • Question and answer
• Oral test • Individual exercise
• Written test
• Overall performance. • Oral test
• Overall performance.
11 12
4. Technical Training Program Addressing 4IR (Customized)
4.2 3D Printing
4.1 Computer Aided Engineering (CAE)

Name of the Course : Computer Aided Engineering (CAE) Name of the Course : 3D Printing
Duration : 4 Weeks (120 Hours) Duration : 4 Weeks (120 Hours)
Schedule : 11 Aug 2024 to 05 Sep 2024, 22Dec 2024 to16 Jan 2025 Schedule : 11 Aug 2024 to 05 Sep 2024, 22 Dec 2024 to16 Jan 2025
and 20 Apr 2025 to15 May 2025; and 20 Apr 2025 to15 May 2025;
For course no: 7th, 8th and 9th respectively. For course no: 7th, 8th and 9th respectively.

Nomination deadline : 08 Aug 2024, 19 Dec 2024and 17 Apr 2025; Nomination deadline : 08 Aug 2024, 19 Dec 2024and 17 Apr 2025;
For course no: 7th, 8th and 9th respectively. For course no: 7th, 8th and 9th respectively.

Number of Seats : 05 Number of Seats : 05

Course fee : 7,500/- Course fee : 5000/-
Target Group : B.Sc in Engineering, Diploma in Engineering, Target Group : B.Sc in Engineering, Diploma in Engineering,
or equivalent certificate with technical experience and or equivalent certificate with technical experience
computer literacy and computer literacy
l To design 3D object for CNC manufacturing
Course Objects : Course Objects : l To design 3D object for 3D Printing in CAD software
using CAD software
l To install 3D Printer and all necessary accessories
l To operate the VMC with all recommended
l To troubleshoot common 3D Printing issues
settings for manufacturing 3D object
l To use slicing software and learn G-code for 3D
l To set up static stress simulation
printers
Course Contents : l 3D Part modelling using Solidworks
Course Contents : 3D Part modelling using Solidworks
Generating CNC toolpath using Master CAM
l
l
l Detailed discussion on slicing software for FDM
l CNC Programming for vertical machining centre l 3D Printers like Ultimaker Cura and Simplify 3D
(VMC) l Hands-on practice on 3D Printer installation,
l Introduction to engineering simulation maintenance and operation
l Introduction to Cloud based CAD software
(Fusion 360)
Training Methodology : l Class-room lecture
Training Methodology : l Class-room lecture l Group discussion
l Group discussion l Practical exercise
l Practical exercise l Demonstration
l Demonstration

Evaluation System : l Attendance

Evaluation System : l Attendance l Oral Question and answer
l Oral Question and answer l Individual exercise
l Individual exercise l Written Test
Written Test
Portfolio
l
l
l Portfolio

13 14
 4.4 Electrical Energy Monitoring System (Installation, Operation &
SCADA Visualization)
4.3 Cloud Based CNC Machining Center Operation Name of the Course : Electrical Energy Monitoring System (Installation,
Operation & SCADA Visualization)
Name of the Course : Cloud Based CNC Machining Center Operation Duration : 4 Weeks (120 Hours)
Duration : 4 Weeks (120 Hours) Schedule : 11 Aug 2024 to 05 Sep 2024, 22Dec 2024 to16 Jan 2025
and 20 Apr 2025 to15 May 2025;
Schedule : 11 Aug 2024 to 05 Sep 2024, 22Dec 2024 to16 Jan 2025
For course no: 7th, 8th and 9th respectively.
and 20 Apr 2025 to15 May 2025;
For course no: 7th, 8th and 9th respectively. Nomination deadline : 08 Aug 2024, 19 Dec 2024and 17 Apr 2025;
For course no: 7th, 8th and 9th respectively.
Nomination deadline : 08 Aug 2024, 19 Dec 2024and 17 Apr 2025; Number of Seats : 05
For course no: 7th, 8th and 9th respectively.
Course fee : 7,500/-
Target Group : B.Sc in Engineering, Diploma in Engineering,
Number of Seats : 05 or equivalent certificate with technical experience and
computer literacy
Course fee : 7,500/-
Course Objects : l To Install Energy Monitoring Devices
Target Group : B.Sc in Engineering, Diploma in Engineering, l To Perform System Wiring of Electrical &
or equivalent certificate with technical experience and
computer literacy Communication network of Electrical Energy
Monitoring
Course Objects : l To design a 3D object for CNC manufacturing in l To Configuration Multifunction Energy Meter
CAD software l To Configuration Main PLC CPU of Energy

l To operate the VMC with all recommended Monitoring

settings for manufacturing a 3D object l To Configuration PC SCADA of Energy Monitoring

l To Configure Network devices of Energy

l To use production monitoring software to track
factory production and efficiency. Monitoring
l To Configure Web and Mobile Client of Energy

Course Contents : l 3D Part modelling using Solid works Monitoring

l To Monitor and Data Logging to PC SCADA Of
Generating CNC toolpath using MasterCAM
energy parameters
l

l CNC Programming for vertical machining center

(VMC) Course Contents : l Information and specifications of Energy Monitoring Software

l Introduction to cloud-based production monitoring
l PLC,IIoTGateway,Multifunctional Energy Meterand
MODBUSRTU Manual
software for CNC l Installmobile, desktop SCADA monitoring application

l Monitoring Application Configurationon SCADAPC.

l Establish PLC and monitoring app communication.

Configuration of IP Addres Remote Monitoring Monitoring System

l Configuration of API key Remote Monitoring
Training Methodology : l Class-room lecture
of Energ Monitoring System
Group discussion
Configuration of User ID and password Remote
l
l
l Practical exercise Monitoring of Energy Monitoring System
l Demonstration l ConfigurationVPN &Talk 2M webaccess Remote
Monitoring of Energy Monitoring System
l Configuration of WAN IP Remote Monitoring of Energy
Evaluation System : l Attendance
Oral Question and answer Training Methodology : l Classroom lecture
Practical Exercise
l
l
l Individual exercise l Demonstration
l Written Test
Evaluation System : Attendance
Portfolio
l
l
l Oral Question and Answer
l Individual Exercise

16
15
5. Customized Technical Training Program.
5.1 Heat Treatment
5.2 CNC Lathe Operation & Practice
Name of the Course : Heat Tratment
Name of the Course : CNC Lathe Operation & Practice
Duration : 12 weeks (360 Hours)
Duration : 4 weeks (140 Hours)
Schedule : As per Discussion
Schedule :
As per Discussion.
Nomination deadline : As per Demand.
Number of Seats : 05
Nomination deadline : As per Demand.
Trade fee : 6,000/-
Number of Seats : 04
Target Group : Candidate having SSC or equivalent certificate
along with technical experience, Merchant Navy Trade fee : 5,000/-
Cadets, Defense civilian staff (army, air force
and navy), TTC/VTI certificate holders, Diploma Target Group : BSc. in Engineering, Diploma in Engineering
in Engineering. TTC/HSC (Voc)
Trade Objects : • Demonstration and practicing on Annealing Trade Objects :
Normalizing, Hardening & Tempering. l In depth exploration of ISO as related to lathe operation;
• Inroduction to different types of heat treatment l Detail Lessons ranging from basic to advanced
furnaces; programming; techniques using ISO and a
• Acquainting with different cooling media used for representative lathe CNC control (Fagor);
different metals and their alloys; Hands on machining practice under real-life shop
•
l
Identification of different type of metals;
• Demonstration of quenching technique; environment.
• Practicing hardness measurement;
• Preparing carburizing compound;
• Demonstration on packaging of job into carburizing Course Contents : l Introduction & Basic programming.
compund.
• Awaraness of safety. l ISO Code (G & M code)
l Machine parameter & Function.
Course Contents : • Safety & Maintenance
• Engineering materials
l Different operation & ramming.
• Fundamental of Heat Treatment
Training Methodology : Class-room lecture
l•
l
Furnace Design
l Group discussion
Training Methodology : • Class-room lecture l Practical exercise
• Group discussion
• Practical exercise l Demonstration
• Demonstration
Evaluation System : l Observation
Evaluation System : • Observation l Question and answer
• Question and answer
• Individual exercise l Individual exercise
• Written test l Oral test
• Oral test
• Overall performance. l Overall performance.

17 18
5.3 CNC Milling Operation & Practice 5.4 CNC Machining Center Operation & Practice

Name of the Course : CNC Milling Operation & Practice Name of the Course : CNC Machining Center Operation & Practice
Duration : 04 weeks (140 Hours) Duration : 04 weeks (140 Hours)
Schedule : As per Discussion. .
Schedule : As per Discussion.
Nomination deadline : As per Demand.
Nomination deadline : As per Demand.
Number of Seats : 04
Trade fee : 5,000/- Number of Seats : 04
Target Group : BSc. in Engineering, Diploma in Engineering Trade fee : 7,500/-
TTC/HSC (Voc) Target Group : BSc. in Engineering, Diploma in Engineering
Trade Objects : TTC/HSC (Voc)
l In depth exploration of ISO as related to milling;
Detail Lessons ranging from basic to advanced In depth exploration of ISO as related to milling;
Trade Objects :
l
l
programming; techniques using ISO and a l Detail Lessons ranging from basic to advance
representative milling CNC control (Haidenhein programming; techniques using ISO and a
TNC-310); representative multi-axis machining center CNC
l Hands on machining practice under real-life shop control (Fanuc-21) (Haidenhein TNC-310);
environment. l Hands on machining practice under real-life shop
environment.
Course Contents : l Introduction & Basic programming.
l ISO Code (G & M code) Course Contents : l Introduction & Basic programming.
l Machine parameter & Function. l ISO Code (G & M code)
l Different operation & ramming. l Machine parameter & Function.
Training Methodology : l Class-room lecture l Different operation & ramming.
l Group discussion Training Methodology : l Class-room lecture
l Practical exercise l Group discussion
l Demonstration l Practical exercise
l Demonstration
Evaluation System : l Observation
l Question and answer Evaluation System : l Observation
l Individual exercise l Question and answer
l Oral test l Individual exercise
l Overall performance. l Oral test
l Overall performance.

19 20
 5.6 Plastic Technology
5.5 Die Sink EDM & Wire Cut EDM Operation & Practice
Name of the Course : Plastic Technology
Name of the Course : Die Sink EDM & Wire Cut EDM Operation & Practice
Duration : 4 weeks (140 Hours)
Duration : 04 weeks (140 Hours)
Schedule : As per discussion.
Schedule :
As per discussion.
As per discussion.
Nomination deadline :
Nomination deadline : As per Demand. Number of Seats : 05

Number of Seats : 04 Course fee : 4,000/-

Target Group : Entrepreneur, technical staff working in the
Course fee : 7,500/-
Plastic processing industries, TTC/VTI & disabilities.
Target Group : BSc. in Engineering, Diploma in Engineering
Course Objects : l To operate injection moulding machine,
TTC/HSC (Voc)
compression moulding machine, vacuum forming
Course Objects : l Understanding of EDM process and factors machine, extruder machine, blow moulding and
involved; ther plastic machinery;
l Rendering knowledge on die-sink & wirecut EDM l Usage and maintenance of plastic mould;
machines, their components and control systems; l Selection of appropriate plastic materials for
l Acquaintance with eletrode (Properties, materials products;
and machining), dielectric fluids (Properties,
Maintenance and controlling of plastic machinery;
function);
l

l Programming with ISO codes and a representive l Testing procedure of plastic.

control language (Robostar);
l Use of CAM and Simulation to facilitate Course Contents : l Plastic materials
programming; l Plastic Testing
l Making workable mold cavities, dies and punches l Plastic Processing machinery
Mold making
using die-sink & wire-cut EDM process.
l

l Heat Treatment
Course Contents : l Basic programming (wire cut) & operation l Electroplating
l Basic operation l Machine Control System and Maintenance.
l Application operation
Training Methodology : Class-room lecture
NC programming.
l
l
l Group discussion
My cam (software).
Practical exercise
l
l

l Case study
Training Methodology : l Class-room lecture l Industrial visit.
l Group discussion
Evaluation System : l Observation
Practical exercise
Qusetion and Answer
l
l
l Demonstration l Individual exercise
l Oral test
Evaluation System : l Observation l Overall performance.
l Question and answer
l Individual exercise
l Oral test
l Overall performance.

21 22
5.7 Auto CAD (2D & 3D) 5.8 Solid work

Name of the Course : Auto CAD (2D & 3D) Name of the Course : Solid work [Customized]
Duration : 06 weeks (210 Hours) Duration : 6 weeks ( 210 Hours)
Schedule : As per discussion.
Schedule : 07 July 2024 to 15 Aug 2024, 20 Oct 2024 to 28 Nov
2024, 26 Jan 2025 to 03Apr 2025 and 04 May 2025
to 12June 2025; Nomination deadline : As per demand.
For course no: 173, 174, 175 and 176 respectively.
Number of Seats : 20
Nomination deadline : 04 July 2024, 17 Oct 2024, 23 Jan 2025 and Course fee : 7,500/-
30 April 2025; For course no: 173, 174, 175
and 176 respectively. Target Group : BSc. in Engineering, Diploma in Engineering,
TTC/ HSC (Voc)
Number of Seats : 20
Course Objects : l Understanding and practicing of working and
Trade fee : 7,500/- assembly drawing;
l Introducing the importance of computer aided
Target Group : BSc. in Engineering, Diploma in Engineering, design (CAD);
TTC/ HSC (Voc) l Learn about innovation of desin and design

Understanding and practicing of working and modification.

Trade Objects : l
l Know about the application of solid works drowing
assembly drawing;
l Introducing the importance of computer aided
design (CAD); Course Contents : l Mechanical Drafting
Male capable of computer aided designing.
Solid works-2D
l
l

l Solid works-3D
Course Contents : l Mechanical Drafting
l Assembly drawing
l Auto CAD-2D
l Special Fitxare drawing
l Auto CAD-3D
l Component drawing Training Methodology : l Class-room lecture
l Group discussion
Training Methodology : l Class-room lecture l Practical exercise
l Group discussion l Demonstration
Practical exercise
Evaluation System : Observation
l
l

Demonstration
Question and answer
l
l

Evaluation System : l Observation l Individual exercise

l Question and answer l Oral test
l Individual exercise l Overall performance.
l Oral test
l Overall performance.

24
23
6. SHORT TERM TECHNICAL TRAINING PROGRAM, BITAC, DHAKA . 6.2 Boiler Operation and Maintenance
6.1 Programmbale Logic Controller (PLC)
Name of the Course : Boiler Operation and Maintenance
Name of the Course : Programmbale Logic Controller (PLC)
Duration : 1-week (35 Hours)
Duration : 2 -week (70 Hours)
Schedule : 21 Jul 2024 to 25 Jul 2024, 22 Sep 2024 to 26 Sep 2024,
Schedule : 21 Jul 2024 to 01 Aug 2024, 20 Oct 2024 to 31 Oct 24 Nov 2024 to 28 Nov 2024, 26 Jan 2025 to 30 Jan 2025,
2024, 26 Jan 2025 to. 06 Feb 2025 and 04 May 2025
to 15 May 2025; 09 Mar 2025 to 13 Mar 2025 and 04 May 2025 to 08 May 2025;
For course no: 71, 72, 73 and 74 respectively. For Course no: 54, 55, 56, 57, 58 and 59 respectively.

Nomination deadline : 18 Jul 2024, 17 Oct 2024, 23 Jan 2025 and 30 Apr 2025; Nomination deadline : 18 Jul 2024, 19 Sep 2024, 21 Nov 2024, 23 Jan 2025,
For course no: 71, 72, 73 and 74 respectively. 06 Mar 2025, and 30 Apr 2025;
For Course no: 54, 55, 56, 57, 58 and 59 respectively.
Number of Seats : 20
Trade fee : 7,500/- Number of Seats : 20

Target Group : Candidates having BSc. in Engineering and Course fee : 3,500/-
Graduation in Applied Physics, Diploma in Engineering Target Group : Entrepreneur, Technical staffs working in theindustries
l To describe functions and uses of PLC like Sugar Mills, Textiles, Power Plant passed at least
Trade Objects : l To develop PLC program for industrial process Class eight pass/equivalent
To modyfy existing Really Control System into PLC System Skill development on Boiler;
Course Objects :
l
l
l To install PLC system in a process plant l Hand on practice on maintenance of defferent
l To maintain and troubleshoot the PLC system. circuits like fuel circuits, water circuit;
l Developing knowledge on Acts, rules and
Course Contents : Introduction to PLC
regulations;
l

Conventional Relay Control System

Awareness on Safety and maintenance.
l
l
l Functional description of PLC
l Basic function block of PLC
l Introduction to programming Course Contents : l Water circuit
l Sensors & Actuators l Fuel circuit
l Relay types Instructions l Boiler construction
l Timer & Counter Instruction l Boiler Maintenance
l Loop creating sequencer Instruction l Safety
l Process operation by PLC at BITAC pilot plant l Troubleshooting
Act, rules & regulations
Training Methodology : Class-room lecture
l
l

l Group discussion l Inspection & regulations procedure

l Practical exercise l Control system
l Industrial visit Training Methodology : l Class-room lecture
l Demonstration l Group discussion
l Practical exercise
Evaluation System : Observation
Demonstration
l
l
l Question and answer
l Individual exercise Evaluation System : l Observation
l Oral test
l Question and answer
l Overall performance.
l Oral test
l Overall performance.

25 26
7. Skills for Industry Competitiveness and Innovation Program (SICIP), BITAC, Dhaka.
7.1 Factory Automation 7.2 Pneumatics & Hydraulics
Name of the Course : Factory Automation Name of the Course : Pneumatics & Hydraulics
Duration : 360 Hours Duration : 360 Hours
Schedule : 01 Jan 2025 Schedule : 01 Jan 2025

Application deadline : 31 Dec 2024, Application deadline : 31 Dec 2024,

Number of Seats : 20 Number of Seats : 20

Course Fee : Course Fee :

Target Group : B.Sc. Engineering /Diploma Engineering / HSC (Vocational) Target Group : B.Sc. Engineering /Diploma Engineering / HSC
/ SSC (Vocational) / TTC / SSC or equivalent. (Vocational) / SSC (Vocational) / TTC / SSC or
Age Limit: 18 to 45 Years
equivalent.
Automation is the technique that makes machine, plant Age Limit: 18 to 45 Years
and process to operate automatically. As industry becoming • To understand the principle of hydraulic and pneumatics
Course Objects :
more and more sophisticated by applying automation, Trade Objects : system.
demanding more skill people who are capable to work • To know how a hydraulic system work.
both the engineering fields. Now days it is common to • To learn about the symbol and components of
use electrical control system in mechanical engineering hydraulic and pneumatics system.
to reduce the cost and for robust and reliable operations. • To learn about hydraulic and pneumatics troubleshooting.
The goal of this course is to prepare the engineers and • To learn about hydraulic and pneumatics circuit.
technician for respond the upcoming job market. • To design simple hydraulic and pneumatics circuit.

Course Contents : l To operate in a Self-Directed Team • Apply Occupational Health & Safety (OH&S)
l To communicate in English in the Workplace Course Contents : Practice in the workplace
l To apply Occupational Health & Safety(OHS) • Perform Personal Computer (PC) Application
l Practices in the Workplace • Interpret Technical drawings and Manuals
l Electrical Sequence Circuit & Control • Carry Out Precision Checks and Measurements
l Basic Siemens PLC(SIMATIC-S7) • Apply Quality Systems and procedures
l Basic Omron PLC(SYSMAC) • Introduction to Factory Sequence ControlS
Basic LSIS PLC(XGK)
• Basic Pneumatic & Hydraulic Control
l

l Basic Mitsubishi PLC(MELSEC)

l PLC communication (SIMATIC/SYSMAC/ • Electrical Pneumatic & Hydraulic Control Application
XGK/MELSEC) • Pneumatic & Hydraulic Instruments Maintenance
l PLCPosition & ServoControl(SIMATIC/SYSMAC • Proportional Hydraulic Control
/XGK/MELSEC) • PLC Sensor & Motor Control
l PLC AD/DA & HSC (SIMATIC/SYSMAC/ • PLC Machine Vision Control
XGK/MELSEC)
Training Methodology : l Class-room lecture Training Methodology : l Class-room lecture
l Group discussion l Group discussion
l Practical exercise l Practical exercise
l Demonstration l Demonstration

Evaluation System : l Observation Evaluation System : l Observation

l Question and answer l Question and answer
l Oral test l Oral test
l Overall performance. l Overall performance.

27 28
 7.4 Additive Manufacturing
7.3 FMS (Flexible Manufacturing System)
Name of the Course : Additive Manufacturing
Name of the Course : FMS (Flexible Manufacturing System)
Duration : 360 Hours
Duration : 360 Hours
01 Jan 2025 Schedule : 01 Jan 2025
Schedule :
Application deadline : 31 Dec 2024
Application deadline : 31 Dec 2024
Number of Seats : 20
Number of Seats : 20 Course Fee :

Course Fee : B.Sc. Engineering /Diploma Engineering / HSC

Target Group : (Vocational) / SSC (Vocational) / TTC / SSC or
B.Sc. Engineering /Diploma Engineering / HSC equivalent.
Target Group : (Vocational) / SSC (Vocational) / TTC / SSC or Age Limit: 18 to 45 Years
equivalent.
Age Limit: 18 to 45 Years • To design 3D object for 3D printing using CAD software.
Trade Objects : • To install 3D printer and all necessary accessories.
Course Objects : • To reduce setup and queue times.
• To troubleshoot common 3D printing issues.
• Produce mor e product more quickly
• To use slicing software and learn G-code for 3d printers.
• Improve efficiency.
• Utilize human workers better l Apply Occupational Health & Safety (OH&S)
• Improve product routing Course Contents : Practice in the workplace
• Reduce time for product completion l Perform Personal Computer (PC) Application

l Interpret Technical drawings and Manuals

l Apply Occupational Health & Safety (OH&S) l Basic AutoCAD & Solidworks Design(2D)

Practice in the workplace l Basic 3D Printer Application

l Perform Personal Computer (PC) Application l 3D Pinter Slicer SW Application

l Interpret Technical drawings and Manuals l 3D Printer Disassembly/Assembly & Maintenance
Course Contents : l Fundamental Electrical & Electronics Using Open Source
l Basic Sequence & PLC Control Programing
l Prototype Manufacture Using AutoCAD 3D Design
l Introduction to FMS
& 3D Printer
l Articulated Robot Disassembly/Assembly &
l Prototype Manufacture Using SolidWorks 3D
Management Design & 3D Printer
l PLC Sensor, Machine vision & Motor Control
l 3D Printing Post Processing Using 3D Scanner
l Hand-on FMSTotal Exercise (Robot Assembling
& Printer (Case of Mold Manufacture)
Process)
l 3D Printing Post Machining Using 3D SW &
l Industrial Articulated Robot Control Application)
Printer (Case of Spider Robot Manufacture)
l Mobile Robot Control Using Scratch Block
Program l 3D Printing Post Machining/Processing Using Rhino 3D SW
& Printer (Case of Architectural Miniature Manufacture)
l Overview of MES & Smart Factory System

Training Methodology : l Class-room lecture

Training Methodology : l Class-room lecture
l Group discussion
l Group discussion
l Practical exercise
l Practical exercise
l Demonstration
l Demonstration
Evaluation System : l Observation
Evaluation System : l Observation l Question and answer
l Question and answer l Oral test
l Oral test l Overall performance.
Overall performance.
30
29
 7.6 Autonomous Drone Application
7.5 Autonomous Vehicle
Name of the Course : Autonomous Vehicle Name of the Course : Autonomous Drone Application
Duration : 360 Hours Duration : 360 Hours

Schedule : Schedule : 01 Jan 2025

01 Jan 2025
Application deadline : 31 Dec 2024
Application deadline : 31 Dec 2024
Number of Seats : 20
Number of Seats : 20
Course Fee :
Course Fee :
B.Sc. Engineering /Diploma Engineering / HSC
B.Sc. Engineering /Diploma Engineering / HSC (Vocational) / SSC (Vocational) / TTC / SSC or
Target Group : Target Group : equivalent.
(Vocational) / SSC (Vocational) / TTC / SSC or
equivalent. Age Limit: 18 to 45 Years Age Limit: 18 to 45 Years

Course Objects : • To learn autonomous vehicle image processing • To learn basic drone navigation
• To learn driving system maintenance Trade Objects : • To learn basic drone photographing
• To learn autonomous vehicle control • To learn drone control system
• To learn Hands-free steering • To learn IoT programming based on Arduin
• To learn Adaptive cruise control (ACC) down • To develop skill manpower
to a stop
• To learn Lane-centering steering Course Contents : • Apply Occupational Health & Safety (OH&S) Practice
• To develop skill manpower in the workplace
Course Contents : l Apply Occupational Health & Safety (OH&S) Practice • Perform Personal Computer (PC) Application
in the workplace • Interpret Technical drawings and Manuals
l Perform Personal Computer (PC) Application
l Interpret Technical drawings and Manuals
• Carry Out Precision Checks and Measurements
l Carry Out Precision Checks and Measurements • Fundamental of Drone technology
l Fundamental of Autonomous Vehicle
• Aviation Regulation & Aviation Regulation Simulation
l Path tracking algorithm for autonomous vehicles
l Introduction to Autonomous Vehicle Control
Practice
l Introduction to Autonomous Vehicle ADASSensor • Basic Drone Navigation
l Introduction to Autonomous Vehicle Communication
• Basic Drone Photographing
(CAN, LIN)
l Autonomous Vehicle Radar/Lidar Sensor
• Basic IoT Programing Based on Arduino
l Hybrid/Autonomous Vehicle Communication System • Drone Video Photographing(Documentary Type)
Maintenance • Drone Navigation and Photographing(Rotation Wings)
l Hybrid/Autonomous Vehicle Convenience & Driving
System Maintenance • Drone Navigation and Photographing(Fixed Wings)
l Autonomous Vehicle Embedded System Programing • Drone Control & Navigation Using Arduino Programing
l Autonomous Vehicle Image Processing
• Drone Navigation and VR 3600 Photographing
Training Methodology : l Class-room lecture Training Methodology : l Class-room lecture
l Group discussion l Group discussion
l Practical exercise l Practical exercise
l Demonstration l Demonstration
Evaluation System : Observation
Evaluation System : Observation
l
l
Question and answer
Question and answer
l
l
Oral test
Oral test
l
l
Overall performance.
Overall performance.
l
l

32
31
 7.8 Electrical & Electronics Design
7.7 Alternative Energy
Name of the Course : Electrical & Electronics Design
Name of the Course : Alternative Energy
Duration : 360 Hours
Duration : 360 Hours 01 Jan 2024 to 28 Mar 2024, 28 Apr to 25 Jul 2024,
Schedule : For Batch no:1st and 2nd respectively.
Schedule : 01 Jan 2025
Application deadline : 21 Dec 2023, 18Apr 2024.
Application deadline : 31 Dec 2024 For Batch no:1st and 2nd respectively.
Number of Seats : 20
Number of Seats : 20
Course Fee :
Course Fee : Free B.Sc. Engineering /Diploma Engineering / HSC
Target Group :
Target Group : B.Sc. Engineering /Diploma Engineering / HSC (Vocational) / SSC (Vocational) / TTC / SSC or
(Vocational) / SSC (Vocational) / TTC / SSC or equivalent.
equivalent. Age Limit: 18 to 45 Years
Age Limit: 18 to 45 Years
Trade Objects : • To learn electronics circuit schematic work.
Course Objects : • To learn solar photovoltaic plant design • To learn CAD- electrical design application
•To learn fundamental of alternative energy • To learn PCB Artwork Using OrCAD Layout
•To learn wind power plant management & • Fresh skilled workforce can fill the skills gap.
maintenance • Meets our local & oversees demand by re-skilling and up
•Fresh skilled workforce can fill the skills gap. -skilling training.
•Meets our local & oversees demand by re-skilling
and up-skilling training. Course Contents : • Apply Occupational Health & Safety (OH&S) Practice
in the workplace
• Apply Occupational Health & Safety (OH&S) Practice
Course Contents : • Perform Personal Computer (PC) Application
in the workplace
• Interpret Technical drawings and Manuals
• Perform Personal Computer (PC) Application
• Carry Out Precision Checks and Measurements
• Interpret Technical drawings and Manuals
• Fundamental Electrical & Electronics
• Carry Out Precision Checks and Measurements
• Electronics Circuit(Level-1)
• Fundamental Alternative Energy
• Electronics Circuit Schematic Work Using Altium Designer
• Solar Photovoltaic Fundamental Practice
• Electrical Drawing Work Using AutoCAD-Electrical
• Wind Power Generation Fundamental Practice
• Electronics Circuit Schematic Work Using orCAD Capture
• Solar Photovoltaic Module/Inverter & Distribution System
• Electronics Circuit(Level-2)
Link
• PCB Artwork Using Altium Designer
• SAPV/BIPV System & Plant Maintenance
• AutoCAD-Electrical Design Application
• Wind Power Control Using HILS & WindSIM
• PCB Artwork Using or CAD Layout
• Solar Photovoltaic Plant Design Using Ecotect & Solar Pro
• Electronics Circuit Simulation Modeling Using PSPICE
• Wind Power Plant Management & Maintenance
• Electrical Facilities Design Using E-PLAN

Training Methodology : l Class-room lecture Training Methodology : • Class-room lecture

l Group discussion • Group discussion
l Practical exercise • Practical exercise
l Group discussion • Demonstration

Evaluation System : l Observation Evaluation System : • Observation

l Question and answer • Question and answer
l Oral test • Oral test
l Overall performance. • Overall performance.

33 34
 7.10 Electrical Facilities
7.9 Electrical Machine
Name of the Course : Electrical Facilities
Name of the Course : Electrical Machine
Duration : 360 Hours
Duration : 360 Hours
Schedule. : 01 Jan 2025
Schedule : 01 Jan 2025

Application deadline : 31 Dec 2024

Application deadline : 31 Dec 2025

Number of Seats : 20 Number of Seats : 20

Course Fee :
Course Fee :
B.Sc. Engineering /Diploma Engineering / HSC
Target Group : B.Sc. Engineering /Diploma Engineering / HSC
(Vocational) / SSC (Vocational) / TTC / SSC or Target Group : (Vocational) / SSC (Vocational) / TTC / SSC or
equivalent. equivalent.
Age Limit: 18 to 45 Years Age Limit: 18 to 45 Years
• Increase use of intelligence device in new commercial,
• Capable of utilizing the latest knowledge and Trade Objects : residential & industrial wiring & instrumentation.
Course Objects : technique in electrical machine • Capable of utilizing the latest knowledge and technique in
• To learn electrical instrument design, manufacture
& maintenance electrical installation and maintenance.
• To learn electrical instrument control • Fresh skilled workforce can fill the skills gap.
• Fresh skilled workforce can fill the skills gap. • Meets our local & oversees demand by re-skilling and up
• Meets our local & oversees demand by re-skilling -skilling training.
and up-skilling training.
Course Contents : • Apply Occupational Health & Safety (OH&S) Practice
• Apply Occupational Health & Safety (OH&S) Practice in the workplace
in the workplace • Perform Personal Computer (PC) Application
Course Contents : • Perform Personal Computer (PC) Application • Interpret Technical drawings and Manuals
• Interpret Technical drawings and Manuals • Carry Out Precision Checks and Measurements
• Carry Out Precision Checks and Measurements • Basic Electric Work
• Fundamental Electrical Instrument • Electric Plumbing Work
• Electrical Instrument Disassembly & Assembly • Electric Wiring Work
• Electrical Instrument Manufacture(Level-1) (Single • Electric Power Control Panel Work with Sequence
Phase Induction Motor Coil Winding) Circuit(Level-1)
• Electrical Instrument Manufacture(Level-2) (3-Phase • Electrical Instrument Control(Level-2) (Inductive/
Induction Motor & Transformer Coil Winding) Synchronous Machine & Transformer)
• Electrical Instrument Control(Level-1) (DC Machine) • Low Voltage Electric Installation Management
• Electrical Instrument Control(Level-2) (Inductive/ • Electric Power Panel Management
Synchronous Machine & Transformer) • Power Transmission System
• Electrical Instrument Design Exemplification & • Power Distribution System
Maintenance(Explosion-Proof Type)
Training Methodology : • Class-room lecture
Training Methodology : • Class-room lecture • Group discussion
• Group discussion • Practical exercise
• Practical exercise • Demonstration
• Demonstration
Evaluation System : • Observation
Evaluation System : • Observation • Question and answer
• Question and answer • Oral test
• Oral test • Overall performance.
• Overall performance.
36
35
7.11 Machine Shop Practice 7.12 CAD-CAM Lathe and Milling
Name of the Course : Machine Shop Practice Name of the Course : CAD-CAM Lathe and Milling
Duration : 360 Hours Duration : 360 Hours
Schedule : 01 Jan 2025
Schedule : 01 Jan 2024
Application deadline : 31Dec 2024
Application deadline : 31 Dec 2024
Number of Seat : 20
Number of Seats : 20
Course Fee :
Course Fee :
Minimum Qualification: JSC pass or Equivalent
Target Group : Age Limit: 18 to 45 Years
Target Group : B.Sc. Engineering /Diploma Engineering / HSC
Trade Objects : l To perform Computations Using Basic (Vocational) / SSC (Vocational) / TTC / SSC or
Mathematical Concepts equivalent.
l To apply Occupational Health and Safety
Age Limit: 18 to 45 Years
(OHS) Practices in the Workplace
l To communicate in English in the Workplace

l To operate in a Self-Directed Team Trade Objects : • To understand the principle of CNC milling/lathe operation
l To interpret Technical Drawings and Plans • To know how to operate CNC milling/lathe operation
l To work with Mechanical Hand and Power Tools • To learn CNC basic programming
l To carry Out Precision Checks and Measurements • To know how to reduce machining time
l To apply Quality System and procedures • To design product in software and cut in machine
l Carryout Bench Working Operations
l To perform Drilling, Lathe, Milling, Shaper and Course Contents : • Apply Occupational Health & Safety (OH&S) Practice
Precision Grinding Machine Operations in the workplace
Course Contents : l To operate in a Self Directed Team • Perform Personal Computer (PC) Application
l To communicate in English in the Workplace • Interpret Technical drawings and Manuals
l To perform Computations Using Basic
• Carry Out Precision Checks and Measurements
Mathematical Concepts • Perform CNC Lathe operation
l To apply Occupational Health & Safety(OHS)
• Perform CNC machining center operation
Practices in the Workplace • Create a model using CAD software
l To interpret Technical Drawing & Plans
• Apply CAM for computer-aided machining
l To work With Mechanical Hand & Power Tools
• Perform multi-axis machining
l Carry Out Precision Checks & Measurements

l To apply Quality System and Procedures Training Methodology : • Class-room lecture

• Group discussion
Training Methodology : l Class-room lecture • Practical exercise
l Group discussion • Demonstration
l Practical exercise
l Demonstration Evaluation System : • Observation
• Question and answer
Evaluation System : Observation
• Oral test
l

l Question and answer

l Oral test
• Overall performance.
l Overall performance.

38
37
 9. Self-Employment and Poverty Alleviation (SEPA), Phase-2, BITAC.
9.1 BITAC, Dhaka. ( For Female )
8. Accelerating and Strengthening Skills for Economic Transformation (ASSET).
8.1 BITAC-Dhaka, Chattogram & Chandpur.
S.l
Name of the Course Schedule No. of Seats/ Course
No. Course Fee
1 Machine Shop
Sl. Name of the Course Schedule Duration No. of Course
No. (Hours) seats Fee 2 Mobile Servicing
1 Electrical Installation 01 Sep’24 to 31 Dec’24 3 Electrical Maintenance From 01 Jul 2024 to 30 Sep 2024 for
& Maintenance 01 Jan’25 to 30 Apr’25 360 20 Free Refrigeration & the 13th batch
04 May’25 to 30 Aug’25 From 01 Oct 2024 to 31 Dec 2024 for
4
Air conditioning
01 Sep’24 to 31 Dec’24 the 14th batch 30
2 Welding 01 Jan’25 to 30 Apr’25
5 Auto CAD From 01 Jan 2025 to 31 Mar 2025 for
Free
360 20 Free
04 May’25 to 30 Aug’25 House Hold Appliance the 15th batch
6
Maintenance From 01 Apr 2025 to 30 Jun 2025 for
Candidate having SSC or equivalent certificate along with technical
Target Group 7 Handicraft the 16th batch
experience, TTC/VTI certificate holders, Diploma in Engineering.
8
Plastic Processing
(General)
8.2 BITAC-& Bogura.
9 Plastic Processing
Sl. Name of the Course Duration No. of Course (Customized)
No. Schedule (Hours) seats Fee
Target Group Minimum 8th/ JSC pass and Age Limit:18 to 30 Years
1 Refrigeration & 01 Sep’24 to 31 Dec’24
Air Conditioning 01 Jan’25 to 30 Apr’25 360 20 Free
04 May’25 to 30 Aug’25 9.2 BITAC, Dhaka. (For Male)
01 Sep’24 to 31 Dec’24 S.l
Name of the Course Schedule No. of Seats/ Course
2 Boiler Operation & No. Course Fee
01 Jan’25 to 30 Apr’25 360 20 Free
Maintenance 04 May’25 to 30 Aug’25 1 Machine Shop From 01 Jul 2024 to 30 Sep 2024 for
2 Electronics the 13th batch
Target Group Candidate having SSC or equivalent certificate along with technical
3 Electrical Maintenance From 01 Oct 2024 to 31 Dec 2024 for 30 Free
experience, TTC/VTI certificate holders, Diploma in Engineering.
4 Refrigeration & the 14th batch
Air conditioning From 01 Jan 2025 to 31 Mar 2025 for
8.3 BITAC, Khulna 5 Auto CAD
the 15th batch
Sl. Duration No. of Course Computer Hardware
No. Name of the Course Schedule 6
(Hours) seats Fee Maintenance From 01 Apr 2025 to 30 Jun 2025 for
Electrical Installation 7 Welding the 16th batch
1 01 Sep’24 to 31 Dec’24 20
& Maintenance 01 Jan’25 to 30 Apr’25 Free Target Group Minimum 8th/ JSC pass and Age Limit:18 to 30 Years
360
04 May’25 to 30 Aug’25
9.3 BITAC, Chattogram, Khulna and Bogura. (For Male)
01 Sep’24 to 31 Dec’24
S.l Name of the Course Schedule No. of Seats/
Machine Shop No. Course
2 01 Jan’25 to 30 Apr’25 360 20 Free From 01 Jul 2024 to 30 Sep 2024 for Course Fee
Practice 04 May’25 to 30 Aug’25 Welding (Arc & the 13th batch
1
Gas) From 01 Oct 2024 to 31 Dec 2024
Candidate having SSC or equivalent certificate along with technical Electrical for the 14th batch 30
2
Maintenance From 01 Jan 2025 to 31 Mar 2025for
Target Group experience, TTC/VTI certificate holders, Diploma in Engineering.
the 15th batch
Free

3
Refrigeration & From 01 Apr 2025 to 30 Jun 2025 for
Air conditioning the 16th batch
39
Target Group Minimum 8th/ JSC pass and Age Limit:18 to 30 Years

40
9.4 BITAC, Chattogram, Khulna and Bogura. (For Male)
10. BITAC, Chattogram.
S.l
Name of the Course Schedule No. of Seats/ Course
No. Trade/Batch Fee 10.1 Long Term Technical Training Program (Regular)
Mobile Servicing From 01 Jul 2024 to 30 Sep 2024 Sl. Name of the Course Schedule Practicing No. of Course
for the 13th batch No. Course No. (Weeks) seats Fee
From 01 Oct 2024 to 31 Dec 2024 30 Free
1 Machine 07 July 2024 to 10 Oct 2024
Electrical 173
Maintenance for the 14th batch 174 20 Oct 2024 to 23 Jan 2025
14
Shop 175 26 Jan 2025 to 01 May 2025 10 5,000/=
From 01 Jan 2025 to 31 Mar 2025 176 04 May 2025 to 07 Aug 2025
Refrigeration & for the 15th batch
Air conditioning 07 July 2024 to 10 Oct 2024
2 Electrical 8,000/=
From 01 Apr 2025 to 30 Jun 2025 173
174 20 Oct 2024 to 23 Jan 2025 14 20
for the 16th batch Maintenance 175 26 Jan 2025 to 01 May 2025
176 04 May 2025 to 07 Aug 2025
Target Group Minimum 8th/ JSC pass and Age Limit: 07 July 2024 to 10 Oct 2024
18 to 30 Years 3 Welding 173
7,500/=
174 20 Oct 2024 to 23 Jan 2025 14 20
175 26 Jan 2025 to 01 May 2025
176 04 May 2025 to 07 Aug 2025
9.5 BITAC, Chandpur. (For Male) 173 07 July 2024 to 10 Oct 2024
S.l
Name of the Course Schedule No. of Seats/ Course 4 Machine 174
175
20 Oct 2024 to 23 Jan 2025 14 10 5,000/=
No. Course Fee Maintenance 26 Jan 2025 to 01 May 2025
176
04 May 2025 to 07 Aug 2025
Welding (Arc & From 01 Jul 2024 to 30 Sep 2024
Gas) for the 13th batch 10.2 Customized Technical Training Program.
30
From 01 Oct 2024 to 31 Dec 2024 Free
Sl. Name of the No. of
Machine Shop th
for the 14 batch Schedule Duration Course
No. Course (Weeks) seats Fee
From 01 Jan 2025 to 31 Mar 2025
Electrical for the 15th batch 1 Auto CAD (2D & 3D) As per Discussion 6 6 5,000/=
Maintenance From 01 Apr 2025 to 30 Jun 2025
for the 16th batch
10.3 Long Term Technical Training Program (Customized)
Target Group Minimum 8th/ JSC pass and Age Limit:
18 to 30 Years Sl. Name of the Course Duration Duration No. of Course
No. Course No. (Hours) seats Fee
Refrigeration & As per As per
1 360 10
Air Conditioning Demend Discussion 5,000/=

11. BITAC, Chandpur, Khulna & Bogura

Long Term Technical Training Program (Regular)
Sl. Name of the Course Schedule Practicing No. of Course
No. Course No. (Weeks) seats Fee
07 July 2024 to 10 Oct 2024
1 Machine 173
174 20 Oct 2024 to 23 Jan 2025
Shop 175 26 Jan 2025 to 01 May 2025 14 10 5,000/=
176 04 May 2025 to 07 Aug 2025
173 07 July 2024 to 10 Oct 2024
2 Electrical 174 20 Oct 2024 to 23 Jan 2025 14 20 8,000/=
Maintenance 175 26 Jan 2025 to 01 May 2025
176 04 May 2025 to 07 Aug 2025
173 07 July 2024 to 10 Oct 2024
3 Welding 7,500/=
174 20 Oct 2024 to 23 Jan 2025 14 20
175 26 Jan 2025 to 01 May 2025
176
04 May 2025 to 07 Aug 2025
41
42
12. Tool & Technology Institute (TTI), BITAC.
12.1Training Program (ASSET & Regular) 12.3 CNC Machine Operation (ASSET)
Sl. Name of the Course Schedule Duration No. of Course
No. Course Type (Hours) seats Fee Name of the Course : CNC Machine Operation
1. CNC Machine
ASSET 01 Sept 2024 to 31Dec 2024 360 25
Free
Duration : 360 Hours
Operation 01 Jan 2025 to 30 Apr 2025 360 25
360 25 Schedule : 01 Sept 2024 to 31Dec 2024, 01 Jan 2025 to 30 Apr 2025,
04 May 2025 to 30 Aug 2025
04 May 2025 to 30 Aug 2025
Programmable 01 Sept 2024 to 31Dec 2024 360 25 Nomination deadline : 29 Aug 2024, 26 Dec 2024 and 27 Feb 2025
2. Logic Controller ASSET 01 Jan 2025 to 30 Apr 2025 360 25 Free
04 May 2025 to 30 Aug 2025 360 25 Number of Seates : 25
(PLC)
Course fee : Free
01 Sept 2024 to 31Dec 2024
360 25 Free Candidate having B.Sc./Diploma in engineering or equivalent.
3. Mechatronics ASSET 01 Jan 2025 to 30 Apr 2025 360 25 Target Group :
For technical experience, educational qualification might
04 May 2025 to 30 Aug 2025
360 25 be compromised.

CNC Machining 21 Jul 2024 to 17 Oct 2024 360 20 Course object : • To understand the principle of CNC milling operations.
4. Centre Operation Regular 20 Oct2024 to 20 jan 2025 360 20 • To know how to operate a CNC machine
10,000/=
With CAD & 26 Jan 2025 to 30 Apr 2025 360 20 • To learn CNC basic programming.
CAM 04 May 2025 to 30 Jul 2025 360 20 • To know how to reduce machining time
5. Programmable 21 Jul 2024 to 17 Oct 2024 360 20 • To design particular part and develop in machine.
Regular 20 Oct2024 to 20 jan 2025
Logic 360 20 10,000/= • To design product in software and cut in machine.
Controller 26 Jan 2025 to 30 Apr 2025 360 20 Course Contents : • Safety
(PLC) 04 May 2025 to 30 Jul 2025 360 20 • Machine operating
• Manual programming with G&M codes
• Mechanical Drawing
• Solid works
• Mastercam 2D programming
• Mastercam 3D programming
12.2 Customized Technical Training Program.
Name of the
Training Methodology : • Theory Classes
Sl. Schedule No. of Course
No. Course seats Fee • Demonstration
1 Solid Works • Practice on machine
• Daily evaluation
2 Intermediate Automation and Control
As per 10 7,500/- • Motivational session
System/PLC Discussion
Evaluation System : • Participation in the session
3 3D printing with CAD
4 EDM & EDM Wire cut Machine operation
• Oral test
• Written test
5 Wood Router
• Evidence guides
• Practical examination

43 44
 01 Sept 2024 to 31Dec 2024, 01 Jan 2025 to 30 Apr 2025,
04 May 2025 to 30 Aug 2025
12.4 Mechatronics (ASSET) 12.5 Programmbale Logic Controller (PLC) (ASSET)
Name of the Course : Mechatronics
Name of the Trade : Programmbale Logic Controller (PLC)
Duration : 360 Hours
Duration : 360 Hours
Schedule : 01 Sept 2024 to 31Dec 2024, 01 Jan 2025 to 30 Apr 2025, Schedule : 01 Sept 2024 to 31Dec 2024, 01 Jan 2025 to 30 Apr 2025,
04 May 2025 to 30 Aug 2025
04 May 2025 to 30 Aug 2025
Nomination deadline : 29 Aug 2024, 26 Dec 2024 and 27 Feb 2025
Number of Seates : 25 Nomination deadline : 29 Aug 2024, 26 Dec 2024 and 27 Feb 2025
Course fee : Free Number of Seats : 25
Trade fee : Free
Target Group : Candidate having B.Sc/Diploma in engineering or
equivalent. For technical experience educational Target Group : Candidate having B.Sc./Diploma in engineering or
qualification might be compromised. equivalent. For technical experience, educational
qualification might be compromised.
Course object : • To understand the principle of Mechatronics and its
application l To understand the principle of Mechatronics and its
Course object : application.
• To know the application of PLC.
To know the application of PLC.
•
l
To know various sensors and actuator and its application.
l To know various sensors and actuator and its
• To understand the industrial application of hydraulic and application.
pneumatics l To understand the industrial application of
• To understand the application of Automation hydraulic and pneumatics.
Course Contents : • Pneumatic system l To understand the application of Automation
• Electro-pneumatic system
• Mechanical power transmission system Course Contents : l Pneumatic system
• Basic hydraulic and hydraulic control system l Electro-pneumatic system
• Hydraulic circuit and Electro-hydraulic l Mechanical power transmission system
• Programmable Logic Control (PLC) l Basic hydraulic and hydraulic control system
• Sensor & Instrumentation l Hydraulic circuit and Electro-hydraulic
• Introduction to Micro-Controller l Programmable Logic Control (PLC)
l Sensor & Instrumentation
Training Methodology : Introduction to Micro-Controller
• Theory Classes
l

• Demonstration Training Methodology : l Theory Classes

• Practice on machine l Demonstration
• Daily evaluation l Practice on machine
• Motivational session l Daily evaluation

l Motivational session
Evaluation System : l Participation in the session
l Oral test Evaluation System : l Participation in the session
l Written test
l Oral test
l Evidence guides
l Written test
l Practical examination
l Evidence guides
l Practical examination

45 46
 12.7 Programmbale Logic Controller (PLC) (Regular)
12.6 CNC Machining Centre Operation with CAD & CAM ( Regular)
Name of the Trade : Programmbale Logic Controller (PLC)
Name of the Trade : CNC Machining Centre Operation with CAD & CAM
( Regular)
Duration : 360 Hours
Duration : 360 Hours Schedule : 21 Jul 2024 to 17 Oct 2024, 20 Oct 2024 to 20 Jan 2025,
21 Jul 2024 to 17 Oct 2024, 20 Oct 2024 to 20 jan 2025, 26 Jan 2025 to 30 Apr 2025 and 04 May 2025 to 30 Jul 2025
Schedule :
26 Jan 2025 to 30 Apr 2025,04 May 2025 to 30 Jul 2025 Nomination deadline : 11 Jul 2024, 10 Oct 2024, 16 Jan 2025, 24 Apr 2025
Nomination deadline : 11 Jul 2024, 10 Oct 2024,16 Jan 2025 and 24 Apr 2025 Number of Seats : 20
Number of Seats : 20 Trade fee : Free
Course fee : 10,000/- Target Group : Candidate having B.Sc./Diploma in engineering or
equivalent. For technical experience, educational
Target Group : Candidate having B.Sc/Diploma in engineering or
qualification might be compromised.
equivalent. For technical experience educational
qualification might be compromised.
Course object :
l To understand the principle of Mechatronics and its
Course Objects : • To understand the principle of CNC Milling
application.
operations. l To know the application of PLC.
• To know how to operate a CNC Milling machine. l To know various sensors and actuator and its
• To learn CNC Milling basic programming. application.
• To know how to reduce machining time. l To understand the industrial application of
• To design particular part and develop in machine. hydraulic and pneumatics.
• To design product in software and cut in machine. l To understand the application of Automation

Course Contents : • Safety Course Contents : l Pneumatic system

• Machine operating l Electro-pneumatic system
• Manual programming with G&M codes l Mechanical power transmission system
• Mechanical Drawing l Basic hydraulic and hydraulic control system
• Solid works l Hydraulic circuit and Electro-hydraulic
• Master CAM 2D programming l Programmable Logic Control (PLC)
• Master CAM 3D programming l Sensor & Instrumentation
• Theory Classes l Introduction to Micro-Controller
Training Methodology :
• Demonstration
• Practice on machine Training Methodology : l Theory Classes
• Daily evaluation l Demonstration
• Motivational session l Practice on machine

Evaluation System : • Participation in the session l Daily evaluation

• Oral test l Motivational session

• Written test
• Evidence guides Evaluation System : l Participation in the session
• Practical examination l Oral test
l Written test
l Evidence guides
l Practical examination

47 48
13. INDUSTRIAL ATTACHMENT TECHNICAL TRAINING PROGRAM, BITAC- Dhaka.
Chattogrom, Khulna, Bogra, Chandpur and TTI.
Name of the Trade : Industrial Attachment Technical Training Program
Duration : Depends on the participating Institute
Schedule : At any time of the year depending on the participating Institute
Nomination deadline : Depends on the participating Institute
Number of Seates : As per demand
Course fee : As per Govt. rule depending on the sending Institute
Target Group : All the public and private technical Universities, Polytechnic Institute, TTC etc.

Course Objects : • Introducing different conventional machine tools such as lathe,

milling, grinding planer, boring, shaper, shearing, drilling, ball
press, power press etc and CNC & Servo Control machine tools
such as lathe, milling center, die sink EDM, & wire cut EDM.
• Comparing theoritical and practical operaton systems of
different traditional and CNC machine tool to develop spare
parts or products,
• Acquainting with different melting and heat treatment furnaces
and their operation system and also different surface treatment
including protective coating;
• To make adapted in real life situation
• Understanding estimation and controlling production system.
• Rendering practical know-how on plastic processing technology.
• Introducing 3D printing operation.
Course Contents : • Welding and Fabrication
• Conventional Machine Tool-lathe, milling grinder, planer,
boring, shaper, shearing, drilling, ball press and power
press machine etc.
• CNC Machine Tool-lathe, milling, machining center &
wire cut EDM.
• Special Machine Tool-Copy milling, pantograph milling, profile
grinder, jig Boring & jig Grinding, servo control die sink EDM
• Tool and Cutter Grinding,
• Light Forging,
• Heat-Treatment
• Patten,
• Foundry
Training Methodolog : • Group discussion
• Practical exercise
• Case study.
Evaluation System : • Group exercise
• Individual exercise
• Discussion
• Oral test
• Overall performance.

50

49