Recalled Questions 2015
AREA 3
1. In PAES 401:2001(Housing for Swine Production), the sows and piglets remain
in the farrowing house until the piglets are weaned and then transferred to a
growing-finishing house.
a. One-unit c. Three-unit
b. Two-unit d. Four-unit
2. Type of thresher wherein the panicles of the cut plants are fed into the
threshing chamber while the stalks are mechanically or manually held during
the threshing operation.
a. Thrown-in type thresher c. Hold-0n type thresher
b. Axial Flow thresher d. Through-flow type Thresher
3. Throw-in type thresher wherein cut plants are fed between the rotating
cylinder and stationary concave and the threshed materials are discharged
out of the threshing chamber tangentially.
a. Thrown-in type thresher c. Hold-0n type thresher
b. Axial Flow thresher d. Through-flow type Thresher
4. Type of thresher which detaches the grains by feeding the cut plants into the
machine.
a. Thrown-in type thresher c. Hold-0n type thresher
b. Axial Flow thresher d. Through-flow type Thresher
5. Types of thresher with high input capacity.
a. Thrown-in type thresher c. Combination of Hold-on and
Throw-in
b. Hold-on type thresher d. Two Hold-on Threshers
6. It is the extent by which bran layer of brown rice is removed as a result of
whitening.
a. Milling recovery c. Milling Degree
b. Milling efficiency d. Milling Capacity
7. Corn grits with particle size of 0.86 mm to 1.09 mm.
a. Grit # 18 c. Grit # 14
b. Grit # 16 d. Grit # 12
8. Machine used to detach, separate and clean the kernels from the cob.
a. Corn Miller c. Corn Huller
b. Corn Sheller d. All of the above
9. In PAES 212:2004 (Rice Reaper – Specification), what is the maximum noise
level of the machine?
a. 96 dbA c. 92 dbA
b. 94 dbA d. 100 dbA
10.Type of forage chopper where the chopped materials are blown up through
the blow-up pipe.
a. Throw-away type c. random cut type
b. Blow-up type d. Precision type
11.In PAES 403:2001 (Housing for Layer Production), type of flooring with
openings to facilitate cleaning of the droppings.
a. Slotted floor c. slot-litter floor
b. Litter floor d. solid floor
12.Mature male goat.
a. Doe c. Buck
b. Ram d. Ewe
13.For every 100 chicks, the waterer shall be placed on stands about 25 mm
high, what is the minimum water requirement for linear type waterer (PAES
402:2001 Housing for Broiler Production).
a. 4 Liters c. 3Liters
b. 3.6 Liters d. 2.5 Liters
14.In PAES 402:2001 Housing for Broiler Production, what is the length of
waterer for linear type for 4 weeks old chicks.
a. 4 meters c. 2 meters
b. 3 meters d. 1 meter
15.In PAES 410:200 (Lairage for Swine, Small and Large Animals), what is the
minimum distance from the slaughter house?
a. 15 meters c. 10 meters
b. 20 meters d. None of the Above
16.A gaseous product of anaerobic digestion that consists primarily of methane
and carbon dioxide. (hindi ganito ang tanong pero ito definition ng sagot)
a. LPG c. Natural Gas
b. Producer Gas d. Biogas
17.Part of biogas digester that purifies and removes impurities from a gas.
(something like this)
a. Scrubber c. Stirrer
b. Digester d. None of the Above
18.A small trench for the drainage of animal waste. (parang ganito ang
pagkakaintindi ko)
a. Gutter c. Pit
b. Alley d. None of the above
19.Method of greenhouse construction where modular roof units are connected
at the eave by a common gutter.
a. Quonset c. Arch
b. Ridge and Furrow d. Gable
20.In PAES 415:2001 (Greenhouses), an air circulation space allowed between
the sidewalls and the benches.
a. 150 mm c. 160 mm
b. 140 mm d. 180 mm
21.The minimum width for two-lane roadway (PAES 421:2009 Farm To Market
Road).
a. 2 meters c. 4 meters
b. 3 meters d. 6 meters
22.What is the third layer from the top for the Bituminous Road.
a. Aggregate Base course c. Base Course
b. Aggregate Subbase Course d. Subbase Course
23.The radius of curvature for flat, rolling and mountainous terrain.
a. 500, 200, 100 mm c. 500, 150, 50 mm
b. 500, 200, 50 mm d. 500, 200, 100 mm
24.A body or substance that absorbs heat through expansion on vaporization at
lower temperature to higher temperature.
a. Coolant c. Two of the above
b. Refrigerant d. None of the above
25.A substance added to the mixture to increase the strength and minimize the
time of drying (para mapadali ang pagpapadry pero madagdagan ang
tibay??)
a. Accelerator c. Pozollana
b. Hydrator d. None of the Above
26.The equivalent amount paid by the World Bank for carbon emission reduction
projects. (eto ung simplified na tanong)
a. Carbon trading value c. Carbon Credit value
b. Carbon Emission value d. All of the Above
27.Type of diode to prevent from lightning (parang ganito un?)
a. By-pass diode c. lightning diode
b. Shading diode d. blocking diode
28.What machine is highly mechanized in the Philippines? (for corn ata ito, basta
parang ganito ung sense)
a. Seeder c. Sheller
b. Planter d. None of the above
29.In corn production in the Philippines, what machine is not yet mechanized?
(basta parang ganito un)
a. Seeder c. Sheller
b. Planter d. None of the above
30.A micro-hydro power plant generated a discharge of ____ at a head of _____.
The efficiency is 80%. What is the power generated by the power plant?
(simplified na ito, mahaba-haba kasi yung problem eh di ko na tanda ung
iba.)
a. 5hp c. 3hp
b. 4hp d. 2hp
31.Conversion of foot candle to lux given kung ilang candela at dimension pati n
rin ang distance ng bawat lighting.
32.Computation kung ilang “kilowatt-peaks” given na ang mga data. (sa solar
panel ito)
33.Computation kung ilang module ng solar panel given na rin ang mga data.
34.May problem din na ang hanap eh total ampere pero direct substitution na
yun.
35. A motor has the following data: cycle=60; pole=4, Voltage and current are
also given. What is the speed of the motor? Answer: 1800 rpm
36.Given: voltage=120 V; current=2 A; charge= 10 C. what is the time. Answer:
5 sec
37.A rotor generated a ___turns at a speed of ___rpm. What is the new speed if
the rotor generated a ___turns. (Ratio & proportion)
38.The same problem as above iba lang ang values.
39.Given the HP, Ampere, voltage, what is the power factor (limot ko mga
values, xenxia na. jeje). Answer: 0.52
40.Given the resistance, capacitance, frequency; what is the total current of the
circuit?
41.May problem na given ang current, capacitance, voltage at resistance, ang
tanong eh ano ang current kung double ang capacitance at frequency.
42.Beam with a uniformly distributed load at the midspan, compute for the
deflection. Given ang load, length of beam, modulus of elasticity (E) at
moment of inertia (I).
43.Find the deflection of a beam with a concentrated load given ang E, I, loads,
width and length.
44.A wall with ___cm thick has a hydraulic conductivity of ___ with inside
temperature of ____. The wall outside temperature is ____ with a conductivity
of _____. (May continuation pa ito, may dagdag n material, bale combination
ng conduction at convection). The question is what is the total conductivity of
the wall?
45.Another computation of heat transfer with composite areas. Conductivity pa
rin ang hanap.
46.– 48. Situational. Computation of CHB, Vertical & Horizontal Reinforcement
bars. Given the dimension of the CHB (4" x 8" x 16"), dimension of the fence
is 40 m x 2m (L x H), post dimension is 0.25 x 0.25m and 4m spacing
between posts. Given the space between reinforcement bars of the horizontal
and vertical.
