AVK GATE VALVE PN 10 OR PN 16 55/30

To DIN 3352 part 4 / BS 5163 Type B. Stem sealing exchangeable under pressure
Face to face dimension to EN 558-1: 1991 / DIN 3202 part 1, F5
Flanges and drilling to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)
Gland flange to ISO 5210: 1991. Complete By-Pass with DN 80 valve

Use: Materials:
For water, neutral liquids, sewage and Body, bonnet and Ductile iron, GGG-50, to DIN 1693
waste water with max. 10% dry matter gland flange (BS 2789 grade 500 - 7)
Max. 70°C Coating Epoxy coating - internally and
externally
Stem Stainless steel, DIN X 20 Cr 13
Stem sealing NBR wiper ring, 2 NBR O-rings
Bearing Polyamid
Wedge Ductile iron, GGG-50, core fully
Tests: vulcanised with EPDM rubber,
with integral wedge nut of
Hydraulic test to DIN 3230 part 4: dezincification resistant brass,
Seat: PN CZ 132 to BS 2874
Body: 1.5 x PN Thrust collar Dezincification resistant brass,
Operating torque test CZ 132 to BS 2874
Bonnet bolts Stainless steel A2, sealed with
hot melt
Bonnet gasket, EPDM rubber
stem/bonnet
Optional extras: and O-ring
Stem cap Gland flange NBR rubber
Gearbox with stem cap O-rings
Gearbox with handwheel Lifting eyes, Stainless steel
Gearbox with extension spindle gland flange bolts,
Electric actuator stud bolts, nuts
Flange adaptor (for DN 500-600) and washers
By-Pass valve, Ductile iron, GGG-50, to DIN 1693
bends (BS 2789 grade 500 - 7)

For further specification, see section "Technical Information".

The designs, materials and specifications shown are subject to change without notice due to our continuing programme of product development.
AVK INTERNATIONAL A/S/2000 315530EB
AVK GATE VALVE PN 10 OR PN 16 55/30
To DIN 3352 part 4 / BS 5163 Type B. Stem sealing exchangeable under pressure
Face to face dimension to EN 558-1: 1991 / DIN 3202 part 1, F5
Flanges and drilling to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)
Gland flange to ISO 5210: 1991. Complete By-Pass with DN 80 valve

Component list
1. Wiper ring 8. Bonnet 15. Lifting eye
2. Gland flange bolt 9. Bonnet gasket 16. Bonnet bolt
3. Bearing 10. Wedge nut 17. Stud bolt
4. Stem seal O-ring 11. Wedge 18. Nut
5. Gland flange O-ring 12. Body 19. Washer
6. Thrust collar 13. Stem 20. Bend
7. Stem/Bonnet O-ring 14. Gland flange 21. By-Pass valve

ød 2
3

g 4
5
13
6
7
14
15 Gland flange
16 to ISO 5210 - F16
8 ø130mm

9
H
10 ø165mm
11
12
22
mm
ø210 mm

17
18
Dt Dh D
19
20
21

ds

L A

Dt Dh ds Holes
L H mm D mm mm no. ød A g Weight
Ref. nos. DN mm mm PN 10 PN 16 mm PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 mm mm mm kilos

55-450-300X6001 450 650 1130 530 640 565 585 28 31 20 20 40 1056 80 633
55-500-300X6001 500 700 1130 585 715 620 650 28 34 20 20 40 1060 80 663
55-600-300X6001 600 800 1270 685 725 840 725 770 34 37 20 20 40 1172 80 828

X: 0 = PN 10
1 = PN 16