Industrial Ethernet Switch ICS1020G-16G-4GS
Layer 3, 16-port 10/100/1000M Base-T (x) +4-port Gigabit SFP
Features
● Support 16-port 10/100/1000M Base-T (x) +4-port Gigabit SFP;
● Comply with IEC61850-3 standard;
● Support RIP, OSPF, PIM Layer 3 Routing protocol;
● Support MW-Ring, MSTP, VRRP, EAPS redundancy network;
● Support multiple management methods and network centralized management；
● Support Front and rear indicator lights design;
● Support firmware upgrade online;
● Support relay alarm output;
● Support indicator status display;
● Support Broadcast storm suppression;
● Support dual AC/DC 220V power supply;
● Power supply input support anti-reverse protection and non-polarity;
● Support over Voltage, over current, EMC protection;
● Support wide operating temperature range from -40-85oC;
● 1U, 19-inch Rack-mount Installation;
● Warranty:5years;
Introduction
ICS1020G-16G-4GS is an industrial grade, Rack-mount, layer3, Managed Ethernet switch which supports 16-
port 10/100/1000M RJ45 + 4-port Gigabit SFP. providing sufficient data for aggregation and core data
exchange of the bandwidth; to provide high-capacity switching capabilities to support based on the three
layers of ACL function. Perfect security control strategy and CPU protection policy to improve fault tolerance
and ensure stable operation of the network and link load balancing.
UPCOM ICS1020G-16G-4GS not only supports rich Layer 2 software features such as ports, VLANs, multicast,
QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports
multiple management methods of Console, Web, and host computer network management software, can
satisfied the requirement of various industrial applications such as Intelligent Transportation System, Security
Surveillance, Industrial Automation, Smart Grid, Rail Transportation Industry, Safely City, and New Energy, etc.
Application
● Intelligent Transportation System
● Industrial Automation
● Security Surveillance
● New Energy and Utilities
● Data Center Network
● Electric Power Industry
● Smart City
sales@upcomnet.com 1 www.upcomnet.com
Specification
Specification
Product Name 20-port Full Gigabit Rack-mount Managed layer3 Industrial Ethernet switch
Product Model ICS1020G-16G-4GS
Port Definition 16-port 10/100/1000M RJ45 + 4-port Gigabit SFP
Software performance
Support VLAN, GVRP
Support port speed limit
Switch Function Support storm suppression
Support port aggregation
Support port flow control
Support VRRP/EAPS
Redundancy protocol Support MW-Ring and the recovery time<20ms
Support RSTP/MSTP and compatible with STP
Support IGMP snooping/ IGMP v1/v2/v3
Multicast Routing Support GMRP
Support static multicast
Support RIPv1 / v2, RIPng, OSPFv1/v2
Routing technology Support static routing protocol
Support PIM-SM, PIM-DM
Support ACL and L2-L7 data Filter
Service quality management
Support SP/ WRR queuing
Support Console, Telnet, WEB management mode, RMON
Support SNMPv1 / v2c
Support FTP, TFTP file transfer and software upgrade
Management and maintenance
Support power failure alarm, power alarm, port alarm, ring alarm
Support port mirroring, Syslog, LLDP, RTC, SNTPv4
IP supports DHCP server/relay /client
Technical specifications
IEEE802.3-10BaseT
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3x-Flow Control
Ethernet Standard
IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX
IEEE802.1ab
sales@upcomnet.com 2 www.upcomnet.com
IEEE802.1D-Spanning Tree Protocol
IEEE802.1w-Rapid Spanning Tree Protocol
IEEE802.1Q -VLAN Tagging
Ethernet Standard IEEE802.1s Multiple Spanning Tree Protocol
IEEE802.1p -Class of Service
IEEE802.1X-Port Based Network Access Control
GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/
PIM/SNMP/SNTP/SSH
Switch properties
Priority queue 8
VLAN ID 4096
IGMP Groups 512
MAC table 16k
Switch Bandwidth 40Gbps
Route Table 8k
Switch Delay <5μs
Interface
Port numbers: 20
Gigabit ports Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port
Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port
Console port RS232/RJ45
Terminal block for power input 5.08mm terminal block
Terminal block for relay alarm 5.08mm terminal block,1A@24VDC
Communication distance
Twisted-pair 100m(CAT5/CAT5e cable)
Multimode fiber Gigabit multi-mode: 850nm, 550m
Single mode fiber Gigabit single mode: 1310nm, 20km
LED indicator lights
Port light: LINK/ACT; SPEED
Running light: RUN
Front panel LED
Power LED: PWR1, PWR2
Alarm LED: Alarm
RJ45 LED: LINK/ACT; SPEED
Rear panel LED
Fiber LED: LINK/ACT
Power Requirements
Power input AC/DC220V(85-264VAC/110-370VDC)
sales@upcomnet.com 3 www.upcomnet.com
Full-load consumption <15W
Overload protection Support
Reverse protection Support
Redundancy protection Support
Working Environment
Operating Temperature -40°C~85°C
Storage temperature -40°C~85°C
Ambient Humidity 5%~95%( non-condensing)
Physical Characteristics
Shell IP40 protection, aluminum alloy shell
Installation 19" 1U rack mounted for front and rear outlet installation
Dimension 482.6 mm*44mm*210mm
Industry standard
EN61000-4-2(ESD), Level 4
EN61000-4-3(RS), Level 4
EN61000-4-4(EFT), Level 4
EMC
EN61000-4-5(Surge), Level 4
EN61000-4-6(CS), Level 4
EN61000-4-8, Level 5
Impact IEC60068–2-27
Falling IEC60068-2-32
Shock IEC60068-2-6
Warranty
Warranty 5 Years
Certification CE, FCC, RoHS
sales@upcomnet.com 4 www.upcomnet.com
Dimension
Order Information
Model NO. Description
ICS1020G-16G-4GS 16-port 10/100/1000M RJ45 + 4-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028-4GS 24-port 10/100M Base-T (x) +4-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028G-16G-8GC-4GS 16-port 10/100/1000M Base-T (x) +8 Gigabit Combo port +4-port Gigabit SFP, Layer 3
ICS1028G-8GC-20GS 8 Gigabit Combo port +20-port Gigabit SFP, Layer 3, Dual AC/DC220V
ICS1028G-16G-8GC-4TS 16-port 10/100/1000M Base-T (x) +8 Gigabit Combo port +4-port 10G SFP, Layer 3
Packing List
● Layer 3 Industrial Ethernet Switch *1
● User manual * 1
● Certificate of quality * 1
● Warranty card * 1
sales@upcomnet.com 5 www.upcomnet.com
