Product Information Textile Auxiliaries
DENIART L-ACT
Laser Enhancing Product for Indigo Dyed Denim Substrates
USES Laser Enhancing Product for Indigo Dyed Denim Substrates
PROPERTIES Easily diluted in water any ratio
Can be applied by spraying, brushing, dipping or machine spraying
Suitable for elastane contained fabrics
Decreases the amount of laser power needed
Improves the laser effect significantly
Increases the production capacity of the laser
COMPOSITION Special combination of neutral salts and polymers
TECHNICAL DATA Appearance : Colorless clear liquid
pH :1-3
Ionic Character : Slightly anionic
Shelf Life : 1 year in original containers
Note : Do not store at below + 5 °C or above + 35 °C
DENIMIST / DC April 2021 I Denim Chemicals EUROPE I Denimist 1/3
APPLICATION Spray Application
400-600 g/l Laser ACTIVATOR
Before laser application the garment should be 100% dry – check it by
touch & avoid rewetting during humidity of air.
Laser Application
Dipping Application (Dip/Spin/Dry)
150-250 g/l Laser ACTIVATOR
Before laser application the garment should be 100% dry – check it by
touch & avoid rewetting during humidity of air.
Laser Application
Machine Spray Application
150-250 g/l Laser ACTIVATOR
Before laser application the garment should be 100% dry – check it by
touch & avoid rewetting during humidity of air.
Laser Application
Washing after Laser
Normally mild soaping is sufficient to remove any residues. Any washing,
enzyme washing, stone washing, bleaching etc. will remove soot and re-
sidual yellow color.
In some cases yellowing occurs and is persistent, then use following rec-
ipe:
DENIMIST / DC April 2021 I Denim Chemicals EUROPE I Denimist 2/3
APPLICATION Add
2 g/L acetic acid
3 g/l Deniwash LILY-EP
60 C 5 minutes
Add 1 g/L caustic soda
10 g/l hydrogen peroxide in the same bath for 20 min, maintain pH 12.5,
Add 5 g/L acetic acid in the same bath for 5 minutes, maintain pH 4.5
Cold Rinse Note:
Note :
Time between drying and laser application. Do not exceed 4 hours be-
tween the processes. The effect strength may be affected. Do not let the
garment regain humidity from air after & drying before la- ser. Useful tip:
cover the pile of garments with the plastic coating. Drying must be kept
below 60°C check visually: no greenish look should appear on the garment
surface. Otherwise the product starts to react in dryer.
PACKING DENIART L-ACT is available at 30 kg and 120 kg polyethylene drums.
Storage : The product sensitive to frost and heat and must not be stored at temperature below 5°C or above 35°C . Irreparable damage is possible. In case of
suspected frost or heat damage , the usability of the product has to be checked before processing.
Note : The above recommendations are based on comprehensive studies and experience made in practical processing. They are, however, without liability
regarding property rights of third parties and foreign laws. The users should test for themselves whether the product and the application are suitable for their
special purposes. We are, above all, not liable for fields and methods of application which have not been put down by us in writing. Advice for marking
regulations and protective measures can be taken from the respective safety data sheet.
DENİMİST KİMYA TEKSTİL MAKİNA SAN. VE TIC. LTD. ŞTİ
Head Office : Esentepe Mah. Adnan Dogu Cad. No: 1K1/17 Corlu, Tekirdag, TURKEY Ph/Fax : +90 282 650 10 95
Factory : Ergene 2 OSB Mah. 207. Sok. No : 2/1 Ergene, Tekirdag, TURKEY
www.denimist.com.tr - info@denimist.com.tr
DENIMIST / DC April 2021 I Denim Chemicals EUROPE I Denimist 3/3
