FLUX-CORED GAS-SHIELDED WIRE | HARDFACING
FLUXOFIL 66
TOP FEATURES CLASSIFICATION
• Seamless copper coated metal cored wire for high hardness EN 14700 T Fe8
wear overlay.
• Hardness 57-62 HRC. CURRENT TYPE
DC+
TYPICAL APPLICATIONS
• Hardfacing. WELDING POSITIONS
Flat/Horizontal
SHIELDING GASES (ACC. EN ISO 14175)
M21 Mixed gas Ar+ 15-25% CO₂
CHEMICAL COMPOSITION (WEIGHT %), TYPICAL, ALL WELD METAL
C Mn Si Cr Ni Mo Nb W
1.4 0.9 0.9 6.3 0.8 0.2 9 0.25
MECHANICAL PROPERTIES, TYPICAL, ALL WELD METAL
Hardness
Shielding gas Condition* (HRc)
Typical values M21 AW 57-62
* AW = As welded
Gas test: 82% Ar + 18% CO₂
PACKAGING AND AVAILABLE SIZES
Wire diameter Weight
Packaging Item number
(mm) (kg)
1.6 SPOOL (B300) 16.0 W000281360
TEST RESULTS
Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to
prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors,
including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification
testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application
Safety Data Sheets (SDS) are available here:
Subject to Change – The information is accurate to the best of our knowledge at the time of printing.
Please refer to www.lincolnelectric.eu for any updated information.
FLUXOFIL 66-EN-19/03/24
www.lincolnelectric.eu
2024-03-19 17:29:30
