AN5006-30 Equipment Introduction

CONTENT
AN5006-30 Product Application

AN5006-30 Composition & Specifications

Administrative Software Architecture

AN5006-30 Card Introduction

AN5006-30 Wires & Cables

Product Positioning

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Product Positioning – Cont.

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Triple Play & xDSL Application
 Triple Play
➢ Data
➢ Voice
➢ IPTV
 xDSL Access Network
Application
➢ ADSL/ADSL2/ADSL2+
➢ VDSL/VDSL2
➢ SHDSL(ATM)/SHDSL(
TDM)

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Application in PSTN Voice Services

 The AN5006-30 can be configured with various management control cards to access
the PSTN voice, NGN voice, and ISDN voice services

➢ PSTN voice access: The subscriber interfaces access the voice services, and aggregate the
services via the TDM bus for signaling interaction with the AN3300-C1 in the central office.
In this way, the voice call service is implemented

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Application in NGN/ISDN Voice Services

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Application in PTN / MSTP

 Network side: the AN5006-30 transmits the subscribers' services to the PTN / MSTP ring
network via the E1 or GE / 10GE interface, and then sends the voice services and data services
to the AN3300-C1 and IP network respectively. The AN3300-C1 aggregates the voice services
and then transmits them to the PSTN via the V5 interface
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Application in FTTC and MSAN
The AN5006-30 can be networked with the FTTC type ONU (e.g. the AN5506-
06) and the OLT (e.g. the AN5116-06B) to provide versatile broadband and
narrow band services. Also, it can be upgraded smoothly to form a PON

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Application in Upgrading to PON

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Application in FTTC and MSAN
DATA CORE
Cabinet 4
V5 IP CORE
AN3300-C1 GE/FE for VoIP&
DATA&Management
E1 GE
Switch AN5006-30

Cabinet 1 Ring Cabinet 3

GE/FE for GE/FE
VoIP& Cabinet 2 for
DATA&M GE/FE VoIP&
anageme for DATA&
nt VoIP& Manage
AN5006-20 DATA& ment
AN5006-30
ADSL2+
Manag
VDSL2 ement AN5006-20
VDSL2
G.SHDSL

ADSL2+ ADSL2+
POTS POTS

POTS FAX POTS

PBX BTS

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Ring Equipment Internal Linkage
FTTCab FTTCab

AN5006-30 AN5006-30

HDT8B
HDT8B

IUPA
GSCA
GSCA

XACA
IUPA
GSCA
GSCA

XACA

PWRD
AD64
POTS
CASA
PWRD
AD64
POTS
CASA
AD64 HDT8B IUPA
Type A POTS 2*E1 3*GE+E1 Type B

IUPA
CASA V5→Eth

HG1A

PWRD
PWRD

AN5006-30 AN5006-30

IUPA
HDT8B
GSCA
GSCA

XACA
IUPA
GSCA
GSCA

XACA

PWRD
AD64
POTS
CASA
PWRD
AD64
POTS
CASA

XACA
VoIP→V5
→Uplink
HG1A

PWRD

IUPA
PWRD

E1

BROADEN YOUR FUTURE

www.fiberhomegroup.com
 CONTENT
AN5006-30 Product Application

AN5006-30 Composition & Specifications

Administrative Software Architecture

AN5006-30 Card Introduction

AN5006-30 Wires & Cables

19/21-inch Indoor Cabinet & PDP

 PDP (3000068)

 PDP (3000063)

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Indoor Cabinet Combine Layout

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Indoor Cabinet Independent Layout

BROADEN YOUR FUTURE

www.fiberhomegroup.com
PDP Terminal Board

(1) -48 V output connector A of branch power (2) Alarm connector for the head of row cabinet
(3) Alarm connector of the indicator LED on the cabinet top (4) -48 V input connector of external power
(5) 0 V input connector of external power (6) Protection earth ground connector
(7) -48 V output connector B of branch power (8) 0 V output connector B of branch power
(9) Lightning protection module for the power supply (10) Selection jumper pin of the PDP operating status indicator LED
(11) 0 V output connector A of branch power (12) Subrack alarm convergence connector (13) Audio alarm buzzer
BROADEN YOUR FUTURE
www.fiberhomegroup.com
AN5006-30 Main Subrack

 Dimension:
335×444.8/482.8×289.8 mm
(with/without ear)
 1+1 Card: Power, Switch, Uplink
cards
 Service Slots: 16 slots
BROADEN YOUR FUTURE
www.fiberhomegroup.com
AN5006-30 Splitter Subrack

 Slots 1 to 8 and slots 11 to 18 are for the splitter cards, which can separate or combine
data and voice services in the main subrack
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Interface Type

AN5006-30

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Interface Type Details
ADSL / ADSL2 / ADSL2+ interface
VDSL / VDSL2 interface
POTS interface
User interface
Voice and data combined interface
SHDSL interface
ISDN 2B+D access U interface
GE interface
Management interface
RJ-45 interface (using RS-232 interface protocol)
RJ-45 interface (sharing the same socket with the environment
Dry contact interface
monitoring interface)
Environment monitoring RJ-45 interface (sharing the same socket with the dry contact
interface interface; using the RS-485 interface protocol)
Power interface DC and AC power supply interface

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Service Interface Cards
Name Function Description
AD32 Provides a 32-line ADSL / ADSL2 / ADSL2+ interface with a build-in splitter.
AD64 Provides two 32-line ADSL / ADSL2 / ADSL2+ interfaces without splitter inside the card.
VD32 Provides a 32-line VDSL / VDSL2 interface with a built-in splitter.
POTS Provides two 32-line POTS interfaces.
BRIA Provides an 8-line ISDN 2B+D access U interface.

Provides a 32-line ADSL2+ data and voice combined interface (on each line, an ADSL2+
CASA
data signal and a voice signal are integrated).

Provides a 32-line VDSL2 data and voice combined interface (on each line, an VDSL2 data
CVSA
signal and a voice signal are integrated).

HD32A Provides a 32-line ATM/EFM-based G.SHDSL subscriber interface.

HDT8B Provides an 8-line TDM-based G.SHDSL subscriber interface and two 4×E1 interfaces.

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Service Interface Cards

Maximum Quantity of
Card Name Cards in Card Function
a Single Subrack
AD32 / AD64 16 Accesses the ADSL / ADSL2 / ADSL2+ services.
VD32 16 Accesses the VDSL / VDSL2 services.
Used together with the XACA card to access the narrowband
POTS 15
voice services.
CASA 16 Accesses the combination the voice and data services.
CVSA 16 Accesses the combination the voice and data services.
HD32A 16 Accesses the G.SHDSL services.
Provides eight channels of TDM services based on Ethernet
HDT8B 16
emulation, and accesses the G.SHDSL and E1 services.
BRIA 15 Provides ISDN voice service.

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Management Control Unit & Other Cards
Card Type Name Function Description
Controls and manages the equipment system; aggregates data services;
Switch control card GSCA
provides a commissioning serial port and an Ethernet port.
IUPA 4×E1 + 3×GE o/e (10/100/1000M) interfaces

HG1A 1×10GE + 4×GE o/e (10/100/1000M) interfaces

Uplink card HGP1A 1×GPON uplink + 2×GE o/e (10/100/1000M) interfaces
HXP1A 1×XGPON + 2×GE o/e (10/100/1000M) interfaces
HEP1A 1×EPON uplink + 2×GE o/e (10/100/1000M) interfaces
Multi-protocol Aggregates the V5 or NGN voice services for collective processing;
XACA
access control card provides a commissioning serial port and an Ethernet port.
Provides power supply for the equipment and performs the lightning
DC power card PWRD
protection function.
Fan control card FAN Facilitates air cooling of the equipment.
Splitter card DSIOA Separates the DSL data services and voice services on the line.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Logical Architecture

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Equipment Specifications
 Mechanical Weight  Access Capability

Item Weight Item (Max ports provided by single

Access Capability
Main Subrack (empty) 13.3 kg subrack)

Main Subrack (fully loaded) 29.1 kg EPON / GPON ports 1

Splitter Subrack (empty) 5.7 kg XG-PON ports 1

Splitter Subrack (fully loaded) 15.3 kg ADSL / ADSL2 / ADSL2+ ports 64×16
VDSL / VDSL2 ports 32×16
 Note: For the AN5006-30 configured POTS ports 64×15Note
with the GSCA card as the switch U ports (ISDN 2B+D) 8×16
control card, an XACA card is
Voice and data combined ports 32×15Note
required to access voice services.
G.SHDSL ports (ATM) 32×16
The XACA card occupies the slot
G.SHDSL ports (TDM) 8×16
No.18; therefore, a single subrack
can support 15 POTS / CASA / CVSA E1 uplink / downlink ports 4×2 / 8×16
cards at most. GE / 10GE ports 8/2
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Power Consumption

 The maximum power consumption of a single AN5006-30 subrack is 1100W.

Cards Power Consumption Cards Power Consumption

GSCA ≤ 40W BRIA ≤ 30W
AD32 ≤ 40W IUPA ≤ 10W
AD64 ≤ 55W HG1A ≤ 15W
VD32 ≤ 72W HGP1A ≤ 15W
POTS ≤ 45W HXP1A ≤ 20W
HD32A ≤ 30W HEP1A ≤ 15W
CASA ≤ 67W XACA ≤ 30W
PWRD ≤ 1W FAN ≤ 200W

HDT8B ≤ 28W CVSA ≤ 70W

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Equipment Room Conditions
 Power Supply
➢ Power voltage: -48V DC (-40V to -57V)

➢ Power supply: ＞1100 W (integrated equipment)

 Working Environment
➢ Ground bearing of the equipment room: >600kg/m2

➢ Grounding resistance: < 5 Ω

➢ Temperature and relative humidity requirements:

✓ Operating temperature: -10℃ to 50℃

✓ Storage temperature: -40℃ to 70℃

✓ Relative humidity: ≤95%

BROADEN YOUR FUTURE

www.fiberhomegroup.com
 CONTENT
AN5006-30 Product Application

AN5006-30 Composition & Specifications

Administrative Software Architecture

AN5006-30 Card Introduction

AN5006-30 Wires & Cables

Software Architecture
 1. NMS (network
management
software)
SNMP

 2. CSS (core
switching
software)

 3. SIS (service
interface
software)

BROADEN YOUR FUTURE

www.fiberhomegroup.com
System Management

 Local Management

➢ CLI (RS232: Serial

console port)

➢ GUI (SNMP: GE/10GE

port)

 Remote Management
or UNM2000
➢ CLI (telnet: GE/10GE
port)

➢ GUI (SNMP: GE/10GE

port)
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Network Mode

 In-band Mode

➢ In the in-band network mode, the management data and service data are transmitted via
the same channel

➢ Advantage: flexible, no additional equipment, low cost

➢ Disadvantage: Network fault leading to the managed network be interrupted

 Out-of-band Mode

➢ In the in-band network mode, the management data and service data are transmitted via
the different channels

➢ Advantage: more reliable

➢ Disadvantage: Provide additional maintenance channel, high cost

BROADEN YOUR FUTURE

www.fiberhomegroup.com
In-band Management Mode

 The typical network

mode for the UNM2000
is characterized by
collective deployment
with a single host. The
UNM2000 is connected
with the NEs in the In-
band mode
Services
SNMP using
also using
GE port
GE port

BROADEN YOUR FUTURE

www.fiberhomegroup.com
 CONTENT
AN5006-30 Product Application

AN5006-30 Composition & Specifications

Administrative Software Architecture

AN5006-30 Card Introduction

AN5006-30 Wires & Cables

Fan Unit
 Fan unit characteristics

➢ High speed

➢ Low noise

➢ 10 fans (1+1 protection)

 Speed control modes

➢ Manual Mode: set by NMS

➢ Intelligent Mode : auto set by temperature

sensor

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Card Structure

PWRD(left)↑ / IUPA(middle)↑
(1) Name (2) LED
(3) Latch (4) Panel (5) Interface GSCA(right)→
(1) LED (2) Name
(3) Latch (4) Panel (5) Interface
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Card Positioning & Slot Mapping Features

Card Type Slot Card Name Quantity

Service interface card 1 to 8, 11 to 18 All service cards 0 ~ 16
Switch control card 9, 10 GSCA 1~2
Multi-protocol
18 XACA 0~1
access control card
Uplink card 19, 20 All uplink cards 0 ~ 1(PON uplink) or 2
Power supply card 21, 22 PWRD 1~2
Splitter card 1 to 8, 11 to 18 (Splitter Subrack) DSIOA 0 ~ 16
Environment monitoring
801 HCU-30 0~1
equipment
BROADEN YOUR FUTURE
www.fiberhomegroup.com
GSCA Card

 Interface
Interface Identifier Meaning Description
CONSOLE Local management serial port Connect with a CLI network management computer.
FE Local management Ethernet interface Used for card debugging.

 Indicator LED
Indicator LED Identifier Meaning Color Status Description
Active and standby status ON The card is in the active status.
M/S Green
indicator LED OFF The card is in the standby status.
Blinking The card is working normally.
ACT Operating status indicator LED Green ON The card is not working normally.
OFF The card is not powered on or is faulty.
ON The card is in the status of resetting or alarming.
ALM Alarm indicator LED Red
OFF The card is working normally.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
AD32 Card

With built-in splitter!

 Interface
Interface Identifier Meaning Description
LINE SCSI 68-core female socket Connected to the MDF via the subscriber cable.
Connected to the MDF via the subscriber cable; or
PSTN SCSI 68-core female socket connected to the POTS32 / POTS card via the PSTN /
POTS cable.
 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
AD64 Card

No built-in splitter!

 Interface
Interface Identifier Meaning Description
SCSI 68-conductor female Connected to the MDF via the subscriber cable; or
LINE1-32, LINE33-64
socket connected to the DSIOA card via the splitter card.

 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
VD32 Card

With built-in splitter!

 Interface
Interface Identifier Meaning Description
LINE SCSI 68-core female socket Connected to the MDF via the subscriber cable.
Connected to the MDF via the subscriber cable; or
PSTN SCSI 68-core female socket connected to the POTS32 / POTS card via the PSTN /
POTS cable.
 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
CASA Card

 Interface
Interface Identifier Meaning Description
Connects to the MDF via the subscriber cable. The pins
LINE SCSI 68-core female socket
33, 34, 67 and 68 are not used.
 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
CVSA Card

 Interface
Interface Identifier Meaning Description
Connected to the MDF via the subscriber cable. The pins
LINE 68-pin SCSI female socket
33, 34, 67 and 68 are not used.

 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
BRIA Card

 Interface
Interface Identifier Meaning Description
Connects to the MDF via the subscriber cable. Provides
LINE1-8 68-pin SCSI female socket
eight ISDN 2B+D access U interfaces.

 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
HDT8B Card

Interface Identifier Meaning Description

E1 (1-4) The card provides two 4×E1 interfaces for carrying E1 narrow-
E1 interface band data services. The two interfaces can act as either uplink
E1 (5-8)
ports or downlink ports.
G.SHDSL The card provides an 8-line TDM-based G.SHDSL interface
LINE
interface for connection with the SHDSL Modem.

 Provides an 8-line G.SHDSL interface and two 4-line E1 uplink interfaces

 Implements the Ethernet emulation function for the TDM service when used together with the office end
TDM card, and supports the timeslot cross-connect aggregation of Nx64 kbit/s (the minimum granularity
is 64 kbit/s)

 Supports symmetric bidirectional communication

BROADEN YOUR FUTURE
www.fiberhomegroup.com
HD32A Card

 Interface
Interface Identifier Meaning Description
Provides a 32-line G.SHDSL interface based on the
LINE G.SHDSL interface
ATM/EFM mode for connection with the SHDSL Modem.

 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
XACA Card

 Interface
Interface Identifier Meaning Description
D Debugging interface Reserved for FiberHome use.
GE/FE Local management Ethernet interface Used for card debugging.

 Indicator LED
Indicator LED Identifier Meaning Color Status Description
Blinking The card is working normally.
ACT Operating status indicator LED Green ON The card is not working normally.
OFF The card is not powered on or is faulty.
ON The card is in the status of resetting or alarming.
ALM Alarm indicator LED Red
OFF The card is working normally.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
POTS Card

 Interface
Interface Identifier Meaning Description
Connected to the MDF via the subscriber cable;
POTS1-32,
SCSI 68-core female socket or connected to the AD32 / VD32 card via the
POTS33-64
PSTN / POTS cable.

 Indicator LED
Indicator LED
Meaning Color Status Description
Identifier
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
IUPA Card

 Interface

Interface Identifier Meaning Description

Used for connection with the IP network.

Supports the optical / electrical module; the
GE1 to GE3 GE uplink port
electrical module is auto negotiated to rates
10/100/1000 Mbit/s.

E1 E1 subscriber interface Used for connection with the E1 interface cable.

BROADEN YOUR FUTURE

www.fiberhomegroup.com
IUPA Card
 Indicator LED
LED Meaning Color Status Description
Operating Blinking The card is working normally.
ACT status Green ON The card is not working normally.
indicator LED OFF The card is not powered on or is faulty.
ON Card is being reset for self-inspection or has an urgent alarm.
ALM Alarm LED Red
OFF Card is not reset for self-inspection and has no urgent alarm.
Blinking The uplink port is transmitting / receiving data.
Port status The uplink port is normally connected with the upper-layer
ON
LNK 1 to 3 indicator Green equipment, for example, the switch.
LED The uplink port is not connected with the upper-layer
OFF
equipment, for example, the switch.
Port status ON The LOS alarm exists in the 1st to the 4th E1 links.
LOS 1 to 4 indicator Red
OFF No LOS alarm exists in the 1st to the 4th E1 links.
LED
BROADEN YOUR FUTURE
www.fiberhomegroup.com
HG1A Card

 Interface
Interface Identifier Meaning Description

Used for connection with the IP network.

XE 10GE uplink optical interface
Supports the optical module.

Used for connection with the IP network.

Supports the optical / electrical module; the
GE1 to GE4 GE uplink port
electrical module is auto negotiated to rates
10/100/1000 Mbit/s.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
HGP1A Card

 Interface

Interface Identifier Meaning Description

Used for connection with the IP network.

Supports the optical / electrical module; the
GE1 and GE2 GE uplink port
electrical module is auto negotiated to rates
10/100/1000 Mbit/s.

GPON GPON uplink port (SC) Used for uplink to the OLT equipment.
CONSOLE Debugging serial port Reserved for FiberHome use.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
HGP1A Card
 Indicator LED
LED Meaning Color Status Description
Blinking The card is working normally.
Operating status
ACT Green ON The card is not working normally.
indicator LED
OFF The card is not powered on or is faulty.
ON Is being reset for self-inspection or has an urgent alarm.
ALM Alarm indicator LED Red
OFF Is not reset for self-inspection and has no urgent alarm.
Blinking This uplink port is transmitting / receiving data.
This uplink port is normally connected with the upper-
Port status indicator ON
LNK 1 to 2 Green layer equipment such as the switch.
LED for GE1 and GE2
This uplink port is not connected with the upper-layer
OFF
equipment such as the switch.
Optical signal status Blinking The LOS alarm occurs at the GPON uplink port.
LOS Red
indicator LED OFF No LOS alarm occurs at the GPON uplink port.
Register status ON Registration of the MDU succeeds.
PON Green
indicator LED OFF Registration of the MDU fails or is not started.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
HXP1A Card

 Interface

Interface Identifier Meaning Description

Used for connection with the IP network.

Supports the optical / electrical module; the
GE1 and GE2 GE uplink port
electrical module is auto negotiated to rates
10/100/1000 Mbit/s.

XG-PON XG-PON uplink interface (SC/UPC) Used for uplink to the OLT equipment.
CONSOLE Debugging serial port Reserved for FiberHome use.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
DSIOA Card (Splitter Card)

 Interface

Interface Identifier Meaning Description

DSL SCSI 68-conductor female socket Used for connection with the AD64 card.
PSTN SCSI 68-conductor female socket Used for connection with the POTS card.
Used for connection with the subscriber
LINE SCSI 68-conductor female socket
CPE.

➢ The total power consumption of DSIOA card is 0W

BROADEN YOUR FUTURE

www.fiberhomegroup.com
PWRD Card
 Interface
Interface Meaning Description
Used for connection with the 0 V branch
0V DC power high potential input interface
power rail output connector of the PDP.
Used for connection with the -48V branch
-48V DC power low potential input interface
power rail output connector of the PDP.
ESC Environment monitoring interface Used for receiving dry contact signals.
ALM Alarm interface Used for outputting the alarm information.

 Indicator LED
LED Meaning Color Status Description
Operating ON The card is working normally.
PWR status Green
OFF The card is not powered on or is faulty.
indicator LED
Alarm ON The card is being reset or has alarms.
ALM Red
indicator LED OFF The card is working normally.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
 CONTENT
AN5006-30 Product Application

AN5006-30 Composition & Specifications

Administrative Software Architecture

AN5006-30 Card Introduction

AN5006-30 Wires & Cables

Power Cable
 Cabinet Power Cable

Specification (408000076 / Specification (408000021 /

Parameter Item
408000075 / 408000041) 408000020 / 408000019)
Double-sheathed heat-resistant Double-sheathed heat-resistant
Cable type (withstanding a temperature up (withstanding a temperature up to
to 105℃) single-core soft cable 105℃) single-core soft cable
Color Blue, black, yellow / green Blue, black, yellow / green
Maximum current 80 A 100 A
Conductor crosssectional area 16 mm2 25 mm2

 Subrack Power Cable

 Cabinet grounding cable
(1) Blue, -48 V 40A
2×6 mm2 ➢ 40A / 10 mm2
(2) Black, 0 V
(3) Yellow / green,  Subrack grounding cable
protection earth
ground ➢ 32A / 4 mm2
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Optical Fiber Jumper

LC/PC SC/(U)PC

(1) Anti-dust cap (2) Connector (3)Latch

Cable Connector Connection Description

LC/PC connector All GE / XGE interfaces
The GPON interface of the HGP1A card and the EPON interface of the
Fiber jumper SC/PC connector
HEP1A card
SC/UPC connector The XG-PON interface of the HXP1A card
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Splitter Card Connection Cable

 The connection with

Splitter Subrack

➢ The AD64 card, the

POTS card and the
DSIOA card should
be arranged adjacent
in the same column
and the same row in
the subracks.

 Type No. 409000069R1A

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Splitter Card Connection Cable
 The connection
without Splitter
Subrack
➢ When connecting the
splitter card connection
cable and the DSL
subscriber cable, it is
recommended that you
should connect the
DSL subscriber cable
first.

 Type No. 409000072R1A

BROADEN YOUR FUTURE

www.fiberhomegroup.com
PSTN/POTS Cable
 The AD32 / VD32 PSTN
interface is connected with
the POTS card of the
POTS32 / POTS card.
Here we introduce the
connection of the PSTN /
POTS cable, taking the
VD32 card and the POTS
card as an example

 PSTN / POTS Cable

(409000072R1A)

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Subscriber Cable
Pin Wire Color Pin Wire Color Pin Wire Color
1/35 W/Bl 12/46 R/Br 23/57 Black/G(W)
2/36 W/O 13/47 R/Bl(W) 24/58 Black/Br(W)
3/37 W/G 14/48 R/O(W) 25/59 Y/Bl
4/38 W/Br 15/49 R/G(W) 26/60 Y/O
5/39 W/Bl(W) 16/50 R/Br(W) 27/61 Y/G
6/40 W/O(W) 17/51 Black/Bl 28/62 Y/Br
7/41 W/G(W) 18/52 Black/O 29/63 Y/Bl(W)
8/42 W/Br(W) 19/53 Black/G 30/64 Y/O(W)
 Subscriber 9/43 R/Bl 20/54 Black/Br 31/65 Y/G(W)
Cable 10/44 R/O 21/55 Black/Bl(W) 32/66 Y/Br(W)
(3695460R1A) 11/45 R/G 22/56 Black/O(w) -

1st Color: W: White; R: Red; Black; Y: Yellow

2nd Color: Bl: Blue; O: Orange; G: Green; Br: Brown

BROADEN YOUR FUTURE
www.fiberhomegroup.com
Independent Access Scheme
Connector Connection Description

Connected to LINE / PSTN interface of the AD32

/ VD32 card.
Connected to POTS1-32 / POTS33-64 interface
of the POTS card.
Connected to PSTN / LINE interface of the
DSIOA card
68-pin SCSI
male plug Connected to LINE interface of the CASA card
Connected to LINE interface of the CVSA card
Connected to LINE interface of the HD32A card.
Connected to LINE interface of the HDT8B card.
Connected to LINE interface of the HDT8B card
Connected to LINE1-8 interface of the BRIA card
32 twisted Connected to MDF
pairs
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Flexible Service Configuration Scheme for the AD32 /
VD32 Card

BROADEN YOUR FUTURE

www.fiberhomegroup.com
1:1 Service Configuration Scheme for the AD32 / VD32
Card

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Flexible Service Configuration Scheme for the AD64 /
DSIOA Card
 As shown in picture, the POTS interface of the
POTS card and the LINE and PSTN interfaces of
the DSIOA card are connected to the MDF via the
subscriber cable for flexible line connection via the
MDF.

 Among them, the POTS1-32 interface of the POTS

card and the PSTN interface of the left DSIOA card,
as well as the POTS33-64 interface of the POTS
card and the PSTN interface of the right DSIOA card,
can be connected respectively with one or several of
the 32 twisted pairs, and the LINE interfaces of the
DSIOA card access the voice and data services to
allow flexible configuration of services for this
subscriber group.
BROADEN YOUR FUTURE
www.fiberhomegroup.com
1:1 Service Configuration Scheme for the AD64 /
DSIOA Card

 As shown in picture, only the

LINE interface of the DSIOA
card is connected to the MDF
via the subscriber cable, and all
the other cables are inside the
equipment.

BROADEN YOUR FUTURE

www.fiberhomegroup.com
E1 Interface Cable - 75 Ω Unbalance

Coaxial Cable
E1 Signal Pin Number Cable Property
Number
10 Core wire
R1 1
1 Shielded wire
11 Core wire
T1 2
2 Shielded wire
12 Core wire
R2 3
3 Shielded wire
13 Core wire
T2 4
4 Shielded wire
14 Core wire
R3 5
5 Shielded wire
15 Core wire
T3 6
(1) DA26P-8-core coaxial cable (75Ω) / 6 Shielded wire
DA26P-8-pair balancing cable (120 Ω) 16 Core wire
R4 7
7 Shielded wire
(2) Cable label
17 Core wire
(3) DA-26P-type connector T4 8
8 Shielded wire

BROADEN YOUR FUTURE

www.fiberhomegroup.com
E1 Interface Cable - 120 Ω Balance
E1 Signal Pin Number Twisted Pair Number Color

10 Orange
R1 7
1 Red
11 Blue
T1 6
2 Red
12 Green
R2 8
3 Red
13 Blue
T2 1
4 White
14 Gray
R3 5
5 White
15 Orange
T3 2
6 White
16 Green
R4 3
7 White
17 Brown
T4 4
8 White
BROADEN YOUR FUTURE
www.fiberhomegroup.com
Serial Console Cable

 Pin Definition

DB-9 RJ-45
Connected
Connector Connector
Signal
Pin Pin

Tx of the
2 3
equipment

GND 5 4/5

Rx of the
3 6
equipment

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Dry Contact Cable
Pin of the Local End Wire Color Opposite End
1 Orange Earth grounding Example:
2 White / orange Dry contact equipment level output end 1 Infrared
3 Green Dry contact equipment level output end 2 Smoke
4 White / green Dry contact equipment level output end 3 Power
5 Blue Dry contact equipment level output end 4 Humidity
6 White / blue Dry contact equipment level output end 5 Temperature

7 Brown Dry contact equipment level output end 6 Fans

8 White / brown Dry contact equipment level output end 7 Vibration

BROADEN YOUR FUTURE

www.fiberhomegroup.com
Main Subrack Alarm Cable

Pin of the Local End Wire Color Pin of the Opposite End

1 White / orange 1

2 Orange 2

3 White / green 3

4 Blue 4

5 White / blue 5

6 Green 6
 Alarm Cable 7 White / brown 7
(3695095R4A) with
8 Brown 8
RJ45 connector

BROADEN YOUR FUTURE

www.fiberhomegroup.com
+THANKS!+