4.

Point the remote directly at the Bra

Step 2: Program your remote front panel of the device you The
want to control. Press SLOW on the s
To use this universal remote with your home entertainment the remote and wait 5 seconds. bran
system, first you need to program it to control your devices. The remote is testing a batch of
10 codes on your device. TIP
There are four ways you can program the universal remote to the
operate your devices:

RCR6473R
rece
box
• The Auto Code Search goes automatically through all the Did your device turn off? AU
codes for the device you’re trying to control. It’s the easiest pro
YES: Go to step 5.
Universal Remote Control method, but it can sometimes take longer than some of the
other programming methods. NO: Press SLOW again. The remote tests the next batch of
Rea
Owner’s Manual 10 codes.
To c
nee
Manual del Propietario (parte posterior) • The Brand Code Search searches through the codes for
Keep pressing SLOW every 5 seconds until your device tha
select brands of devices. It’s not as easy as the auto code
search, but it can be faster. turns off. If th
FCC Statement: sep
This device complies with part 15 of the FCC Rules. Operation is subject • The Direct Code Entry lets you enter a code from the the
to the following two conditions: (1) This device may not cause harmful 5. When your device turns off, press
the
interference, and (2) this device must accept any interference received, accompanying code list for your brand of device. It’s not as the SKIP BACK key on the remote
including interference that may cause undesired operation. easy as the other methods, but it’s potentially the fastest To e
Note: This equipment has been tested and found to comply with the and wait at least 2 seconds.
method. Cod
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. The remote tries the last of the
These limits are designed to provide reasonable protection against previous ten codes. No
harmful interference in a residential installation. This equipment • The Manual Code Search lets you manually go through
hol
generates, uses and can radiate radio frequency energy and, if not all the codes for the device you’re trying to control. Did your device turn on?
installed and used in accordance with the instructions, may cause the
harmful interference to radio communications. However, there is no YES: Press the OK key. You’re
guarantee that interference will not occur in a particular installation. If 1.
this equipment does cause harmful interference to radio or television Auto Code Search done! You’ve programmed this
reception, which can be determined by turning the equipment off and on, device key.
the user is encouraged to try to correct the interference by one or more of The Auto Code Search goes automatically through all the
the following measures: codes for the device you’re trying to control. When you find NO: Press SKIP BACK again. The remote tests the next
• Reorient or relocate the receiving antenna. the one that operates your device, you can stop the search and code in the batch.
• Increase the separation between the equipment and receiver.
store that code.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Keep pressing SKIP BACK every 2 seconds until your 2.
device turns back on. When it does, press OK.
• Consult the dealer or an experienced radio/TV technician for help. TIPS: Each device key is associated with a type of device—
Caution: Any Changes or modifications not expressly approved by the the TV is preset to search for TVs, SAT•CBL•STRM for Note: If you accidentally press the SKIP BACK key after your
party responsible for compliance could void the user’s authority to device turns on, press the SKIP FWD key. Then, wait two
operate this equipment. satellite receivers, digital TV converters, streaming players,
or cable boxes, DVD for DVD players, and DVR•AUX1 for seconds to see if your device turns off again.
Industry Canada Regulatory Information DVRs, AUDIO for audio receivers, and VCR•AUX2 for VCRs.
This class B digital apparatus complies with Canadian ICES-003 To program a device key for a different type of device, see NOTES
Avis d’Industrie Canada
Cet appareil numérique de la classe B est conforme a la nome
the Reassigning the DVR•AUX1 and VCR•AUX2 Keys section. 3.
Throughout the programming of each key, be sure to keep
NMB-003du Canada To control combo devices, like TV/DVDs and TV/VCRs, you the remote pointed at the IR sensor of the device you are
need to program each key separately. Each key will control currently programming the remote to control.
that part of the combo device.
Step 1: Install your batteries If the original remote control that came with your device has
Test the remote with the device to make sure the
device key is programmed with the correct code for
separate ON and OFF keys (instead of a single POWER key), maximum functionality. If some features don’t work, try
Your universal remote requires two AAA alkaline batteries (not the Auto Code Search might not work with that device. Try a different code. See the “Testing the Code for Maximum
included). the Direct Code Entry method described later in this manual. Functionality” section below for more information.
To install the batteries: To exit without saving a new code at any point in the Auto During the Auto Code Search, the remote ignores
1. Remove the battery Code Search, press the CLEAR key. keypresses that aren’t part of the search. 4.
compartment cover. Note: To program for a DVD player, you must first press and The search times out after two minutes (the LED blinks four
hold the DVD key. While you’re holding the DVD key, press
2. Insert the batteries, matching the number 3 key. Then release both keys.
times and turns off, and the last programmed code under
the (+) and (–) marks inside the that device key is retained).
battery compartment. The indicator light blinks four times and turns off when the
1. Manually turn on the device you
remote has gone through all the codes. The remote exits
5.
3. Push the battery cover back into want to control.
the Auto Code Search. If your device hasn’t turned off yet,
place. try a different search method.

Battery Precautions: 2. Press and hold the device key you want to program. While
Not
• Do not mix old and new batteries. you’re holding down the device key, use your other hand Testing the Code for Maximum Functionality
exa
• Do not mix alkaline, standard (carbon-zinc) or to press and hold the remote’s POWER key at the same 1. Try a variety of the device’s functions with the remote. If
rechargeable (nickel-cadmium) batteries. time. some device features don’t work, go to the next step to try 6.
• Always remove old, weak or worn-out batteries promptly a different code.
and recycle or dispose of them in accordance with Local
2. Repeat the Auto Code Search Method from the beginning.
and National Regulations. When your device turns off, do not stop searching.
Instead, with the unit now off, continue to press the SLOW
key every 5 seconds until the unit turns back on.
Battery Saver
3. Once the unit turns back on, press the SKIP BACK key on
Your universal remote control saves battery power by the remote every 2 seconds until your device turns off
automatically turning off if any key is pressed for more than again. When your device turns off again, press the OK key.
60 seconds. This saves your battery life should your remote 3. Wait until the remote’s indicator
get stuck in a place where the keys remain depressed, such as LED comes on and stays on. 4. Test the key’s functionality again by attempting to control
between sofa cushions. Then release both keys. a variety of the device’s functions. If the code that has
been stored controls the majority of the device’s functions,
programming is complete. If the code stored does not give
maximum functionality, try another code.
 Brand Code Search NOTES 3. Press and hold the device key you want to program (the No
The Brand Code Search goes through only the codes for one of indicator light comes on). hol
the select brands listed in the accompanying code list. If your Throughout the programming of each key, be sure to keep num
the remote pointed at the IR sensor of the device you are While you’re holding down the device key, use your other
brand of device is listed, this search can be very quick and easy.
currently programming the remote to control. hand enter the first five-digit code for your brand in the
TIPS: Each device key is associated with a type of device— Test the remote with the device to make sure the device
code list (the indicator light goes off after the first digit). 1. M
the TV is preset to search for TVs, SAT•CBL•STRM for satellite w
key is programmed with the correct code for maximum
receivers, digital TV converters, streaming players, or cable
boxes, DVD for DVD players, and DVR•AUX1 for DVRs, functionality. If some features don’t work, try a different
AUDIO for audio receivers, and VCR•AUX2 for VCRs. To code. See the “Testing the Code for Maximum Functionality”
program a device key for a different type of device, see the section below for more information.
Reassigning the DVR•AUX1 and VCR•AUX2 Keys section.
During the Brand Code Search, the remote ignores
2. P
h of To control combo devices, like TV/DVDs and TV/VCRs, you y
keypresses that aren’t part of the search.
need to program each key separately. Each key will control p
that part of the combo device. The search times out after two minutes (the indicator light
If the original remote control that came with your device has blinks four times and turns off, and the last programmed
separate ON and OFF keys (instead of a single POWER key), code under that device key is retained).
the Brand Code Search might not work with that device. Try The indicator light blinks four times and turns off when the
the Direct Code Entry method described later in this manual. remote has gone through all the codes. The remote exits the
To exit without saving a new code at any point in the Brand Brand Code Search. If your device hasn’t turned off yet, try a
Code Search, press the CLEAR key. different search method.
Note: To program for a DVD player, you must first press and
hold the DVD key. While you’re holding the DVD key, press 3. W
the number 3 key. Then release both keys. Indicator light c
Testing the Code for Maximum Functionality
4. When you’ve finished entering b
1. Manually turn on the device you 1. Try a variety of the device’s functions with the remote. If the five-digit code, keep holding
want to control. some device features don’t work, go to the next step to try down the device key and look at
a different code. the indicator light.
4. P
w
2. Repeat the Brand Code Search from the beginning. When Is the indicator light on? s
.......
..... ........ ........ 0,
....... 5, 1006 ..............
.....
..
the device turns off for the first time, don’t press the OK
2.
....... ..............

YES: You’re done! You’ve

....... ....... 1167 ..................... ..
....... .............. ....... 2, .......................
iral ....... . 1081 .............. .......
Adm nt ....... ....... ....... ..................... .......
..................... 6, 107

key, which would store the same code. Instead, with

.......

Find your device’s brand in the

Adve ....... .............. ............................ 1015 0, 10
Aiko ....... .............. ..................... .....
h n ....... 1018 5, 1
Akai tron Actio ..................... .............. 1, 1087 .
s
Searc
....... ....... ... 1045 ..... .......

List
d Code Alba rica .......
Bran e. Ame ..................... ....... ..................... ....... .....
....... ....... ....
the Guid Anam....... al....... .......

Code
’s ....... ....... ....... .......
using AOC Digitx ....... ....... ....... ....... .............. .

gos
ing the User
ramm in Apexiovo .............. ....... ....... ....... ...............
.......

programmed this device key.

ned ando Aud ....... ....... .............. ....... ....... .......
prog

Códi
for outli r utiliz tado ....... tura ....... ....... ....... ....... .....
used od rama as, resal ....... ....... ....... .
Aven n....... ell ..................... ....... .......

the unit now off, continue to press the SKIP FWD key
s are meth

Brand Code list section of the

prog
para de marc Axio & How....... ....... ....... ....... ..

a de
Entry
d Code and ados os Bell ..................... ....... ....... .......
Bran utiliz de códig ....... ....... ....... .....

List
rio. cas BenQ ford c ....... ....... ....... ....... ...
as son da
usua Mar Brad soni ....... ....... ....... .......
marc y entra del
las ueda
de ....... ....... ....... .......
Brok le .............. .......
os de búsq en la
guía igos .......
Cand ivale ....... ....... .............. ......
de Cód Carn er....... ....... ....... .............. ....
Los
códig
dos de Carv ra ....... g ....... ....... ...................
los
méto Lista Cele ghon ....... ....... ....... ...
e List/
Vizio
Chan en ....... ....... tions .......
Cod .....

repeatedly until the unit turns back on.

Toshiba Citiz on.......ial Solu .......

accompanying code list. Circle

nd TV Sony ....... .......
Clari merc ....... ....... .......
Bra Sharp 9 Com erto ....... ...............

our
8 .......

NO, it blinked four times and turned off: You have

g
Conc ec .............. ....... .......
ic Samsun
ox Panason 7 Cont ....... ....... .......
Magnav 6 Craig ley ....... ......................
Cros n ....... es
JVC
Philips
5 Crowis Math
.......
....... .......
RCA Insignia 4 .......
Curt ....... .............. .....
GE 3 Toshiba ....... ....... ...................
PROSCA
N
2 Sympho
nic
....... ....... .......
1 CXC on ....... .......

the number for your brand and

VCR Sony .......
0 Sharp 9 Cytr oo .............
ic
8 Daew....... .......

either entered a code number that is not in the code lists

hi Panason Dell n .......Visio
ox Mitsubis 7 Deno ond ........
Magnav 6

3.
Diam ont d .

Once the unit turns back on, you have found another code
JVC
Philips
5 Dum bran ..
RCA Samsun
g
4 Dura .......
GE 3 Toshiba Dwin x .....
PROSCA
N
2 D Sony Dyne rogr
1 DV Sharp
Elect roh

keep the list handy.

0 Samsun
g
9 Elect rso
Pioneer 8 Eme ..
....... r
7

or missed a step in the code entry procedure. Try step 3

ic
ox Panason Emp
Magnav 6 Env
Philips
5

that operates the device. Press the OK key.

JVC ESA
RCA Apex 4 Fi
GE 3 ic F
PROSCA
N
2 BLE AMNIO
Panason

1 /CA c Magnav
ox ADB

0 SAT Scientifi
Philips
9
Hughes
Network
Atlanta
8
7

again.
General nts Systems
Dish
Network Instrume
Systems/ 6
DirecTV
Echostar 5
RCA Motorol
a
4
GE 3
PROSCA
N
2
1

4. Test the key’s functionality again by attempting to control

0

3. Press and hold the device key you want to program. While a variety of the device’s functions. If the code that has
NOTES
p you’re holding down the device key, use your other hand to been stored controls the majority of the device’s functions,
press and hold the remote’s POWER key at the same time. programming is complete. If the code stored does not give Remember to enter the code for future reference in the box
maximum functionality, try another code. provided in the Code Retrieval section of this manual.
If your brand isn’t listed in the code list, use one of the Code
Search methods to program the remote control. (Refer to the T
Auto and Manual Code Search methods.) t
If you release the device key any time during the Direct Code
Entry procedure, the indicator light blinks four times, and NO
the process is exited. The last programmed code under the
Direct Code Entry device key is retained.
Thr
4. Wait until the remote’s indicator Direct Code Entry lets you enter a code from the accompanying poi
comes on and stays on. Then release code list for your brand of device. It’s not as easy as the other Test the remote with the device to make sure the device the
ur both keys. methods, but it’s potentially the fastest method. key is programmed with the correct code for maximum Tes
functionality. If some features don’t work, try a different code key
TIPS: Each device key is associated with a type of device—the in the list. fun
TV is preset for TVs, SAT•CBL•STRM for satellite receivers, cod
he
5. Look at the number you circled for digital TV converters, streaming players, or cable boxes, DVD sec
your device’s brand code number. for DVD players, and DVR•AUX1 for DVRs, AUDIO for audio
,
Press that number on the remote receivers, and VCR• AUX2 for VCRs. To program a device key for Manual Code Search Dur
a different type of device, see the Reassigning the DVR•AUX1 The Manual Code Search takes you one-by-one through all the key
keypad.
and VCR•AUX2 Keys section. codes for the device you’re trying to control. When you find the The
one that operates your device, you stop the search and store that blin
To control combo devices, like TV/DVDs and TV/VCRs, you need
code. cod
Note: For single-digit brand codes, press the 0 key first (for to program each key separately. Each key will control that part
of the combo device. TIPS: The Manual Code Search method may take a long time The
example: 0, 5 for “5”) because the remote searches through all of the codes in its
If rem
o try 6. Point the remote directly at the 1. Manually turn on the device you memory one-by-one. If your brand is listed in the Brand Codes Ma
front panel of the device you want want to control. or the Code Lists, first try the Brand Code Search or the Direct ad
to control. Press SKIP FWD on the Code Entry method.
ing. Each device key is associated with a type of device—the TV is
remote and wait 2 seconds. The
remote is testing a single code for preset to search for TVs, SAT•CBL•STRM for satellite receivers, Test
OW
your device’s brand. 2. Find the Code List that came with digital TV converters, streaming players, or cable boxes, DVD 1. T
..... ........ ........ 0, .....
....... ..
....... .............. ....... 5, 1006 ..............
....... ....... 1167 ..................... ..
....... .............. ....... 2, .......................
iral ....... . 1081 .............. .......
Adm nt ....... ....... ....... ..................... .......
....... ..................... 6, 107
Adve ....... .............. ............................ 1015 0, 100

for DVD players, and DVR•AUX1 for DVRs, AUDIO for audio
Aiko ....... .............. ..................... .....
h n ....... 1018 5, 1
Akai tron Actio ..................... .............. 1, 1087 .
s
Searc

s
....... ....... ... 1045 ..... .......

List
d Code Alba rica .......
Bran e. Ame ..................... ....... ..................... ....... .....

the remote. Locate the section for

the Guid ....... ....... ....... ....
Anam....... al.......

Code
’s ....... ....... ....... .......
using AOC Digitx ....... ....... ....... ....... .............. .

gos
ing the User
ramm in Apexiovo .............. ....... ....... ....... ................
ando .......
prog ned Aud ....... ....... .............. ....... ....... .......

Códi
Did your device turn off?
for outli r utiliz tado ....... tura ....... ....... ....... ....... .....
used od rama as, resal ....... ....... ....... .
s are meth prog Aven n....... ell ..................... ....... .......
....... ....... ....... ..

receivers, and VCR•AUX2 for VCRs. To program a device key for a

para de marc Axio & How.......

a de
Entry

on
d Code and ados os Bell ..................... ....... ....... .......
Bran utiliz de códig ....... ....... ....... .....

List
cas

s
rio. BenQ ford c ....... ....... ....... ....... ...
as son da
usua Mar Brad soni ....... ....... ....... .......
marc y entra del de .......
Brok le .............. .......
....... ....... .......

the type of device you’re trying to

las ueda
os de búsq en la
guía igos .......
Cand ivale ....... ....... .............. ......
de Cód Carn er....... ....... ....... .............. ....
Los
códig
dos de Carv ra ....... g ....... ....... ...................
los
méto Lista Cele ghon ....... ....... ....... ...
e List/
Vizio
Chan en ....... ....... tions .......
Cod Toshiba Citiz on.......ial Solu ....... ......
nd TV ....... .......

different type of device, see the Reassigning the DVR•AUX1 and

Sony Clari merc ....... ....... .......
Bra Sharp 9 Com erto ....... ...............
ic Samsun
g
8 .......
Conc ec .............. ....... .......
ox Panason 7 Cont ....... ....... .......
6 Craig ley ....... ......................

program, and find your brand in

Magnav
Cros n ....... es
Philips
5 .......

YES: Press the OK key to store the code. You’re done! 2. R

JVC ....... .......
Crowis Math
RCA Insignia 4 .......
Curt ....... .............. .....
GE 3 Toshiba ....... ....... ...................
PROSCA
N
2 Sympho
nic
....... ....... .......
1 VCR Sony CXC on ....... .......

VCR•AUX2 Keys section.

.......
0 9 Cytr oo .............

key.
Sharp

hi Panason
ic
8 Daew.......
Dell n .......Visio
.......
ox Mitsubis 7 Deno ond ........
Magnav 6

that section. Circle the codes for

Diam ont d .
JVC
Philips
5 Dum bran ..

You’ve programmed this device key. t

RCA Samsun
g
4 Dura .......
GE 3 Toshiba Dwin x ......
PROSCA
N
2 D Sony Dyne rogr
1 DV Sharp
Elect roh
0 Samsun
g
9 Elect rso
Pioneer 8 Eme ..
....... r
ox Panason
ic
7 Emp

To control combo devices, like TV/DVDs and TV/VCRs, you need

6

rol
Magnav Env
5

your brand and keep them handy.

Philips ESA
JVC
4

d
Apex
Fi
RCA
GE 3 ic F
PROSCA
N
2 BLE AMNIO
Panason

1 /CA c Magnav
ox ADB

0 SAT Scientifi
Philips
9

NO: Press SKIP FWD again. The remote tests the next
Hughes
Network
Atlanta
8
General nts Systems 7

to program each key separately. Each key will control that part
Dish
Network
Systems/
Instrume
6
DirecTV
Echostar 5
a
4

I
RCA Motorol
GE 3
PROSCA
N
2
1
0

ons, code for your brand. of the combo device. F

give Keep pressing SKIP FWD every 2 seconds until your To exit without saving a new code at any point in the Manual
device turns off. When it does, press OK. Code Search, press the CLEAR key.
e Note: To program for a DVD player, you must first press and 3. Once the unit turns back on, you have found another code Co
hold the DVD key. While you’re holding the DVD key, press the that operates the device. Press the OK key. Advanced Functions Onc
number 3 key. Then release both keys. 4. Test the key’s functionality again by trying a variety of you
er
functions. If the code controls the majority of the device’s Programming the DVR•AUX1 and used
functions, programming is complete. If the code stored the c
1. Manually turn on the device you does not give maximum functionality, try another code. VCR•AUX2 Keys To Control Other Devices belo
want to control. The DVR•AUX1 key defaults to control a DVR, and the your
VCR•AUX2 key defaults to control a VCR. If you want these rem
Tour of the Remote keys to control different kinds of devices (an additional TV, five-
DVD, satellite or cable box, for example), you must reassign it. will
2. Press and hold the device key you want to program. While
In most cases, the keys on
1. Press and hold the key you want to program (DVR•AUX1 agai
you’re holding down the device key, use your other hand to or VCR•AUX2 key. The indicator light turns on. met
this remote perform the same whic
press and hold the remote’s POWER key at the same time. 2. While holding down the DVR•AUX1 or VCR•AUX2 key,
functions as the keys on your
original remotes once you’ve press and release the number key on the keypad for the
programmed this remote to device you want to control (see the chart below). The
operate your components. indicator light turns off.
Many keys on this remote
DVR•AUX1 or VCR•AUX2 KEY CONTROLS:
have other functions as well.
Additional TV press 1
Device keys (TV,
SAT•CBL•STRM, DVD, VCR or DVR press 2
3. Wait until the remote’s indicator light DVR•AUX1, AUDIO, Additional DVD press 3
ght comes on and stays on. Then release VCR•AUX2) put the remote in 2.
both keys. the right mode to control your Additional audio device press 4
device. Additional streaming player, satellite press 5
4. Point the remote directly at the front panel of the device you SLOW•ASPECT key changes
receiver, cable box, or DTV converter
want to control. Press SKIP FWD on the remote and wait 2 3.
between full- and widescreen
seconds. The remote is testing a single code for your device. 3. Release the DVR•AUX1 or VCR•AUX2 key. The indicator 4.
formats on HDTVs; it also
light blinks four times and then turns off. The DVR•AUX1
activates slow playback on
Did your device turn off? or VCR•AUX2 key is now set to control the device type you
DVDs and DVRs.
selected.
YES: Press the OK key to store
the code. You’re done! You’ve GUIDE•HOME and MENU put 4. Follow the directions in the auto, brand, direct entry,
ts programmed this device key. the remote in menu/guide or manual code search to program the DVR•AUX1 or
3 mode; they also access the VCR•AUX2 key. No
NO: Press SKIP FWD again. The same features as the keys on DV
remote tests the next code for your original remotes.
your device. Volume Punch-Through the
CLEAR exits remote Volume Punch-through allows the VOL and MUTE keys, sa
x Keep pressing SKIP FWD every 2 programming; it also when pressed in SAT•CBL•STRM, DVD, DVR or VCR modes, TV
seconds until your device turns off. performs the same functions to “punch through” to either TV or AUDIO, whichever was
When it does, press OK. 5.
de as on your original remotes. accessed last. Volume Punch-Through occurs automatically
he and allows you to control the volume without exiting the
TIP: Because there are so many codes, you may have to press Arrow keys act as navigation current mode. (If either AUX key has been programmed with a
the SKIP FWD key many times—possibly hundreds of times. keys in device guides and TIP
TV or AUDIO code, volume can punch through to these devices
de menu systems. as well.) CL
NOTES
The INPUT and — (dash) key Note: Volume Punch-Through does not occur in cases where No
e Throughout the programming of each key, keep the remote
has three functions: (1) it the component code has its own volume/mute controls, such pro
pointed at the IR sensor of the device you are programming as some satellite receivers. va
the remote to control. toggles through all the video
or audio sources connected AU
Test the remote with the device to make sure the device
Advanced Punch-Through tim
to your TV or audio device;
de key is programmed with the correct code for maximum Volume Punch-Through, as described above, occurs tim
(2) when the remote is in
functionality. If some features don’t work, try a different automatically. If you want to specify whether Volume
VCR mode, this button
code. See the “Testing the Code for Maximum Functionality” Punch-Through is directed to the TV or AUDIO while in
toggles between VCR and
section below for more information. SAT•CBL•STRM, DVD, DVR•AUX1 or VCR•AUX2 modes, follow
the TV input; (3) when you’re
the steps below.
During the Manual Code Search, the remote ignores entering digital channel
keypresses that aren’t part of the search. numbers directly, this button Note: This option can also be enabled for an AUX key, if it is
e
lets you separate the main programmed with a VCR, DVR, DVD, CD, SAT or TV code.
he The search times out after two minutes (the indicator light
hat channel number from the 1. Press and hold the key whose volume commands you
blinks four times and turns off, and the last programmed
sub-channel number (such want to send to the TV or audio device. The indicator light
code under that device key is retained).
as 59.1). turns on.
The indicator light blinks four times and turns off when the Actual model may vary from illustration
remote has gone through all the codes. The remote exits the 2. While holding down the device key, press and hold the
es Manual Code Search. If your device hasn’t turned off yet, try VOL up key. The indicator light turns off.
t a different search method. IMPORTANT 3. After holding down both keys for 3 seconds, the indicator
light turns on and stays on. Release both keys.
Because this remote controls more than one device, you
, Testing the Code for Maximum Functionality must first “tell” the remote which device you wish to 4. Press and release the device key you want the Volume
operate. That means, if you wish to operate your TV, you Punch-Through to be directed to from the selected mode
1. Try a variety of the device’s functions with the remote. If
must first press the TV key to put the remote in the TV (TV, AUDIO or AUX key). The indicator light flashes, then
some features of your devices don’t work, go to the next
or a Mode. The remote stays in that device mode until you press turns off.
step to try a different code.
nd a different device key. For example, if your remote is in TV Note: The device key pressed in step 4 must be programmed
2. Repeat the Manual Code Search and Entry Method from Mode and you want to operate the DVD player, you must with a TV or AUDIO component. If an invalid key is pressed,
the beginning. When the device turns off for the first time, press the DVD key to change device modes. the LED flashes four times, then turns off.
eed don’t press the OK key, which would store the same code.
rt Instead, with the unit now off, continue to press the SKIP Important: Once you have programmed any device with a
FWD key repeatedly until the unit turns back on. specified Volume Punch-Through, the Volume Punch-Through
for all other devices defaults to AUDIO. If you do not want
other components’ Volume Punch-Through to default to
AUDIO, you must manually program them, using steps 1-4.
 Code Retrieval Problem: The device’s menu does not appear on the TV screen.
Once you’ve programmed the remote to control your devices, Troubleshooting • Make sure you have connected the device to your TV properly and
you may want to record the codes for future reference. If you selected the correct input. (See your devices’ Owner’s Manuals for
used the Direct Code Entry method, this is easy. Just find proper connection procedures.)
Problem: The remote does not operate your device. • Make sure the remote is in the correct mode by pressing the
the codes you entered and make a note of them in the boxes
ces below. If you used one of the Code Search methods to program • Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1, AUDIO, VCR•AUX2). This tells the remote which device to
your remote or if you used the Direct Entry method but don’t
e AUDIO, VCR•AUX2). This tells the remote which device to operate.
remember the code, you will need to retrieve each device’s
V, operate. • Menu access isn’t supported for all brands. You may need to use
five-digit code. Retrieving the actual code and writing it down
gn it. • Remove any obstacles between the remote and the device. Make your original remote control to access menu functions for some
will save you time if you ever need to program the remote
sure you’re aiming the remote at the device’s IR sensor. devices.
UX1 again. If the codes are recorded, you can use the Direct Entry
method to reprogram your remote to control your devices, • Make sure the batteries are fresh and are properly installed.
Replace the batteries with two new AAA batteries, if necessary For more information, please visit www.rcaaudiovideo.com
which is quick and easy.
y, (see the Battery Installation section). Consumer Help Line: 1-800-420-7968
he Indicator
light 1. Press and hold the device key Problem: The remote can’t be programmed to operate your
(TV, SAT•CBL•STRM, DVD, device. Care and Maintenance
AUDIO, VCR•AUX2, DVR•AUX1) • If you are testing the remote while programming it, you may be • Keep the remote dry. If it gets wet, wipe it dry immediately.
whose code you wish to retrieve. too far away from the device or at a wrong angle. There must be
• Use and store the remote only in normal temperature
The indicator light turns on. an unobstructed path between the remote and the IR sensor on
environments.
Keep pressing the device key. the device. Move closer and make sure you point the remote at the
device you’re trying to control. • Handle the remote gently and carefully. Don’t drop it.
• If you’re using the Direct Entry programming method to enter • Keep the remote away from dust and dirt.
2. While holding the device key down, press and hold the the codes for your brand and the unit is still not functioning • Wipe the remote with a damp cloth occasionally to keep it
INFO•OPTIONS key. The indicator light turns off. After properly, try the auto, brand, or manual search method. looking new.
holding down both keys for three seconds, the light turns • To control combo units, like TV/VCRs or TV/DVDs, you must • Modifying or tampering with the remote’s internal devices can
back on. program the individual corresponding device keys to control cause malfunction and invalidate its warranty.
3. Release both keys. The indicator light remains on. each part of the combo unit. Once programmed successfully, the
or TV key controls the TV functions, and the DVD or VCR•AUX2 key
4. Starting with the number 1 key, press and release each
UX1 controls the DVD or VCR functions.
number key on the keypad in the following order: 1-9, then
e you 0. The number that causes the indicator light to blink is the • Make sure the batteries are fresh and are properly installed.
first number of the code. As you find each number of the
code, write it down for future reference. Then start with the
Problem: The remote doesn’t perform commands properly. Limited Lifetime Warranty
number 1 key again. • Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1, Voxx Accessories Corp. (the “Company”) warrants to you the original retail
Note: All TV codes start with the number 1; all VCR and AUDIO, VCR•AUX2). This tells the remote which device to purchaser of this product that should it, under normal use and conditions,
DVR codes start with the number 2; all DVD players codes, operate. be proven defective in material or workmanship during its lifetime while you
the number 3; all audio device codes, the number 4; and all • Make sure device is ready (for example, the DVD player has a own it, such defect(s) will be repaired or replaced (at the Company’s option)
satellite receivers, cable boxes, streaming players, and digital disc loaded). without charge for parts and repair labor. To obtain repair or replacement
TV converters, the number 5. within the terms of this Warranty, the product is to be delivered with proof
s, • You may have pressed an invalid key for the mode the remote is in. of warranty coverage (e.g. dated bill of sale), specification of defect(s),
s 5. Repeat step 4 until you have retrieved all five numbers in • If you’re trying to enter a channel number directly, try pressing transportation prepaid, to the Company at the address shown below.
ly the code. After the fifth number is retrieved, the indicator the ENTER key after entering the channel number as this is a This Warranty does not cover product purchased, serviced or used outside
light blinks briefly, then turns off. requirement of certain models and brands. the United States or Canada. This Warranty is not transferable and does
with a • There is a possibility that a programmed code may only be not extend to costs incurred for installation, removal or reinstallation of
evices TIP: To exit the Code Retrieval Mode at any time, press the the product. This Warranty does not apply if in the Company’s opinion,
able to control some of your device features (for example, only
CLEAR key. the product has been damaged through alteration, improper installation,
turns a device on and off). To confirm that the device key is mishandling, misuse, neglect, accident, or the simultaneous use of different
here Note: If you press an invalid key during the Code Retrieval programmed with the correct code for maximum functionality, battery types (e.g. alkaline, standard or rechargeable).
uch process, the remote will not respond. If you do not press a test the device. Attempt to control a variety of the device’s
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
valid Code Retrieval key (TV, SAT•CBL•STRM, DVR•AUX1, functions with the remote. If some of the features of your LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
AUDIO, VCR•AUX2, INFO•OPTIONS, CLEAR), Code Retrieval devices don’t work, try programming the remote with a different EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
times out after 15 seconds. The indicator light blinks four code in the list using the Direct Code Entry Method, until you PAID BY PURCHASER FOR THE PRODUCT.
times, and then turns off. find the code that allows the remote to control the majority of
This Warranty is in lieu of all other express warranties or liabilities. ANY
your device’s functions. Different codes can provide different IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
levels of functionality. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
ollow TV CODE SAT•CBL•STRM CODE Problem: The indicator light does not come on when you press THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
a key. DAMAGES WHATSOEVER. No person or representative is authorized
t is to assume for the Company any liability other than expressed herein in
1 5 • You may have pressed an invalid key for the mode the remote is
connection with the sale of this product.
in.
Some states/provinces do not allow limitations on how long an implied
u • Make sure the remote is in the correct mode by pressing the warranty lasts or the exclusion or limitation of incidental or consequential
SAT STREAMING CABLE
light corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1, damage so the above limitations or exclusions may not apply to you. This
AUDIO, VCR•AUX2). This tells the remote which device to Warranty gives you specific legal rights and you may also have other rights,
operate. which vary from state/province to state/province.
e DVD CODE DVR•AUX1 CODE
• Make sure the batteries are fresh and are properly installed. U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York
Replace the batteries with two new AAA batteries, if necessary 11788
ator 3 (see the Battery Installation section). CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,
Unit 3, Door 16, Mississauga, Ontario L5T 3A5

e DVR/VCR DVD TV SAT•CBL•STRM

Problem: The remote will not change channels on device.
ode • Make sure the remote is in the correct mode by pressing the
hen corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO CODE VCR•AUX2 CODE AUDIO, VCR•AUX2). This tells the remote which device to
operate.
med
• Press the ENTER key after you enter a channel number.
d, 4 ©2013 Voxx Accessories Corp.
• Remove any obstacles between the remote and the device. Make 3502 Woodview Trace, Suite 220
sure to aim the remote at the IR sensor on the device.
a DVR/VCR DVD TV SAT•CBL•STRM Indianapolis, IN 46268
ough Trademark(s) ® Registered
RCR6473R US 04
4.