HLL linear LED lighting-hazardous area

Product introduction
HLL series is an extremely robust linear LED luminaire in an
aluminum housing with a polycarbonate diffuser for use in
zone 1, 2, 21 and 22 arduous environments.

The use of high quality LED chips coupled with Crouse-Hinds'

knowhow of taking heat away from the product in explosion-
proof equipment, ensures longevity in operation in addition
to the benefits of energy savings, contributing to a greener
environment, lower maintenance cost and hence achieving
overall lower cost of ownership.

Product features
Equivalent • Permissible ambient temperature:
Color Nominal
Model Length Wattage fluorescent
temp. lumens - Standard luminaire: -40˚C~+50˚C
luminaire
- Emergency luminaire: -25˚C~+50˚C
HLL-2-2L series 735mm 3000K Approx.2700
<30W 2x18W - Available in cool white 5700K or warm white 3000K
HLL-2-3L series 735mm 5700K Approx.2800
• Anti shock and vibration proof
HLL-4-4L series 1335mm 3000K Approx.5600
<60W 2x36W • Mercury-free
HLL-4-5L series 1335mm 5700K Approx.5700 • Instant ON without time delay
• Fixture life and years of maintenance-free operation
• Reliability
- Polycarbonate, 4J impact resistant Ambient No. of years at No. of years at
- Cooper free aluminum for excellent corrosion and heat temperature 24 hours usage 12 hours usage
transfer properties 25˚C 11 23
- IP66 protection 30˚C 11 23
- Suitable for zone 1, 2, 21 and 22 gas and dust 35˚C 10 21
40˚C 9 17
atmospheres
45˚C 7 14
- Highest temperature class T6
50˚C 5 9

Technical data
Ex marking Ex d e ib mb IIC T6 Gb
Ex tb IIIC T80°C Db
IECEx CoC IECEx CQM 16.0030X
Ambient temp -40°C to 50°C (Normal)
-25°C to 50°C (Emergency)
Rated input volt 100~240 VAC; 108~250 VDC
Power factor >0.9
CRI Cool white>70, warm white>80
System watt HLL 2 series: 2x14W
HLL 4 series: 2x28W
Lumen output HLL 2 series: 2800Lm, 5700K
HLL 4 series: 5700Lm, 5700K
HLL 2 series: 2700Lm, 3000K
HLL 4 series: 5600Lm, 3000K
Material Aluminum
Weight HLL 2 series Normal: 5kg
HLL 2 series Em: 6kg
HLL 4 series Normal: 10kg
HLL 4 series Em: 12kg
Terminals 6mm²
Out line dimension HLL 2 series: 735x180x130(mm)
HLL 4 series: 1335x180x130(mm)
Backup duration & lumen percentage EM1=1.5h, 25% output, EM2=3h, 25% output
IP (IEC60529) IP66
HLL linear LED lighting-hazardous area
Ordering logic
HLL -2 -W -2L -D -EM1 -1/6-225 -C -R -N
Product Zone Emergency Safety
Length Color temp Lumen output Entry size type Coating Replacement
group area duration switch
2
Alum linear -2=2 feet -Default= -2L=2700lm ( 2 feet, -D= Default=non emergency -1/6-120(125)=6mm Single-ended -Default=Cu-free Default=LED module Default=with
LED length cold temp, 5700K warm color only) Zone 1 version 1 x M20/1 x M25 Al cannot be replaced. safety switch
2
-4=4 feet -W=warm -3L=2800lm (2 feet, -EM1=1.5h, 25% output -1/6-220(225)=6mm Single-ended -C=Epoxy Coating -R=LED module can -N=Without
length 2 x M20/2 x M25
temp, 3000K cold color only) 1.5h, 50% output(2 Series) be replaced. safety switch
-2/6-120(125)=6mm2 Through
-4L=5600lm (4 feet, -EM2=3h, 25% output wiring 2-1 x M20/2-1 x M25
warm color only) -2/6-220(225)=6mm2 Through
-5L=5700lm ( 4 feet, wiring 2-2 x M20/2-2 x M25
cold color only)

Ordering information
Part No. Product type Ambient Ta Lumen output Colour temp. System watt. T code
CCL1622391 HLL-2-3L-D-1/6-120
-40˚C~+50˚C
CCL1622407 HLL-2-3L-D-2/6-120
2800Lm <30W
CCL1622423 HLL-2-3L-D-EM1-1/6-120
-25˚C~+50˚C
CCL1622439 HLL-2-3L-D-EM1-2/6-120
5700K T6
CCL1622775 HLL-4-5L-D-1/6-120
-40˚C~+50˚C
CCL1622791 HLL-4-5L-D-2/6-120
5700Lm <60W
CCL1622807 HLL-4-5L-D-EM1-1/6-120
-25˚C~+50˚C
CCL1622823 HLL-4-5L-D-EM1-2/6-120
* Default=IECEx certified; Suffix A=ATEX certified; Suffix B=GB certified
* Any other types, please contact Crouse-Hinds sales.

Dimension
Pipe mounting

Ceiling mounting Wall mounting

(6 W)
)
0W
35 30
13 45(
7

30 225 200
150
130

1600(30W)
2000(60W)
˚
135

735(30W) 183
1335(60W)
0˚
~1
80
˚

720(30W)
1200(60W)
Unit：mm

Polar curve
1168 2311

876 1734

584 1156

292 578

H
H
V V

HLL-2 series HLL-4 series

HLL linear LED lighting-hazardous area
Mounting accessories (To be ordered separately)

9
(8)7
5±0.21
30

25
D
Ø

30
9

5
200
90
M8

115
40
45˚

26
2

30°±

30
M8 2°
225 28
68

3-ø9
4-R
5

40±0.3
30

85±0.30
Ceiling mounting bracket Pipe clamp Wall mount bracket
Unit：mm

Pipe mounting
Part No Description Qty
CHR11076 Pipe clamp assy D42 316S/S 2
CHR11077 Pipe clamp assy D42 304S/S 2
CHR11078 Pipe clamp assy D42 plating 2
CHR11079 Pipe clamp assy D51 316S/S 2
CHR11080 Pipe clamp assy D51 304S/S 2
CHR11081 Pipe clamp assy D51 plating 2

Wall mounting
Part No Description Qty
CHR11073 Wall suspension 316S/S 2
CHR11074 Wall suspension 304S/S 2
CHR11075 Wall suspension plating 2

Ceiling mounting
Part No Description Qty
CHR11099 Ceiling mounting BKT 316S/S 2
CHR11100 Ceiling mounting BKT 304S/S 2
CHR11101 Ceiling mounting BKT plating 2
Ex-Linear light fitting with metal housing
for surface mounting
AB 12…LED / AB 12…E / AB 12…C
(Zone 1, 2, 21, 22)

The robust lighting concept The luminaire for all types of threaded cover, the large termi-
for hazardous areas applications nal compartment and the lamp
With its flameproof housing The AB 12 luminaire series with assembly on a guide carriage fa-
made of copper free aluminium G13 sockets for fluorescent cilitate servicing.
(Cu < 0.1 %), high degree of lamps are either fitted with elec- An optional external reflector
protection IP67 and a protective tronic (AB 12 .. E) or electromag- ensures an application-specific
tube made of borosilicate glass netic ballasts (AB 12 .. C). light distribution. The optional
with a high mechanical and The AB12LED series is intend- protective wire guard made of
thermal stability, this luminaire ed for use with LED tubes for stainless steel provides added
is the ideal solution for harsh direct connection without bal- safety.
and hazardous environments. last operation. The easy-to-open

Features
• Robust Ex-d housing
• For fluorescent lamps or LED-tubes
• Easy opening due to screw cover on end
• 2 individual circuits (double lamp version)
• Large terminal compartment
• High degree of protection IP67
 Ordering details
AB 12…LED / AB 12…E / AB 12…C

Ordering details
Type Content Terminals Through- Cable gland/ Threaded Order No.
wiring thread plug
single-ended

AB 12… LED for retrofit LED-tubes

AB 12220 LED1E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 331
metal thread
AB 12240 LED1E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 332
metal thread
AB 12265 LED1E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 333
metal thread
AB 12220 LED1E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 431
metal thread
AB 12240 LED1E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 432
metal thread
AB 12265 LED1E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 433
metal thread
AB 12… E with electronic ballast (EVG)
AB 12220 E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 300
(2 x 18 W) metal thread
AB 12240 E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 308
(2 x 36 W) metal thread
AB 12265 E 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 316
(2 x 58 W) metal thread
AB 12220 E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 500
(2 x 18 W) metal thread
AB 12240 E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 508
(2 x 36 W) metal thread
AB 12265 E 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 516
(2 x 58 W) metal thread
Scope of delivery without lamp and fixing accessories
Metal cable glands see catalogue part 2: 2.3.12 ff
 Ordering details / Accessories
AB12

Ordering details
Type Content Terminals Through- Cable gland/ Threaded Order No.
wiring thread plug
single-ended

AB 12… C with electro-magnetic ballast

AB 12220 C 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 346
(2 x 18/20 W) metal thread
AB 12240 C 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 354
(2 x 36/40 W) metal thread
AB 12265 C 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 362
(2 x 58/65 W) metal thread
AB 12220 C 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 546
(2 x 18/20 W) metal thread
AB 12240 C 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 554
(2 x 36/40 W) metal thread
AB 12265 C 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 562
(2 x 58/65 W) metal thread
AB 12… PL for PL-lamps
AB 12236 PL 1x3 x 2 x M25, 1 x M25 Ex-d NOR 000 005 060 569
(2 x 36 W PL) metal thread
AB 12236 PL 1x3 x 2 x 3/4'' NPT, 1 x 3/4'' Ex-d NOR 000 005 060 669
(2 x 36 W PL) metal thread
Scope of delivery without lamp and fixing accessories
Metal cable glands see catalogue part 2: 2.3.12 ff

Accessories
Type Content Application Order No.

LED tube 9 W 600 mm 1100 lm / 840 AB 12220 LED 1E 3 2475 901 012
LED tube 18 W 1200 mm 2300 lm / 840 AB 12240 LED 1E 3 2475 901 015
LED tube 27 W 1500 mm 3400 lm / 840 AB 12265 LED 1E 3 2475 901 018

Accessories
Type Content Application Order No.

Reflector RAB 220 Reflector, AISI 304 for AB 12220 . / AB 12236 PL NOR 003 045 060 403
Reflector RAB 240 Reflector, AISI 304 for AB 12240.. NOR 003 045 060 411
Reflector RAB 265 Reflector, AISI 304 for AB 12265.. NOR 003 045 060 429
Reflector GRAB 220 Reflector + wire guard ANSI 304 for AB 12220../AB 12236 PL NOR 003 045 060 479
Reflector GRAB 240 Reflector + wire guard ANSI 304 for AB 12240.. NOR 003 045 060 487
Reflector GRAB 265 Reflector + wire guard ANSI 304 for AB 12265.. NOR 003 045 060 495
Reflector RAB 220 Reflector, AISI 316 for AB 12220../AB 12236 PL NOR 003 165 060 403
Reflector RAB 240 Reflector, AISI 316 for AB 12240 NOR 003 165 060 411
Reflector RAB 265 Reflector, AISI 316 for AB 12265 NOR 003 165 060 429
Reflector GRAB 220 Reflector + wire guard ANSI 316 for AB 12220../AB 12236 PL NOR 003 165 060 479
Reflector GRAB 240 Reflector + wire guard ANSI 316 for AB 12240.. NOR 003 165 060 487
Reflector GRAB 265 Reflector + wire guard ANSI 316 for AB 12265 NOR 003 165 060 495
 Dimension drawing / Polar curve
AB 12…LED / AB 12…E / AB 12…C

Polar curve AB 12...LED/E/C AB 12...

103
90 90

25
236 Reflector RAB
50
60 60
75

100
30 30
125
C 0 0
C90 l/cd/klm Reflector with
236
wire guard GRAB
140

114
Wiring diagram AB 12 ... LED 1 E

optional entries, on request

entries
L M8x12mm
PE A

N
Type AB 12 LED 1 E
B

A B
AB 12220 652 707
AB 12240 1265 1320
AB 12265 1565 1620
AB 12236 PL 652 707

Dimensions in mm
 Technical data
AB12 / AB 12 LED

Technical data
AB 12 LED AB12 E

EC-Type Examination Certificate LOM 02 ATEX 2013 X LOM 02 ATEX 2013 X

IECEx Certificate of Conformity IECEx BKI 07.0008 X
Marking accd. to 94/9/EC D II 2 G Ex d IIB T6 Gb D II 2 G Ex d IIB T5 Gb
D II 2 D Ex t IIIC T85°C Db D II 2 D Ex t IIIC T76°C/T93°C Db
Marking accd. to IECEx Ex d IIB T5 /Ex d IIC T5
Ex tD A21 IP67 T7°C
Permissible ambient temperature -20 °C up to +40 °C (T6) -20 °C up to +  °C
Rated voltage max. 277 V 198 V - 254 V AC
175 V - 280 V DC
Frequency 50 - 60 Hz 50/60 Hz
Power factor cos M t 0.9 t 0.9
Circuit direct EVG
Protection class I I
Lamp / Illuminant 2 x T8 LED-tube 9 - 25 W or 2 x T26 / 18 - 58 W
2 x T8 LED-tube up to 50 W, both ends supply voltage (Retrofit)
Lamp cap G13 accd. to IEC 60061-1 G13 accd. to IEC 60061-1
Light output ratio 90 % 73%
Connecting terminals L, N and PE: 2 x 2, 5 mm² / PE ext. 2 x 6 mm² L1, N and PE: 2 x 2.5 mm2 / PE ext. 2 x 6 mm2
Enclosure colour grey grey
Enclosure material copper-free aluminium with powder coating copper-free aluminium with powder coating
Cable glands / gland plates / direct entry: 2 x 3/4“ NPT or 2 x M25 direct entry: 2 x 3/4“ NPT or 2 x M25
enclosure drilling 1 x Ex-d blanking plug 3/4“ or M25 1 x Ex-d blanking plug 3/4“ or M25
Degree of protection accd. to EN 60529 IP67 IP67
Protective cover / protective bowl borosilicate glass borosilicate glass
Ex-LED-Linear light fitting
eLLK/M 92 LED 400A / eLLK/M 92 LED 800A / eLLK/M 92 LED 400A NE / eLLK 92 LED 800A NE
(Zone 1, 2, 21, 22)

The efficient solution With the new Gen2 modules, our The advantages of the Operating life
for your explosion-protected LED linear luminaires are even LED module: • The expected operating life
lighting concept more efficient and brighter than • Environmentally friendly, of this LED module is up to
The explosion-protected linear before. In addition, they now also no mercury 90,000 hours. This is a signifi-
light fittings series eLLK/M 92 have an extended temperature cant improvement compared
• Shock and vibration resistant,
LED 400A/800A combines the range from -25 °C to +55 °C. The to traditional light sources.
no filament or glass to break
latest LED technology with the new eLLK-2/4-C/W LED module
• Immediate start, instant full • Heat sinks are specifically
protection of a reliable housing can also be used for converting
illumination engineered to remove heat
solution. As a result, this light existing eLLK/M 92 light fittings
from the LEDs to ensure a
fitting series is the ideal solu- with fluorescent lamps and an • No life time reduction due to longer life, better lumen
tion for lighting tasks in harsh electronic ballast (EVG 09) into switching cycles output and accurate colour
and hazardous environments. LED linear light fittings in just few
• Reduced disposal costs temperature.
simple steps.
• Fully operational with V-CG-S
Latest lighting technology The LED system design and
Energy and cost savings modules for connection to
for a proven lighting concept certification allow the use in the
• >20% energy savings com- CEAG central battery emer-
proved Ex e technology of the
As a leading manufacturer of ex- pared to fluorescent lamps gency lighting systems.
eLLK/M 92 light fittings. With the
plosion-protected luminaires, we • Also available as self-con-
use of our electronic ballast • Additional energy savings
have redesigned our revolutionary tained emergency luminaire
EVG 09 as the driver, we can rely due to operation on demand
LED module to fit into the eLLK 92 LED ... NE.
on more than 20 years successful (night/day and presence-
eLLK/M... linear light fitting se-
and safe operation in harsh and mode)
ries.
hazardous environments.
• Reduced maintenance costs Easy and cost-effective
compared to standard fluo- installation
rescent lamps Like all the luminaires in the
• Lower overall cost of eLLK lighting family, our stand-
ownership ard LED linear luminaires fea-
ture a single-ended through-
wiring, which, in conjunction
with the generously dimen-
sioned terminal compartment,
allows a cost-effective installa-
tion. The double-sided locking
facility with 10 or 20 latch points
allows the protective bowl to be
hinged on both sides, meaning
that the fitting can be mounted
on either side.

Features
• >20 % energy savings compared to similar fluorescent luminaires
• Special LED design with direct light distribution
• Proved technology; the EVG 09 has been used as a
driver for more than 20 years
• Various light colour temperatures available - 4000 K / 5700 K
• Selected LED chips with perfect binning, low power loss and
long life
• Ex-e technology for easy maintenance
• For ambient temperatures from -25 °C up to +55 °C
 Ordering details
eLLK/M 92 LED 400A/800A

Ordering details
Type Version Terminals Through-wiring Cable gland/ Threaded Blanking Order No
single-ended twin-ended thread plug plug

eLLK 92 LED 400A

eLLK 92 LED 400A 1/6-1K 1x6 x – 2 x M25, Plastic 1 1 2265 504 101
eLLK 92 LED 400A 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2265 504 103
eLLK 92 LED 400A 1/6-1M 1) 1 x 6 x – 2 x M20, Metal thread 1 x M20 1 2265 504 109
eLLK 92 LED 400A 2/6-2M 1) 2 x 6 – x 4 x M20, Metal thread 2 x M20 1 2265 504 111
eLLK 92 LED 800A
eLLK 92 LED 800A 1/6-1K 1x6 x – 2 x M25, Plastic 1 1 2266 504 101
eLLK 92 LED 800A 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2266 504 103
eLLK 92 LED 800A 1/6-1M 1) 1 x 6 x – 2 x M20, Metal thread 1 x M20 1 2266 504 109
eLLK 92 LED 800A 2/6-2M 1) 2 x 6 – x 4 x M20, Metal thread 2 x M20 1 2266 504 111
eLLM 92 LED 400A/800A
eLLM 92 LED 400A 1/3-1K 1x3 – – 1 x M25, Plastic 1 2268 504 101
eLLM 92 LED 800A 1/3-1K 1x3 – – 1 x M25, Plastic 1 2269 504 101
eLLK 92 LED 400 V-CG-S 2)
eLLK 92 LED 400 V-CG-S 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2265 516 103
eLLK 92 LED 400 V-CG-S 2/6-2M 1) 2 x 6 – x 4 x M20, Metal thread 2 x M25 1 2265 516 111
eLLK 92 LED 800 V-CG-S 2)
eLLK 92 LED 800 V-CG-S 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2266 516 103
eLLK 92 LED 800 V-CG-S 2/6-2M 1) 2 x 6 – x 4 x M20, Metal thread 2 x M25 1 2266 516 111
3)
eLLK 92 LED 400A NE
eLLK 92 LED 400A NE 1/6-1K 1x6 x – 2 x M25, Plastic 1 1 2260 587 101
eLLK 92 LED 400A NE 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2260 587 103
eLLK 92 LED 400A NE 1/6-1M 1) 1 x 6 x – 2 x M20, Metal thread 1 x M20 1 2260 587 109
eLLK 92 LED 400A NE 2/6-2M 1) 2 x 6 – x 4 x M20, Metal thread 2 x M20 1 2260 587 111
1)
eLLK 92 LED 400A NE 1/6-1M 1x6 – x 2 x M25, Metal thread 2 x M25 1 2260 587 609
eLLK 92 LED 400A NE 2/6-2M 1) 2 x 6 – x 4 x M25, Metal thread 4 x M25 1 2260 587 611
eLLK 92 LED 800A NE 3)
eLLK 92 LED 800A NE 1/6-1K 1x6 x – 2 x M25, Plastic 1 1 2261 587 101
eLLK 92 LED 800A NE 2/6-2K 2x6 – x 2 x M25, Plastic 2 x M25 1 2261 587 103
eLLK 92 LED 800A NE 1/6-1M 1) 1 x 6 x – 2 x M20, Metal thread 1 x M20 1 2261 587 109
1)
eLLK 92 LED 800A NE 2/6-2M 2x6 – x 4 x M20, Metal thread 2 x M20 1 2261 587 111
eLLK 92 LED 800A NE 1/6-1M 1) 1 x 6 – x 2 x M25, Metal thread 2 x M25 1 2261 587 609
eLLK 92 LED 800A NE 2/6-2M 1) 2 x 6 – x 4 x M25, Metal thread 4 x M25 1 2261 587 611
eLLM 92 LED 400A NE 3)
eLLM 92 LED 400A NE 1/3-1K 1x3 – – 1 x M25, Plastic 1 2273 587 101

Scope of delivery including LED-module, without fixing material. Metal cable glands see catalogue part 2: 2.3.12 ff
1) with metal thread, without cable gland
2) for operation with CEAG-emergency supply system
3) self-contained emergency light fitting
Accessories
Type Order No.

eLLK-2-C LED module for eLLK/M 92 018/18 incl. conversion kit for standard fluorescent light fittings - 5700 K CCL 1635 127
eLLK-4-C LED module for eLLK/M 92 036/36 incl. conversion kit for standard fluorescent light fittings - 5700 K CCL 1635 128
eLLK-2-C LED module for eLLK/M 92 018/18 LED Ready / eLLK 92 LED 400A - 5700 K CCL 1634 697
eLLK-4-C LED module for eLLK/M 92 036/36 LED Ready / eLLK 92 LED 800A - 5700 K CCL 1634 698
Single sided through wiring 2/6 with 2 entries M25, incl. terminals and mounting material 2 2218 602 000
Battery set Type 2710-3 with LED display and microprocessor-monitoring, complete 2 2710 904 000
Single sided through wiring 2/6 with 2 entries M25, incl. terminals and mounting material for eLLM 92 LED 400A/800A 2 2218 602 000
Protective bowl with green filter for eye wash safety shower facilities (eLLK 92 LED 400A) 2 2215 402 018
 Polar curve / Dimension drawing
eLLK/M 92 LED 400A/800A / NE

Polar curve eLLK/M 92 LED 400A/800A Polar curve eLLK/M 92 LED 400A/800A NE in emergency mode

90 90 90 90
100 100
75 75 75 75
200 200
60 60 60 60
300 300
45 400 45 45 45
400
30 30 30 30
15 500 15 500
15 15
0 0
C 0 C 0
C90 l/cd/klm C90 l/cd/klm

eLLK 92 LED 400A/800A

21 LED 400A = 732 eLLM 92...
LED 800A = 1332 33
188 150
LED 400A = 400 46
LED 800A = 700 M8, 14 deep
M25 x 1.5
65

Hexagon A/F 13
130

LED 400A = 760

LED 800A = 1360 33
Version 1/3
eLLK 92 LED 400A/800A NE
21 188 20
LED 400A = 400 150
M8, 14 deep LED 800A = 700 46
M25 x 1.5

65

Hexagon A/F 13
130

LED 400A = 900

33 Version 2/6
LED 800A = 1500
eLLM 92 LED 400A/800A
Hexagon A/F 13
eLLM 92 LED 800A 188
1060 = LED 400A
44
1660 = LED 800A
76
130

Hexagon A/F 13
736 = LED 400A eLLM 92 LED 400A
1336 = LED 800A Dimensions in mm
 Technical data
eLLK 92 LED 400A/800A

Technical data
eLLK/M 92 LED 400A eLLK/M 92 LED 800A

EC-Type Examination Certificate BVS 09 ATEX E 034 BVS 09 ATEX E 034

IECEx Certificate of Conformity IECEx BVS 09.0033 IECEx BVS 09.0033
Marking accd. to 2014/34/EU D II 2 G Ex db eb mb op is IIC T4 Gb D II 2 G Ex db eb mb op is IIC T4 Gb
D II 2 D Ex tb IIIC T80 °C Db IP66 D II 2 D Ex tb IIIC T80 °C Db IP66
Marking accd. to IECEx Ex db eb mb op is IIC T4 Gb Ex db eb mb op is IIC T4 Gb
Ex tb IIIC T80 °C Db Ex tb IIIC T80 °C Db
Permissible ambient temperature -25 °C up to +55 °C -25 °C up to +55 °C
IK-class according to IEC/EN 62262 IK 10 ^= 20 J IK 10 ^= 20 J
Rated voltage 110 V - 254 V AC 110 V - 254 V AC
110 V - 250 V DC 110 V - 250 V DC
Power consumtion 29 W 57 W
Frequency 50 - 60 Hz 50 - 60 Hz
Life expectancy LED module L 70 = 90.000 h at ta=25 °C L 70 = 90.000 h at ta=25 °C
Power factor cos M t 0.95 t 0.95
Circuit EVG EVG
Protection class I I
Immunity to surge voltages 4 kV, L - N and L - PE 4 kV, L - N and L - PE
according to EN 61000-4-5
Illuminance at measurement plane comparable with luminaires for fluorescent lamps comparable with luminaires for fluorescent lamps
CRI > 70 (>80 für 4000 K) > 70 (>80 für 4000 K)
Lamp / Illuminant eLLK-2-C - 2 x 13 W eLLK-2-C - 2 x 26 W
Light colour 5700 K (4000 K on request) 5700 K (4000 K on request)
Rated luminous flux of the luminaire 2700 lm (5700 K) / 2565 lm (4000 K) 5350 lm (5700 K) / 5085 lm (4000 K)
(typical, ± 10 %)
Dimensions (L x W x H) 760 x 188 x 130 mm (eLLK) 1360 x 188 x 130 mm
1060 x 188 x 130 mm (eLLM)
Connecting terminals L1, L2, L3, L, N, PE; max. 2 x 6 mm2 per terminal L1, L2, L3, L, N, PE; max. 2 x 6 mm2 per terminal
Enclosure colour RAL 7035 light grey RAL 7035 light grey
Enclosure material Glass-fibre reinforced polyester Glass-fibre reinforced polyester
Weight 7.2 kg (eLLK) / 9.2 kg (eLLM) 11.1 kg (eLLK) / 13.1 kg (eLLM)
Cable glands / gland plates / Ex-e cable glands M25 x 1.5 (plastic), Ex-e cable glands M25 x 1.5 (plastic),
enclosure drilling option: M20/M25 x 1.5 metal thread1) option: M20/M25 x 1.5 metal thread1)
Degree of protection accd. to EN 60529 IP66/IP67 IP66/IP67
Protective cover / protective bowl Polycarbonat Polycarbonat
1)
with dustcover if entry/thread is not closed
HPL pendant LED lighting-hazardous area
Product introduction
The Zone 1 HPL product series LED luminaires using high-
quality international brand LED chips, have extremely long
lifespan. Multiple version of the HPL LED are available,
providing ideal solutions for a wide range of applications.

HPL provides the same durability and reliability of a traditional

HID fixture, coupled with the low cost of ownership and
energy efficiency of Crouse-Hinds LED technology. High-
performance LEDs and a solid-state electronic driver provide
light where you need it, at a fraction of the operating costs of
HID lighting technologies.

Suitable for Zone 1 & Zone 2 Ex-gas and Zone 21/22 Ex-dust
hazardous area, such as heavy industrial, chemical, petrochemical
or pharmaceutical facilities, platforms, shipyard, electric power,
loading docks, wastewater treatment, paper mill.

Product features
• High efficient & Energy saving - Permissible temp. range:
Up to 66% energy-saving comparing to HID Luminaire. -40˚C~+40˚C/45˚C/50˚C(normal)
Nominal Equivalent HID Energy -40˚C~+45˚C(EM)
Model Wattage
lumens luminaire savings - Cold white 5700K & warm white 3000K are available
HPL-3L Approx.3000 Approx.30 70W-100W up to 58%
HPL-5L Approx.5000 Approx.50 100W-150W up to 66% • Anti shock and vibration
HPL-7L Approx.7000 Approx.70 150W-175W up to 60% • Mercury-free & lead free，environment protection
HPL-8L Approx.8000 Approx.80 150W-175W up to 60%
• Instant ON/OFF
• Industry-best safety reliability • Standard product provides pendant mount, optional
- Extremely low profile & light weight U shape yoke mount provide the greatest mounting
- Copper free aluminum housing, tempered and impact flexibility: wall mounting, ceiling mounting, pole
resistant glass globe, heat & corrosion proof mounting and etc.
- IP66 protection • Fixture life and years of maintenance-free operation
- Suitable for Zone 1 & Zone 2, Zone 21 & Zone 22 both Ambient No. of years at No. of years at
gas and dust Ex - hazardous area temperature 24 hours usage 12 hours usage
25˚C 11 23
• Perfect temperature and optical performance for wide 30˚C 11 23
application 35˚C 10 21
- Best T- rating: T6 40˚C 7.5 15
45˚C 6 11
50˚C 5 9

Ordering logic
HPL -3L -W -1M -S886 -T1 -F -1P -B1 EM1
Series Total Color Entry Emergency
Entry Qty. Terminal Glass Entry acc. Mounting type
No. Lm temperature size duration*
HPL -3L=3000 Default=5700K -1M=M20 Defult=1 entry -T1=Pillar terminal Default=Clear Default=one unplugged entry Default=G3/4 Pendant mout only Default=Non
-5L=5000 -W=3000K -2M=M25 -S886=Two -T2=MK 6/3 glass -1P=Two entries,1 plastic plug, -B1=With Painted bracket mount only emergency
-7L=7000 -D1=Direct entries -T3=MK 6/6 -F=Foggy 1 opening -B2=With 304SST bracket mount only EM1= 1.5H, 30%
-8L=8000 entry M25* -T4=MUT 4(3 pole) glass -2G=Two entries,plastic gland -B3=With 316SST bracket mount only output
-T5=MUT 4(6 pole) each -B4=With both Painted bracket mount, also EM2= 3H, 15%
-3G=Two entires,with 1 plastic availibale for G3/4 Pendant mount output
plug, 1 plastic gland -B5=With both 304SST bracket mount, also
availibale for G3/4 Pendant mount
-B6=With both 316SST bracket mount, also
availibale for G3/4 Pendant mount
-B7=G3/4 Pendant mount, also with mounting
bracket hole cut, but bracket need to order
separated.
-B8=Only with mounting bracket hole cut,
mounting bracket need to be ordered separated.

*If choosing -D1, then -S886/-T1/-1P were not suitable.

*Emergency only available for 5L.
*If choosing emerncy version, then only T2 and T4 terminal were available.
*Warm color was not suitble for 7L and 8L.
 HPL pendant LED lighting-hazardous area
Technical data
EC-Type Examination Certificate EPT 16 ATEX 2405X
IECEx-Certification of Conformity IECEx CQM 15.0054X
GB Certificate GYJ15.1157X
Marking accd.to 94/9/EC II 2 G Ex db eb mb op is IIC T6 Gb
II 2 D Ex tb op is IIIC T80˚C Db
Marking accd. to IECEx Ex db e mb IIC T6 Gb
Ex tb IIIC T80˚C Db IP66
Marking accd. to GB Ex d e mb IIC T6 Gb
Ex tD A21 IP66 T80˚C
Power consumption Refer to below table
Rated voltage AC 100V - 240V 50/60Hz; DC 108-250V
THD <15%
Power factor ≥ 0.9
Cable entry 2xM25x1.5 or 2xM20x1.5, 1 entry plugged
Terminal L, N, PE; solid: 0.5mm2-6mm2; flexible: 0.5mm2-4mm2
Permissible ambient temperature -40˚C~+40˚C/45˚C/50˚C (Normal); -40˚C~+45˚C (EM)
Degree of protection IP66
Insulation class I
Dimension Ø250 x 174 (mm)
Net weight <5kg, <6.5kg (EM)
Emergency lumen output EM1=1.5H, 30% output; EM2= 3H, 15% output

Ordering information
Part no. Product type Ambient Ta Lumen output Colour temp. System watt. T code
CCL1608595 HPL-5L-2M-S886-T2-1P-B1
-40˚C~+50˚C 5000lm 50W
CCL1608610 HPL-5L-2M-S886-T2-1P-B4
CCL1609075 HPL-7L-2M-S886-T2-1P-B1
7000lm 5700K 70W T6
CCL1609090 HPL-7L-2M-S886-T2-1P-B4
-40˚C~+50˚C
CCL1614397 HPL-5L-2M-S886-T2-1P-B1-EM1
5000lm 50W
CCL1614781 HPL-5L-2M-S886-T2-1P-B1-EM2

Dimension
148
284
130
90(2-ø9) G3/4x20max.

285
276

248
208

ø250
Project 1 Project 1 Project 1
Normal version
07.09.2017 07.09.2017 07.09.2017 Emergency version 07.09.2017

Operator Operator Operator Operator

Telephone Telephone Telephone Telephone
Fax Fax Fax Fax
e-Mail e-Mail e-Mail e-Mail

Polar curve / Luminaire

aton's Crouse Hinds With Lens With Clear GlassEaton's Data
Lighting WithSheet
Lens With ClearEaton's Luminaire
Glass /Crouse HindsData
With Sheet Glass / Luminaire
Lens With Clear Eaton's Data
Crouse Hinds WithSheet
Lens With Clear Glass / Luminaire Data Sheet

HPL-3L
Luminous emittance 1: HPL-5L
Luminous emittance 1: HPL-7L
Luminous emittance 1: HPL-8L
Luminous emittance 1:
e catalog for an image of the See our luminaire catalog for an image of the See our luminaire catalog for an image of the See our luminaire catalog for an image of the
luminaire. luminaire. luminaire.

fication according to CIE: 98 Due to missing

Luminaire symmetry
classification properties,
according no 98
to CIE: UGR table Luminaire classification
Due to missing according
symmetry to CIE:no98UGR table
properties, Due to missing
Luminaire symmetry
classification properties,
according no 99
to CIE: UGR table Due to missing symmetry properties, no UGR table
0 95 99 98 100 can
CIE becode:
flux displayed
60 95 for99
this98
luminaire.
100 CIEcan
fluxbe
code: 59 94for
displayed 99this
98luminaire.
100 canflux
CIE be code:
displayed
59 94 for 99
this99
luminaire.
100 can be displayed for this luminaire.
 Product of Manufacture: CN
LPL Ex High Power LED @][\h
Product Introduction
The Zone 1 LPL product Series LED Luminaires are designed to provide full-
spectrum, white light. Multiple version of the LPL LED are available, providing
ideal solutions for a wide range of applications.

LPL offering provides the same durability and reliability of a traditional HID
fixture, coupled with the low cost of ownership and energy efficiency of
Crouse-Hinds LED technology. High-performance LEDs and a solid-state
electronic driver provide light where you need it, at a fraction of the operating
costs of HID lighting technologies.

Suitable for Zone 1 & Zone 2 Ex-gas and Zone 21/22 Ex-dust hazardous area, such
as heavy industrial, chemical, petrochemical or pharmaceutical facilities, platforms,
shipyard, electric power, loading docks, wastewater treatment, paper mill.

Product Features
U High Efficient U Standard products are suitable for pendant mount.
Optional mounting accessories U shape bracket and pole
Nominal Equivalent HID
Model Wattage mounting bracket is also available. Provides the greatest
Lumens Luminaire
mounting flexibility, it can be installed as ceiling wall
LPL18-C57-4L 4270lm 43W 70W-100W
mount And pole mount. Please refer to below drawing
LPL18-C57-5L 4994lm 53W 70W-100W
LPL18-C57-6L 6418lm 62W 150W-175W for details.
LPL18-C57-7L 6680lm 70W 150W-175W
LPL18-C57-9L 8998lm 87W 175W U Lead-free and environment-friendly
LPL18-C57-10L 9974lm 105W 250W
LPL18-C57-12L 11700lm 125W 250W-400W
LPL18-C57-14L 13721lm 141W 400W
U LPL LED Benefits:
- Instant illumination and restrike
*Warm color limen Please contact Crouse-Hinds sales.
- Cold temperature operation / no warm-up required
- Redundancy in drivers with multiple series circuits
U Outstanding Safety & Reliability; Robust connected to each driver to avoid complete loss of
Construction, Maintenance Free illumination
- Copper free aluminum housing, temped and impact - Energy-efficient technology - up to 65% energy savings
resistant glass globe, heat & corrosion proof.
over HID fixtures
- IP66 Protection.
- Contains no mercury or other hazardous substances
- Ex de design, suitable for Zone 1 & Zone 2, Zone 21 &
- Shock- and vibration-resistant solid-state luminaires
Zone 22 both gas and dust Ex - hazardous area.
have no filaments or glass components that could
U Perfect Temperature and Optical Performance for break - greatly reduces the risk of premature failure
Wide Application - Dark sky compliant
- Best T- Rating: T6/T5 - Life time ≥ 50,000h@55°C for 4L~12L
- Permissible temp. range: - Life time ≥ 50,000h@40°C for 14L*
-40˚C~+40˚C/+45˚C/+55˚C(Nor) *14L was certified at 55°C, for life time of 55°C,
-40˚C~+55˚C(EM) pls contact Crouse-Hinds sales.
- Standard product cool white 5700K LED
- Warm white 3000K is available for special environment
such as smoke and dust environment.
LPL Ex High Power LED @][\h
Technical Information
Marking acc. to ATEX II 2 G Ex db eb IIC T6/T5 Gb
II 2 D Ex tb IIIC T80˚C/T95˚C Db
ATEX Cert EPT 17 ATEX 2592X
Marking acc. to IECEx Ex db eb IIC T6/T5 Gb
Ex tb IIIC T80˚C/T95˚C Db
IECEx Cert IECEx CQM 16.0043X
Marking acc. to GB Ex d e IIC T6/T5 Gb
Ex tD A21 T80˚C/T95˚C
GB Cert GYJ17.1005X
EMC compliance EN55015:2006+A1:2007+A2:2000; EN61000-3-2:2006+A1:2009+A2:2009;
EN61000-3-3:2008; EN61000-6-2:2005; EN61547:2009
LED light source PHILIPS LUMILEDS Luxeon series LED chips
Rated voltage Nor: 100~277V AC 50/60Hz, 127~250V DC
EM: 100~240V AC 50/60Hz, 127~250V DC
THD <15% @120V~230V AC
<20% @277V AC
Power factor ≥ 0.9
CRI 5700K(CRI 70)/ 3000K(CRI 80)
Cable entry 2xM25x1.5 or 2xM20x1.5, 1 entry plugged
Terminal L, N, PE; solid: 0.5mm2-6mm2; Flexible: 0.5mm2-4mm2
Permissible ambient temperature -40˚C~+40˚C/45˚C/55˚C(Nor)ᵫ-40˚C~+55˚C(EM)
Degree of protection IP66
Insulation class I
Dimension Ø350 x 240 (mm)
Net weight Nor: 17kg, EM: 20kg

Ordering Logic
LPL 18 -C57 -5L -V07* -1M -LT1 -FG -EM1 -NB*
LED color Total Entry Temperature Narrow
Series LED qty Driver voltage Glass Emergency Duration
temperature Lumen size range Beam
LPL 18= ≥18PCS C57=COOL WHITE 5700K 4L= 4270 lm V07:100-277V AC 1M= M20 LT1=-40ć~55ć FG=Frosted glass Default=Non-Emergency Default=Wide Beam
LED ARRYS W30=WARM WHITE 3000K 5L= 4994 lm 50/60Hz 127-250V DC 2M= M25 LT2=-40ć~50ć CG=Clear glass EM1=100% lumen output(4L) NB=Narrow Beam
6L= 6418 lm V09:100-240V AC LT3=-40ć~45ć EM2=35% lumen output(6L&7L)
7L= 6680 lm 50/60Hz 127-250V DC LT4=-40ć~40ć EM3=25% lumen output(6L&7L)
9L= 8998 lm
10L= 9974 lm
12L= 11700 lm
14L= 13721 lm

*ᵹV07 suitable for normal version, V09 suitable for emergency version, NB only suitable for clear glass

Ordering Code of Typical Type(mounting accessories ordered separately, see next page)
Lumen Color System Input LED Ambient Ta Code TC(Dust)
Part No. Product Type
Output Temp Watt Valtage Qty Ta (Gas) Dust Temp
CCL1624878 LPL18-C57-4L-V07-2M-LT1-CG 4270lm 43W 40 T6 T80˚C
CCL1624879 LPL18-C57-5L-V07-2M-LT1-CG 4994lm 53W 50 T6 T80˚C
CCL1624880 LPL18-C57-6L-V07-2M-LT1-CG 6418lm 62W 60 T6 T80˚C
100~277VAC
CCL1624801 LPL18-C57-7L-V07-2M-LT1-CG 6680lm 70W 30 T6 T80˚C
5700K 50/60Hz -40ć~+55ć
CCL1624803 LPL18-C57-9L-V07-2M-LT1-CG 8998lm 87W 40 T6 T80˚C
CCL1624804 127~250VDC
LPL18-C57-10L-V07-2M-LT1-CG 9974lm 105W 44 T6 T80˚C
CCL1624805 LPL18-C57-12L-V07-2M-LT1-CG 11700lm 125W 52 T5 T95˚C
CCL1624807 LPL18-C57-14L-V07-2M-LT1-CG 13721lm 141W 60 T5 T95˚C

*Default= IECEx certified; suffix A= ATEX certified; suffix B=GB certified

LPL Ex High Power LED @][\h
Mounting Accessories (Order separately)
Material Code Product Description
CCL1202180 Standard U mounting bracket
CCL1624750 Universal mounting bracket, painted steel
CCL1076003 Pole mounting bracket, painted steel

Installation and Dimension

335.5
60

18

18
0˚

0˚
Standard U mounting Ceiling mounting Wall mounting Pole mounting
bracket

R25

R15

250 230

40
Ø17 2-Ø13
160
277

Universal U mounting Universal mounting Standard mounting

bracket bracket bracket

Pole mounting bracket

Note: 1. Scope of supply exclude pole mounting accessories, please purchase separately.
2. As shown in figure, angle locator is included, to install the bracket vertically to adjust the aim light to 90˚ past vertical.