GPS Tracker Manual

GT01

1．Install mobile phone card

Select the SIM card(in maximum size) with GSM (GPRS) network.

Open cover with screwdriver, insert the SIM card( shown as the below right picture). The

device default shut down, insert the phone card automatically power on.

After you insert your cell phone card, please dial the SIM card mobile phone number, after

dial tone, then hang up the device, which means normal reading card.

1/6
2.Wiring

Red is positive, black is negative yellow is ACC

Battery voltage: DC 12-100V

3.LED Status

Orange LED--- GSM signal status

Light On = GSM network connected Flash =GSM network searching or No SIM card

Blue LED: GPS signal status

Light On = GPS positioned Flash = No GPS Signal or GPS searching

Red LED: Battery status

Flash = Working Light Off = No Power

4.Set APN

First, setting up APN (If incorrect setting of APN, could not use the monitoring platform). If

you are unsure of the SIM card APN you are using, please call the operator.

For examples:

APN=cmnet APN User name=blank APN Password=blank

Type message: apm123456 cmnet reply: apn ok

APN=Internet APN User name=gprs APN Password=0000

Type message: apm123456 internet reply: apn ok

Type message: apmuser123456 gprs reply: apnuser ok

Type message: apm123456 0000 reply: apnpasswd ok

5.Monitoring platform

Log in http://3.tkstargps.net Input tracker ID number:

2/6
 APP download；

IOS Android

Log in as the below pictures show

6.Set IP

3/6
 If you want to use the custom monitoring platform, please change the IP address and port

number in the following instruction format.

Instruction format: ip+ space + IP address + space + port

Example: IP 106.3.230.234 8185 (this IP address is default to the device)

Reply: SET OK

7.Set authorization number

The authorization number has the main authorization number and the secondary

authorization number. Only the main authorization number can modify the password and send

the modification instructions.

Set the main authorization number: 101#13800138000#

Setting the secondary authorization number: 102#13800138001#

Setting the secondary number: 103#13800138002#

Query authorization number: C10#, the device replies as follows: 101#13800138000

102#13800138001 103#13800138002

No more than 2 secondary authorization numbers are allowed to set. After the authorization

number is set, only the authorized number can send command, and the unauthorized number

can not send. After setting the authorization number, all alerts can be sent to the authorization

number.

8.ACC setting

The orange ACC line must be properly connected.Connecting the ACC line when the engine is

at start state, the the equipment will be into non alarm state automatically. If the ACC line is

switched on when the engine is switched off, the device automatically enters a state of

fortification.

Fortification status: turn on the engine to start the alarm to the authorized number.

Non alarm state: turn off the engine alarm.

You can use SMS or platform to send instructions to the equipment for non alarm and

alarm(fortification) settings, set as follows:

Fortification: ACCLOCK, 123456,1 device reply: set successfully

4/6
Non alarm: ACCLOCK, 123456,0 device reply: set successfully

9. Vibration alarm function

The tracker is equipped with a vibration sensor, vibration alarm can be set to SMS alarm and

telephone call alarm, the setting method is as follows;

SMS alarm: 125# delete this setting: 126#

Telephone alarm: 122# removes this setting: 121# (device is without microphone, can not hear

the sound from car)

10.SMS alarm switch

If you do not need SMS alarm, avoid harassment, you can set as follows;

Close SMS alarm, edit SMS and send: CF Open SMS alarm: SF

11.Change the password

Modify the command password, edit SMS and send: password123456 666888 to your device

phone number, device reply: password OK (666888 is your new password)

12.Over speed alarm function

Set the maximum speed value of your vehicle. If it is overspeeding, it will send an alarm

message or call 3 authorization numbers. The setting method is shown as follows;

Turn on over speed alarm: edit SMS and send: speed123456 080 (080: maximum speed limit 80

km / h)，device reply: speed OK

5/6
 Shutdown over speed alarm: edit SMS and send: speed123456 000，device reply: speed OK

13.Electronic fence

With the current vehicle as the center, a circular electronic fence can be set up for vehicle

movement for alarm. The setting method is shown as follows:

Turn on the electronic fence, edit message and send: move 300 (300:300 meters radius)

device reply: move OK

14.Assistant instruction

1.1 Restore factory settings,text and send：FORMAT

Device reply：Restore factory value successfully.Please reset the owner's number!

1.2 Query device information：CXZT

Reply：

XM_GT09_SW_20.0 2017/03/13
ID:6170711018
IP:106.3.230.225 8185
BAT:3
APN:CMMTM
GPS:A-25-00
GSM:17
ICC89860116851015935693
Frequently-used Command
短 信 指 令 回复(reply) 指令释义 explana on
(commmand)

admin123456 admin ok Set car boss phone number ， Set at most 1

136******** Authoriza on Numbers. The last se%ng is valid.

password123456 password ok 修改车主密码指令，密码为 6 位纯数字(默认车主密码

666888 为：123456,例修改为 666888 新密码）
Modify password:To change the password ， send a
message ： password+“old password”+space+“new
password” Reply：password ok
101#136******* OK car boss phone number
*#

102#136******* OK 102 为第一个 SOS 特定号码 102 is first SOS number

*#

103#136******* OK 103 为第二个 SOS 特定号码 103 is second SOS number

*#

D101# OK D101# 表示删除 第一个号 码 D101# means delete first

number

D102# OK D102#表示删除第二个号码 D102# means delete second

number

D103# OK D103# 表示删除第三个号码 D103# means delete third

number

C10# 101# 102# 查询特定号码 search number

103#

pwrsms123456,1 pwr sms 开启断电短信报警 turn on engine sms alarm

alarm set ok

pwrsms123456,0 pwr sms 关闭断电短信报警 turn off engine sms alarm

alarm set ok

pwrcall123456,1 pwr call 开启断电电话报警 turn on engine call alarm

alarm set ok

pwrcall123456,0 pwr call 关闭断电电话报警 turn off engine call alarm

alarm set ok
ACCLOCK,123456, OK 短信设置 ACC 自动设防开 SMS set ACC auto security on
1

ACCLOCK,123456, OK 短信设置 ACC 自动设防关 ACC set ACC auto security off

0

ACCLT,123456,3 OK （3 表示 3 分钟后自动设防）短信设置自动设防时间
SMS set auto security me(3 means a;er 3 minutes auto
security)
accsms123456,1/ ACC 非法启动短信报警 ACC turn on sms alarm
0

acccall123456,1/0 ACC 非法启动电话报警 ACC turn on call alarm

125# OK 开启振动短信报警 turn on shake sms alarm

126# OK 关闭振动短信报警 turn off shake sms alarm

122# OK 开启振动电话报警 turn on shake call alarm

121# OK 关闭振动电话报警 turn off shake call alarm

vib me123456,n vib me set 设置震动报警持续时间短信指令， 1-15 秒 n(0~15),0

ok 取消振动报警，默认 3 秒，即振动持续 3 秒报警 n(0-
15) 0 cancel shake alarm, default value is 3 seconds,
3seconds shake alarm
sossms123456( 默 sossms ok SOS 报警短信打开指令 turn on sos SMS alarm
认)

no sossms123456 no sossms ok SOS 报警短信关闭指令 turn off sos SMS alarm

soscall123456( 默 soscall ok SOS 报警电话打开指令 turn on sos call alarm

认)

no soscall123456 no soscall ok SOS 报警电话关闭指令 turn off sos call alarm

88 OK 远程监听 车主号码或者特定号码发送此指令到终端
SIM 卡号时，终端回拨电话实现监听功能
 注意：实现此功能需先设置好车主号码和 SOS 特定号
码 when the device call center or call the owner,the
device can monitor with owner.Note:need to set a
specific munber at first
123 ok SMS 短信查询位置信息 search loca on at sms

speed123456 000 speed ok 关闭超速短信通知 turn off overspeed SMS alarm

(默认)

speed123456 080 speed ok 开启超速短信通知 speed123456 080 设置速度上

限 80 公里 / 小时 turn on overspeed SMS , speed123456
080 means speed is 80KM/H
move123456 300 move ok 位移报警设置指令 300 表示： 300 米后报位移报
警 。 Set move alarm ,300m means: when the device
move 300m, will be send SMS alarm
SF SF OK 短信设防 SMS set security on

CF CF OK 短信撤防 SMS set security off

CQ system reset 设备重启 device reset

OK!

FORMAT OK 恢复出厂设置 reset

CXZT OK 查询设备信息 search device info

apn123456 cmnet apn ok 设置 APN 指令格式 set APN command

apnuser123456 apnuser ok 设置 APN 对应的用户名指令格式

user

apnpasswd12345 apnpasswd 设置 APN 对应的密码指令格式 set APN password

6 password ok

IP set IP OK 短 信 指 令 ： IP+ 空 格 +IP 地 址 + 空 格 + 端 口 号

219.143.106.193
8500 Set IP accress SMS command: IP+space+IP
address+space+ port
DW5 OK 单次工作模式（休眠状态下，可设定单次工作时长，
单位为分钟） 工作 5 分钟进入后进入默认工作模式

upmove123456 Set OK 上传间隔设置（默认 120 秒） set upload me(default

120 120s)

CXZT 查询设备状态回复：设备软件版本， ID ，IP，电量，

工作模式：M 为单次，A 为自动，C 为连续 ，还有上
传间隔 search device state: version number,ID,IP,baIery,
work mode: M is one me. A is auto, C is con nuous,
upload me
FREQ,123456.30 OK ACC ON 上传间隔 30 表示 30 秒 ACC ON upload
30 means: 30 seconds

STATLC,123456.40 0K ACC OFF 上传间隔 40 表示 40 秒 ACC OFF upload

40 means: 40 seconds

sleep,123456,10 OK 打开休眠 10:表示 10 分钟 0: 表示不

休眠 turn on sheep 10 means:10 min 0:not sheep

zone123456 e08 OK 修改时区 E08：表示东八区 change me

zone E08: East eight area

109# OK 中英文切换 chinese/english

G1234 OK 回 复 谷 歌 链 接 （ 国 外 ） SMS posi on google

link （ please note do not log in the tracking plaLorm
hIp://3.tkstargps.net when u send this command ）